Install and configure controller node

Install and configure controller node

This section describes how to install and configure the Block Storage service, code-named cinder, on the controller node. This service requires at least one additional storage node that provides volumes to instances.

Prerequisites

Before you install and configure the Block Storage service, you must create a database, service credentials, and API endpoints.

  1. To create the database, complete these steps:

    • Use the database access client to connect to the database server as the root user:

      $ mysql -u root -p
      
    • Create the cinder database:

      CREATE DATABASE cinder;
      
    • Grant proper access to the cinder database:

      GRANT ALL PRIVILEGES ON cinder.* TO 'cinder'@'localhost' \
        IDENTIFIED BY 'CINDER_DBPASS';
      GRANT ALL PRIVILEGES ON cinder.* TO 'cinder'@'%' \
        IDENTIFIED BY 'CINDER_DBPASS';
      

      Replace CINDER_DBPASS with a suitable password.

    • Exit the database access client.

  2. Source the admin credentials to gain access to admin-only CLI commands:

    $ source admin-openrc.sh
    
  3. To create the service credentials, complete these steps:

    • Create a cinder user:

      $ openstack user create --domain default --password-prompt cinder
      User Password:
      Repeat User Password:
      +-----------+----------------------------------+
      | Field     | Value                            |
      +-----------+----------------------------------+
      | domain_id | default                          |
      | enabled   | True                             |
      | id        | bb279f8ffc444637af38811a5e1f0562 |
      | name      | cinder                           |
      +-----------+----------------------------------+
      
    • Add the admin role to the cinder user:

      $ openstack role add --project service --user cinder admin
      

      Note

      This command provides no output.

    • Create the cinder and cinderv2 service entities:

      $ openstack service create --name cinder \
        --description "OpenStack Block Storage" volume
      +-------------+----------------------------------+
      | Field       | Value                            |
      +-------------+----------------------------------+
      | description | OpenStack Block Storage          |
      | enabled     | True                             |
      | id          | ab3bbbef780845a1a283490d281e7fda |
      | name        | cinder                           |
      | type        | volume                           |
      +-------------+----------------------------------+
      
      $ openstack service create --name cinderv2 \
        --description "OpenStack Block Storage" volumev2
      +-------------+----------------------------------+
      | Field       | Value                            |
      +-------------+----------------------------------+
      | description | OpenStack Block Storage          |
      | enabled     | True                             |
      | id          | eb9fd245bdbc414695952e93f29fe3ac |
      | name        | cinderv2                         |
      | type        | volumev2                         |
      +-------------+----------------------------------+
      

    Note

    The Block Storage services requires two service entities.

  4. Create the Block Storage service API endpoints:

    $ openstack endpoint create --region RegionOne \
      volume public http://controller:8776/v1/%\(tenant_id\)s
      +--------------+-----------------------------------------+
      | Field        | Value                                   |
      +--------------+-----------------------------------------+
      | enabled      | True                                    |
      | id           | 03fa2c90153546c295bf30ca86b1344b        |
      | interface    | public                                  |
      | region       | RegionOne                               |
      | region_id    | RegionOne                               |
      | service_id   | ab3bbbef780845a1a283490d281e7fda        |
      | service_name | cinder                                  |
      | service_type | volume                                  |
      | url          | http://controller:8776/v1/%(tenant_id)s |
      +--------------+-----------------------------------------+
    
    $ openstack endpoint create --region RegionOne \
      volume internal http://controller:8776/v1/%\(tenant_id\)s
      +--------------+-----------------------------------------+
      | Field        | Value                                   |
      +--------------+-----------------------------------------+
      | enabled      | True                                    |
      | id           | 94f684395d1b41068c70e4ecb11364b2        |
      | interface    | internal                                |
      | region       | RegionOne                               |
      | region_id    | RegionOne                               |
      | service_id   | ab3bbbef780845a1a283490d281e7fda        |
      | service_name | cinder                                  |
      | service_type | volume                                  |
      | url          | http://controller:8776/v1/%(tenant_id)s |
      +--------------+-----------------------------------------+
    
    $ openstack endpoint create --region RegionOne \
      volume admin http://controller:8776/v1/%\(tenant_id\)s
      +--------------+-----------------------------------------+
      | Field        | Value                                   |
      +--------------+-----------------------------------------+
      | enabled      | True                                    |
      | id           | 4511c28a0f9840c78bacb25f10f62c98        |
      | interface    | admin                                   |
      | region       | RegionOne                               |
      | region_id    | RegionOne                               |
      | service_id   | ab3bbbef780845a1a283490d281e7fda        |
      | service_name | cinder                                  |
      | service_type | volume                                  |
      | url          | http://controller:8776/v1/%(tenant_id)s |
      +--------------+-----------------------------------------+
    
    $ openstack endpoint create --region RegionOne \
      volumev2 public http://controller:8776/v2/%\(tenant_id\)s
    +--------------+-----------------------------------------+
    | Field        | Value                                   |
    +--------------+-----------------------------------------+
    | enabled      | True                                    |
    | id           | 513e73819e14460fb904163f41ef3759        |
    | interface    | public                                  |
    | region       | RegionOne                               |
    | region_id    | RegionOne                               |
    | service_id   | eb9fd245bdbc414695952e93f29fe3ac        |
    | service_name | cinderv2                                |
    | service_type | volumev2                                |
    | url          | http://controller:8776/v2/%(tenant_id)s |
    +--------------+-----------------------------------------+
    
    $ openstack endpoint create --region RegionOne \
      volumev2 internal http://controller:8776/v2/%\(tenant_id\)s
    +--------------+-----------------------------------------+
    | Field        | Value                                   |
    +--------------+-----------------------------------------+
    | enabled      | True                                    |
    | id           | 6436a8a23d014cfdb69c586eff146a32        |
    | interface    | internal                                |
    | region       | RegionOne                               |
    | region_id    | RegionOne                               |
    | service_id   | eb9fd245bdbc414695952e93f29fe3ac        |
    | service_name | cinderv2                                |
    | service_type | volumev2                                |
    | url          | http://controller:8776/v2/%(tenant_id)s |
    +--------------+-----------------------------------------+
    
    $ openstack endpoint create --region RegionOne \
      volumev2 admin http://controller:8776/v2/%\(tenant_id\)s
    +--------------+-----------------------------------------+
    | Field        | Value                                   |
    +--------------+-----------------------------------------+
    | enabled      | True                                    |
    | id           | e652cf84dd334f359ae9b045a2c91d96        |
    | interface    | admin                                   |
    | region       | RegionOne                               |
    | region_id    | RegionOne                               |
    | service_id   | eb9fd245bdbc414695952e93f29fe3ac        |
    | service_name | cinderv2                                |
    | service_type | volumev2                                |
    | url          | http://controller:8776/v2/%(tenant_id)s |
    +--------------+-----------------------------------------+
    

    Note

    The Block Storage services requires endpoints for each service entity.

Install and configure components

  1. Install the packages:

    # apt-get install cinder-api cinder-scheduler python-cinderclient
    
  1. Edit the /etc/cinder/cinder.conf file and complete the following actions:

    • In the [database] section, configure database access:

      [database]
      ...
      connection = mysql+pymysql://cinder:CINDER_DBPASS@controller/cinder
      

      Replace CINDER_DBPASS with the password you chose for the Block Storage database.

    • In the [DEFAULT] and [oslo_messaging_rabbit] sections, configure RabbitMQ message queue access:

      [DEFAULT]
      ...
      rpc_backend = rabbit
      
      [oslo_messaging_rabbit]
      ...
      rabbit_host = controller
      rabbit_userid = openstack
      rabbit_password = RABBIT_PASS
      

      Replace RABBIT_PASS with the password you chose for the openstack account in RabbitMQ.

    • In the [DEFAULT] and [keystone_authtoken] sections, configure Identity service access:

      [DEFAULT]
      ...
      auth_strategy = keystone
      
      [keystone_authtoken]
      ...
      auth_uri = http://controller:5000
      auth_url = http://controller:35357
      auth_plugin = password
      project_domain_id = default
      user_domain_id = default
      project_name = service
      username = cinder
      password = CINDER_PASS
      

      Replace CINDER_PASS with the password you chose for the cinder user in the Identity service.

      Note

      Comment out or remove any other options in the [keystone_authtoken] section.

    • In the [DEFAULT] section, configure the my_ip option to use the management interface IP address of the controller node:

      [DEFAULT]
      ...
      my_ip = 10.0.0.11
      
    • In the [oslo_concurrency] section, configure the lock path:

      [oslo_concurrency]
      ...
      lock_path = /var/lib/cinder/tmp
      
    • (Optional) To assist with troubleshooting, enable verbose logging in the [DEFAULT] section:

      [DEFAULT]
      ...
      verbose = True
      
  2. Populate the Block Storage database:

    # su -s /bin/sh -c "cinder-manage db sync" cinder
    

Configure Compute to use Block Storage

  • Edit the /etc/nova/nova.conf file and add the following to it:

    [cinder]
    os_region_name = RegionOne
    

Finalize installation

  1. Restart the Compute API service:

    # service nova-api restart
    
  2. Restart the Block Storage services:

    # service cinder-scheduler restart
    # service cinder-api restart
    
  3. By default, the Ubuntu packages create an SQLite database.

    Because this configuration uses an SQL database server, you can remove the SQLite database file:

    # rm -f /var/lib/cinder/cinder.sqlite
    
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.