Ceilometer Configuration Options

Ceilometer Configuration Options

Ceilometer Sample Configuration File

Configure Ceilometer by editing /etc/ceilometer/ceilometer.conf.

No config file is provided with the source code, it will be created during the installation. In case where no configuration file was installed, one can be easily created by running:

oslo-config-generator \
    --config-file=/etc/ceilometer/ceilometer-config-generator.conf \
    --output-file=/etc/ceilometer/ceilometer.conf

The following is a sample Ceilometer configuration for adaptation and use. It is auto-generated from Ceilometer when this documentation is built, and can also be viewed in file form.

[DEFAULT]

#
# From ceilometer
#

# To reduce polling agent load, samples are sent to the notification agent in a
# batch. To gain higher throughput at the cost of load set this to False.
# (boolean value)
#batch_polled_samples = true

# Inspector to use for inspecting the hypervisor layer. Known inspectors are
# libvirt, hyperv, vsphere and xenapi. (string value)
#hypervisor_inspector = libvirt

# Libvirt domain type. (string value)
# Possible values:
# kvm - <No description provided>
# lxc - <No description provided>
# qemu - <No description provided>
# uml - <No description provided>
# xen - <No description provided>
#libvirt_type = kvm

# Override the default libvirt URI (which is dependent on libvirt_type).
# (string value)
#libvirt_uri =

# Swift reseller prefix. Must be on par with reseller_prefix in proxy-
# server.conf. (string value)
#reseller_prefix = AUTH_

# Configuration file for pipeline definition. (string value)
#pipeline_cfg_file = pipeline.yaml

# Configuration file for event pipeline definition. (string value)
#event_pipeline_cfg_file = event_pipeline.yaml

# Source for samples emitted on this instance. (string value)
#sample_source = openstack

# List of metadata prefixes reserved for metering use. (list value)
#reserved_metadata_namespace = metering.

# Limit on length of reserved metadata values. (integer value)
#reserved_metadata_length = 256

# List of metadata keys reserved for metering use. And these keys are
# additional to the ones included in the namespace. (list value)
#reserved_metadata_keys =

# Path to the rootwrap configuration file to use for running commands as root
# (string value)
#rootwrap_config = /etc/ceilometer/rootwrap.conf

# Name of this node, which must be valid in an AMQP key. Can be an opaque
# identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
# (unknown value)
#host = <your_hostname>

# Timeout seconds for HTTP requests. Set it to None to disable timeout.
# (integer value)
#http_timeout = 600

# Maximum number of parallel requests for services to handle at the same time.
# (integer value)
# Minimum value: 1
#max_parallel_requests = 64

#
# From oslo.log
#

# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false

# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, logging_context_format_string). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>

# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
#log_date_format = %Y-%m-%d %H:%M:%S

# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>

# (Optional) The base directory used for relative log_file  paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>

# Uses logging handler designed to watch file system. When log file is moved or
# removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and
# Linux platform is used. This option is ignored if log_config_append is set.
# (boolean value)
#watch_log_file = false

# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append
# is set. (boolean value)
#use_syslog = false

# Enable journald for logging. If running in a systemd environment you may wish
# to enable journal support. Doing so will use the journal native protocol
# which includes structured metadata in addition to log messages.This option is
# ignored if log_config_append is set. (boolean value)
#use_journal = false

# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER

# Use JSON formatting for logging. This option is ignored if log_config_append
# is set. (boolean value)
#use_json = false

# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
#use_stderr = false

# Format string to use for log messages with context. (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

# Format string to use for log messages when context is undefined. (string
# value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

# Additional data to append to log message when logging level for the message
# is DEBUG. (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

# Prefix each line of exception output with this format. (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. (string value)
#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO

# Enables or disables publication of error events. (boolean value)
#publish_errors = false

# The format for an instance that is passed with the log message. (string
# value)
#instance_format = "[instance: %(uuid)s] "

# The format for an instance UUID that is passed with the log message. (string
# value)
#instance_uuid_format = "[instance: %(uuid)s] "

# Interval, number of seconds, of log rate limiting. (integer value)
#rate_limit_interval = 0

# Maximum number of logged messages per rate_limit_interval. (integer value)
#rate_limit_burst = 0

# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
# or empty string. Logs with level greater or equal to rate_limit_except_level
# are not filtered. An empty string means that all levels are filtered. (string
# value)
#rate_limit_except_level = CRITICAL

# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false

#
# From oslo.messaging
#

# Size of RPC connection pool. (integer value)
#rpc_conn_pool_size = 30

# The pool size limit for connections expiration policy (integer value)
#conn_pool_min_size = 2

# The time-to-live in sec of idle connections in the pool (integer value)
#conn_pool_ttl = 1200

# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
# The "host" option should point or resolve to this address. (string value)
#rpc_zmq_bind_address = *

# MatchMaker driver. (string value)
# Possible values:
# redis - <No description provided>
# sentinel - <No description provided>
# dummy - <No description provided>
#rpc_zmq_matchmaker = redis

# Number of ZeroMQ contexts, defaults to 1. (integer value)
#rpc_zmq_contexts = 1

# Maximum number of ingress messages to locally buffer per topic. Default is
# unlimited. (integer value)
#rpc_zmq_topic_backlog = <None>

# Directory for holding IPC sockets. (string value)
#rpc_zmq_ipc_dir = /var/run/openstack

# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
# "host" option, if running Nova. (string value)
#rpc_zmq_host = localhost

# Number of seconds to wait before all pending messages will be sent after
# closing a socket. The default value of -1 specifies an infinite linger
# period. The value of 0 specifies no linger period. Pending messages shall be
# discarded immediately when the socket is closed. Positive values specify an
# upper bound for the linger period. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
#zmq_linger = -1

# The default number of seconds that poll should wait. Poll raises timeout
# exception when timeout expired. (integer value)
#rpc_poll_timeout = 1

# Expiration timeout in seconds of a name service record about existing target
# ( < 0 means no timeout). (integer value)
#zmq_target_expire = 300

# Update period in seconds of a name service record about existing target.
# (integer value)
#zmq_target_update = 180

# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
# value)
#use_pub_sub = false

# Use ROUTER remote proxy. (boolean value)
#use_router_proxy = false

# This option makes direct connections dynamic or static. It makes sense only
# with use_router_proxy=False which means to use direct connections for direct
# message types (ignored otherwise). (boolean value)
#use_dynamic_connections = false

# How many additional connections to a host will be made for failover reasons.
# This option is actual only in dynamic connections mode. (integer value)
#zmq_failover_connections = 2

# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
#rpc_zmq_min_port = 49153

# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
#rpc_zmq_max_port = 65536

# Number of retries to find free port number before fail with ZMQBindError.
# (integer value)
#rpc_zmq_bind_port_retries = 100

# Default serialization mechanism for serializing/deserializing
# outgoing/incoming messages (string value)
# Possible values:
# json - <No description provided>
# msgpack - <No description provided>
#rpc_zmq_serialization = json

# This option configures round-robin mode in zmq socket. True means not keeping
# a queue when server side disconnects. False means to keep queue and messages
# even if server is disconnected, when the server appears we send all
# accumulated messages to it. (boolean value)
#zmq_immediate = true

# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
# other negative value) means to skip any overrides and leave it to OS default;
# 0 and 1 (or any other positive value) mean to disable and enable the option
# respectively. (integer value)
#zmq_tcp_keepalive = -1

# The duration between two keepalive transmissions in idle condition. The unit
# is platform dependent, for example, seconds in Linux, milliseconds in Windows
# etc. The default value of -1 (or any other negative value and 0) means to
# skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_idle = -1

# The number of retransmissions to be carried out before declaring that remote
# end is not available. The default value of -1 (or any other negative value
# and 0) means to skip any overrides and leave it to OS default. (integer
# value)
#zmq_tcp_keepalive_cnt = -1

# The duration between two successive keepalive retransmissions, if
# acknowledgement to the previous keepalive transmission is not received. The
# unit is platform dependent, for example, seconds in Linux, milliseconds in
# Windows etc. The default value of -1 (or any other negative value and 0)
# means to skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_intvl = -1

# Maximum number of (green) threads to work concurrently. (integer value)
#rpc_thread_pool_size = 100

# Expiration timeout in seconds of a sent/received message after which it is
# not tracked anymore by a client/server. (integer value)
#rpc_message_ttl = 300

# Wait for message acknowledgements from receivers. This mechanism works only
# via proxy without PUB/SUB. (boolean value)
#rpc_use_acks = false

# Number of seconds to wait for an ack from a cast/call. After each retry
# attempt this timeout is multiplied by some specified multiplier. (integer
# value)
#rpc_ack_timeout_base = 15

# Number to multiply base ack timeout by after each retry attempt. (integer
# value)
#rpc_ack_timeout_multiplier = 2

# Default number of message sending attempts in case of any problems occurred:
# positive value N means at most N retries, 0 means no retries, None or -1 (or
# any other negative values) mean to retry forever. This option is used only if
# acknowledgments are enabled. (integer value)
#rpc_retry_attempts = 3

# List of publisher hosts SubConsumer can subscribe on. This option has higher
# priority then the default publishers list taken from the matchmaker. (list
# value)
#subscribe_on =

# Size of executor thread pool when executor is threading or eventlet. (integer
# value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64

# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60

# The network address and optional user credentials for connecting to the
# messaging backend, in URL format. The expected format is:
#
# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
#
# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
#
# For full details on the fields in the URL see the documentation of
# oslo_messaging.TransportURL at
# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
# (string value)
#transport_url = <None>

# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
# include amqp and zmq. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rpc_backend = rabbit

# The default exchange under which topics are scoped. May be overridden by an
# exchange name specified in the transport_url option. (string value)
#control_exchange = openstack

#
# From oslo.service.service
#

# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
# <start>:<end>, where 0 results in listening on a random tcp port number;
# <port> results in listening on the specified port number (and not enabling
# backdoor if that port is in use); and <start>:<end> results in listening on
# the smallest unused port number within the specified range of port numbers.
# The chosen port is displayed in the service's log file. (string value)
#backdoor_port = <None>

# Enable eventlet backdoor, using the provided path as a unix socket that can
# receive connections. This option is mutually exclusive with 'backdoor_port'
# in that only one should be provided. If both are provided then the existence
# of this option overrides the usage of that option. (string value)
#backdoor_socket = <None>

# Enables or disables logging values of all registered options when starting a
# service (at DEBUG level). (boolean value)
#log_options = true

# Specify a timeout after which a gracefully shutdown server will exit. Zero
# value means endless wait. (integer value)
#graceful_shutdown_timeout = 60


[compute]

#
# From ceilometer
#

# Ceilometer offers many methods to discover the instance running on a compute
# node:
# * naive: poll nova to get all instances
# * workload_partitioning: poll nova to get instances of the compute
# * libvirt_metadata: get instances from libvirt metadata   but without
# instance metadata (recommended for Gnocchi   backend (string value)
# Possible values:
# naive - <No description provided>
# workload_partitioning - <No description provided>
# libvirt_metadata - <No description provided>
#instance_discovery_method = libvirt_metadata

# New instances will be discovered periodically based on this option (in
# seconds). By default, the agent discovers instances according to pipeline
# polling interval. If option is greater than 0, the instance list to poll will
# be updated based on this option's interval. Measurements relating to the
# instances will match intervals defined in pipeline. This option is only used
# for agent polling to Nova API, so it will work only when
# 'instance_discovery_method' is set to 'naive'. (integer value)
# Minimum value: 0
#resource_update_interval = 0

# The expiry to totally refresh the instances resource cache, since the
# instance may be migrated to another host, we need to clean the legacy
# instances info in local cache by totally refreshing the local cache. The
# minimum should be the value of the config option of resource_update_interval.
# This option is only used for agent polling to Nova API, so it will work only
# when 'instance_discovery_method' is set to 'naive'. (integer value)
# Minimum value: 0
#resource_cache_expiry = 3600


[coordination]

#
# From ceilometer
#

# The backend URL to use for distributed coordination. If left empty, per-
# deployment central agent and per-host compute agent won't do workload
# partitioning and will only function correctly if a single instance of that
# service is running. (string value)
#backend_url = <None>

# Number of seconds between checks to see if group membership has changed
# (floating point value)
#check_watchers = 10.0


[dispatcher_gnocchi]

#
# From ceilometer
#

# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
# service activity (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#filter_project = gnocchi

# DEPRECATED: The archive policy to use when the dispatcher create a new
# metric. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#archive_policy = <None>

# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
# resources/metrics (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#resources_definition_file = gnocchi_resources.yaml

# DEPRECATED: Number of seconds before request to gnocchi times out (floating
# point value)
# Minimum value: 0
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#request_timeout = 6.05


[event]

#
# From ceilometer
#

# Configuration file for event definitions. (string value)
#definitions_cfg_file = event_definitions.yaml

# Drop notifications if no event definition matches. (Otherwise, we convert
# them with just the default traits) (boolean value)
#drop_unmatched_notifications = false

# Store the raw notification for select priority levels (info and/or error). By
# default, raw details are not captured. (multi valued)
#store_raw =


[hardware]

#
# From ceilometer
#

# URL scheme to use for hardware nodes. (string value)
#url_scheme = snmp://

# SNMPd user name of all nodes running in the cloud. (string value)
#readonly_user_name = ro_snmp_user

# SNMPd v3 authentication password of all the nodes running in the cloud.
# (string value)
#readonly_user_password = password

# SNMPd v3 authentication algorithm of all the nodes running in the cloud
# (string value)
# Possible values:
# md5 - <No description provided>
# sha - <No description provided>
#readonly_user_auth_proto = <None>

# SNMPd v3 encryption algorithm of all the nodes running in the cloud (string
# value)
# Possible values:
# des - <No description provided>
# aes128 - <No description provided>
# 3des - <No description provided>
# aes192 - <No description provided>
# aes256 - <No description provided>
#readonly_user_priv_proto = <None>

# SNMPd v3 encryption password of all the nodes running in the cloud. (string
# value)
#readonly_user_priv_password = <None>

# Name of the control plane Tripleo network (string value)
#tripleo_network_name = ctlplane

# Configuration file for defining hardware snmp meters. (string value)
#meter_definitions_file = snmp.yaml


[ipmi]

#
# From ceilometer
#

# Number of retries upon Intel Node Manager initialization failure (integer
# value)
#node_manager_init_retry = 3

# Tolerance of IPMI/NM polling failures before disable this pollster. Negative
# indicates retrying forever. (integer value)
#polling_retry = 3


[matchmaker_redis]

#
# From oslo.messaging
#

# DEPRECATED: Host to locate redis. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#host = 127.0.0.1

# DEPRECATED: Use this port to connect to redis host. (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#port = 6379

# DEPRECATED: Password for Redis server (optional). (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#password =

# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
# [host:port, host1:port ... ] (list value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#sentinel_hosts =

# Redis replica set name. (string value)
#sentinel_group_name = oslo-messaging-zeromq

# Time in ms to wait between connection attempts. (integer value)
#wait_timeout = 2000

# Time in ms to wait before the transaction is killed. (integer value)
#check_timeout = 20000

# Timeout in ms on blocking socket operations. (integer value)
#socket_timeout = 10000


[meter]

#
# From ceilometer
#

# DEPRECATED: Configuration file for defining meter notifications. This option
# is deprecated and use meter_definitions_dirs to configure meter notification
# file. Meter definitions configuration file will be sought according to the
# parameter. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#meter_definitions_cfg_file = <None>

# List directory to find files of defining meter notifications. (multi valued)
#meter_definitions_dirs = /etc/ceilometer/meters.d
#meter_definitions_dirs = /home/zuul/src/opendev.org/openstack/ceilometer/ceilometer/data/meters.d


[notification]

#
# From ceilometer
#

# Number of queues to parallelize workload across. This value should be larger
# than the number of active notification agents for optimal results. WARNING:
# Once set, lowering this value may result in lost data. (integer value)
# Minimum value: 1
#pipeline_processing_queues = 10

# Acknowledge message when event persistence fails. (boolean value)
#ack_on_event_error = true

# Enable workload partitioning, allowing multiple notification agents to be run
# simultaneously. (boolean value)
#workload_partitioning = false

# Messaging URLs to listen for notifications. Example:
# rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
# (DEFAULT/transport_url is used if empty). This is useful when you have
# dedicate messaging nodes for each service, for example, all nova
# notifications go to rabbit-nova:5672, while all cinder notifications go to
# rabbit-cinder:5672. (multi valued)
#messaging_urls =

# Number of notification messages to wait before publishing them. Batching is
# advised when transformations are applied in pipeline. (integer value)
# Minimum value: 1
#batch_size = 100

# Number of seconds to wait before publishing samples when batch_size is not
# reached (None means indefinitely) (integer value)
#batch_timeout = 5

# Number of workers for notification service, default value is 1. (integer
# value)
# Minimum value: 1
# Deprecated group/name - [DEFAULT]/notification_workers
#workers = 1

# Select which pipeline managers to enable to  generate data (multi valued)
#pipelines = meter
#pipelines = event

# Exchanges name to listen for notifications. (multi valued)
# Deprecated group/name - [DEFAULT]/http_control_exchanges
#notification_control_exchanges = nova
#notification_control_exchanges = glance
#notification_control_exchanges = neutron
#notification_control_exchanges = cinder
#notification_control_exchanges = heat
#notification_control_exchanges = keystone
#notification_control_exchanges = sahara
#notification_control_exchanges = trove
#notification_control_exchanges = zaqar
#notification_control_exchanges = swift
#notification_control_exchanges = ceilometer
#notification_control_exchanges = magnum
#notification_control_exchanges = dns
#notification_control_exchanges = ironic
#notification_control_exchanges = aodh


[oslo_concurrency]

#
# From oslo.concurrency
#

# Enables or disables inter-process locks. (boolean value)
#disable_process_locking = false

# Directory to use for lock files.  For security, the specified directory
# should only be writable by the user running the processes that need locking.
# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
# a lock path must be set. (string value)
#lock_path = <None>


[oslo_messaging_amqp]

#
# From oslo.messaging
#

# Name for the AMQP container. must be globally unique. Defaults to a generated
# UUID (string value)
#container_name = <None>

# Timeout for inactive connections (in seconds) (integer value)
#idle_timeout = 0

# Debug: dump AMQP frames to stdout (boolean value)
#trace = false

# Attempt to connect via SSL. If no other ssl-related parameters are given, it
# will use the system's CA-bundle to verify the server's certificate. (boolean
# value)
#ssl = false

# CA certificate PEM file used to verify the server's certificate (string
# value)
#ssl_ca_file =

# Self-identifying certificate PEM file for client authentication (string
# value)
#ssl_cert_file =

# Private key PEM file used to sign ssl_cert_file certificate (optional)
# (string value)
#ssl_key_file =

# Password for decrypting ssl_key_file (if encrypted) (string value)
#ssl_key_password = <None>

# By default SSL checks that the name in the server's certificate matches the
# hostname in the transport_url. In some configurations it may be preferable to
# use the virtual hostname instead, for example if the server uses the Server
# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
# virtual host name instead of the DNS name. (boolean value)
#ssl_verify_vhost = false

# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Not applicable - not a SSL server
#allow_insecure_clients = false

# Space separated list of acceptable SASL mechanisms (string value)
#sasl_mechanisms =

# Path to directory that contains the SASL configuration (string value)
#sasl_config_dir =

# Name of configuration file (without .conf suffix) (string value)
#sasl_config_name =

# SASL realm to use if no realm present in username (string value)
#sasl_default_realm =

# DEPRECATED: User name for message broker authentication (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Should use configuration option transport_url to provide the
# username.
#username =

# DEPRECATED: Password for message broker authentication (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Should use configuration option transport_url to provide the
# password.
#password =

# Seconds to pause before attempting to re-connect. (integer value)
# Minimum value: 1
#connection_retry_interval = 1

# Increase the connection_retry_interval by this many seconds after each
# unsuccessful failover attempt. (integer value)
# Minimum value: 0
#connection_retry_backoff = 2

# Maximum limit for connection_retry_interval + connection_retry_backoff
# (integer value)
# Minimum value: 1
#connection_retry_interval_max = 30

# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
# recoverable error. (integer value)
# Minimum value: 1
#link_retry_delay = 10

# The maximum number of attempts to re-send a reply message which failed due to
# a recoverable error. (integer value)
# Minimum value: -1
#default_reply_retry = 0

# The deadline for an rpc reply message delivery. (integer value)
# Minimum value: 5
#default_reply_timeout = 30

# The deadline for an rpc cast or call message delivery. Only used when caller
# does not provide a timeout expiry. (integer value)
# Minimum value: 5
#default_send_timeout = 30

# The deadline for a sent notification message delivery. Only used when caller
# does not provide a timeout expiry. (integer value)
# Minimum value: 5
#default_notify_timeout = 30

# The duration to schedule a purge of idle sender links. Detach link after
# expiry. (integer value)
# Minimum value: 1
#default_sender_link_timeout = 600

# Indicates the addressing mode used by the driver.
# Permitted values:
# 'legacy'   - use legacy non-routable addressing
# 'routable' - use routable addresses
# 'dynamic'  - use legacy addresses if the message bus does not support routing
# otherwise use routable addressing (string value)
#addressing_mode = dynamic

# Enable virtual host support for those message buses that do not natively
# support virtual hosting (such as qpidd). When set to true the virtual host
# name will be added to all message bus addresses, effectively creating a
# private 'subnet' per virtual host. Set to False if the message bus supports
# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
# as the name of the virtual host. (boolean value)
#pseudo_vhost = true

# address prefix used when sending to a specific server (string value)
#server_request_prefix = exclusive

# address prefix used when broadcasting to all servers (string value)
#broadcast_prefix = broadcast

# address prefix when sending to any server in group (string value)
#group_request_prefix = unicast

# Address prefix for all generated RPC addresses (string value)
#rpc_address_prefix = openstack.org/om/rpc

# Address prefix for all generated Notification addresses (string value)
#notify_address_prefix = openstack.org/om/notify

# Appended to the address prefix when sending a fanout message. Used by the
# message bus to identify fanout messages. (string value)
#multicast_address = multicast

# Appended to the address prefix when sending to a particular RPC/Notification
# server. Used by the message bus to identify messages sent to a single
# destination. (string value)
#unicast_address = unicast

# Appended to the address prefix when sending to a group of consumers. Used by
# the message bus to identify messages that should be delivered in a round-
# robin fashion across consumers. (string value)
#anycast_address = anycast

# Exchange name used in notification addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_notification_exchange if set
# else control_exchange if set
# else 'notify' (string value)
#default_notification_exchange = <None>

# Exchange name used in RPC addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_rpc_exchange if set
# else control_exchange if set
# else 'rpc' (string value)
#default_rpc_exchange = <None>

# Window size for incoming RPC Reply messages. (integer value)
# Minimum value: 1
#reply_link_credit = 200

# Window size for incoming RPC Request messages (integer value)
# Minimum value: 1
#rpc_server_credit = 100

# Window size for incoming Notification messages (integer value)
# Minimum value: 1
#notify_server_credit = 100

# Send messages of this type pre-settled.
# Pre-settled messages will not receive acknowledgement
# from the peer. Note well: pre-settled messages may be
# silently discarded if the delivery fails.
# Permitted values:
# 'rpc-call' - send RPC Calls pre-settled
# 'rpc-reply'- send RPC Replies pre-settled
# 'rpc-cast' - Send RPC Casts pre-settled
# 'notify'   - Send Notifications pre-settled
#  (multi valued)
#pre_settled = rpc-cast
#pre_settled = rpc-reply


[oslo_messaging_kafka]

#
# From oslo.messaging
#

# DEPRECATED: Default Kafka broker Host (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#kafka_default_host = localhost

# DEPRECATED: Default Kafka broker Port (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#kafka_default_port = 9092

# Max fetch bytes of Kafka consumer (integer value)
#kafka_max_fetch_bytes = 1048576

# Default timeout(s) for Kafka consumers (floating point value)
#kafka_consumer_timeout = 1.0

# DEPRECATED: Pool Size for Kafka Consumers (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#pool_size = 10

# DEPRECATED: The pool size limit for connections expiration policy (integer
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#conn_pool_min_size = 2

# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#conn_pool_ttl = 1200

# Group id for Kafka consumer. Consumers in one group will coordinate message
# consumption (string value)
#consumer_group = oslo_messaging_consumer

# Upper bound on the delay for KafkaProducer batching in seconds (floating
# point value)
#producer_batch_timeout = 0.0

# Size of batch for the producer async send (integer value)
#producer_batch_size = 16384


[oslo_messaging_notifications]

#
# From oslo.messaging
#

# The Drivers(s) to handle sending notifications. Possible values are
# messaging, messagingv2, routing, log, test, noop (multi valued)
# Deprecated group/name - [DEFAULT]/notification_driver
#driver =

# A URL representing the messaging driver to use for notifications. If not set,
# we fall back to the same configuration used for RPC. (string value)
# Deprecated group/name - [DEFAULT]/notification_transport_url
#transport_url = <None>

# AMQP topic used for OpenStack notifications. (list value)
# Deprecated group/name - [rpc_notifier2]/topics
# Deprecated group/name - [DEFAULT]/notification_topics
#topics = notifications

# The maximum number of attempts to re-send a notification message which failed
# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
# (integer value)
#retry = -1


[oslo_messaging_rabbit]

#
# From oslo.messaging
#

# Use durable queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_durable_queues
# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
#amqp_durable_queues = false

# Auto-delete queues in AMQP. (boolean value)
#amqp_auto_delete = false

# Enable SSL (boolean value)
#ssl = <None>

# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
#ssl_version =

# SSL key file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
#ssl_key_file =

# SSL cert file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
#ssl_cert_file =

# SSL certification authority file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
#ssl_ca_file =

# How long to wait before reconnecting in response to an AMQP consumer cancel
# notification. (floating point value)
#kombu_reconnect_delay = 1.0

# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
# be used. This option may not be available in future versions. (string value)
#kombu_compression = <None>

# How long to wait a missing client before abandoning to send it its replies.
# This value should not be longer than rpc_response_timeout. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60

# Determines how the next RabbitMQ node is chosen in case the one we are
# currently connected to becomes unavailable. Takes effect only if more than
# one RabbitMQ node is provided in config. (string value)
# Possible values:
# round-robin - <No description provided>
# shuffle - <No description provided>
#kombu_failover_strategy = round-robin

# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_host = localhost

# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
# value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_port = 5672

# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_hosts = $rabbit_host:$rabbit_port

# DEPRECATED: The RabbitMQ userid. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_userid = guest

# DEPRECATED: The RabbitMQ password. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_password = guest

# The RabbitMQ login method. (string value)
# Possible values:
# PLAIN - <No description provided>
# AMQPLAIN - <No description provided>
# RABBIT-CR-DEMO - <No description provided>
#rabbit_login_method = AMQPLAIN

# DEPRECATED: The RabbitMQ virtual host. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_virtual_host = /

# How frequently to retry connecting with RabbitMQ. (integer value)
#rabbit_retry_interval = 1

# How long to backoff for between retries when connecting to RabbitMQ. (integer
# value)
#rabbit_retry_backoff = 2

# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
# (integer value)
#rabbit_interval_max = 30

# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
# (infinite retry count). (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#rabbit_max_retries = 0

# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
# is no longer controlled by the x-ha-policy argument when declaring a queue.
# If you just want to make sure that all queues (except those with auto-
# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
#rabbit_ha_queues = false

# Positive integer representing duration in seconds for queue TTL (x-expires).
# Queues which are unused for the duration of the TTL are automatically
# deleted. The parameter affects only reply and fanout queues. (integer value)
# Minimum value: 1
#rabbit_transient_queues_ttl = 1800

# Specifies the number of messages to prefetch. Setting to zero allows
# unlimited messages. (integer value)
#rabbit_qos_prefetch_count = 0

# Number of seconds after which the Rabbit broker is considered down if
# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
# value)
#heartbeat_timeout_threshold = 60

# How often times during the heartbeat_timeout_threshold we check the
# heartbeat. (integer value)
#heartbeat_rate = 2

# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
#fake_rabbit = false

# Maximum number of channels to allow (integer value)
#channel_max = <None>

# The maximum byte size for an AMQP frame (integer value)
#frame_max = <None>

# How often to send heartbeats for consumer's connections (integer value)
#heartbeat_interval = 3

# Arguments passed to ssl.wrap_socket (dict value)
#ssl_options = <None>

# Set socket timeout in seconds for connection's socket (floating point value)
#socket_timeout = 0.25

# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
# value)
#tcp_user_timeout = 0.25

# Set delay for reconnection to some host which has connection error (floating
# point value)
#host_connection_reconnect_delay = 0.25

# Connection factory implementation (string value)
# Possible values:
# new - <No description provided>
# single - <No description provided>
# read_write - <No description provided>
#connection_factory = single

# Maximum number of connections to keep queued. (integer value)
#pool_max_size = 30

# Maximum number of connections to create above `pool_max_size`. (integer
# value)
#pool_max_overflow = 0

# Default number of seconds to wait for a connections to available (integer
# value)
#pool_timeout = 30

# Lifetime of a connection (since creation) in seconds or None for no
# recycling. Expired connections are closed on acquire. (integer value)
#pool_recycle = 600

# Threshold at which inactive (since release) connections are considered stale
# in seconds or None for no staleness. Stale connections are closed on acquire.
# (integer value)
#pool_stale = 60

# Default serialization mechanism for serializing/deserializing
# outgoing/incoming messages (string value)
# Possible values:
# json - <No description provided>
# msgpack - <No description provided>
#default_serializer_type = json

# Persist notification messages. (boolean value)
#notification_persistence = false

# Exchange name for sending notifications (string value)
#default_notification_exchange = ${control_exchange}_notification

# Max number of not acknowledged message which RabbitMQ can send to
# notification listener. (integer value)
#notification_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending
# notification, -1 means infinite retry. (integer value)
#default_notification_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending
# notification message (floating point value)
#notification_retry_delay = 0.25

# Time to live for rpc queues without consumers in seconds. (integer value)
#rpc_queue_expiration = 60

# Exchange name for sending RPC messages (string value)
#default_rpc_exchange = ${control_exchange}_rpc

# Exchange name for receiving RPC replies (string value)
#rpc_reply_exchange = ${control_exchange}_rpc_reply

# Max number of not acknowledged message which RabbitMQ can send to rpc
# listener. (integer value)
#rpc_listener_prefetch_count = 100

# Max number of not acknowledged message which RabbitMQ can send to rpc reply
# listener. (integer value)
#rpc_reply_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending
# reply. -1 means infinite retry during rpc_timeout (integer value)
#rpc_reply_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending
# reply. (floating point value)
#rpc_reply_retry_delay = 0.25

# Reconnecting retry count in case of connectivity problem during sending RPC
# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
# request could be processed more than one time (integer value)
#default_rpc_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending RPC
# message (floating point value)
#rpc_retry_delay = 0.25


[oslo_messaging_zmq]

#
# From oslo.messaging
#

# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
# The "host" option should point or resolve to this address. (string value)
#rpc_zmq_bind_address = *

# MatchMaker driver. (string value)
# Possible values:
# redis - <No description provided>
# sentinel - <No description provided>
# dummy - <No description provided>
#rpc_zmq_matchmaker = redis

# Number of ZeroMQ contexts, defaults to 1. (integer value)
#rpc_zmq_contexts = 1

# Maximum number of ingress messages to locally buffer per topic. Default is
# unlimited. (integer value)
#rpc_zmq_topic_backlog = <None>

# Directory for holding IPC sockets. (string value)
#rpc_zmq_ipc_dir = /var/run/openstack

# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
# "host" option, if running Nova. (string value)
#rpc_zmq_host = localhost

# Number of seconds to wait before all pending messages will be sent after
# closing a socket. The default value of -1 specifies an infinite linger
# period. The value of 0 specifies no linger period. Pending messages shall be
# discarded immediately when the socket is closed. Positive values specify an
# upper bound for the linger period. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
#zmq_linger = -1

# The default number of seconds that poll should wait. Poll raises timeout
# exception when timeout expired. (integer value)
#rpc_poll_timeout = 1

# Expiration timeout in seconds of a name service record about existing target
# ( < 0 means no timeout). (integer value)
#zmq_target_expire = 300

# Update period in seconds of a name service record about existing target.
# (integer value)
#zmq_target_update = 180

# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
# value)
#use_pub_sub = false

# Use ROUTER remote proxy. (boolean value)
#use_router_proxy = false

# This option makes direct connections dynamic or static. It makes sense only
# with use_router_proxy=False which means to use direct connections for direct
# message types (ignored otherwise). (boolean value)
#use_dynamic_connections = false

# How many additional connections to a host will be made for failover reasons.
# This option is actual only in dynamic connections mode. (integer value)
#zmq_failover_connections = 2

# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
#rpc_zmq_min_port = 49153

# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
#rpc_zmq_max_port = 65536

# Number of retries to find free port number before fail with ZMQBindError.
# (integer value)
#rpc_zmq_bind_port_retries = 100

# Default serialization mechanism for serializing/deserializing
# outgoing/incoming messages (string value)
# Possible values:
# json - <No description provided>
# msgpack - <No description provided>
#rpc_zmq_serialization = json

# This option configures round-robin mode in zmq socket. True means not keeping
# a queue when server side disconnects. False means to keep queue and messages
# even if server is disconnected, when the server appears we send all
# accumulated messages to it. (boolean value)
#zmq_immediate = true

# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
# other negative value) means to skip any overrides and leave it to OS default;
# 0 and 1 (or any other positive value) mean to disable and enable the option
# respectively. (integer value)
#zmq_tcp_keepalive = -1

# The duration between two keepalive transmissions in idle condition. The unit
# is platform dependent, for example, seconds in Linux, milliseconds in Windows
# etc. The default value of -1 (or any other negative value and 0) means to
# skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_idle = -1

# The number of retransmissions to be carried out before declaring that remote
# end is not available. The default value of -1 (or any other negative value
# and 0) means to skip any overrides and leave it to OS default. (integer
# value)
#zmq_tcp_keepalive_cnt = -1

# The duration between two successive keepalive retransmissions, if
# acknowledgement to the previous keepalive transmission is not received. The
# unit is platform dependent, for example, seconds in Linux, milliseconds in
# Windows etc. The default value of -1 (or any other negative value and 0)
# means to skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_intvl = -1

# Maximum number of (green) threads to work concurrently. (integer value)
#rpc_thread_pool_size = 100

# Expiration timeout in seconds of a sent/received message after which it is
# not tracked anymore by a client/server. (integer value)
#rpc_message_ttl = 300

# Wait for message acknowledgements from receivers. This mechanism works only
# via proxy without PUB/SUB. (boolean value)
#rpc_use_acks = false

# Number of seconds to wait for an ack from a cast/call. After each retry
# attempt this timeout is multiplied by some specified multiplier. (integer
# value)
#rpc_ack_timeout_base = 15

# Number to multiply base ack timeout by after each retry attempt. (integer
# value)
#rpc_ack_timeout_multiplier = 2

# Default number of message sending attempts in case of any problems occurred:
# positive value N means at most N retries, 0 means no retries, None or -1 (or
# any other negative values) mean to retry forever. This option is used only if
# acknowledgments are enabled. (integer value)
#rpc_retry_attempts = 3

# List of publisher hosts SubConsumer can subscribe on. This option has higher
# priority then the default publishers list taken from the matchmaker. (list
# value)
#subscribe_on =


[polling]

#
# From ceilometer
#

# Configuration file for polling definition. (string value)
#cfg_file = polling.yaml

# Work-load partitioning group prefix. Use only if you want to run multiple
# polling agents with different config files. For each sub-group of the agent
# pool with the same partitioning_group_prefix a disjoint subset of pollsters
# should be loaded. (string value)
#partitioning_group_prefix = <None>


[publisher]

#
# From ceilometer
#

# Secret value for signing messages. Set value empty if signing is not required
# to avoid computational overhead. (string value)
# Deprecated group/name - [DEFAULT]/metering_secret
# Deprecated group/name - [publisher_rpc]/metering_secret
# Deprecated group/name - [publisher]/metering_secret
#telemetry_secret = change this for valid signing


[publisher_notifier]

#
# From ceilometer
#

# The topic that ceilometer uses for metering notifications. (string value)
#metering_topic = metering

# The topic that ceilometer uses for event notifications. (string value)
#event_topic = event

# The driver that ceilometer uses for metering notifications. (string value)
# Deprecated group/name - [publisher_notifier]/metering_driver
#telemetry_driver = messagingv2


[rgw_admin_credentials]

#
# From ceilometer
#

# Access key for Radosgw Admin. (string value)
#access_key = <None>

# Secret key for Radosgw Admin. (string value)
#secret_key = <None>


[service_credentials]

#
# From ceilometer-auth
#

# Authentication type to load (string value)
# Deprecated group/name - [service_credentials]/auth_plugin
#auth_type = <None>

# Config Section from which to load plugin specific options (string value)
#auth_section = <None>

# Authentication URL (string value)
#auth_url = <None>

# Scope for system operations (string value)
#system_scope = <None>

# Domain ID to scope to (string value)
#domain_id = <None>

# Domain name to scope to (string value)
#domain_name = <None>

# Project ID to scope to (string value)
# Deprecated group/name - [service_credentials]/tenant_id
#project_id = <None>

# Project name to scope to (string value)
# Deprecated group/name - [service_credentials]/tenant_name
#project_name = <None>

# Domain ID containing project (string value)
#project_domain_id = <None>

# Domain name containing project (string value)
#project_domain_name = <None>

# Trust ID (string value)
#trust_id = <None>

# Optional domain ID to use with v3 and v2 parameters. It will be used for both
# the user and project domain in v3 and ignored in v2 authentication. (string
# value)
#default_domain_id = <None>

# Optional domain name to use with v3 API and v2 parameters. It will be used
# for both the user and project domain in v3 and ignored in v2 authentication.
# (string value)
#default_domain_name = <None>

# User id (string value)
#user_id = <None>

# Username (string value)
# Deprecated group/name - [service_credentials]/user_name
#username = <None>

# User's domain id (string value)
#user_domain_id = <None>

# User's domain name (string value)
#user_domain_name = <None>

# User's password (string value)
#password = <None>

# Region name to use for OpenStack service endpoints. (string value)
# Deprecated group/name - [DEFAULT]/os_region_name
#region_name = <None>

# Type of endpoint in Identity service catalog to use for communication with
# OpenStack services. (string value)
# Possible values:
# public - <No description provided>
# internal - <No description provided>
# admin - <No description provided>
# auth - <No description provided>
# publicURL - <No description provided>
# internalURL - <No description provided>
# adminURL - <No description provided>
# Deprecated group/name - [service_credentials]/os_endpoint_type
#interface = public


[service_types]

#
# From ceilometer
#

# Glance service type. (string value)
#glance = image

# Neutron service type. (string value)
#neutron = network

# Neutron load balancer version. (string value)
# Possible values:
# v1 - <No description provided>
# v2 - <No description provided>
#neutron_lbaas_version = v2

# Nova service type. (string value)
#nova = compute

# Radosgw service type. (string value)
#radosgw = <None>

# Swift service type. (string value)
#swift = object-store

# Cinder service type. (string value)
# Deprecated group/name - [service_types]/cinderv2
#cinder = volumev3


[vmware]

#
# From ceilometer
#

# IP address of the VMware vSphere host. (unknown value)
#host_ip = 127.0.0.1

# Port of the VMware vSphere host. (port value)
# Minimum value: 0
# Maximum value: 65535
#host_port = 443

# Username of VMware vSphere. (string value)
#host_username =

# Password of VMware vSphere. (string value)
#host_password =

# CA bundle file to use in verifying the vCenter server certificate. (string
# value)
#ca_file = <None>

# If true, the vCenter server certificate is not verified. If false, then the
# default CA truststore is used for verification. This option is ignored if
# "ca_file" is set. (boolean value)
#insecure = false

# Number of times a VMware vSphere API may be retried. (integer value)
#api_retry_count = 10

# Sleep time in seconds for polling an ongoing async task. (floating point
# value)
#task_poll_interval = 0.5

# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
# Optional over-ride to default location for bug work-arounds. (string value)
#wsdl_location = <None>


[xenapi]

#
# From ceilometer
#

# URL for connection to XenServer/Xen Cloud Platform. (string value)
#connection_url = <None>

# Username for connection to XenServer/Xen Cloud Platform. (string value)
#connection_username = root

# Password for connection to XenServer/Xen Cloud Platform. (string value)
#connection_password = <None>
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.