Back up and restore volumes and snapshots¶
openstack command-line interface provides the tools for creating a
volume backup. You can restore a volume from a backup as long as the
backup’s associated database information (or backup metadata) is intact
in the Block Storage database.
Run this command to create a backup of a volume:
$ openstack volume backup create [--incremental] [--force] VOLUME
VOLUME is the name or ID of the volume,
a flag that indicates whether an incremental backup should be performed,
force is a flag that allows or disallows backup of a volume
when the volume is attached to an instance.
incremental flag, a full backup is created by default.
incremental flag, an incremental backup is created.
force flag, the volume will be backed up only if its
available. With the
force flag, the volume will be
backed up whether its status is
in-use. A volume
in-use when it is attached to an instance. The backup of an
in-use volume means your data is crash consistent. The
flag is False by default.
force flag is new in OpenStack Liberty.
The incremental backup is based on a parent backup which is an existing backup with the latest timestamp. The parent backup can be a full backup or an incremental backup depending on the timestamp.
The first backup of a volume has to be a full backup. Attempting to do
an incremental backup without any existing backups will fail.
There is an
is_incremental flag that indicates whether a backup is
incremental when showing details on the backup.
has_dependent_backups, returned when showing backup
details, will indicate whether the backup has dependent backups.
If it is
true, attempting to delete this backup will fail.
A new configure option
backup_swift_block_size is introduced into
cinder.conf for the default Swift backup driver. This is the size in
bytes that changes are tracked for incremental backups. The existing
backup_swift_object_size option, the size in bytes of Swift backup
objects, has to be a multiple of
backup_swift_block_size. The default
is 32768 for
backup_swift_block_size, and the default is 52428800 for
The configuration option
cinder.conf is used when backing up the volume to Object Storage
back end. This option enables or disables the timer. It is enabled by default
to send the periodic progress notifications to the Telemetry service.
This command also returns a backup ID. Use this backup ID when restoring the volume:
$ openstack volume backup restore BACKUP_ID VOLUME_ID
When restoring from a full backup, it is a full restore.
When restoring from an incremental backup, a list of backups is built based on the IDs of the parent backups. A full restore is performed based on the full backup first, then restore is done based on the incremental backup, laying on top of it in order.
You can view a backup list with the openstack volume backup list
command. Optional arguments to clarify the status of your backups
--volume to filter through backups by the specified name,
status, or volume-id. Search with
--all-projects for details of the
projects associated with the listed backups.
Because volume backups are dependent on the Block Storage database, you must also back up your Block Storage database regularly to ensure data recovery.
Alternatively, you can export and save the metadata of selected volume backups. Doing so precludes the need to back up the entire Block Storage database. This is useful if you need only a small subset of volumes to survive a catastrophic database failure.
If you specify a UUID encryption key when setting up the volume specifications, the backup metadata ensures that the key will remain valid when you back up and restore the volume.
For more information about how to export and import volume backup metadata, see the section called Export and import backup metadata.
By default, the swift object store is used for the backup repository.
If instead you want to use an NFS export as the backup repository, add the
following configuration options to the
[DEFAULT] section of the
cinder.conf file and restart the Block Storage services:
backup_driver = cinder.backup.drivers.nfs backup_share = HOST:EXPORT_PATH
backup_share option, replace
HOST with the DNS resolvable
host name or the IP address of the storage server for the NFS share, and
EXPORT_PATH with the path to that share. If your environment requires
that non-default mount options be specified for the share, set these as
backup_mount_options = MOUNT_OPTIONS
MOUNT_OPTIONS is a comma-separated string of NFS mount options as detailed
in the NFS man page.
There are several other options whose default values may be overridden as appropriate for your environment:
backup_compression_algorithm = zlib backup_sha_block_size_bytes = 32768 backup_file_size = 1999994880
backup_compression_algorithm can be set to
none. The value
none can be a useful setting when the
server providing the share for the backup repository itself performs
deduplication or compression on the backup data.
backup_file_size must be a multiple of
backup_sha_block_size_bytes. It is effectively the maximum file size to be
used, given your environment, to hold backup data. Volumes larger than this
will be stored in multiple files in the backup repository. The
backup_sha_block_size_bytes option determines the size of blocks from the
cinder volume being backed up on which digital signatures are calculated in
order to enable incremental backup capability.
You also have the option of resetting the state of a backup. When creating or restoring a backup, sometimes it may get stuck in the creating or restoring states due to problems like the database or rabbitmq being down. In situations like these resetting the state of the backup can restore it to a functional status.
Run this command to restore the state of a backup:
$ cinder backup-reset-state [--state STATE] BACKUP_ID-1 BACKUP_ID-2 ...
Run this command to create a backup of a snapshot:
$ openstack volume backup create [--incremental] [--force] \ [--snapshot SNAPSHOT_ID] VOLUME
VOLUME is the name or ID of the volume,
SNAPSHOT_ID is the ID of
the volume’s snapshot.
Since Liberty it is possible to cancel an ongoing backup operation on any of the Chunked Backup type of drivers such as Swift, NFS, Google, GlusterFS, and Posix.
To issue a backup cancellation on a backup we must request a force delete on the backup.
$ openstack volume backup delete --force BACKUP_ID
The policy on force delete defaults to admin only.
Even if the backup is immediately deleted, and therefore no longer appears in the listings, the cancellation may take a little bit longer, so please check the status of the source resource to see when it stops being “backing-up”.
Before Pike the “backing-up” status would always be stored in the volume, even when backing up a snapshot, so when backing up a snapshot any delete operation on the snapshot that followed a cancellation could result in an error if the snapshot was still mapped. Polling on the volume to stop being “backing-up” prior to the deletion is required to ensure success.
Since Rocky it is also possible to cancel an ongoing restoring operation on any of the Chunked Backup type of drivers.
To issue a backup restoration cancellation we need to alter its status to anything other than restoring. We strongly recommend using the “error” state to avoid any confusion on whether the restore was successful or not.
$ openstack volume backup set --state error BACKUP_ID
After a restore operation has started, if it is then cancelled, the destination volume is useless, as there is no way of knowing how much data, or if any, was actually restored, hence our recommendation of using the “error” state.
With this configuration option will let us select the maximum number of operations, backup and restore, that can be performed concurrently.
This option has a default value of 15, which means that we can have 15 concurrent backups, or 15 concurrent restores, or any combination of backups and restores as long as the sum of the 2 operations don’t exceed 15.
The concurrency limitation of this configuration option is also enforced when
we run multiple processes for the same backup service using the
backup_workers configuration option. It is not a per process restriction,
but global to the service, so we won’t be able to run
on each one of the processes, but on all the running processes from the same
Backups and restore operations are both CPU and memory intensive, but thanks to this option we can limit the concurrency and prevent DoS attacks or just service disruptions caused by many concurrent requests that lead to Out of Memory (OOM) kills.
The amount of memory (RAM) used during the operation depends on the configured chunk size as well as the compression ratio achieved on the data during the operation.
Let’s have a look at how much memory would be needed if we use the default backup chunk size (~1.86 GB) while doing a restore to an RBD volume from a non Ceph backend (Swift, NFS etc).
In a restore operation the worst case scenario, from the memory point of view, is when the compression ratio is close to 0% (the compressed data chunk is almost the same size as the uncompressed data).
In this case the memory usage would be ~5.58 GB of data for each chunk: ~5.58 GB = read buffer + decompressed buffer + write buffer used by the librbd library = ~1.86 GB + 1.86 GB + 1.86 GB
For 15 concurrent restore operations, the cinder-backup service will require ~83.7 GB of memory.
Similar calculations can be done for environment specific scenarios and this config option can be set accordingly.