Collector configuration

Collector configuration

Common options

Options common to all collectors are specified in the [collect] section of the configuration file. The following options are available:

  • collector: Defaults to gnocchi. The name of the collector to load. Must be one of [gnocchi, monasca, prometheus].
  • period: Default to 3600. Duration (in seconds) of the collect period.
  • wait_periods: Defaults to 2. Periods to wait before the current timestamp. This is done to avoid missing some data that hasn’t been retrieved by the data source yet.
  • metrics_conf: Defaults to /etc/cloudkitty/metrics.yml. Path of the metric collection configuration file. See “Metric collection” section below for details.
  • scope_key: Defaults to project_id. Key at which the scope can be found. The scope defines how data collection is split between the processors.

Collector-specific options

Collector-specific options must be specified in the collector_{collector_name} section of cloudkitty.conf.

Gnocchi

Section: collector_gnocchi.

  • gnocchi_auth_type: Defaults to keystone. Defines what authentication method should be used by the gnocchi collector. Must be one of basic (for gnocchi basic authentication) or keystone (for classic keystone authentication). If keystone is chosen, credentials can be specified in a section pointed at by the auth_section parameter.
  • gnocchi_user: For gnocchi basic authentication only. The gnocchi user.
  • gnocchi_endpoint: For gnocchi basic authentication only. The gnocchi endpoint.
  • interface: Defaults to internalURL. For keystone authentication only. The interface to use for keystone URL discovery.
  • region_name: Defaults to RegionOne. For keystone authentication only. Region name.

Monasca

Section: collector_monasca.

  • interface: Defaults to internal. The interface to use for keystone URL discovery.
  • monasca_service_name: Defaults to monasca. Name of the Monasca service in Keystone.

Prometheus

Section collector_prometheus.

  • prometheus_url: Prometheus HTTP API URL.
  • prometheus_user: For HTTP basic authentication. The username.
  • prometheus_password: For HTTP basic authentication. The password.
  • cafile: Option to allow custom certificate authority file.
  • insecure: Option to explicitly allow untrusted HTTPS connections.

Metric collection

Metric collection is highly configurable in cloudkitty. In order to keep the main configuration file as clean as possible, metric collection is configured in a yaml file. The path to this file defaults to /etc/cloudkitty/metrics.yml, but can be configured:

[collect]
metrics_conf = /my/custom/path.yml

Minimal Configuration

This config file has the following format:

metrics: # top-level key
  metric_one: # metric name
    unit: squirrel
    groupby: # attributes by which metrics should be grouped
      - id
    metadata: # additional attributes to retrieve
      - color

At the top level of the file, a metrics key is required. It contains a dict of metrics to collect, each key of the dict being the name of a metric as it is called in the datasource (volume.size or image.size for example).

For each metric, the following attributes are required:

  • unit: the unit in which the metric will be stored after conversion. This is just an indication for humans and has absolutely no impact on metric collection, conversion or rating.
  • groupby: A list of attributes by which metrics should be grouped on collection. These will allow to re-group data when it is retrieved through the v2 API. A typical usecase would be to group data by ID, project ID, domain ID and user ID on collection, but only by user ID on retrieval.
  • metadata: A list of additional attributes that should be collected for the given metric. These can be used for rating rules and will appear in monthly reports. However, it is not possible to group on these attributes. If you need to group on a metadata attribute, move it to the groupby list.

Note

The scope_key is automatically added to groupby.

Optional parameters

Unit conversion

If you need to convert the collected qty (from MiB to GiB for example), it can be done with the factor and offset options. factor defaults to 1 and offset to 0. These options are used to calculate the final result with the following formula: qty = collected_qty * factor + offset.

Note

factor and offset can be floats, integers or fractions.

Example from the default configuration file, conversion from B to MiB for the image.size metric:

metrics:
  image.size:
    groupby:
      - id
    metadata:
      - disk_format
    unit: MiB # Final unit
    factor: 1/1048576 # Dividing by 1024 * 1024

Note

Here we don’t add anything, so there is no need to specify offset.

Quantity mutation

It is also possible to mutate the collected qty with the mutate option. Four values are accepted for this parameter:

  • NONE: This is the default. The collected data is not modifed.
  • CEIL: The qty is rounded up to the closest integer.
  • FLOOR: The qty is rounded down to the closest integer.
  • NUMBOOL: If the collected qty equals 0, leave it at 0. Else, set it to 1.

Warning

Quantity mutation is done after conversion. Example:

factor: 10
mutate: CEIL

In consequence, the configuration above will convert 9.9 to 99 (9.9 -> 99 -> 99) and not to 100 (9.9 -> 10 -> 100)

A typical usecase for the NUMBOOL conversion would be instance uptime collection with the gnocchi collector: In order to know if an instance is running or paused, you can use the cpu metric. This metric is at 0 when the instance is paused. Thus, the qty is mutated to a NUMBOOL because the cpu metric always represents one instance. Rating rules are then defined based on the instance metadata. Example:

metrics:
  cpu:
    unit: instance
    mutate: NUMBOOL
    groupby:
      - id
    metadata:
      - flavor_id

Display name

Sometimes, you’ll want to use another name for a metric, either to shorten it a bit or to make it more explicit. For example, the cpu metric from the previous section could be called instance. That’s what the alt_name option does:

metrics:
  cpu:
    unit: instance
    alt_name: instance
    mutate: NUMBOOL
    groupby:
      - id
    metadata:
      - flavor_id

Collector-specific configuration

Some collectors require extra options. These must be specified through the extra_args option. Some options have defaults, other must be systematically specified. The extra args for each collector are detailed below.

Gnocchi

  • resource_type: No default value. The resource type the current metric is bound to.
  • resource_key: Defaults to id. The attribute containing the unique resource identifier. This is an advanced option, do not modify it unless you know what you’re doing.
  • aggregation_method: Defaults to max. The aggregation method to use when retrieving measures from gnocchi. Must be one of min, max, mean.

Monasca

  • resource_key: Defaults to resource_id. The attribute containing the unique resource identifier. This is an advanced option, do not modify it unless you know what you’re doing.
  • aggregation_method: Defaults to max. The aggregation method to use when retrieving measures from monasca. Must be one of min, max, mean.

Prometheus

  • aggregation_method: Defaults to max. The aggregation method to use when retrieving measures from prometheus. Must be one of avg, min, max, sum, count, stddev, stdvar.
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.