congress.conf

congress.conf

DEFAULT

rpc_conn_pool_size
Type:integer
Default:30

Size of RPC connection pool.

Deprecated Variations
Group Name
DEFAULT rpc_conn_pool_size
conn_pool_min_size
Type:integer
Default:2

The pool size limit for connections expiration policy

conn_pool_ttl
Type:integer
Default:1200

The time-to-live in sec of idle connections in the pool

rpc_zmq_bind_address
Type:string
Default:*

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_bind_address
rpc_zmq_matchmaker
Type:string
Default:redis
Valid Values:redis, sentinel, dummy

MatchMaker driver.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_matchmaker
rpc_zmq_contexts
Type:integer
Default:1

Number of ZeroMQ contexts, defaults to 1.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_contexts
rpc_zmq_topic_backlog
Type:integer
Default:<None>

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_topic_backlog
rpc_zmq_ipc_dir
Type:string
Default:/var/run/openstack

Directory for holding IPC sockets.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_ipc_dir
rpc_zmq_host
Type:string
Default:localhost

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_host
zmq_linger
Type:integer
Default:-1

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

Deprecated Variations
Group Name
DEFAULT rpc_cast_timeout
rpc_poll_timeout
Type:integer
Default:1

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

Deprecated Variations
Group Name
DEFAULT rpc_poll_timeout
zmq_target_expire
Type:integer
Default:300

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

Deprecated Variations
Group Name
DEFAULT zmq_target_expire
zmq_target_update
Type:integer
Default:180

Update period in seconds of a name service record about existing target.

Deprecated Variations
Group Name
DEFAULT zmq_target_update
use_pub_sub
Type:boolean
Default:false

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

Deprecated Variations
Group Name
DEFAULT use_pub_sub
use_router_proxy
Type:boolean
Default:false

Use ROUTER remote proxy.

Deprecated Variations
Group Name
DEFAULT use_router_proxy
use_dynamic_connections
Type:boolean
Default:false

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

zmq_failover_connections
Type:integer
Default:2

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

rpc_zmq_min_port
Type:port number
Default:49153
Minimum Value:0
Maximum Value:65535

Minimal port number for random ports range.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_min_port
rpc_zmq_max_port
Type:integer
Default:65536
Minimum Value:1
Maximum Value:65536

Maximal port number for random ports range.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_max_port
rpc_zmq_bind_port_retries
Type:integer
Default:100

Number of retries to find free port number before fail with ZMQBindError.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_bind_port_retries
rpc_zmq_serialization
Type:string
Default:json
Valid Values:json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

Deprecated Variations
Group Name
DEFAULT rpc_zmq_serialization
zmq_immediate
Type:boolean
Default:true

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_tcp_keepalive
Type:integer
Default:-1

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_idle
Type:integer
Default:-1

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_cnt
Type:integer
Default:-1

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl
Type:integer
Default:-1

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

rpc_thread_pool_size
Type:integer
Default:100

Maximum number of (green) threads to work concurrently.

rpc_message_ttl
Type:integer
Default:300

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_use_acks
Type:boolean
Default:false

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_ack_timeout_base
Type:integer
Default:15

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier
Type:integer
Default:2

Number to multiply base ack timeout by after each retry attempt.

rpc_retry_attempts
Type:integer
Default:3

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

subscribe_on
Type:list
Default:u''

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

executor_thread_pool_size
Type:integer
Default:64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations
Group Name
DEFAULT rpc_thread_pool_size
rpc_response_timeout
Type:integer
Default:60

Seconds to wait for a response from a call.

transport_url
Type:string
Default:<None>

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

rpc_backend
Type:string
Default:rabbit

The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
control_exchange
Type:string
Default:openstack

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

debug
Type:boolean
Default:false
Mutable:This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append
Type:string
Default:<None>
Mutable:This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, logging_context_format_string).

Deprecated Variations
Group Name
DEFAULT log-config
DEFAULT log_config
log_date_format
Type:string
Default:%Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file
Type:string
Default:<None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations
Group Name
DEFAULT logfile
log_dir
Type:string
Default:<None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations
Group Name
DEFAULT logdir
watch_log_file
Type:boolean
Default:false

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog
Type:boolean
Default:false

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal
Type:boolean
Default:false

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility
Type:string
Default:LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json
Type:boolean
Default:false

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr
Type:boolean
Default:false

Log output to standard error. This option is ignored if log_config_append is set.

logging_context_format_string
Type:string
Default:%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context.

logging_default_format_string
Type:string
Default:%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined.

logging_debug_format_suffix
Type:string
Default:%(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG.

logging_exception_prefix
Type:string
Default:%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format.

logging_user_identity_format
Type:string
Default:%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string.

default_log_levels
Type:list
Default:amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors
Type:boolean
Default:false

Enables or disables publication of error events.

instance_format
Type:string
Default:"[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format
Type:string
Default:"[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval
Type:integer
Default:0

Interval, number of seconds, of log rate limiting.

rate_limit_burst
Type:integer
Default:0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level
Type:string
Default:CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations
Type:boolean
Default:false

Enables or disables fatal status of deprecations.

bind_host
Type:host address
Default:0.0.0.0

The host IP to bind to

bind_port
Type:port number
Default:1789
Minimum Value:0
Maximum Value:65535

The port to bind to

max_simultaneous_requests
Type:integer
Default:1024

Thread pool size for eventlet.

tcp_keepalive
Type:boolean
Default:false

Set this to true to enable TCP_KEEALIVE socket option on connections received by the API server.

tcp_keepidle
Type:integer
Default:600

Sets the value of TCP_KEEPIDLE in seconds for each server socket. Only applies if tcp_keepalive is true. Not supported on OS X.

api_workers
Type:integer
Default:1

The number of worker processes to serve the congress API application.

api_paste_config
Type:string
Default:api-paste.ini

The API paste config file to use

auth_strategy
Type:string
Default:keystone

The type of authentication to use

drivers
Type:list
Default:u''

List of driver class paths to import.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:automatically loads all configured drivers
disabled_drivers
Type:list
Default:u''

List of driver names to be disabled. For example, disabled_drivers=nova, plexxi

custom_driver_endpoints
Type:list
Default:u''

List of third party endpoints to be loaded seperated by comma. For example custom_driver_endpoints = ‘test=congress.datasources.test_driver:TestDriver’,

datasource_sync_period
Type:integer
Default:60

The number of seconds to wait between synchronizing datasource config from the database

enable_execute_action
Type:boolean
Default:true

Set the flag to False if you don’t want Congress to execute actions.

replicated_policy_engine
Type:boolean
Default:false

Set the flag to use congress with replicated policy engines.

policy_library_path
Type:string
Default:/etc/congress/library

The directory containing library policy files.

encryption_key_path
Type:string
Default:/etc/congress/keys

The directory containing encryption keys.

tempdir
Type:string
Default:<None>

Explicitly specify the temporary working directory

fatal_exception_format_errors
Type:boolean
Default:false

Make exception message format errors fatal

cors

allowed_origin
Type:list
Default:<None>

Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com

allow_credentials
Type:boolean
Default:true

Indicate that the actual request can include user credentials

expose_headers
Type:list
Default:X-Auth-Token,X-OpenStack-Request-ID,X-Subject-Token,X-Service-Token

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age
Type:integer
Default:3600

Maximum cache age of CORS preflight requests.

allow_methods
Type:list
Default:GET,PUT,POST,DELETE,PATCH

Indicate which methods can be used during the actual request.

allow_headers
Type:list
Default:X-Auth-Token,X-OpenStack-Request-ID,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id

Indicate which header field names may be used during the actual request.

database

sqlite_synchronous
Type:boolean
Default:true

If True, SQLite uses synchronous mode.

Deprecated Variations
Group Name
DEFAULT sqlite_synchronous
backend
Type:string
Default:sqlalchemy

The back end to use for the database.

Deprecated Variations
Group Name
DEFAULT db_backend
connection
Type:string
Default:<None>

The SQLAlchemy connection string to use to connect to the database.

Deprecated Variations
Group Name
DEFAULT sql_connection
DATABASE sql_connection
sql connection
slave_connection
Type:string
Default:<None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode
Type:string
Default:TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

mysql_enable_ndb
Type:boolean
Default:false

If True, transparently enables support for handling MySQL Cluster (NDB).

connection_recycle_time
Type:integer
Default:3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

Deprecated Variations
Group Name
DATABASE idle_timeout
database idle_timeout
DEFAULT sql_idle_timeout
DATABASE sql_idle_timeout
sql idle_timeout
min_pool_size
Type:integer
Default:1

Minimum number of SQL connections to keep open in a pool.

Deprecated Variations
Group Name
DEFAULT sql_min_pool_size
DATABASE sql_min_pool_size

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:The option to set the minimum pool size is not supported by sqlalchemy.
max_pool_size
Type:integer
Default:5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

Deprecated Variations
Group Name
DEFAULT sql_max_pool_size
DATABASE sql_max_pool_size
max_retries
Type:integer
Default:10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

Deprecated Variations
Group Name
DEFAULT sql_max_retries
DATABASE sql_max_retries
retry_interval
Type:integer
Default:10

Interval between retries of opening a SQL connection.

Deprecated Variations
Group Name
DEFAULT sql_retry_interval
DATABASE reconnect_interval
max_overflow
Type:integer
Default:50

If set, use this value for max_overflow with SQLAlchemy.

Deprecated Variations
Group Name
DEFAULT sql_max_overflow
DATABASE sqlalchemy_max_overflow
connection_debug
Type:integer
Default:0
Minimum Value:0
Maximum Value:100

Verbosity of SQL debugging information: 0=None, 100=Everything.

Deprecated Variations
Group Name
DEFAULT sql_connection_debug
connection_trace
Type:boolean
Default:false

Add Python stack traces to SQL as comment strings.

Deprecated Variations
Group Name
DEFAULT sql_connection_trace
pool_timeout
Type:integer
Default:<None>

If set, use this value for pool_timeout with SQLAlchemy.

Deprecated Variations
Group Name
DATABASE sqlalchemy_pool_timeout
use_db_reconnect
Type:boolean
Default:false

Enable the experimental use of database reconnect on connection lost.

db_retry_interval
Type:integer
Default:1

Seconds between retries of a database transaction.

db_inc_retry_interval
Type:boolean
Default:true

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval
Type:integer
Default:10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries
Type:integer
Default:20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

connection_parameters
Type:string
Default:u''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

dse

bus_id
Type:string
Default:bus

Unique ID of this DSE bus

ping_timeout
Type:integer
Default:5

RPC short timeout in seconds; used to ping destination

long_timeout
Type:integer
Default:120

RPC long timeout in seconds; used on potentially long running requests such as datasource action and PE row query

time_to_resub
Type:integer
Default:10

Time in seconds which a subscriber will wait for missing update before attempting to resubscribe from publisher

execute_action_retry
Type:boolean
Default:false

Set the flag to True to make Congress retry execute actions; may cause duplicate executions.

execute_action_retry_timeout
Type:integer
Default:600

The number of seconds to retry execute action before giving up. Zero or negative value means never give up.

keystone_authtoken

www_authenticate_uri
Type:string
Default:<None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

Deprecated Variations
Group Name
keystone_authtoken auth_uri
auth_uri
Type:string
Default:<None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

Warning

This option is deprecated for removal since Queens. Its value may be silently ignored in the future.

Reason:The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.
auth_version
Type:string
Default:<None>

API version of the admin Identity API endpoint.

delay_auth_decision
Type:boolean
Default:false

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

http_connect_timeout
Type:integer
Default:<None>

Request timeout value for communicating with Identity API server.

http_request_max_retries
Type:integer
Default:3

How many times are we trying to reconnect when communicating with Identity API Server.

cache
Type:string
Default:<None>

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

certfile
Type:string
Default:<None>

Required if identity server requires client certificate

keyfile
Type:string
Default:<None>

Required if identity server requires client certificate

cafile
Type:string
Default:<None>

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

insecure
Type:boolean
Default:false

Verify HTTPS connections.

region_name
Type:string
Default:<None>

The region in which the identity server can be found.

signing_dir
Type:string
Default:<None>

Directory used to cache files related to PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
memcached_servers
Type:list
Default:<None>

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

Deprecated Variations
Group Name
keystone_authtoken memcache_servers
token_cache_time
Type:integer
Default:300

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

revocation_cache_time
Type:integer
Default:10

Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A high number of revocation events combined with a low cache duration may significantly reduce performance. Only valid for PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
memcache_security_strategy
Type:string
Default:None
Valid Values:None, MAC, ENCRYPT

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_secret_key
Type:string
Default:<None>

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_pool_dead_retry
Type:integer
Default:300

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize
Type:integer
Default:10

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout
Type:integer
Default:3

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout
Type:integer
Default:60

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_pool_conn_get_timeout
Type:integer
Default:10

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_use_advanced_pool
Type:boolean
Default:false

(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.

include_service_catalog
Type:boolean
Default:true

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

enforce_token_bind
Type:string
Default:permissive

Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

check_revocations_for_cached
Type:boolean
Default:false

If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the identity server.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
hash_algorithms
Type:list
Default:md5

Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those supported by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one first for performance. The result of the first hash will be stored in the cache. This will typically be set to multiple values only while migrating from a less secure algorithm to a more secure one. Once all the old tokens are expired this option should be set to a single value for better performance.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
service_token_roles
Type:list
Default:service

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required
Type:boolean
Default:false

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

auth_type
Type:unknown type
Default:<None>

Authentication type to load

Deprecated Variations
Group Name
keystone_authtoken auth_plugin
auth_section
Type:unknown type
Default:<None>

Config Section from which to load plugin specific options

matchmaker_redis

host
Type:string
Default:127.0.0.1

Host to locate redis.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
port
Type:port number
Default:6379
Minimum Value:0
Maximum Value:65535

Use this port to connect to redis host.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
password
Type:string
Default:u''

Password for Redis server (optional).

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
sentinel_hosts
Type:list
Default:u''

List of Redis Sentinel hosts (fault tolerance mode), e.g., [host:port, host1:port … ]

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
sentinel_group_name
Type:string
Default:oslo-messaging-zeromq

Redis replica set name.

wait_timeout
Type:integer
Default:2000

Time in ms to wait between connection attempts.

check_timeout
Type:integer
Default:20000

Time in ms to wait before the transaction is killed.

socket_timeout
Type:integer
Default:10000

Timeout in ms on blocking socket operations.

oslo_messaging_amqp

container_name
Type:string
Default:<None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations
Group Name
amqp1 container_name
idle_timeout
Type:integer
Default:0

Timeout for inactive connections (in seconds)

Deprecated Variations
Group Name
amqp1 idle_timeout
trace
Type:boolean
Default:false

Debug: dump AMQP frames to stdout

Deprecated Variations
Group Name
amqp1 trace
ssl
Type:boolean
Default:false

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file
Type:string
Default:u''

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations
Group Name
amqp1 ssl_ca_file
ssl_cert_file
Type:string
Default:u''

Self-identifying certificate PEM file for client authentication

Deprecated Variations
Group Name
amqp1 ssl_cert_file
ssl_key_file
Type:string
Default:u''

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations
Group Name
amqp1 ssl_key_file
ssl_key_password
Type:string
Default:<None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations
Group Name
amqp1 ssl_key_password
ssl_verify_vhost
Type:boolean
Default:false

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

allow_insecure_clients
Type:boolean
Default:false

Accept clients using either SSL or plain TCP

Deprecated Variations
Group Name
amqp1 allow_insecure_clients

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Not applicable - not a SSL server
sasl_mechanisms
Type:string
Default:u''

Space separated list of acceptable SASL mechanisms

Deprecated Variations
Group Name
amqp1 sasl_mechanisms
sasl_config_dir
Type:string
Default:u''

Path to directory that contains the SASL configuration

Deprecated Variations
Group Name
amqp1 sasl_config_dir
sasl_config_name
Type:string
Default:u''

Name of configuration file (without .conf suffix)

Deprecated Variations
Group Name
amqp1 sasl_config_name
sasl_default_realm
Type:string
Default:u''

SASL realm to use if no realm present in username

username
Type:string
Default:u''

User name for message broker authentication

Deprecated Variations
Group Name
amqp1 username

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Should use configuration option transport_url to provide the username.
password
Type:string
Default:u''

Password for message broker authentication

Deprecated Variations
Group Name
amqp1 password

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Should use configuration option transport_url to provide the password.
connection_retry_interval
Type:integer
Default:1
Minimum Value:1

Seconds to pause before attempting to re-connect.

connection_retry_backoff
Type:integer
Default:2
Minimum Value:0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max
Type:integer
Default:30
Minimum Value:1

Maximum limit for connection_retry_interval + connection_retry_backoff

Type:integer
Default:10
Minimum Value:1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry
Type:integer
Default:0
Minimum Value:-1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout
Type:integer
Default:30
Minimum Value:5

The deadline for an rpc reply message delivery.

default_send_timeout
Type:integer
Default:30
Minimum Value:5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout
Type:integer
Default:30
Minimum Value:5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

Type:integer
Default:600
Minimum Value:1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode
Type:string
Default:dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost
Type:boolean
Default:true

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix
Type:string
Default:exclusive

address prefix used when sending to a specific server

Deprecated Variations
Group Name
amqp1 server_request_prefix
broadcast_prefix
Type:string
Default:broadcast

address prefix used when broadcasting to all servers

Deprecated Variations
Group Name
amqp1 broadcast_prefix
group_request_prefix
Type:string
Default:unicast

address prefix when sending to any server in group

Deprecated Variations
Group Name
amqp1 group_request_prefix
rpc_address_prefix
Type:string
Default:openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix
Type:string
Default:openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address
Type:string
Default:multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address
Type:string
Default:unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address
Type:string
Default:anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange
Type:string
Default:<None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange
Type:string
Default:<None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

Type:integer
Default:200
Minimum Value:1

Window size for incoming RPC Reply messages.

rpc_server_credit
Type:integer
Default:100
Minimum Value:1

Window size for incoming RPC Request messages

notify_server_credit
Type:integer
Default:100
Minimum Value:1

Window size for incoming Notification messages

pre_settled
Type:multi-valued
Default:rpc-cast
Default:rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

oslo_messaging_kafka

kafka_default_host
Type:string
Default:localhost

Default Kafka broker Host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
kafka_default_port
Type:port number
Default:9092
Minimum Value:0
Maximum Value:65535

Default Kafka broker Port

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
kafka_max_fetch_bytes
Type:integer
Default:1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout
Type:floating point
Default:1.0

Default timeout(s) for Kafka consumers

pool_size
Type:integer
Default:10

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Driver no longer uses connection pool.
conn_pool_min_size
Type:integer
Default:2

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Driver no longer uses connection pool.
conn_pool_ttl
Type:integer
Default:1200

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Driver no longer uses connection pool.
consumer_group
Type:string
Default:oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout
Type:floating point
Default:0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size
Type:integer
Default:16384

Size of batch for the producer async send

enable_auto_commit
Type:boolean
Default:false

Enable asynchronous consumer commits

max_poll_records
Type:integer
Default:500

The maximum number of records returned in a poll call

security_protocol
Type:string
Default:PLAINTEXT
Valid Values:PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL

Protocol used to communicate with brokers

sasl_mechanism
Type:string
Default:PLAIN

Mechanism when security protocol is SASL

ssl_cafile
Type:string
Default:u''

CA certificate PEM file used to verify the server certificate

oslo_messaging_notifications

driver
Type:multi-valued
Default:u''

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations
Group Name
DEFAULT notification_driver
transport_url
Type:string
Default:<None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations
Group Name
DEFAULT notification_transport_url
topics
Type:list
Default:notifications

AMQP topic used for OpenStack notifications.

Deprecated Variations
Group Name
rpc_notifier2 topics
DEFAULT notification_topics
retry
Type:integer
Default:-1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

oslo_messaging_rabbit

amqp_durable_queues
Type:boolean
Default:false

Use durable queues in AMQP.

Deprecated Variations
Group Name
DEFAULT amqp_durable_queues
DEFAULT rabbit_durable_queues
amqp_auto_delete
Type:boolean
Default:false

Auto-delete queues in AMQP.

Deprecated Variations
Group Name
DEFAULT amqp_auto_delete
ssl
Type:boolean
Default:false

Connect over SSL.

Deprecated Variations
Group Name
oslo_messaging_rabbit rabbit_use_ssl
ssl_version
Type:string
Default:u''

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_version
ssl_key_file
Type:string
Default:u''

SSL key file (valid only if SSL enabled).

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_keyfile
ssl_cert_file
Type:string
Default:u''

SSL cert file (valid only if SSL enabled).

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_certfile
ssl_ca_file
Type:string
Default:u''

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_ca_certs
kombu_reconnect_delay
Type:floating point
Default:1.0

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations
Group Name
DEFAULT kombu_reconnect_delay
kombu_compression
Type:string
Default:<None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout
Type:integer
Default:60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_reconnect_timeout
kombu_failover_strategy
Type:string
Default:round-robin
Valid Values:round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_host
Type:string
Default:localhost

The RabbitMQ broker address where a single node is used.

Deprecated Variations
Group Name
DEFAULT rabbit_host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_port
Type:port number
Default:5672
Minimum Value:0
Maximum Value:65535

The RabbitMQ broker port where a single node is used.

Deprecated Variations
Group Name
DEFAULT rabbit_port

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_hosts
Type:list
Default:$rabbit_host:$rabbit_port

RabbitMQ HA cluster host:port pairs.

Deprecated Variations
Group Name
DEFAULT rabbit_hosts

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_userid
Type:string
Default:guest

The RabbitMQ userid.

Deprecated Variations
Group Name
DEFAULT rabbit_userid

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_password
Type:string
Default:guest

The RabbitMQ password.

Deprecated Variations
Group Name
DEFAULT rabbit_password

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_login_method
Type:string
Default:AMQPLAIN
Valid Values:PLAIN, AMQPLAIN, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations
Group Name
DEFAULT rabbit_login_method
rabbit_virtual_host
Type:string
Default:/

The RabbitMQ virtual host.

Deprecated Variations
Group Name
DEFAULT rabbit_virtual_host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_retry_interval
Type:integer
Default:1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff
Type:integer
Default:2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations
Group Name
DEFAULT rabbit_retry_backoff
rabbit_interval_max
Type:integer
Default:30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_max_retries
Type:integer
Default:0

Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count).

Deprecated Variations
Group Name
DEFAULT rabbit_max_retries

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

rabbit_ha_queues
Type:boolean
Default:false

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations
Group Name
DEFAULT rabbit_ha_queues
rabbit_transient_queues_ttl
Type:integer
Default:1800
Minimum Value:1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count
Type:integer
Default:0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold
Type:integer
Default:60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disable the heartbeat). EXPERIMENTAL

heartbeat_rate
Type:integer
Default:2

How often times during the heartbeat_timeout_threshold we check the heartbeat.

oslo_messaging_zmq

rpc_zmq_bind_address
Type:string
Default:*

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_bind_address
rpc_zmq_matchmaker
Type:string
Default:redis
Valid Values:redis, sentinel, dummy

MatchMaker driver.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_matchmaker
rpc_zmq_contexts
Type:integer
Default:1

Number of ZeroMQ contexts, defaults to 1.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_contexts
rpc_zmq_topic_backlog
Type:integer
Default:<None>

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_topic_backlog
rpc_zmq_ipc_dir
Type:string
Default:/var/run/openstack

Directory for holding IPC sockets.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_ipc_dir
rpc_zmq_host
Type:string
Default:localhost

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_host
zmq_linger
Type:integer
Default:-1

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

Deprecated Variations
Group Name
DEFAULT rpc_cast_timeout
rpc_poll_timeout
Type:integer
Default:1

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

Deprecated Variations
Group Name
DEFAULT rpc_poll_timeout
zmq_target_expire
Type:integer
Default:300

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

Deprecated Variations
Group Name
DEFAULT zmq_target_expire
zmq_target_update
Type:integer
Default:180

Update period in seconds of a name service record about existing target.

Deprecated Variations
Group Name
DEFAULT zmq_target_update
use_pub_sub
Type:boolean
Default:false

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

Deprecated Variations
Group Name
DEFAULT use_pub_sub
use_router_proxy
Type:boolean
Default:false

Use ROUTER remote proxy.

Deprecated Variations
Group Name
DEFAULT use_router_proxy
use_dynamic_connections
Type:boolean
Default:false

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

zmq_failover_connections
Type:integer
Default:2

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

rpc_zmq_min_port
Type:port number
Default:49153
Minimum Value:0
Maximum Value:65535

Minimal port number for random ports range.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_min_port
rpc_zmq_max_port
Type:integer
Default:65536
Minimum Value:1
Maximum Value:65536

Maximal port number for random ports range.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_max_port
rpc_zmq_bind_port_retries
Type:integer
Default:100

Number of retries to find free port number before fail with ZMQBindError.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_bind_port_retries
rpc_zmq_serialization
Type:string
Default:json
Valid Values:json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

Deprecated Variations
Group Name
DEFAULT rpc_zmq_serialization
zmq_immediate
Type:boolean
Default:true

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_tcp_keepalive
Type:integer
Default:-1

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_idle
Type:integer
Default:-1

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_cnt
Type:integer
Default:-1

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl
Type:integer
Default:-1

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

rpc_thread_pool_size
Type:integer
Default:100

Maximum number of (green) threads to work concurrently.

rpc_message_ttl
Type:integer
Default:300

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_use_acks
Type:boolean
Default:false

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_ack_timeout_base
Type:integer
Default:15

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier
Type:integer
Default:2

Number to multiply base ack timeout by after each retry attempt.

rpc_retry_attempts
Type:integer
Default:3

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

subscribe_on
Type:list
Default:u''

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

oslo_policy

enforce_scope
Type:boolean
Default:false

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

policy_file
Type:string
Default:policy.json

The file that defines policies.

Deprecated Variations
Group Name
DEFAULT policy_file
policy_default_rule
Type:string
Default:default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations
Group Name
DEFAULT policy_default_rule
policy_dirs
Type:multi-valued
Default:policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations
Group Name
DEFAULT policy_dirs
remote_content_type
Type:string
Default:application/x-www-form-urlencoded
Valid Values:application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt
Type:boolean
Default:false

server identity verification for REST based policy check

remote_ssl_ca_crt_file
Type:string
Default:<None>

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file
Type:string
Default:<None>

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file
Type:string
Default:<None>

Absolute path client key file REST based policy check

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.