Designate Configuration Guide

Designate Configuration Guide

Designate configuration is needed for getting it work correctly either with real OpenStack environment or without OpenStack environment.

NOTE: The most of the following operations should performed in designate directory.

  1. Create the designate.conf file

    $ editor designate.conf
    
  2. Copy or mirror the configuration from this sample file here:

    [DEFAULT]
    ########################
    ## General Configuration
    ########################
    # Show debugging output in logs (sets DEBUG log level output)
    debug = True
    
    # Top-level directory for maintaining designate's state.
    state_path = $pybasedir/state
    
    # Driver used for issuing notifications
    notification_driver = messaging
    
    # Use "sudo designate-rootwrap /etc/designate/rootwrap.conf" to use the real
    # root filter facility.
    # Change to "sudo" to skip the filtering and just run the command directly
    # root_helper = sudo
    
    # Supported record types
    #supported_record_type = A, AAAA, CNAME, MX, SRV, TXT, SPF, NS, PTR, SSHFP, SOA
    
    # RabbitMQ Config
    rabbit_userid = designate
    rabbit_password = designate
    #rabbit_virtual_host = /
    #rabbit_use_ssl = False
    #rabbit_hosts = 127.0.0.1:5672
    
    ########################
    ## Service Configuration
    ########################
    #-----------------------
    # Central Service
    #-----------------------
    [service:central]
    # Maximum domain name length
    #max_domain_name_len = 255
    
    # Maximum record name length
    #max_record_name_len = 255
    
    #-----------------------
    # API Service
    #-----------------------
    [service:api]
    # Address to bind the API server
    api_host = 0.0.0.0
    
    # Port to bind the API server
    api_port = 9001
    
    # Authentication strategy to use - can be either "noauth" or "keystone"
    auth_strategy = noauth
    
    # Enable API Version 1
    enable_api_v1 = True
    
    # Enabled API Version 1 extensions
    enabled_extensions_v1 = diagnostics, quotas, reports, sync, touch
    
    # Enable API Version 2
    enable_api_v2 = True
    
    # Enabled API Version 2 extensions
    enabled_extensions_v2 = quotas, reports
    
    #-----------------------
    # mDNS Service
    #-----------------------
    [service:mdns]
    #workers = None
    #host = 0.0.0.0
    #port = 5354
    #tcp_backlog = 100
    
    #-----------------------
    # Worker Service
    #-----------------------
    [service:worker]
    # Whether to send events to worker instead of Pool Manager
    enabled = True
    #workers = None
    #threads = 1000
    #threshold_percentage = 100
    #poll_timeout = 30
    #poll_retry_interval = 15
    #poll_max_retries = 10
    #poll_delay = 5
    notify = True
    
    #-----------------------
    # Producer Service
    #-----------------------
    [service:producer]
    #workers = None
    #threads = 1000
    #enabled_tasks = None
    #export_synchronous = True
    
    #------------------------
    # Deleted domains purging
    #------------------------
    [producer_task:domain_purge]
    #interval = 3600  # 1h
    #batch_size = 100
    #time_threshold = 604800  # 7 days
    
    #------------------------
    # Delayed zones NOTIFY
    #------------------------
    [producer_task:delayed_notify]
    #interval = 5
    
    #------------------------
    # Worker Periodic Recovery
    #------------------------
    [producer_task:worker_periodic_recovery]
    #interval = 120
    
    ########################
    ## Storage Configuration
    ########################
    #-----------------------
    # SQLAlchemy Storage
    #-----------------------
    [storage:sqlalchemy]
    # Database connection string - to configure options for a given implementation
    # like sqlalchemy or other see below
    connection = mysql+pymysql://root:password@127.0.0.1/designate?charset=utf8
    #connection_debug = 100
    #connection_trace = True
    #sqlite_synchronous = True
    #idle_timeout = 3600
    #max_retries = 10
    #retry_interval = 10
    
  3. You can generate full sample designate.conf (if it does not already exist):

    $ oslo-config-generator --config-file etc/designate/designate-config-generator.conf --output-file /etc/designate/designate.conf
    
[DEFAULT]

#
# From designate.opts
#

# Name of this node (string value)
#host = ubuntu-xenial-limestone-regionone-0004961845

# Directory where the designate python module is installed (string value)
#pybasedir = /home/zuul/src/git.openstack.org/openstack/designate

# Top-level directory for maintaining designate's state (string value)
#state_path = /var/lib/designate

# Central Topic (string value)
#central_topic = central

# mDNS Topic (string value)
#mdns_topic = mdns

# Pool Manager Topic (string value)
#pool_manager_topic = pool_manager

# Worker Topic (string value)
#worker_topic = worker

# TTL Value (integer value)
#default_ttl = 3600

# SOA refresh-min value (integer value)
# Deprecated group/name - [DEFAULT]/default_soa_refresh
#default_soa_refresh_min = 3500

# SOA max value (integer value)
#default_soa_refresh_max = 3600

# SOA retry (integer value)
#default_soa_retry = 600

# SOA expire (integer value)
#default_soa_expire = 86400

# SOA minimum value (integer value)
#default_soa_minimum = 3600

# Supported record types (list value)
#supported_record_type = A,AAAA,CNAME,MX,SRV,TXT,SPF,NS,PTR,SSHFP,SOA

# Which API to use. (string value)
#network_api = neutron

# Send notifications if there's a failure in the API. (boolean value)
#notify_api_faults = false

# The notification plugin to use (string value)
#notification_plugin = default

# Quota driver to use (string value)
#quota_driver = storage

# Number of zones allowed per tenant (integer value)
#quota_zones = 10

# Number of recordsets allowed per zone (integer value)
#quota_zone_recordsets = 500

# Number of records allowed per zone (integer value)
#quota_zone_records = 500

# Number of records allowed per recordset (integer value)
#quota_recordset_records = 20

# Number of recordsets allowed in a zone export (integer value)
#quota_api_export_size = 1000

# Timeout in seconds for XFR's. (integer value)
#xfr_timeout = 10

# designate-rootwrap configuration (string value)
#root_helper = sudo designate-rootwrap /etc/designate/rootwrap.conf

# Number of backlog requests to configure the socket with (integer value)
#backlog = 4096

# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
# supported on OS X. (integer value)
#tcp_keepidle = 600

#
# From oslo.log
#

# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false

# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, logging_context_format_string). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>

# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
#log_date_format = %Y-%m-%d %H:%M:%S

# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>

# (Optional) The base directory used for relative log_file  paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>

# Uses logging handler designed to watch file system. When log file is moved or
# removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and Linux
# platform is used. This option is ignored if log_config_append is set. (boolean
# value)
#watch_log_file = false

# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append is
# set. (boolean value)
#use_syslog = false

# Enable journald for logging. If running in a systemd environment you may wish
# to enable journal support. Doing so will use the journal native protocol which
# includes structured metadata in addition to log messages.This option is
# ignored if log_config_append is set. (boolean value)
#use_journal = false

# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER

# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
#use_stderr = false

# Format string to use for log messages with context. (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

# Format string to use for log messages when context is undefined. (string
# value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

# Additional data to append to log message when logging level for the message is
# DEBUG. (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

# Prefix each line of exception output with this format. (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. (string value)
#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
#default_log_levels = amqplib=WARN,amqp=WARN,boto=WARN,eventlet.wsgi.server=WARN,iso8601=WARN,kazoo.client=WARN,keystone=INFO,keystonemiddleware.auth_token=INFO,oslo_messaging=WARN,oslo.messaging=INFO,oslo_service.loopingcall=WARN,sqlalchemy=WARN,stevedore=WARN,suds=INFO

# Enables or disables publication of error events. (boolean value)
#publish_errors = false

# The format for an instance that is passed with the log message. (string value)
#instance_format = "[instance: %(uuid)s] "

# The format for an instance UUID that is passed with the log message. (string
# value)
#instance_uuid_format = "[instance: %(uuid)s] "

# Interval, number of seconds, of log rate limiting. (integer value)
#rate_limit_interval = 0

# Maximum number of logged messages per rate_limit_interval. (integer value)
#rate_limit_burst = 0

# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
# empty string. Logs with level greater or equal to rate_limit_except_level are
# not filtered. An empty string means that all levels are filtered. (string
# value)
#rate_limit_except_level = CRITICAL

# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false

#
# From oslo.messaging
#

# Size of RPC connection pool. (integer value)
#rpc_conn_pool_size = 30

# The pool size limit for connections expiration policy (integer value)
#conn_pool_min_size = 2

# The time-to-live in sec of idle connections in the pool (integer value)
#conn_pool_ttl = 1200

# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
# The "host" option should point or resolve to this address. (string value)
#rpc_zmq_bind_address = *

# MatchMaker driver. (string value)
# Allowed values: redis, sentinel, dummy
#rpc_zmq_matchmaker = redis

# Number of ZeroMQ contexts, defaults to 1. (integer value)
#rpc_zmq_contexts = 1

# Maximum number of ingress messages to locally buffer per topic. Default is
# unlimited. (integer value)
#rpc_zmq_topic_backlog = <None>

# Directory for holding IPC sockets. (string value)
#rpc_zmq_ipc_dir = /var/run/openstack

# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
# "host" option, if running Nova. (string value)
#rpc_zmq_host = localhost

# Number of seconds to wait before all pending messages will be sent after
# closing a socket. The default value of -1 specifies an infinite linger period.
# The value of 0 specifies no linger period. Pending messages shall be discarded
# immediately when the socket is closed. Positive values specify an upper bound
# for the linger period. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
#zmq_linger = -1

# The default number of seconds that poll should wait. Poll raises timeout
# exception when timeout expired. (integer value)
#rpc_poll_timeout = 1

# Expiration timeout in seconds of a name service record about existing target (
# < 0 means no timeout). (integer value)
#zmq_target_expire = 300

# Update period in seconds of a name service record about existing target.
# (integer value)
#zmq_target_update = 180

# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
# value)
#use_pub_sub = false

# Use ROUTER remote proxy. (boolean value)
#use_router_proxy = false

# This option makes direct connections dynamic or static. It makes sense only
# with use_router_proxy=False which means to use direct connections for direct
# message types (ignored otherwise). (boolean value)
#use_dynamic_connections = false

# How many additional connections to a host will be made for failover reasons.
# This option is actual only in dynamic connections mode. (integer value)
#zmq_failover_connections = 2

# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
#rpc_zmq_min_port = 49153

# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
#rpc_zmq_max_port = 65536

# Number of retries to find free port number before fail with ZMQBindError.
# (integer value)
#rpc_zmq_bind_port_retries = 100

# Default serialization mechanism for serializing/deserializing
# outgoing/incoming messages (string value)
# Allowed values: json, msgpack
#rpc_zmq_serialization = json

# This option configures round-robin mode in zmq socket. True means not keeping
# a queue when server side disconnects. False means to keep queue and messages
# even if server is disconnected, when the server appears we send all
# accumulated messages to it. (boolean value)
#zmq_immediate = true

# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
# other negative value) means to skip any overrides and leave it to OS default;
# 0 and 1 (or any other positive value) mean to disable and enable the option
# respectively. (integer value)
#zmq_tcp_keepalive = -1

# The duration between two keepalive transmissions in idle condition. The unit
# is platform dependent, for example, seconds in Linux, milliseconds in Windows
# etc. The default value of -1 (or any other negative value and 0) means to skip
# any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_idle = -1

# The number of retransmissions to be carried out before declaring that remote
# end is not available. The default value of -1 (or any other negative value and
# 0) means to skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_cnt = -1

# The duration between two successive keepalive retransmissions, if
# acknowledgement to the previous keepalive transmission is not received. The
# unit is platform dependent, for example, seconds in Linux, milliseconds in
# Windows etc. The default value of -1 (or any other negative value and 0) means
# to skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_intvl = -1

# Maximum number of (green) threads to work concurrently. (integer value)
#rpc_thread_pool_size = 100

# Expiration timeout in seconds of a sent/received message after which it is not
# tracked anymore by a client/server. (integer value)
#rpc_message_ttl = 300

# Wait for message acknowledgements from receivers. This mechanism works only
# via proxy without PUB/SUB. (boolean value)
#rpc_use_acks = false

# Number of seconds to wait for an ack from a cast/call. After each retry
# attempt this timeout is multiplied by some specified multiplier. (integer
# value)
#rpc_ack_timeout_base = 15

# Number to multiply base ack timeout by after each retry attempt. (integer
# value)
#rpc_ack_timeout_multiplier = 2

# Default number of message sending attempts in case of any problems occurred:
# positive value N means at most N retries, 0 means no retries, None or -1 (or
# any other negative values) mean to retry forever. This option is used only if
# acknowledgments are enabled. (integer value)
#rpc_retry_attempts = 3

# List of publisher hosts SubConsumer can subscribe on. This option has higher
# priority then the default publishers list taken from the matchmaker. (list
# value)
#subscribe_on =

# Size of executor thread pool when executor is threading or eventlet. (integer
# value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64

# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60

# A URL representing the messaging driver to use and its full configuration.
# (string value)
#transport_url = <None>

# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
# include amqp and zmq. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rpc_backend = rabbit

# The default exchange under which topics are scoped. May be overridden by an
# exchange name specified in the transport_url option. (string value)
#control_exchange = designate

#
# From oslo.service.periodic_task
#

# Some periodic tasks can be run in a separate process. Should we run them here?
# (boolean value)
#run_external_periodic_tasks = true

#
# From oslo.service.service
#

# Enable eventlet backdoor.  Acceptable values are 0, <port>, and <start>:<end>,
# where 0 results in listening on a random tcp port number; <port> results in
# listening on the specified port number (and not enabling backdoor if that port
# is in use); and <start>:<end> results in listening on the smallest unused port
# number within the specified range of port numbers.  The chosen port is
# displayed in the service's log file. (string value)
#backdoor_port = <None>

# Enable eventlet backdoor, using the provided path as a unix socket that can
# receive connections. This option is mutually exclusive with 'backdoor_port' in
# that only one should be provided. If both are provided then the existence of
# this option overrides the usage of that option. (string value)
#backdoor_socket = <None>

# Enables or disables logging values of all registered options when starting a
# service (at DEBUG level). (boolean value)
#log_options = true

# Specify a timeout after which a gracefully shutdown server will exit. Zero
# value means endless wait. (integer value)
#graceful_shutdown_timeout = 60


[backend:agent:bind9]

#
# From designate.agent
#

# RNDC Host (string value)
#rndc_host = 127.0.0.1

# RNDC Port (integer value)
#rndc_port = 953

# RNDC Config File (string value)
#rndc_config_file = <None>

# RNDC Key File (string value)
#rndc_key_file = <None>

# Path where zone files are stored (string value)
#zone_file_path = $state_path/zones

# Host to query when finding zones (string value)
#query_destination = 127.0.0.1


[backend:agent:denominator]

#
# From designate.agent
#

# Name of the affected provider (string value)
#name = fake

# Path to Denominator configuration file (string value)
#config_file = /etc/denominator.conf


[backend:agent:djbdns]

#
# From designate.agent
#

# tcpclient executable path or rootwrap command name (string value)
#tcpclient_cmd_name = tcpclient

# axfr-get executable path or rootwrap command name (string value)
#axfr_get_cmd_name = axfr-get

# tinydns-data executable path or rootwrap command name (string value)
#tinydns_data_cmd_name = tinydns-data

# TinyDNS data directory (string value)
#tinydns_datadir = /var/lib/djbdns

# Host to query when finding zones (string value)
#query_destination = 127.0.0.1


[backend:agent:gdnsd]

#
# From designate.agent
#

# gdnsd executable path or rootwrap command name (string value)
#gdnsd_cmd_name = gdnsd

# gdnsd configuration directory path (string value)
#confdir_path = /etc/gdnsd

# Host to query when finding zones (string value)
#query_destination = 127.0.0.1


[backend:agent:knot2]

#
# From designate.agent
#

# knotc executable path or rootwrap command name (string value)
#knotc_cmd_name = knotc

# Host to query when finding zones (string value)
#query_destination = 127.0.0.1


[coordination]

#
# From designate.opts
#

# The backend URL to use for distributed coordination. If unset services that
# need coordination will function as a standalone service. (string value)
#backend_url = <None>

# Number of seconds between heartbeats for distributed coordination. (floating
# point value)
#heartbeat_interval = 1.0

# Number of seconds between checks to see if group membership has changed
# (floating point value)
#run_watchers_interval = 10.0


[cors]

#
# From oslo.middleware
#

# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
# slash. Example: https://horizon.example.com (list value)
#allowed_origin = <None>

# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true

# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers = X-OpenStack-Request-ID,Host

# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600

# Indicate which methods can be used during the actual request. (list value)
#allow_methods = GET,PUT,POST,DELETE,PATCH,HEAD

# Indicate which header field names may be used during the actual request. (list
# value)
#allow_headers = X-Auth-Token,X-Auth-Sudo-Tenant-ID,X-Auth-Sudo-Project-ID,X-Auth-All-Projects,X-Designate-Edit-Managed-Records,OpenStack-DNS-Hide-Counts


[database]

#
# From oslo.db
#

# If True, SQLite uses synchronous mode. (boolean value)
#sqlite_synchronous = true

# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy

# The SQLAlchemy connection string to use to connect to the database. (string
# value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>

# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>

# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
# the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL

# If True, transparently enables support for handling MySQL Cluster (NDB).
# (boolean value)
#mysql_enable_ndb = false

# Timeout before idle SQL connections are reaped. (integer value)
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
# Deprecated group/name - [DATABASE]/sql_idle_timeout
# Deprecated group/name - [sql]/idle_timeout
#idle_timeout = 3600

# Minimum number of SQL connections to keep open in a pool. (integer value)
# Deprecated group/name - [DEFAULT]/sql_min_pool_size
# Deprecated group/name - [DATABASE]/sql_min_pool_size
#min_pool_size = 1

# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
# indicates no limit. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
# Deprecated group/name - [DATABASE]/sql_max_pool_size
#max_pool_size = 5

# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10

# Interval between retries of opening a SQL connection. (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10

# If set, use this value for max_overflow with SQLAlchemy. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = 50

# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Minimum value: 0
# Maximum value: 100
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0

# Add Python stack traces to SQL as comment strings. (boolean value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = false

# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>

# Enable the experimental use of database reconnect on connection lost. (boolean
# value)
#use_db_reconnect = false

# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1

# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true

# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10

# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20


[handler:neutron_floatingip]

#
# From designate.opts
#

# notification any events from neutron (list value)
#notification_topics = notifications

# control-exchange for neutron notification (string value)
#control_exchange = neutron

# Zone ID with each notification (string value)
#zone_id = <None>

# IPv4 format (multi valued)
#formatv4 =

# DEPRECATED: format which replaced by formatv4/formatv6 (multi valued)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by 'formatv4/formatv6'
#format =

# IPv6 format (multi valued)
#formatv6 =


[handler:nova_fixed]

#
# From designate.opts
#

# notification any events from nova (list value)
#notification_topics = notifications

# control-exchange for nova notification (string value)
#control_exchange = nova

# Zone ID with each notification (string value)
#zone_id = <None>

# IPv4 format (multi valued)
#formatv4 =

# DEPRECATED: format which replaced by formatv4/formatv6 (multi valued)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by 'formatv4/formatv6'
#format =

# IPv6 format (multi valued)
#formatv6 =


[healthcheck]

#
# From oslo.middleware
#

# DEPRECATED: The path to respond to healtcheck requests on. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#path = /healthcheck

# Show more detailed information as part of the response (boolean value)
#detailed = false

# Additional backends that can perform health checks and report that information
# back as part of a request. (list value)
#backends =

# Check the presence of a file to determine if an application is running on a
# port. Used by DisableByFileHealthcheck plugin. (string value)
#disable_by_file_path = <None>

# Check the presence of a file based on a port to determine if an application is
# running on a port. Expects a "port:path" list of strings. Used by
# DisableByFilesPortsHealthcheck plugin. (list value)
#disable_by_file_paths =


[heartbeat_emitter]

#
# From designate.opts
#

# Number of seconds between heartbeats for reporting state (floating point
# value)
#heartbeat_interval = 5.0

# Emitter to use (string value)
#emitter_type = rpc


[keystone_authtoken]

#
# From keystonemiddleware.auth_token
#

# Complete "public" Identity API endpoint. This endpoint should not be an
# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
# clients are redirected to this endpoint to authenticate. Although this
# endpoint should ideally be unversioned, client support in the wild varies. If
# you're using a versioned v2 endpoint here, then this should *not* be the same
# endpoint the service user utilizes for validating tokens, because normal end
# users may not be able to reach that endpoint. (string value)
#auth_uri = <None>

# API version of the admin Identity API endpoint. (string value)
#auth_version = <None>

# Do not handle authorization requests within the middleware, but delegate the
# authorization decision to downstream WSGI components. (boolean value)
#delay_auth_decision = false

# Request timeout value for communicating with Identity API server. (integer
# value)
#http_connect_timeout = <None>

# How many times are we trying to reconnect when communicating with Identity API
# Server. (integer value)
#http_request_max_retries = 3

# Request environment key where the Swift cache object is stored. When
# auth_token middleware is deployed with a Swift cache, use this option to have
# the middleware share a caching backend with swift. Otherwise, use the
# ``memcached_servers`` option instead. (string value)
#cache = <None>

# Required if identity server requires client certificate (string value)
#certfile = <None>

# Required if identity server requires client certificate (string value)
#keyfile = <None>

# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
# Defaults to system CAs. (string value)
#cafile = <None>

# Verify HTTPS connections. (boolean value)
#insecure = false

# The region in which the identity server can be found. (string value)
#region_name = <None>

# DEPRECATED: Directory used to cache files related to PKI tokens. This option
# has been deprecated in the Ocata release and will be removed in the P release.
# (string value)
# This option is deprecated for removal since Ocata.
# Its value may be silently ignored in the future.
# Reason: PKI token format is no longer supported.
#signing_dir = <None>

# Optionally specify a list of memcached server(s) to use for caching. If left
# undefined, tokens will instead be cached in-process. (list value)
# Deprecated group/name - [keystone_authtoken]/memcache_servers
#memcached_servers = <None>

# In order to prevent excessive effort spent validating tokens, the middleware
# caches previously-seen tokens for a configurable duration (in seconds). Set to
# -1 to disable caching completely. (integer value)
#token_cache_time = 300

# DEPRECATED: Determines the frequency at which the list of revoked tokens is
# retrieved from the Identity service (in seconds). A high number of revocation
# events combined with a low cache duration may significantly reduce
# performance. Only valid for PKI tokens. This option has been deprecated in the
# Ocata release and will be removed in the P release. (integer value)
# This option is deprecated for removal since Ocata.
# Its value may be silently ignored in the future.
# Reason: PKI token format is no longer supported.
#revocation_cache_time = 10

# (Optional) If defined, indicate whether token data should be authenticated or
# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
# cache. If the value is not one of these options or empty, auth_token will
# raise an exception on initialization. (string value)
# Allowed values: None, MAC, ENCRYPT
#memcache_security_strategy = None

# (Optional, mandatory if memcache_security_strategy is defined) This string is
# used for key derivation. (string value)
#memcache_secret_key = <None>

# (Optional) Number of seconds memcached server is considered dead before it is
# tried again. (integer value)
#memcache_pool_dead_retry = 300

# (Optional) Maximum total number of open connections to every memcached server.
# (integer value)
#memcache_pool_maxsize = 10

# (Optional) Socket timeout in seconds for communicating with a memcached
# server. (integer value)
#memcache_pool_socket_timeout = 3

# (Optional) Number of seconds a connection to memcached is held unused in the
# pool before it is closed. (integer value)
#memcache_pool_unused_timeout = 60

# (Optional) Number of seconds that an operation will wait to get a memcached
# client connection from the pool. (integer value)
#memcache_pool_conn_get_timeout = 10

# (Optional) Use the advanced (eventlet safe) memcached client pool. The
# advanced pool will only work under python 2.x. (boolean value)
#memcache_use_advanced_pool = false

# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
# middleware will not ask for service catalog on token validation and will not
# set the X-Service-Catalog header. (boolean value)
#include_service_catalog = true

# Used to control the use and type of token binding. Can be set to: "disabled"
# to not check token binding. "permissive" (default) to validate binding
# information if the bind type is of a form known to the server and ignore it if
# not. "strict" like "permissive" but if the bind type is unknown the token will
# be rejected. "required" any form of token binding is needed to be allowed.
# Finally the name of a binding method that must be present in tokens. (string
# value)
#enforce_token_bind = permissive

# DEPRECATED: If true, the revocation list will be checked for cached tokens.
# This requires that PKI tokens are configured on the identity server. (boolean
# value)
# This option is deprecated for removal since Ocata.
# Its value may be silently ignored in the future.
# Reason: PKI token format is no longer supported.
#check_revocations_for_cached = false

# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
# single algorithm or multiple. The algorithms are those supported by Python
# standard hashlib.new(). The hashes will be tried in the order given, so put
# the preferred one first for performance. The result of the first hash will be
# stored in the cache. This will typically be set to multiple values only while
# migrating from a less secure algorithm to a more secure one. Once all the old
# tokens are expired this option should be set to a single value for better
# performance. (list value)
# This option is deprecated for removal since Ocata.
# Its value may be silently ignored in the future.
# Reason: PKI token format is no longer supported.
#hash_algorithms = md5

# A choice of roles that must be present in a service token. Service tokens are
# allowed to request that an expired token can be used and so this check should
# tightly control that only actual services should be sending this token. Roles
# here are applied as an ANY check so any role in this list must be present. For
# backwards compatibility reasons this currently only affects the allow_expired
# check. (list value)
#service_token_roles = service

# For backwards compatibility reasons we must let valid service tokens pass that
# don't pass the service_token_roles check as valid. Setting this true will
# become the default in a future release and should be enabled if possible.
# (boolean value)
#service_token_roles_required = false

# Authentication type to load (string value)
# Deprecated group/name - [keystone_authtoken]/auth_plugin
#auth_type = <None>

# Config Section from which to load plugin specific options (string value)
#auth_section = <None>


[matchmaker_redis]

#
# From oslo.messaging
#

# DEPRECATED: Host to locate redis. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#host = 127.0.0.1

# DEPRECATED: Use this port to connect to redis host. (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#port = 6379

# DEPRECATED: Password for Redis server (optional). (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#password =

# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
# [host:port, host1:port ... ] (list value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#sentinel_hosts =

# Redis replica set name. (string value)
#sentinel_group_name = oslo-messaging-zeromq

# Time in ms to wait between connection attempts. (integer value)
#wait_timeout = 2000

# Time in ms to wait before the transaction is killed. (integer value)
#check_timeout = 20000

# Timeout in ms on blocking socket operations. (integer value)
#socket_timeout = 10000


[monasca:statsd]

#
# From designate.opts
#

# enable (boolean value)
#enabled = false

# UDP port (integer value)
#port = 8125

# hostname (string value)
#hostname = 127.0.0.1


[network_api:neutron]

#
# From designate.opts
#

# URL to use if None in the ServiceCatalog that is passed by the request
# context. Format: <region>|<url> (list value)
#endpoints = <None>

# Endpoint type to use (string value)
#endpoint_type = publicURL

# timeout value for connecting to neutron in seconds (integer value)
#timeout = 30

# username for connecting to neutron in admin context (string value)
#admin_username = <None>

# password for connecting to neutron in admin context (string value)
#admin_password = <None>

# tenant name for connecting to neutron in admin context (string value)
#admin_tenant_name = <None>

# auth url for connecting to neutron in admin context (string value)
#auth_url = <None>

# if set, ignore any SSL validation issues (boolean value)
#insecure = false

# auth strategy for connecting to neutron in admin context (string value)
#auth_strategy = keystone

# Location of ca certificates file to use for neutron client requests. (string
# value)
#ca_certificates_file = <None>


[oslo_concurrency]

#
# From oslo.concurrency
#

# Enables or disables inter-process locks. (boolean value)
#disable_process_locking = false

# Directory to use for lock files.  For security, the specified directory should
# only be writable by the user running the processes that need locking. Defaults
# to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
# path must be set. (string value)
#lock_path = $state_path


[oslo_messaging_amqp]

#
# From oslo.messaging
#

# Name for the AMQP container. must be globally unique. Defaults to a generated
# UUID (string value)
#container_name = <None>

# Timeout for inactive connections (in seconds) (integer value)
#idle_timeout = 0

# Debug: dump AMQP frames to stdout (boolean value)
#trace = false

# Attempt to connect via SSL. If no other ssl-related parameters are given, it
# will use the system's CA-bundle to verify the server's certificate. (boolean
# value)
#ssl = false

# CA certificate PEM file used to verify the server's certificate (string value)
#ssl_ca_file =

# Self-identifying certificate PEM file for client authentication (string value)
#ssl_cert_file =

# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
# value)
#ssl_key_file =

# Password for decrypting ssl_key_file (if encrypted) (string value)
#ssl_key_password = <None>

# By default SSL checks that the name in the server's certificate matches the
# hostname in the transport_url. In some configurations it may be preferable to
# use the virtual hostname instead, for example if the server uses the Server
# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
# virtual host name instead of the DNS name. (boolean value)
#ssl_verify_vhost = false

# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Not applicable - not a SSL server
#allow_insecure_clients = false

# Space separated list of acceptable SASL mechanisms (string value)
#sasl_mechanisms =

# Path to directory that contains the SASL configuration (string value)
#sasl_config_dir =

# Name of configuration file (without .conf suffix) (string value)
#sasl_config_name =

# SASL realm to use if no realm present in username (string value)
#sasl_default_realm =

# DEPRECATED: User name for message broker authentication (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Should use configuration option transport_url to provide the username.
#username =

# DEPRECATED: Password for message broker authentication (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Should use configuration option transport_url to provide the password.
#password =

# Seconds to pause before attempting to re-connect. (integer value)
# Minimum value: 1
#connection_retry_interval = 1

# Increase the connection_retry_interval by this many seconds after each
# unsuccessful failover attempt. (integer value)
# Minimum value: 0
#connection_retry_backoff = 2

# Maximum limit for connection_retry_interval + connection_retry_backoff
# (integer value)
# Minimum value: 1
#connection_retry_interval_max = 30

# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
# recoverable error. (integer value)
# Minimum value: 1
#link_retry_delay = 10

# The maximum number of attempts to re-send a reply message which failed due to
# a recoverable error. (integer value)
# Minimum value: -1
#default_reply_retry = 0

# The deadline for an rpc reply message delivery. (integer value)
# Minimum value: 5
#default_reply_timeout = 30

# The deadline for an rpc cast or call message delivery. Only used when caller
# does not provide a timeout expiry. (integer value)
# Minimum value: 5
#default_send_timeout = 30

# The deadline for a sent notification message delivery. Only used when caller
# does not provide a timeout expiry. (integer value)
# Minimum value: 5
#default_notify_timeout = 30

# The duration to schedule a purge of idle sender links. Detach link after
# expiry. (integer value)
# Minimum value: 1
#default_sender_link_timeout = 600

# Indicates the addressing mode used by the driver.
# Permitted values:
# 'legacy'   - use legacy non-routable addressing
# 'routable' - use routable addresses
# 'dynamic'  - use legacy addresses if the message bus does not support routing
# otherwise use routable addressing (string value)
#addressing_mode = dynamic

# Enable virtual host support for those message buses that do not natively
# support virtual hosting (such as qpidd). When set to true the virtual host
# name will be added to all message bus addresses, effectively creating a
# private 'subnet' per virtual host. Set to False if the message bus supports
# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
# as the name of the virtual host. (boolean value)
#pseudo_vhost = true

# address prefix used when sending to a specific server (string value)
#server_request_prefix = exclusive

# address prefix used when broadcasting to all servers (string value)
#broadcast_prefix = broadcast

# address prefix when sending to any server in group (string value)
#group_request_prefix = unicast

# Address prefix for all generated RPC addresses (string value)
#rpc_address_prefix = openstack.org/om/rpc

# Address prefix for all generated Notification addresses (string value)
#notify_address_prefix = openstack.org/om/notify

# Appended to the address prefix when sending a fanout message. Used by the
# message bus to identify fanout messages. (string value)
#multicast_address = multicast

# Appended to the address prefix when sending to a particular RPC/Notification
# server. Used by the message bus to identify messages sent to a single
# destination. (string value)
#unicast_address = unicast

# Appended to the address prefix when sending to a group of consumers. Used by
# the message bus to identify messages that should be delivered in a round-robin
# fashion across consumers. (string value)
#anycast_address = anycast

# Exchange name used in notification addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_notification_exchange if set
# else control_exchange if set
# else 'notify' (string value)
#default_notification_exchange = <None>

# Exchange name used in RPC addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_rpc_exchange if set
# else control_exchange if set
# else 'rpc' (string value)
#default_rpc_exchange = <None>

# Window size for incoming RPC Reply messages. (integer value)
# Minimum value: 1
#reply_link_credit = 200

# Window size for incoming RPC Request messages (integer value)
# Minimum value: 1
#rpc_server_credit = 100

# Window size for incoming Notification messages (integer value)
# Minimum value: 1
#notify_server_credit = 100

# Send messages of this type pre-settled.
# Pre-settled messages will not receive acknowledgement
# from the peer. Note well: pre-settled messages may be
# silently discarded if the delivery fails.
# Permitted values:
# 'rpc-call' - send RPC Calls pre-settled
# 'rpc-reply'- send RPC Replies pre-settled
# 'rpc-cast' - Send RPC Casts pre-settled
# 'notify'   - Send Notifications pre-settled
#  (multi valued)
#pre_settled = rpc-cast
#pre_settled = rpc-reply


[oslo_messaging_kafka]

#
# From oslo.messaging
#

# DEPRECATED: Default Kafka broker Host (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#kafka_default_host = localhost

# DEPRECATED: Default Kafka broker Port (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#kafka_default_port = 9092

# Max fetch bytes of Kafka consumer (integer value)
#kafka_max_fetch_bytes = 1048576

# Default timeout(s) for Kafka consumers (floating point value)
#kafka_consumer_timeout = 1.0

# Pool Size for Kafka Consumers (integer value)
#pool_size = 10

# The pool size limit for connections expiration policy (integer value)
#conn_pool_min_size = 2

# The time-to-live in sec of idle connections in the pool (integer value)
#conn_pool_ttl = 1200

# Group id for Kafka consumer. Consumers in one group will coordinate message
# consumption (string value)
#consumer_group = oslo_messaging_consumer

# Upper bound on the delay for KafkaProducer batching in seconds (floating point
# value)
#producer_batch_timeout = 0.0

# Size of batch for the producer async send (integer value)
#producer_batch_size = 16384


[oslo_messaging_notifications]

#
# From oslo.messaging
#

# The Drivers(s) to handle sending notifications. Possible values are messaging,
# messagingv2, routing, log, test, noop (multi valued)
# Deprecated group/name - [DEFAULT]/notification_driver
#driver =

# A URL representing the messaging driver to use for notifications. If not set,
# we fall back to the same configuration used for RPC. (string value)
# Deprecated group/name - [DEFAULT]/notification_transport_url
#transport_url = <None>

# AMQP topic used for OpenStack notifications. (list value)
# Deprecated group/name - [rpc_notifier2]/topics
# Deprecated group/name - [DEFAULT]/notification_topics
#topics = notifications

# The maximum number of attempts to re-send a notification message which failed
# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
# (integer value)
#retry = -1


[oslo_messaging_rabbit]

#
# From oslo.messaging
#

# Use durable queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_durable_queues
# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
#amqp_durable_queues = false

# Auto-delete queues in AMQP. (boolean value)
#amqp_auto_delete = false

# Enable SSL (boolean value)
#ssl = <None>

# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
#ssl_version =

# SSL key file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
#ssl_key_file =

# SSL cert file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
#ssl_cert_file =

# SSL certification authority file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
#ssl_ca_file =

# How long to wait before reconnecting in response to an AMQP consumer cancel
# notification. (floating point value)
#kombu_reconnect_delay = 1.0

# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
# be used. This option may not be available in future versions. (string value)
#kombu_compression = <None>

# How long to wait a missing client before abandoning to send it its replies.
# This value should not be longer than rpc_response_timeout. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60

# Determines how the next RabbitMQ node is chosen in case the one we are
# currently connected to becomes unavailable. Takes effect only if more than one
# RabbitMQ node is provided in config. (string value)
# Allowed values: round-robin, shuffle
#kombu_failover_strategy = round-robin

# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_host = localhost

# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_port = 5672

# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_hosts = $rabbit_host:$rabbit_port

# DEPRECATED: The RabbitMQ userid. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_userid = guest

# DEPRECATED: The RabbitMQ password. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_password = guest

# The RabbitMQ login method. (string value)
# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
#rabbit_login_method = AMQPLAIN

# DEPRECATED: The RabbitMQ virtual host. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_virtual_host = /

# How frequently to retry connecting with RabbitMQ. (integer value)
#rabbit_retry_interval = 1

# How long to backoff for between retries when connecting to RabbitMQ. (integer
# value)
#rabbit_retry_backoff = 2

# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
# (integer value)
#rabbit_interval_max = 30

# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
# (infinite retry count). (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#rabbit_max_retries = 0

# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
# is no longer controlled by the x-ha-policy argument when declaring a queue. If
# you just want to make sure that all queues (except those with auto-generated
# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
#rabbit_ha_queues = false

# Positive integer representing duration in seconds for queue TTL (x-expires).
# Queues which are unused for the duration of the TTL are automatically deleted.
# The parameter affects only reply and fanout queues. (integer value)
# Minimum value: 1
#rabbit_transient_queues_ttl = 1800

# Specifies the number of messages to prefetch. Setting to zero allows unlimited
# messages. (integer value)
#rabbit_qos_prefetch_count = 0

# Number of seconds after which the Rabbit broker is considered down if
# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
# value)
#heartbeat_timeout_threshold = 60

# How often times during the heartbeat_timeout_threshold we check the heartbeat.
# (integer value)
#heartbeat_rate = 2

# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
#fake_rabbit = false

# Maximum number of channels to allow (integer value)
#channel_max = <None>

# The maximum byte size for an AMQP frame (integer value)
#frame_max = <None>

# How often to send heartbeats for consumer's connections (integer value)
#heartbeat_interval = 3

# Arguments passed to ssl.wrap_socket (dict value)
#ssl_options = <None>

# Set socket timeout in seconds for connection's socket (floating point value)
#socket_timeout = 0.25

# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point value)
#tcp_user_timeout = 0.25

# Set delay for reconnection to some host which has connection error (floating
# point value)
#host_connection_reconnect_delay = 0.25

# Connection factory implementation (string value)
# Allowed values: new, single, read_write
#connection_factory = single

# Maximum number of connections to keep queued. (integer value)
#pool_max_size = 30

# Maximum number of connections to create above `pool_max_size`. (integer value)
#pool_max_overflow = 0

# Default number of seconds to wait for a connections to available (integer
# value)
#pool_timeout = 30

# Lifetime of a connection (since creation) in seconds or None for no recycling.
# Expired connections are closed on acquire. (integer value)
#pool_recycle = 600

# Threshold at which inactive (since release) connections are considered stale
# in seconds or None for no staleness. Stale connections are closed on acquire.
# (integer value)
#pool_stale = 60

# Default serialization mechanism for serializing/deserializing
# outgoing/incoming messages (string value)
# Allowed values: json, msgpack
#default_serializer_type = json

# Persist notification messages. (boolean value)
#notification_persistence = false

# Exchange name for sending notifications (string value)
#default_notification_exchange = ${control_exchange}_notification

# Max number of not acknowledged message which RabbitMQ can send to notification
# listener. (integer value)
#notification_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending
# notification, -1 means infinite retry. (integer value)
#default_notification_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending
# notification message (floating point value)
#notification_retry_delay = 0.25

# Time to live for rpc queues without consumers in seconds. (integer value)
#rpc_queue_expiration = 60

# Exchange name for sending RPC messages (string value)
#default_rpc_exchange = ${control_exchange}_rpc

# Exchange name for receiving RPC replies (string value)
#rpc_reply_exchange = ${control_exchange}_rpc_reply

# Max number of not acknowledged message which RabbitMQ can send to rpc
# listener. (integer value)
#rpc_listener_prefetch_count = 100

# Max number of not acknowledged message which RabbitMQ can send to rpc reply
# listener. (integer value)
#rpc_reply_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending reply.
# -1 means infinite retry during rpc_timeout (integer value)
#rpc_reply_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending reply.
# (floating point value)
#rpc_reply_retry_delay = 0.25

# Reconnecting retry count in case of connectivity problem during sending RPC
# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
# request could be processed more than one time (integer value)
#default_rpc_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending RPC
# message (floating point value)
#rpc_retry_delay = 0.25


[oslo_messaging_zmq]

#
# From oslo.messaging
#

# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
# The "host" option should point or resolve to this address. (string value)
#rpc_zmq_bind_address = *

# MatchMaker driver. (string value)
# Allowed values: redis, sentinel, dummy
#rpc_zmq_matchmaker = redis

# Number of ZeroMQ contexts, defaults to 1. (integer value)
#rpc_zmq_contexts = 1

# Maximum number of ingress messages to locally buffer per topic. Default is
# unlimited. (integer value)
#rpc_zmq_topic_backlog = <None>

# Directory for holding IPC sockets. (string value)
#rpc_zmq_ipc_dir = /var/run/openstack

# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
# "host" option, if running Nova. (string value)
#rpc_zmq_host = localhost

# Number of seconds to wait before all pending messages will be sent after
# closing a socket. The default value of -1 specifies an infinite linger period.
# The value of 0 specifies no linger period. Pending messages shall be discarded
# immediately when the socket is closed. Positive values specify an upper bound
# for the linger period. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
#zmq_linger = -1

# The default number of seconds that poll should wait. Poll raises timeout
# exception when timeout expired. (integer value)
#rpc_poll_timeout = 1

# Expiration timeout in seconds of a name service record about existing target (
# < 0 means no timeout). (integer value)
#zmq_target_expire = 300

# Update period in seconds of a name service record about existing target.
# (integer value)
#zmq_target_update = 180

# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
# value)
#use_pub_sub = false

# Use ROUTER remote proxy. (boolean value)
#use_router_proxy = false

# This option makes direct connections dynamic or static. It makes sense only
# with use_router_proxy=False which means to use direct connections for direct
# message types (ignored otherwise). (boolean value)
#use_dynamic_connections = false

# How many additional connections to a host will be made for failover reasons.
# This option is actual only in dynamic connections mode. (integer value)
#zmq_failover_connections = 2

# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
#rpc_zmq_min_port = 49153

# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
#rpc_zmq_max_port = 65536

# Number of retries to find free port number before fail with ZMQBindError.
# (integer value)
#rpc_zmq_bind_port_retries = 100

# Default serialization mechanism for serializing/deserializing
# outgoing/incoming messages (string value)
# Allowed values: json, msgpack
#rpc_zmq_serialization = json

# This option configures round-robin mode in zmq socket. True means not keeping
# a queue when server side disconnects. False means to keep queue and messages
# even if server is disconnected, when the server appears we send all
# accumulated messages to it. (boolean value)
#zmq_immediate = true

# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
# other negative value) means to skip any overrides and leave it to OS default;
# 0 and 1 (or any other positive value) mean to disable and enable the option
# respectively. (integer value)
#zmq_tcp_keepalive = -1

# The duration between two keepalive transmissions in idle condition. The unit
# is platform dependent, for example, seconds in Linux, milliseconds in Windows
# etc. The default value of -1 (or any other negative value and 0) means to skip
# any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_idle = -1

# The number of retransmissions to be carried out before declaring that remote
# end is not available. The default value of -1 (or any other negative value and
# 0) means to skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_cnt = -1

# The duration between two successive keepalive retransmissions, if
# acknowledgement to the previous keepalive transmission is not received. The
# unit is platform dependent, for example, seconds in Linux, milliseconds in
# Windows etc. The default value of -1 (or any other negative value and 0) means
# to skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_intvl = -1

# Maximum number of (green) threads to work concurrently. (integer value)
#rpc_thread_pool_size = 100

# Expiration timeout in seconds of a sent/received message after which it is not
# tracked anymore by a client/server. (integer value)
#rpc_message_ttl = 300

# Wait for message acknowledgements from receivers. This mechanism works only
# via proxy without PUB/SUB. (boolean value)
#rpc_use_acks = false

# Number of seconds to wait for an ack from a cast/call. After each retry
# attempt this timeout is multiplied by some specified multiplier. (integer
# value)
#rpc_ack_timeout_base = 15

# Number to multiply base ack timeout by after each retry attempt. (integer
# value)
#rpc_ack_timeout_multiplier = 2

# Default number of message sending attempts in case of any problems occurred:
# positive value N means at most N retries, 0 means no retries, None or -1 (or
# any other negative values) mean to retry forever. This option is used only if
# acknowledgments are enabled. (integer value)
#rpc_retry_attempts = 3

# List of publisher hosts SubConsumer can subscribe on. This option has higher
# priority then the default publishers list taken from the matchmaker. (list
# value)
#subscribe_on =


[oslo_middleware]

#
# From oslo.middleware
#

# The maximum body size for each  request, in bytes. (integer value)
# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
# Deprecated group/name - [DEFAULT]/max_request_body_size
#max_request_body_size = 114688

# DEPRECATED: The HTTP Header that will be used to determine what the original
# request protocol scheme was, even if it was hidden by a SSL termination proxy.
# (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#secure_proxy_ssl_header = X-Forwarded-Proto

# Whether the application is behind a proxy or not. This determines if the
# middleware should parse the headers or not. (boolean value)
#enable_proxy_headers_parsing = false


[oslo_policy]

#
# From oslo.policy
#

# The file that defines policies. (string value)
#policy_file = policy.json

# Default rule. Enforced when a requested rule is not found. (string value)
#policy_default_rule = default

# Directories where policy configuration files are stored. They can be relative
# to any directory in the search path defined by the config_dir option, or
# absolute paths. The file defined by policy_file must exist for these
# directories to be searched.  Missing or empty directories are ignored. (multi
# valued)
#policy_dirs = policy.d


[pool_manager_cache:memcache]

#
# From designate.opts
#

# Time in seconds to expire cache. (integer value)
#expiration = 3600

# Memcached servers or None for in process cache. (list value)
#memcached_servers = <None>


[pool_manager_cache:sqlalchemy]

#
# From designate.opts
#

# If True, SQLite uses synchronous mode. (boolean value)
#sqlite_synchronous = true

# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy

# The SQLAlchemy connection string to use to connect to the database. (string
# value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>

# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>

# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
# the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL

# If True, transparently enables support for handling MySQL Cluster (NDB).
# (boolean value)
#mysql_enable_ndb = false

# Timeout before idle SQL connections are reaped. (integer value)
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
# Deprecated group/name - [DATABASE]/sql_idle_timeout
# Deprecated group/name - [sql]/idle_timeout
#idle_timeout = 3600

# Minimum number of SQL connections to keep open in a pool. (integer value)
# Deprecated group/name - [DEFAULT]/sql_min_pool_size
# Deprecated group/name - [DATABASE]/sql_min_pool_size
#min_pool_size = 1

# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
# indicates no limit. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
# Deprecated group/name - [DATABASE]/sql_max_pool_size
#max_pool_size = 5

# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10

# Interval between retries of opening a SQL connection. (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10

# If set, use this value for max_overflow with SQLAlchemy. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = 50

# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Minimum value: 0
# Maximum value: 100
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0

# Add Python stack traces to SQL as comment strings. (boolean value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = false

# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>

# Enable the experimental use of database reconnect on connection lost. (boolean
# value)
#use_db_reconnect = false

# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1

# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true

# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10

# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20


[producer_task:delayed_notify]

#
# From designate.producer
#

# Run interval in seconds (integer value)
#interval = 5

# Default amount of results returned per page (integer value)
#per_page = 100

# How many zones to receive NOTIFY on each run (integer value)
#batch_size = 100


[producer_task:periodic_exists]

#
# From designate.producer
#

# Run interval in seconds (integer value)
#interval = 3600

# Default amount of results returned per page (integer value)
#per_page = 100


[producer_task:periodic_secondary_refresh]

#
# From designate.producer
#

# Run interval in seconds (integer value)
#interval = 3600

# Default amount of results returned per page (integer value)
#per_page = 100


[producer_task:worker_periodic_recovery]

#
# From designate.producer
#

# Run interval in seconds (integer value)
#interval = 120

# Default amount of results returned per page (integer value)
#per_page = 100


[producer_task:zone_purge]

#
# From designate.producer
#

# Run interval in seconds (integer value)
#interval = 3600

# Default amount of results returned per page (integer value)
#per_page = 100

# How old deleted zones should be (deleted_at) to be purged, in seconds (integer
# value)
#time_threshold = 604800

# How many zones to be purged on each run (integer value)
#batch_size = 100


[proxy]

#
# From designate.opts
#

# Proxy HTTP requests via this proxy. (string value)
#http_proxy = <None>

# Proxy HTTPS requests via this proxy (string value)
#https_proxy = <None>

# These addresses should not be proxied (list value)
#no_proxy =


[service:agent]

#
# From designate.agent
#

# Number of agent worker processes to spawn (integer value)
#workers = <None>

# Number of agent greenthreads to spawn (integer value)
#threads = 1000

# DEPRECATED: Agent Bind Host (IP address value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by 'listen' option
#host = <None>

# DEPRECATED: Agent Port Number (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by 'listen' option
#port = <None>

# Agent host:port pairs to listen on (list value)
#listen = 0.0.0.0:5358

# The Agent TCP Backlog (integer value)
#tcp_backlog = 100

# Agent TCP Receive Timeout (floating point value)
#tcp_recv_timeout = 0.5

# List of IP addresses allowed to NOTIFY The Agent (list value)
#allow_notify =

# List of masters for the Agent, format ip:port (list value)
#masters =

# The backend driver to use, e.g. bind9, djbdns, knot2 (string value)
#backend_driver = bind9

# An IP address to be used to fetch zones transferred in (string value)
#transfer_source = <None>

# Delay after a NOTIFY arrives for a zone that the Agent will pause and drop
# subsequent NOTIFYs for that zone (floating point value)
#notify_delay = 0.0


[service:api]

#
# From designate.api
#

# Number of api worker processes to spawn (integer value)
#workers = <None>

# Number of api greenthreads to spawn (integer value)
#threads = 1000

# Enable host request headers (boolean value)
#enable_host_header = false

# the url used as the base for all API responses,This should consist of the
# scheme (http/https),the hostname, port, and any paths that are addedto the
# base of Designate is URLs,For example http://dns.openstack.example.com/dns
# (string value)
#api_base_uri = http://127.0.0.1:9001/

# DEPRECATED: API Bind Host (IP address value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by 'listen' option
#api_host = <None>

# DEPRECATED: API Port Number (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by 'listen' option
#api_port = <None>

# API host:port pairs to listen on (list value)
#listen = 0.0.0.0:9001

# File name for the paste.deploy config for designate-api (string value)
#api_paste_config = api-paste.ini

# The strategy to use for auth. Supports noauth or keystone (string value)
#auth_strategy = keystone

# DEPRECATED: enable-api-v1 which removed in a future (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: V1 API is being removed in a futurerelease
#enable_api_v1 = false

# enable-api-v2 which enable in a future (boolean value)
#enable_api_v2 = true

# enable-api-admin (boolean value)
#enable_api_admin = false

# Maximum line size of message headers to be accepted. max_header_line may need
# to be increased when using large tokens (typically those generated by the
# Keystone v3 API with big service catalogs). (integer value)
#max_header_line = 16384

# Enabled API Extensions (list value)
#enabled_extensions_v1 =

# Enabled API Extensions for the V2 API (list value)
#enabled_extensions_v2 =

# Default per-page limit for the V2 API, a value of None means show all results
# by default (integer value)
#default_limit_v2 = 20

# Max per-page limit for the V2 API (integer value)
#max_limit_v2 = 1000

# Enabled Admin API Extensions (list value)
#enabled_extensions_admin =

# Default per-page limit for the Admin API, a value of None means show all
# results by default (integer value)
#default_limit_admin = 20

# Max per-page limit for the Admin API (integer value)
#max_limit_admin = 1000

# Enable API Maintenance Mode (boolean value)
#maintenance_mode = false

# Role allowed to bypass maintaince mode (string value)
#maintenance_mode_role = admin

# The HTTP Header that will be used to determine which the original request
# protocol scheme was, even if it was removed by an SSL terminating proxy.
# (string value)
#secure_proxy_ssl_header = X-Forwarded-Proto

# A scheme that will be used to override the request protocol scheme, even if it
# was set by an SSL terminating proxy. (string value)
#override_proto = <None>


[service:central]

#
# From designate.central
#

# Number of central worker processes to spawn (integer value)
#workers = <None>

# Number of central greenthreads to spawn (integer value)
#threads = 1000

# The storage driver to use (string value)
#storage_driver = sqlalchemy

# Enabled Notification Handlers (list value)
#enabled_notification_handlers =

# Maximum zone name length (integer value)
#max_zone_name_len = 255

# Maximum recordset name length (integer value)
# Deprecated group/name - [service:central]/max_record_name_len
#max_recordset_name_len = 255

# E-Mail for Managed resources (string value)
#managed_resource_email = hostmaster@example.com

# The Tenant ID that will own any managed resources. (string value)
#managed_resource_tenant_id = 00000000-0000-0000-0000-000000000000

# Minimum TTL allowed (integer value)
#min_ttl = <None>

# The name of the default pool (string value)
#default_pool_id = 794ccc2c-d751-44fe-b57f-8894c9f5c842

# RPC topic name of central service. (string value)
#central_topic = central

#
# From designate.opts
#

# Enabled Pool Scheduling filters (list value)
#scheduler_filters = default_pool


[service:mdns]

#
# From designate.mdns
#

# Number of mdns worker processes to spawn (integer value)
#workers = <None>

# Number of mdns greenthreads to spawn (integer value)
#threads = 1000

# DEPRECATED: mDNS Bind Host (IP address value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by 'listen' option
#host = <None>

# DEPRECATED: mDNS Port Number (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by 'listen' option
#port = <None>

# mDNS host:port pairs to listen on (list value)
#listen = 0.0.0.0:5354

# mDNS TCP Backlog (integer value)
#tcp_backlog = 100

# mDNS TCP Receive Timeout (floating point value)
#tcp_recv_timeout = 0.5

# Send all traffic over TCP (boolean value)
#all_tcp = false

# Enforce all incoming queries (including AXFR) are TSIG signed (boolean value)
#query_enforce_tsig = false

# The storage driver to use (string value)
#storage_driver = sqlalchemy

# Maximum message size to emit (integer value)
#max_message_size = 65535

# RPC topic name for mini-DNS (string value)
#mdns_topic = mdns


[service:pool_manager]

#
# From designate.pool_manager
#

# Number of Pool Manager worker processes to spawn (integer value)
#workers = <None>

# Number of Pool Manager greenthreads to spawn (integer value)
#threads = 1000

# The ID of the pool managed by this instance of the Pool Manager (string value)
#pool_id = 794ccc2c-d751-44fe-b57f-8894c9f5c842

# DEPRECATED: The percentage of servers requiring a successful update for a zone
# change to be considered active (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#threshold_percentage = 100

# DEPRECATED: The time to wait for a response from a server (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#poll_timeout = 30

# DEPRECATED: The time between retrying to send a request and waiting for a
# response from a server (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#poll_retry_interval = 15

# DEPRECATED: The maximum number of times to retry sending a request and wait
# for a response from a server (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#poll_max_retries = 10

# DEPRECATED: The time to wait before sending the first request to a server
# (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#poll_delay = 5

# The flag for the recovery timer (boolean value)
#enable_recovery_timer = true

# The time between recovering from failures (integer value)
#periodic_recovery_interval = 120

# The flag for the sync timer (boolean value)
#enable_sync_timer = true

# The time between synchronizing the servers with storage (integer value)
#periodic_sync_interval = 1800

# Zones Updated within last N seconds will be syncd.Use an empty value to sync
# all zones. (integer value)
#periodic_sync_seconds = 21600

# Number of attempts to update a zone during sync (integer value)
#periodic_sync_max_attempts = 3

# Interval between zone update attempts during sync (integer value)
#periodic_sync_retry_interval = 30

# The cache driver to use (string value)
#cache_driver = memcache

# RPC topic name for pool-manager (string value)
#pool_manager_topic = pool_manager


[service:producer]

#
# From designate.producer
#

# Number of Producer worker processes to spawn (integer value)
#workers = <None>

# Number of Producer greenthreads to spawn (integer value)
#threads = 1000

# Enabled tasks to run (list value)
#enabled_tasks = <None>

# The storage driver to use (string value)
#storage_driver = sqlalchemy

# DEPRECATED: Whether to allow synchronous zone exports (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#export_synchronous = true


[service:sink]

#
# From designate.sink
#

# Number of sink worker processes to spawn (integer value)
#workers = <None>

# Number of sink greenthreads to spawn (integer value)
#threads = 1000

# Enabled Notification Handlers (list value)
#enabled_notification_handlers =


[service:worker]

#
# From designate.worker
#

# DEPRECATED: Whether to send events to worker instead of Pool Manager (boolean
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: In Newton, this option will disappearbecause worker will be enabled by
# default
#enabled = false

# Number of Worker worker processes to spawn (integer value)
#workers = <None>

# Number of Worker threads to spawn per process (integer value)
#threads = 200

# The storage driver to use (string value)
#storage_driver = sqlalchemy

# The percentage of servers requiring a successful update for a domain change to
# be considered active (integer value)
#threshold_percentage = 100

# The time to wait for a response from a server (integer value)
#poll_timeout = 30

# The time between retrying to send a request and waiting for a response from a
# server (integer value)
#poll_retry_interval = 15

# The maximum number of times to retry sending a request and wait for a response
# from a server (integer value)
#poll_max_retries = 10

# The time to wait before sending the first request to a server (integer value)
#poll_delay = 5

# Whether to allow worker to send NOTIFYs, this will noop NOTIFYs in mdns if
# true (boolean value)
#notify = true

# Whether to allow synchronous zone exports (boolean value)
#export_synchronous = true

# RPC topic for worker component (string value)
#worker_topic = worker


[service:zone_manager]

#
# From designate.producer
#

# DEPRECATED: Number of Zone Manager worker processes to spawn (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#workers = <None>

# DEPRECATED: Number of Zone Manager greenthreads to spawn (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#threads = 1000

# DEPRECATED: Enabled tasks to run (list value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#enabled_tasks = <None>

# DEPRECATED: The storage driver to use (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#storage_driver = sqlalchemy

# DEPRECATED: Whether to allow synchronous zone exports (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Migrated to designate-worker
#export_synchronous = true


[ssl]

#
# From oslo.service.sslutils
#

# CA certificate file to use to verify connecting clients. (string value)
# Deprecated group/name - [DEFAULT]/ssl_ca_file
#ca_file = <None>

# Certificate file to use when starting the server securely. (string value)
# Deprecated group/name - [DEFAULT]/ssl_cert_file
#cert_file = <None>

# Private key file to use when starting the server securely. (string value)
# Deprecated group/name - [DEFAULT]/ssl_key_file
#key_file = <None>

# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
#version = <None>

# Sets the list of available ciphers. value should be a string in the OpenSSL
# cipher list format. (string value)
#ciphers = <None>


[storage:sqlalchemy]

#
# From designate.opts
#

# If True, SQLite uses synchronous mode. (boolean value)
#sqlite_synchronous = true

# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy

# The SQLAlchemy connection string to use to connect to the database. (string
# value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>

# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>

# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
# the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL

# If True, transparently enables support for handling MySQL Cluster (NDB).
# (boolean value)
#mysql_enable_ndb = false

# Timeout before idle SQL connections are reaped. (integer value)
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
# Deprecated group/name - [DATABASE]/sql_idle_timeout
# Deprecated group/name - [sql]/idle_timeout
#idle_timeout = 3600

# Minimum number of SQL connections to keep open in a pool. (integer value)
# Deprecated group/name - [DEFAULT]/sql_min_pool_size
# Deprecated group/name - [DATABASE]/sql_min_pool_size
#min_pool_size = 1

# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
# indicates no limit. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
# Deprecated group/name - [DATABASE]/sql_max_pool_size
#max_pool_size = 5

# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10

# Interval between retries of opening a SQL connection. (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10

# If set, use this value for max_overflow with SQLAlchemy. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = 50

# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Minimum value: 0
# Maximum value: 100
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0

# Add Python stack traces to SQL as comment strings. (boolean value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = false

# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>

# Enable the experimental use of database reconnect on connection lost. (boolean
# value)
#use_db_reconnect = false

# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1

# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true

# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10

# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.