Install and configure for Red Hat Enterprise Linux and CentOS

This section describes how to install and configure the Backup service for Red Hat Enterprise Linux 7 and CentOS 7.

Prerequisites

  1. Source the admin credentials to gain access to admin-only CLI commands:

    $ . admin-openrc
    
  2. To create the service credentials, complete these steps:

    • Create the freezer user:

      $ openstack user create --domain default --password-prompt freezer
      
    • Add the admin role to the freezer user:

      $ openstack role add --project service --user freezer admin
      
    • Create the freezer service entities:

      $ openstack service create --name freezer --description "Backup" backup
      
  3. Create the Backup service API endpoints:

    $ openstack endpoint create --region RegionOne \
      backup public http://controller:9090/
    $ openstack endpoint create --region RegionOne \
      backup internal http://controller:9090/
    $ openstack endpoint create --region RegionOne \
      backup admin http://controller:9090/
    

Install and configure components

  1. Install the packages:

    $ sudo yum install python-dev python-pip
    
  1. Copy the configuration files to /etc/freezer/:

    sudo cp etc/freezer/freezer-api.conf.sample /etc/freezer/freezer-api.conf
    sudo cp etc/freezer/freezer-paste.ini /etc/freezer/freezer-paste.ini
    
  2. Edit the /etc/freezer/freezer-api.conf file and complete the following actions:

    There are two kinds of api interface, v1 and v2.

    There are two kinds of database drivers, elasticsearch and Sqlalchemy.

    There are four kinds of combinations between api interface and database drivers:

    configuration

    freezer api

    database driver

    configuration1

    v1

    elasticsearch

    configuration2

    v2

    elasticsearch

    configuration3

    v1

    sqlalchemy

    configuration4

    v2

    sqlalchemy

    notes:

    Default configuration is freezer api v2 and elasticsearch.

    Configuration1: api v1 interface and elasticsearch:

    • In the [DEFAULT] section, configure api interface type:

      [DEFAULT]
      ...
      enable_v1_api = True
      
    • In the [storage] section, configure database access:

      [storage]
      ...
      backend = elasticsearch
      driver = elasticsearch
      
    • In the [elasticsearch] section, configure elasticsearch access: You might need to create the elasticsearch section first.

      [elasticsearch]
      ...
      hosts=http://localhost:9200
      index=freezer
      use_ssl=False
      ca_certs=''
      use_ssl=False
      timeout=60
      retries=20
      number_of_replicas = 1
      

    Configuration2: api v2 interface and elasticsearch:

    • In the [DEFAULT] section, configure api interface type:

      [DEFAULT]
      ...
      #enable_v1_api = True
      
    • In the [storage] section, configure database access:

      [storage]
      ...
      backend = elasticsearch
      driver = elasticsearch
      
    • In the [elasticsearch] section, configure elasticsearch access: You might need to create the elasticsearch section first.

      [elasticsearch]
      ...
      hosts=http://localhost:9200
      index=freezer
      use_ssl=False
      ca_certs=''
      timeout=60
      retries=20
      number_of_replicas = 1
      

    Configuration3: api v1 interface and sqlalchemy:

    • In the [DEFAULT] section, configure api interface type:

      [DEFAULT]
      ...
      enable_v1_api = True
      
    • In the [storage] section, configure database access:

      [storage]
      ...
      backend = sqlalchemy
      driver = sqlalchemy
      
    • In the [database] section, configure sqlalchemy access:

      You might need to create the database section first.

      [database]
      ...
      connection = mysql+pymysql://root:stack@127.0.0.1/freezer?charset=utf8
      

    Configuration4: api v2 interface and sqlalchemy:

    • In the [DEFAULT] section, configure api interface type:

      [DEFAULT]
      ...
      #enable_v1_api = True
      
    • In the [storage] section, configure database access:

      [storage]
      ...
      backend = sqlalchemy
      driver = sqlalchemy
      
    • In the [database] section, configure sqlalchemy access: You might need to create the database section first.

      [database]
      ...
      connection = mysql+pymysql://root:stack@127.0.0.1/freezer?charset=utf8
      
    • Currently, Freezer API v2 is enabled and used by default. If you want to use Freezer API v1 instead, manually activate it in the [DEFAULT] section:

    [DEFAULT]
    ...
    enable_v1_api=True
    

Start elasticsearch

The currently supported db is Elasticsearch. In case you are using a dedicated instance of the server, you’ll need to start it. Depending on the OS flavor it might be:

# service elasticsearch start

or, on systemd

# systemctl start elasticsearch

Using freezer-manage

Elasticsearch needs to know what type of data each document’s field contains. This information is contained in the mapping, or schema definition. Elasticsearch will use dynamic mapping to try to guess the field type from the basic datatypes available in JSON, but some field’s properties have to be explicitly declared to tune the indexing engine. To do that, use the freezer-manage command:

# freezer-manage db sync

You should have updated your configuration files before doing this step. freezer-manage has the following options:

  • To create the db mappings use the following command

    # freezer-manage db sync
    
  • To update the db mappings using the following command. Update means that you might have some mappings and you want to update it with a more recent ones

    # freezer-manage db update
    
  • To remove the db mappings using the following command

    # freezer-manage db remove
    
  • To print the db mappings using the following command

    # freezer-manage db show
    
  • To update your settings (number of replicas) all what you need to do is to change its value in the configuration file and then run the following command

    # freezer-manage db update-settings
    

If you provided an invalid number of replicas that will cause problems later on, so it’s highly recommended to make sure that you are using the correct number of replicas. For more info click here Elasticsearch_Replicas_instructions

  • To get information about optional additional parameters

# freezer-manage -h
  • If you want to add any additional parameter like –yes or –erase, they should be before the db option. Check the following examples Wrong Example

# freezer-manage db sync -y -e

Correct Example:

# freezer-manage -y -e db sync

create the mappings

# freezer-manage -y -e db sync

run simple instance

$ freezer-api --config-file /etc/freezer/freezer-api.conf

examples running using uwsgi

$ uwsgi --http :9090 --need-app --master --module freezer_api.cmd.wsgi:application

$ uwsgi --https :9090,foobar.crt,foobar.key --need-app --master --module freezer_api.cmd.wsgi:application

example running freezer-api with apache2

sudo vi /etc/apache2/sites-enabled/freezer-api.conf

<VirtualHost ...>
    WSGIDaemonProcess freezer-api processes=2 threads=2 user=freezer display-name=%{GROUP}
    WSGIProcessGroup freezer-api
    WSGIApplicationGroup freezer-api
    WSGIScriptAlias / /opt/stack/freezer_api/cmd/wsgi.py

    <IfVersion >= 2.4>
      ErrorLogFormat "%M"
    </IfVersion>
    ErrorLog /var/log/%APACHE_NAME%/freezer-api.log
    LogLevel warn
    CustomLog /var/log/freezer-api/freezer-api_access.log combined

    <Directory /opt/stack/freezer_api>
      Options Indexes FollowSymLinks MultiViews
      Require all granted
      AllowOverride None
      Order allow,deny
      allow from all
      LimitRequestBody 102400
    </Directory>
</VirtualHost>

Install and configure freezer-scheduler/agent

This section describes how to install and configure freezer-scheduler and freezer-agent, on any node in the cloud or any vm inside the cloud.

This section assumes that you already have a working OpenStack environment with at least the following components installed: - Keystone - Swift

git clone https://git.openstack.org/openstack/freezer.git
cd freezer
pip install ./

Configure the scheduler

  1. Copy the configuration files to /etc/freezer/:

$ sudo cp etc/scheduler.conf.sample /etc/freezer/scheduler.conf
  1. Edit the /etc/freezer/scheduler.conf file and complete the following actions:

    There are two kinds of api interface, v1 and v2.

    There are two kinds of configurations:

    notes:

    Default configuration is freezer api v2.

    Configuration1: freezer-api is started by v1 interface:

    • In the [DEFAULT] section, configure database access:

      The client_id has to be set to the hostname of the machine. It will be used as an identifier for this node to fetch its scheduled backups

      [DEFAULT]
      ...
      client_id = hostname_of_machine
      jobs_dir = /etc/freezer/scheduler/conf.d
      enable_v1_api = True
      

    Configuration2: freezer-api is started by v2 interface:

    • In the [DEFAULT] section, configure database access:

      The client_id has to be set to the hostname of the machine. It will be used as an identifier for this node to fetch its scheduled backups

      [DEFAULT]
      ...
      client_id = hostname_of_machine
      jobs_dir = /etc/freezer/scheduler/conf.d
      #enable_v1_api = False
      
  2. Start freezer-scheduler

$ . admin-openrc
$ sudo freezer-scheduler --config-file /etc/freezer/scheduler.conf start

Finalize installation

Start the Backup services and configure them to start when the system boots:

$ sudo systemctl enable openstack-freezer-api.service

$ sudo systemctl start openstack-freezer-api.service