Install and configure (Debian)

Install and configure (Debian)

This section describes how to install and configure the Image service, code-named glance, on the controller node. For simplicity, this configuration stores images on the local file system.

Prerequisites

Before you install and configure the Image service, you must create a database, service credentials, and API endpoints.

  1. To create the database, complete these steps:

    • Use the database access client to connect to the database server as the root user:

      $ mysql -u root -p
      
    • Create the glance database:

      MariaDB [(none)]> CREATE DATABASE glance;
      
    • Grant proper access to the glance database:

      MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' \
        IDENTIFIED BY 'GLANCE_DBPASS';
      MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' \
        IDENTIFIED BY 'GLANCE_DBPASS';
      

      Replace GLANCE_DBPASS with a suitable password.

    • Exit the database access client.

  2. Source the admin credentials to gain access to admin-only CLI commands:

    $ . admin-openrc
    
  3. To create the service credentials, complete these steps:

    • Create the glance user:

      $ openstack user create --domain default --password-prompt glance
      
      User Password:
      Repeat User Password:
      +---------------------+----------------------------------+
      | Field               | Value                            |
      +---------------------+----------------------------------+
      | domain_id           | default                          |
      | enabled             | True                             |
      | id                  | 3f4e777c4062483ab8d9edd7dff829df |
      | name                | glance                           |
      | options             | {}                               |
      | password_expires_at | None                             |
      +---------------------+----------------------------------+
      
    • Add the admin role to the glance user and service project:

      $ openstack role add --project service --user glance admin
      

      Note

      This command provides no output.

    • Create the glance service entity:

      $ openstack service create --name glance \
        --description "OpenStack Image" image
      
      +-------------+----------------------------------+
      | Field       | Value                            |
      +-------------+----------------------------------+
      | description | OpenStack Image                  |
      | enabled     | True                             |
      | id          | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
      | name        | glance                           |
      | type        | image                            |
      +-------------+----------------------------------+
      
  4. Create the Image service API endpoints:

    $ openstack endpoint create --region RegionOne \
      image public http://controller:9292
    
    +--------------+----------------------------------+
    | Field        | Value                            |
    +--------------+----------------------------------+
    | enabled      | True                             |
    | id           | 340be3625e9b4239a6415d034e98aace |
    | interface    | public                           |
    | region       | RegionOne                        |
    | region_id    | RegionOne                        |
    | service_id   | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
    | service_name | glance                           |
    | service_type | image                            |
    | url          | http://controller:9292           |
    +--------------+----------------------------------+
    
    $ openstack endpoint create --region RegionOne \
      image internal http://controller:9292
    
    +--------------+----------------------------------+
    | Field        | Value                            |
    +--------------+----------------------------------+
    | enabled      | True                             |
    | id           | a6e4b153c2ae4c919eccfdbb7dceb5d2 |
    | interface    | internal                         |
    | region       | RegionOne                        |
    | region_id    | RegionOne                        |
    | service_id   | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
    | service_name | glance                           |
    | service_type | image                            |
    | url          | http://controller:9292           |
    +--------------+----------------------------------+
    
    $ openstack endpoint create --region RegionOne \
      image admin http://controller:9292
    
    +--------------+----------------------------------+
    | Field        | Value                            |
    +--------------+----------------------------------+
    | enabled      | True                             |
    | id           | 0c37ed58103f4300a84ff125a539032d |
    | interface    | admin                            |
    | region       | RegionOne                        |
    | region_id    | RegionOne                        |
    | service_id   | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
    | service_name | glance                           |
    | service_type | image                            |
    | url          | http://controller:9292           |
    +--------------+----------------------------------+
    

Install and configure components

Note

Default configuration files vary by distribution. You might need to add these sections and options rather than modifying existing sections and options. Also, an ellipsis (...) in the configuration snippets indicates potential default configuration options that you should retain.

  1. Install the packages:

    # apt install glance
    
  1. Edit the /etc/glance/glance-api.conf file and complete the following actions:

    • In the [database] section, configure database access:

      [database]
      # ...
      connection = mysql+pymysql://glance:GLANCE_DBPASS@controller/glance
      

      Replace GLANCE_DBPASS with the password you chose for the Image service database.

    • In the [keystone_authtoken] and [paste_deploy] sections, configure Identity service access:

      [keystone_authtoken]
      # ...
      www_authenticate_uri = http://controller:5000
      auth_url = http://controller:5000
      memcached_servers = controller:11211
      auth_type = password
      project_domain_name = Default
      user_domain_name = Default
      project_name = service
      username = glance
      password = GLANCE_PASS
      
      [paste_deploy]
      # ...
      flavor = keystone
      

      Replace GLANCE_PASS with the password you chose for the glance user in the Identity service.

      Note

      Comment out or remove any other options in the [keystone_authtoken] section.

    • In the [glance_store] section, configure the local file system store and location of image files:

      [glance_store]
      # ...
      stores = file,http
      default_store = file
      filesystem_store_datadir = /var/lib/glance/images/
      
  2. Edit the /etc/glance/glance-registry.conf file and complete the following actions:

    Note

    The Glance Registry Service and its APIs have been DEPRECATED in the Queens release and are subject to removal at the beginning of the ‘S’ development cycle, following the OpenStack standard deprecation policy.

    For more information, see the Glance specification document Actually Deprecate the Glance Registry.

    • In the [database] section, configure database access:

      [database]
      # ...
      connection = mysql+pymysql://glance:GLANCE_DBPASS@controller/glance
      

      Replace GLANCE_DBPASS with the password you chose for the Image service database.

    • In the [keystone_authtoken] and [paste_deploy] sections, configure Identity service access:

      [keystone_authtoken]
      # ...
      www_authenticate_uri = http://controller:5000
      auth_url = http://controller:5000
      memcached_servers = controller:11211
      auth_type = password
      project_domain_name = Default
      user_domain_name = Default
      project_name = service
      username = glance
      password = GLANCE_PASS
      
      [paste_deploy]
      # ...
      flavor = keystone
      

      Replace GLANCE_PASS with the password you chose for the glance user in the Identity service.

      Note

      Comment out or remove any other options in the [keystone_authtoken] section.

  3. Populate the Image service database:

    # su -s /bin/sh -c "glance-manage db_sync" glance
    

    Note

    Ignore any deprecation messages in this output.

Finalize installation

  1. Restart the Image services:

    # service glance-registry restart
    # service glance-api restart
    
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.