glance-scrubber.conf

DEFAULT

allow_additional_image_properties
Type

boolean

Default

True

Allow users to add additional/custom properties to images.

Glance defines a standard set of properties (in its schema) that appear on every image. These properties are also known as base properties. In addition to these properties, Glance allows users to add custom properties to images. These are known as additional properties.

By default, this configuration option is set to True and users are allowed to add additional properties. The number of additional properties that can be added to an image can be controlled via image_property_quota configuration option.

Possible values:
  • True

  • False

Related options:
  • image_property_quota

Warning

This option is deprecated for removal since Ussuri. Its value may be silently ignored in the future.

Reason

This option is redundant. Control custom image property usage via the ‘image_property_quota’ configuration option. This option is scheduled to be removed during the Victoria development cycle.

hashing_algorithm
Type

string

Default

sha512

Secure hashing algorithm used for computing the ‘os_hash_value’ property.

This option configures the Glance “multihash”, which consists of two image properties: the ‘os_hash_algo’ and the ‘os_hash_value’. The ‘os_hash_algo’ will be populated by the value of this configuration option, and the ‘os_hash_value’ will be populated by the hexdigest computed when the algorithm is applied to the uploaded or imported image data.

The value must be a valid secure hash algorithm name recognized by the python ‘hashlib’ library. You can determine what these are by examining the ‘hashlib.algorithms_available’ data member of the version of the library being used in your Glance installation. For interoperability purposes, however, we recommend that you use the set of secure hash names supplied by the ‘hashlib.algorithms_guaranteed’ data member because those algorithms are guaranteed to be supported by the ‘hashlib’ library on all platforms. Thus, any image consumer using ‘hashlib’ locally should be able to verify the ‘os_hash_value’ of the image.

The default value of ‘sha512’ is a performant secure hash algorithm.

If this option is misconfigured, any attempts to store image data will fail. For that reason, we recommend using the default value.

Possible values:
  • Any secure hash algorithm name recognized by the Python ‘hashlib’ library

Related options:
  • None

image_member_quota
Type

integer

Default

128

Maximum number of image members per image.

This limits the maximum of users an image can be shared with. Any negative value is interpreted as unlimited.

Related options:
  • None

image_property_quota
Type

integer

Default

128

Maximum number of properties allowed on an image.

This enforces an upper limit on the number of additional properties an image can have. Any negative value is interpreted as unlimited.

NOTE: This won’t have any impact if additional properties are disabled. Please refer to allow_additional_image_properties.

Related options:
  • allow_additional_image_properties

image_tag_quota
Type

integer

Default

128

Maximum number of tags allowed on an image.

Any negative value is interpreted as unlimited.

Related options:
  • None

image_location_quota
Type

integer

Default

10

Maximum number of locations allowed on an image.

Any negative value is interpreted as unlimited.

Related options:
  • None

limit_param_default
Type

integer

Default

25

Minimum Value

1

The default number of results to return for a request.

Responses to certain API requests, like list images, may return multiple items. The number of results returned can be explicitly controlled by specifying the limit parameter in the API request. However, if a limit parameter is not specified, this configuration value will be used as the default number of results to be returned for any API request.

NOTES:
  • The value of this configuration option may not be greater than the value specified by api_limit_max.

  • Setting this to a very large value may slow down database queries and increase response times. Setting this to a very low value may result in poor user experience.

Possible values:
  • Any positive integer

Related options:
  • api_limit_max

api_limit_max
Type

integer

Default

1000

Minimum Value

1

Maximum number of results that could be returned by a request.

As described in the help text of limit_param_default, some requests may return multiple results. The number of results to be returned are governed either by the limit parameter in the request or the limit_param_default configuration option. The value in either case, can’t be greater than the absolute maximum defined by this configuration option. Anything greater than this value is trimmed down to the maximum value defined here.

NOTE: Setting this to a very large value may slow down database

queries and increase response times. Setting this to a very low value may result in poor user experience.

Possible values:
  • Any positive integer

Related options:
  • limit_param_default

show_image_direct_url
Type

boolean

Default

False

Show direct image location when returning an image.

This configuration option indicates whether to show the direct image location when returning image details to the user. The direct image location is where the image data is stored in backend storage. This image location is shown under the image property direct_url.

When multiple image locations exist for an image, the best location is displayed based on the location strategy indicated by the configuration option location_strategy.

NOTES:
  • Revealing image locations can present a GRAVE SECURITY RISK as image locations can sometimes include credentials. Hence, this is set to False by default. Set this to True with EXTREME CAUTION and ONLY IF you know what you are doing!

  • If an operator wishes to avoid showing any image location(s) to the user, then both this option and show_multiple_locations MUST be set to False.

Possible values:
  • True

  • False

Related options:
  • show_multiple_locations

  • location_strategy

show_multiple_locations
Type

boolean

Default

False

Show all image locations when returning an image.

This configuration option indicates whether to show all the image locations when returning image details to the user. When multiple image locations exist for an image, the locations are ordered based on the location strategy indicated by the configuration opt location_strategy. The image locations are shown under the image property locations.

NOTES:
  • Revealing image locations can present a GRAVE SECURITY RISK as image locations can sometimes include credentials. Hence, this is set to False by default. Set this to True with EXTREME CAUTION and ONLY IF you know what you are doing!

  • See https://wiki.openstack.org/wiki/OSSN/OSSN-0065 for more information.

  • If an operator wishes to avoid showing any image location(s) to the user, then both this option and show_image_direct_url MUST be set to False.

Possible values:
  • True

  • False

Related options:
  • show_image_direct_url

  • location_strategy

Warning

This option is deprecated for removal since Newton. Its value may be silently ignored in the future.

Reason

Use of this option, deprecated since Newton, is a security risk and will be removed once we figure out a way to satisfy those use cases that currently require it. An earlier announcement that the same functionality can be achieved with greater granularity by using policies is incorrect. You cannot work around this option via policy configuration at the present time, though that is the direction we believe the fix will take. Please keep an eye on the Glance release notes to stay up to date on progress in addressing this issue.

image_size_cap
Type

integer

Default

1099511627776

Minimum Value

1

Maximum Value

9223372036854775808

Maximum size of image a user can upload in bytes.

An image upload greater than the size mentioned here would result in an image creation failure. This configuration option defaults to 1099511627776 bytes (1 TiB).

NOTES:
  • This value should only be increased after careful consideration and must be set less than or equal to 8 EiB (9223372036854775808).

  • This value must be set with careful consideration of the backend storage capacity. Setting this to a very low value may result in a large number of image failures. And, setting this to a very large value may result in faster consumption of storage. Hence, this must be set according to the nature of images created and storage capacity available.

Possible values:
  • Any positive number less than or equal to 9223372036854775808

user_storage_quota
Type

string

Default

0

Maximum amount of image storage per tenant.

This enforces an upper limit on the cumulative storage consumed by all images of a tenant across all stores. This is a per-tenant limit.

The default unit for this configuration option is Bytes. However, storage units can be specified using case-sensitive literals B, KB, MB, GB and TB representing Bytes, KiloBytes, MegaBytes, GigaBytes and TeraBytes respectively. Note that there should not be any space between the value and unit. Value 0 signifies no quota enforcement. Negative values are invalid and result in errors.

Possible values:
  • A string that is a valid concatenation of a non-negative integer representing the storage value and an optional string literal representing storage units as mentioned above.

Related options:
  • None

pydev_worker_debug_host
Type

host address

Default

localhost

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Host address of the pydev server.

Provide a string value representing the hostname or IP of the pydev server to use for debugging. The pydev server listens for debug connections on this address, facilitating remote debugging in Glance.

Possible values:
  • Valid hostname

  • Valid IP address

Related options:
  • None

pydev_worker_debug_port
Type

port number

Default

5678

Minimum Value

0

Maximum Value

65535

Port number that the pydev server will listen on.

Provide a port number to bind the pydev server to. The pydev process accepts debug connections on this port and facilitates remote debugging in Glance.

Possible values:
  • A valid port number

Related options:
  • None

metadata_encryption_key
Type

string

Default

<None>

AES key for encrypting store location metadata.

Provide a string value representing the AES cipher to use for encrypting Glance store metadata.

NOTE: The AES key to use must be set to a random string of length 16, 24 or 32 bytes.

Possible values:
  • String value representing a valid AES key

Related options:
  • None

digest_algorithm
Type

string

Default

sha256

Digest algorithm to use for digital signature.

Provide a string value representing the digest algorithm to use for generating digital signatures. By default, sha256 is used.

To get a list of the available algorithms supported by the version of OpenSSL on your platform, run the command: openssl list-message-digest-algorithms. Examples are ‘sha1’, ‘sha256’, and ‘sha512’.

NOTE: digest_algorithm is not related to Glance’s image signing and verification. It is only used to sign the universally unique identifier (UUID) as a part of the certificate file and key file validation.

Possible values:
  • An OpenSSL message digest algorithm identifier

Relation options:
  • None

node_staging_uri
Type

string

Default

file:///tmp/staging/

The URL provides location where the temporary data will be stored

This option is for Glance internal use only. Glance will save the image data uploaded by the user to ‘staging’ endpoint during the image import process.

This option does not change the ‘staging’ API endpoint by any means.

NOTE: It is discouraged to use same path as [task]/work_dir

NOTE: ‘file://<absolute-directory-path>’ is the only option api_image_import flow will support for now.

NOTE: The staging path must be on shared filesystem available to all Glance API nodes.

Possible values:
  • String starting with ‘file://’ followed by absolute FS path

Related options:
  • [task]/work_dir

enabled_import_methods
Type

list

Default

['glance-direct', 'web-download', 'copy-image']

List of enabled Image Import Methods

‘glance-direct’, ‘copy-image’ and ‘web-download’ are enabled by default.

Related options:
  • [DEFAULT]/node_staging_uri

scrub_time
Type

integer

Default

0

Minimum Value

0

The amount of time, in seconds, to delay image scrubbing.

When delayed delete is turned on, an image is put into pending_delete state upon deletion until the scrubber deletes its image data. Typically, soon after the image is put into pending_delete state, it is available for scrubbing. However, scrubbing can be delayed until a later point using this configuration option. This option denotes the time period an image spends in pending_delete state before it is available for scrubbing.

It is important to realize that this has storage implications. The larger the scrub_time, the longer the time to reclaim backend storage from deleted images.

Possible values:
  • Any non-negative integer

Related options:
  • delayed_delete

scrub_pool_size
Type

integer

Default

1

Minimum Value

1

The size of thread pool to be used for scrubbing images.

When there are a large number of images to scrub, it is beneficial to scrub images in parallel so that the scrub queue stays in control and the backend storage is reclaimed in a timely fashion. This configuration option denotes the maximum number of images to be scrubbed in parallel. The default value is one, which signifies serial scrubbing. Any value above one indicates parallel scrubbing.

Possible values:
  • Any non-zero positive integer

Related options:
  • delayed_delete

delayed_delete
Type

boolean

Default

False

Turn on/off delayed delete.

Typically when an image is deleted, the glance-api service puts the image into deleted state and deletes its data at the same time. Delayed delete is a feature in Glance that delays the actual deletion of image data until a later point in time (as determined by the configuration option scrub_time). When delayed delete is turned on, the glance-api service puts the image into pending_delete state upon deletion and leaves the image data in the storage backend for the image scrubber to delete at a later time. The image scrubber will move the image into deleted state upon successful deletion of image data.

NOTE: When delayed delete is turned on, image scrubber MUST be running as a periodic task to prevent the backend storage from filling up with undesired usage.

Possible values:
  • True

  • False

Related options:
  • scrub_time

  • wakeup_time

  • scrub_pool_size

wakeup_time
Type

integer

Default

300

Minimum Value

0

Time interval, in seconds, between scrubber runs in daemon mode.

Scrubber can be run either as a cron job or daemon. When run as a daemon, this configuration time specifies the time period between two runs. When the scrubber wakes up, it fetches and scrubs all pending_delete images that are available for scrubbing after taking scrub_time into consideration.

If the wakeup time is set to a large number, there may be a large number of images to be scrubbed for each run. Also, this impacts how quickly the backend storage is reclaimed.

Possible values:
  • Any non-negative integer

Related options:
  • daemon

  • delayed_delete

daemon
Type

boolean

Default

False

Run scrubber as a daemon.

This boolean configuration option indicates whether scrubber should run as a long-running process that wakes up at regular intervals to scrub images. The wake up interval can be specified using the configuration option wakeup_time.

If this configuration option is set to False, which is the default value, scrubber runs once to scrub images and exits. In this case, if the operator wishes to implement continuous scrubbing of images, scrubber needs to be scheduled as a cron job.

Possible values:
  • True

  • False

Related options:
  • wakeup_time

restore
Type

string

Default

<None>

Restore the image status from ‘pending_delete’ to ‘active’.

This option is used by administrator to reset the image’s status from ‘pending_delete’ to ‘active’ when the image is deleted by mistake and ‘pending delete’ feature is enabled in Glance. Please make sure the glance-scrubber daemon is stopped before restoring the image to avoid image data inconsistency.

Possible values:
  • image’s uuid

debug
Type

boolean

Default

False

Mutable

This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append
Type

string

Default

<None>

Mutable

This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

Deprecated Variations

Group

Name

DEFAULT

log-config

DEFAULT

log_config

log_date_format
Type

string

Default

%Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file
Type

string

Default

<None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations

Group

Name

DEFAULT

logfile

log_dir
Type

string

Default

<None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations

Group

Name

DEFAULT

logdir

watch_log_file
Type

boolean

Default

False

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog
Type

boolean

Default

False

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal
Type

boolean

Default

False

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility
Type

string

Default

LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json
Type

boolean

Default

False

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr
Type

boolean

Default

False

Log output to standard error. This option is ignored if log_config_append is set.

use_eventlog
Type

boolean

Default

False

Log output to Windows Event Log.

log_rotate_interval
Type

integer

Default

1

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is setto “interval”.

log_rotate_interval_type
Type

string

Default

days

Valid Values

Seconds, Minutes, Hours, Days, Weekday, Midnight

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

max_logfile_count
Type

integer

Default

30

Maximum number of rotated log files.

max_logfile_size_mb
Type

integer

Default

200

Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.

log_rotation_type
Type

string

Default

none

Valid Values

interval, size, none

Log rotation type.

Possible values

interval

Rotate logs at predefined time intervals.

size

Rotate logs once they reach a predefined size.

none

Do not rotate log files.

logging_context_format_string
Type

string

Default

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string
Type

string

Default

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix
Type

string

Default

%(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix
Type

string

Default

%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format
Type

string

Default

%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

default_log_levels
Type

list

Default

['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors
Type

boolean

Default

False

Enables or disables publication of error events.

instance_format
Type

string

Default

"[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format
Type

string

Default

"[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval
Type

integer

Default

0

Interval, number of seconds, of log rate limiting.

rate_limit_burst
Type

integer

Default

0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level
Type

string

Default

CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations
Type

boolean

Default

False

Enables or disables fatal status of deprecations.

database

sqlite_synchronous
Type

boolean

Default

True

If True, SQLite uses synchronous mode.

Deprecated Variations

Group

Name

DEFAULT

sqlite_synchronous

backend
Type

string

Default

sqlalchemy

The back end to use for the database.

Deprecated Variations

Group

Name

DEFAULT

db_backend

connection
Type

string

Default

<None>

The SQLAlchemy connection string to use to connect to the database.

Deprecated Variations

Group

Name

DEFAULT

sql_connection

DATABASE

sql_connection

sql

connection

slave_connection
Type

string

Default

<None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode
Type

string

Default

TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

mysql_enable_ndb
Type

boolean

Default

False

If True, transparently enables support for handling MySQL Cluster (NDB).

connection_recycle_time
Type

integer

Default

3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

Deprecated Variations

Group

Name

DATABASE

idle_timeout

database

idle_timeout

DEFAULT

sql_idle_timeout

DATABASE

sql_idle_timeout

sql

idle_timeout

max_pool_size
Type

integer

Default

5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

Deprecated Variations

Group

Name

DEFAULT

sql_max_pool_size

DATABASE

sql_max_pool_size

max_retries
Type

integer

Default

10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

Deprecated Variations

Group

Name

DEFAULT

sql_max_retries

DATABASE

sql_max_retries

retry_interval
Type

integer

Default

10

Interval between retries of opening a SQL connection.

Deprecated Variations

Group

Name

DEFAULT

sql_retry_interval

DATABASE

reconnect_interval

max_overflow
Type

integer

Default

50

If set, use this value for max_overflow with SQLAlchemy.

Deprecated Variations

Group

Name

DEFAULT

sql_max_overflow

DATABASE

sqlalchemy_max_overflow

connection_debug
Type

integer

Default

0

Minimum Value

0

Maximum Value

100

Verbosity of SQL debugging information: 0=None, 100=Everything.

Deprecated Variations

Group

Name

DEFAULT

sql_connection_debug

connection_trace
Type

boolean

Default

False

Add Python stack traces to SQL as comment strings.

Deprecated Variations

Group

Name

DEFAULT

sql_connection_trace

pool_timeout
Type

integer

Default

<None>

If set, use this value for pool_timeout with SQLAlchemy.

Deprecated Variations

Group

Name

DATABASE

sqlalchemy_pool_timeout

use_db_reconnect
Type

boolean

Default

False

Enable the experimental use of database reconnect on connection lost.

db_retry_interval
Type

integer

Default

1

Seconds between retries of a database transaction.

db_inc_retry_interval
Type

boolean

Default

True

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval
Type

integer

Default

10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries
Type

integer

Default

20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

connection_parameters
Type

string

Default

''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

use_tpool
Type

boolean

Default

False

Enable the experimental use of thread pooling for all DB API calls

Deprecated Variations

Group

Name

DEFAULT

dbapi_use_tpool

glance_store

stores
Type

list

Default

['file', 'http']

List of enabled Glance stores.

Register the storage backends to use for storing disk images as a comma separated list. The default stores enabled for storing disk images with Glance are file and http.

Possible values:
  • A comma separated list that could include:
    • file

    • http

    • swift

    • rbd

    • cinder

    • vmware

    • s3

Related Options:
  • default_store

Warning

This option is deprecated for removal since Rocky. Its value may be silently ignored in the future.

Reason

This option is deprecated against new config option enabled_backends which helps to configure multiple backend stores of different schemes. This option is scheduled for removal in the U development cycle.

default_store
Type

string

Default

file

Valid Values

file, filesystem, http, https, swift, swift+http, swift+https, swift+config, rbd, cinder, vsphere, s3

The default scheme to use for storing images.

Provide a string value representing the default scheme to use for storing images. If not set, Glance uses file as the default scheme to store images with the file store.

NOTE: The value given for this configuration option must be a valid scheme for a store registered with the stores configuration option.

Possible values:
  • file

  • filesystem

  • http

  • https

  • swift

  • swift+http

  • swift+https

  • swift+config

  • rbd

  • cinder

  • vsphere

  • s3

Related Options:
  • stores

Warning

This option is deprecated for removal since Rocky. Its value may be silently ignored in the future.

Reason

This option is deprecated against new config option default_backend which acts similar to default_store config option. This option is scheduled for removal in the U development cycle.

cinder_catalog_info
Type

string

Default

volumev2::publicURL

Information to match when looking for cinder in the service catalog.

When the cinder_endpoint_template is not set and any of cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, cinder_store_password is not set, cinder store uses this information to lookup cinder endpoint from the service catalog in the current context. cinder_os_region_name, if set, is taken into consideration to fetch the appropriate endpoint.

The service catalog can be listed by the openstack catalog list command.

Possible values:
  • A string of of the following form: <service_type>:<service_name>:<interface> At least service_type and interface should be specified. service_name can be omitted.

Related options:
  • cinder_os_region_name

  • cinder_endpoint_template

  • cinder_store_auth_address

  • cinder_store_user_name

  • cinder_store_project_name

  • cinder_store_password

cinder_endpoint_template
Type

string

Default

<None>

Override service catalog lookup with template for cinder endpoint.

When this option is set, this value is used to generate cinder endpoint, instead of looking up from the service catalog. This value is ignored if cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, and cinder_store_password are specified.

If this configuration option is set, cinder_catalog_info will be ignored.

Possible values:
  • URL template string for cinder endpoint, where %(tenant)s is replaced with the current tenant (project) name. For example: http://cinder.openstack.example.org/v2/%(tenant)s

Related options:
  • cinder_store_auth_address

  • cinder_store_user_name

  • cinder_store_project_name

  • cinder_store_password

  • cinder_catalog_info

cinder_os_region_name
Type

string

Default

<None>

Region name to lookup cinder service from the service catalog.

This is used only when cinder_catalog_info is used for determining the endpoint. If set, the lookup for cinder endpoint by this node is filtered to the specified region. It is useful when multiple regions are listed in the catalog. If this is not set, the endpoint is looked up from every region.

Possible values:
  • A string that is a valid region name.

Related options:
  • cinder_catalog_info

Deprecated Variations

Group

Name

glance_store

os_region_name

cinder_ca_certificates_file
Type

string

Default

<None>

Location of a CA certificates file used for cinder client requests.

The specified CA certificates file, if set, is used to verify cinder connections via HTTPS endpoint. If the endpoint is HTTP, this value is ignored. cinder_api_insecure must be set to True to enable the verification.

Possible values:
  • Path to a ca certificates file

Related options:
  • cinder_api_insecure

cinder_http_retries
Type

integer

Default

3

Minimum Value

0

Number of cinderclient retries on failed http calls.

When a call failed by any errors, cinderclient will retry the call up to the specified times after sleeping a few seconds.

Possible values:
  • A positive integer

Related options:
  • None

cinder_state_transition_timeout
Type

integer

Default

300

Minimum Value

0

Time period, in seconds, to wait for a cinder volume transition to complete.

When the cinder volume is created, deleted, or attached to the glance node to read/write the volume data, the volume’s state is changed. For example, the newly created volume status changes from creating to available after the creation process is completed. This specifies the maximum time to wait for the status change. If a timeout occurs while waiting, or the status is changed to an unexpected value (e.g. error`), the image creation fails.

Possible values:
  • A positive integer

Related options:
  • None

cinder_api_insecure
Type

boolean

Default

False

Allow to perform insecure SSL requests to cinder.

If this option is set to True, HTTPS endpoint connection is verified using the CA certificates file specified by cinder_ca_certificates_file option.

Possible values:
  • True

  • False

Related options:
  • cinder_ca_certificates_file

cinder_store_auth_address
Type

string

Default

<None>

The address where the cinder authentication service is listening.

When all of cinder_store_auth_address, cinder_store_user_name, cinder_store_project_name, and cinder_store_password options are specified, the specified values are always used for the authentication. This is useful to hide the image volumes from users by storing them in a project/tenant specific to the image service. It also enables users to share the image volume among other projects under the control of glance’s ACL.

If either of these options are not set, the cinder endpoint is looked up from the service catalog, and current context’s user and project are used.

Possible values:
  • A valid authentication service address, for example: http://openstack.example.org/identity/v2.0

Related options:
  • cinder_store_user_name

  • cinder_store_password

  • cinder_store_project_name

cinder_store_user_name
Type

string

Default

<None>

User name to authenticate against cinder.

This must be used with all the following related options. If any of these are not specified, the user of the current context is used.

Possible values:
  • A valid user name

Related options:
  • cinder_store_auth_address

  • cinder_store_password

  • cinder_store_project_name

cinder_store_password
Type

string

Default

<None>

Password for the user authenticating against cinder.

This must be used with all the following related options. If any of these are not specified, the user of the current context is used.

Possible values:
  • A valid password for the user specified by cinder_store_user_name

Related options:
  • cinder_store_auth_address

  • cinder_store_user_name

  • cinder_store_project_name

cinder_store_project_name
Type

string

Default

<None>

Project name where the image volume is stored in cinder.

If this configuration option is not set, the project in current context is used.

This must be used with all the following related options. If any of these are not specified, the project of the current context is used.

Possible values:
  • A valid project name

Related options:
  • cinder_store_auth_address

  • cinder_store_user_name

  • cinder_store_password

rootwrap_config
Type

string

Default

/etc/glance/rootwrap.conf

Path to the rootwrap configuration file to use for running commands as root.

The cinder store requires root privileges to operate the image volumes (for connecting to iSCSI/FC volumes and reading/writing the volume data, etc.). The configuration file should allow the required commands by cinder store and os-brick library.

Possible values:
  • Path to the rootwrap config file

Related options:
  • None

cinder_volume_type
Type

string

Default

<None>

Volume type that will be used for volume creation in cinder.

Some cinder backends can have several volume types to optimize storage usage. Adding this option allows an operator to choose a specific volume type in cinder that can be optimized for images.

If this is not set, then the default volume type specified in the cinder configuration will be used for volume creation.

Possible values:
  • A valid volume type from cinder

Related options:
  • None

NOTE: You cannot use an encrypted volume_type associated with an NFS backend. An encrypted volume stored on an NFS backend will raise an exception whenever glance_store tries to write or access image data stored in that volume. Consult your Cinder administrator to determine an appropriate volume_type.

cinder_enforce_multipath
Type

boolean

Default

False

If this is set to True, attachment of volumes for image transfer will be aborted when multipathd is not running. Otherwise, it will fallback to single path.

Possible values:
  • True or False

Related options:
  • cinder_use_multipath

cinder_use_multipath
Type

boolean

Default

False

Flag to identify mutipath is supported or not in the deployment.

Set it to False if multipath is not supported.

Possible values:
  • True or False

Related options:
  • cinder_enforce_multipath

cinder_mount_point_base
Type

string

Default

/var/lib/glance/mnt

Directory where the NFS volume is mounted on the glance node.

Possible values:

  • A string representing absolute path of mount point.

filesystem_store_datadir
Type

string

Default

/var/lib/glance/images

Directory to which the filesystem backend store writes images.

Upon start up, Glance creates the directory if it doesn’t already exist and verifies write access to the user under which glance-api runs. If the write access isn’t available, a BadStoreConfiguration exception is raised and the filesystem store may not be available for adding new images.

NOTE: This directory is used only when filesystem store is used as a storage backend. Either filesystem_store_datadir or filesystem_store_datadirs option must be specified in glance-api.conf. If both options are specified, a BadStoreConfiguration will be raised and the filesystem store may not be available for adding new images.

Possible values:
  • A valid path to a directory

Related options:
  • filesystem_store_datadirs

  • filesystem_store_file_perm

filesystem_store_datadirs
Type

multi-valued

Default

''

List of directories and their priorities to which the filesystem backend store writes images.

The filesystem store can be configured to store images in multiple directories as opposed to using a single directory specified by the filesystem_store_datadir configuration option. When using multiple directories, each directory can be given an optional priority to specify the preference order in which they should be used. Priority is an integer that is concatenated to the directory path with a colon where a higher value indicates higher priority. When two directories have the same priority, the directory with most free space is used. When no priority is specified, it defaults to zero.

More information on configuring filesystem store with multiple store directories can be found at https://docs.openstack.org/glance/latest/configuration/configuring.html

NOTE: This directory is used only when filesystem store is used as a storage backend. Either filesystem_store_datadir or filesystem_store_datadirs option must be specified in glance-api.conf. If both options are specified, a BadStoreConfiguration will be raised and the filesystem store may not be available for adding new images.

Possible values:
  • List of strings of the following form:
    • <a valid directory path>:<optional integer priority>

Related options:
  • filesystem_store_datadir

  • filesystem_store_file_perm

filesystem_store_metadata_file
Type

string

Default

<None>

Filesystem store metadata file.

The path to a file which contains the metadata to be returned with any location associated with the filesystem store. Once this option is set, it is used for new images created afterward only - previously existing images are not affected.

The file must contain a valid JSON object. The object should contain the keys id and mountpoint. The value for both keys should be a string.

Possible values:
  • A valid path to the store metadata file

Related options:
  • None

filesystem_store_file_perm
Type

integer

Default

0

File access permissions for the image files.

Set the intended file access permissions for image data. This provides a way to enable other services, e.g. Nova, to consume images directly from the filesystem store. The users running the services that are intended to be given access to could be made a member of the group that owns the files created. Assigning a value less then or equal to zero for this configuration option signifies that no changes be made to the default permissions. This value will be decoded as an octal digit.

For more information, please refer the documentation at https://docs.openstack.org/glance/latest/configuration/configuring.html

Possible values:
  • A valid file access permission

  • Zero

  • Any negative integer

Related options:
  • None

filesystem_store_chunk_size
Type

integer

Default

65536

Minimum Value

1

Chunk size, in bytes.

The chunk size used when reading or writing image files. Raising this value may improve the throughput but it may also slightly increase the memory usage when handling a large number of requests.

Possible Values:
  • Any positive integer value

Related options:
  • None

filesystem_thin_provisioning
Type

boolean

Default

False

Enable or not thin provisioning in this backend.

This configuration option enable the feature of not really write null byte sequences on the filesystem, the holes who can appear will automatically be interpreted by the filesystem as null bytes, and do not really consume your storage. Enabling this feature will also speed up image upload and save network trafic in addition to save space in the backend, as null bytes sequences are not sent over the network.

Possible Values:
  • True

  • False

Related options:
  • None

https_ca_certificates_file
Type

string

Default

<None>

Path to the CA bundle file.

This configuration option enables the operator to use a custom Certificate Authority file to verify the remote server certificate. If this option is set, the https_insecure option will be ignored and the CA file specified will be used to authenticate the server certificate and establish a secure connection to the server.

Possible values:
  • A valid path to a CA file

Related options:
  • https_insecure

https_insecure
Type

boolean

Default

True

Set verification of the remote server certificate.

This configuration option takes in a boolean value to determine whether or not to verify the remote server certificate. If set to True, the remote server certificate is not verified. If the option is set to False, then the default CA truststore is used for verification.

This option is ignored if https_ca_certificates_file is set. The remote server certificate will then be verified using the file specified using the https_ca_certificates_file option.

Possible values:
  • True

  • False

Related options:
  • https_ca_certificates_file

http_proxy_information
Type

dict

Default

{}

The http/https proxy information to be used to connect to the remote server.

This configuration option specifies the http/https proxy information that should be used to connect to the remote server. The proxy information should be a key value pair of the scheme and proxy, for example, http:10.0.0.1:3128. You can also specify proxies for multiple schemes by separating the key value pairs with a comma, for example, http:10.0.0.1:3128, https:10.0.0.1:1080.

Possible values:
  • A comma separated list of scheme:proxy pairs as described above

Related options:
  • None

rbd_store_chunk_size
Type

integer

Default

8

Minimum Value

1

Size, in megabytes, to chunk RADOS images into.

Provide an integer value representing the size in megabytes to chunk Glance images into. The default chunk size is 8 megabytes. For optimal performance, the value should be a power of two.

When Ceph’s RBD object storage system is used as the storage backend for storing Glance images, the images are chunked into objects of the size set using this option. These chunked objects are then stored across the distributed block data store to use for Glance.

Possible Values:
  • Any positive integer value

Related options:
  • None

rbd_store_pool
Type

string

Default

images

RADOS pool in which images are stored.

When RBD is used as the storage backend for storing Glance images, the images are stored by means of logical grouping of the objects (chunks of images) into a pool. Each pool is defined with the number of placement groups it can contain. The default pool that is used is ‘images’.

More information on the RBD storage backend can be found here: http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/

Possible Values:
  • A valid pool name

Related options:
  • None

rbd_store_user
Type

string

Default

<None>

RADOS user to authenticate as.

This configuration option takes in the RADOS user to authenticate as. This is only needed when RADOS authentication is enabled and is applicable only if the user is using Cephx authentication. If the value for this option is not set by the user or is set to None, a default value will be chosen, which will be based on the client. section in rbd_store_ceph_conf.

Possible Values:
  • A valid RADOS user

Related options:
  • rbd_store_ceph_conf

rbd_store_ceph_conf
Type

string

Default

''

Ceph configuration file path.

This configuration option specifies the path to the Ceph configuration file to be used. If the value for this option is not set by the user or is set to the empty string, librados will read the standard ceph.conf file by searching the default Ceph configuration file locations in sequential order. See the Ceph documentation for details.

NOTE: If using Cephx authentication, this file should include a reference to the right keyring in a client.<USER> section

NOTE 2: If you leave this option empty (the default), the actual Ceph configuration file used may change depending on what version of librados is being used. If it is important for you to know exactly which configuration file is in effect, you may specify that file here using this option.

Possible Values:
  • A valid path to a configuration file

Related options:
  • rbd_store_user

rados_connect_timeout
Type

integer

Default

0

Timeout value for connecting to Ceph cluster.

This configuration option takes in the timeout value in seconds used when connecting to the Ceph cluster i.e. it sets the time to wait for glance-api before closing the connection. This prevents glance-api hangups during the connection to RBD. If the value for this option is set to less than or equal to 0, no timeout is set and the default librados value is used.

Possible Values:
  • Any integer value

Related options:
  • None

rbd_thin_provisioning
Type

boolean

Default

False

Enable or not thin provisioning in this backend.

This configuration option enable the feature of not really write null byte sequences on the RBD backend, the holes who can appear will automatically be interpreted by Ceph as null bytes, and do not really consume your storage. Enabling this feature will also speed up image upload and save network trafic in addition to save space in the backend, as null bytes sequences are not sent over the network.

Possible Values:
  • True

  • False

Related options:
  • None

swift_store_auth_insecure
Type

boolean

Default

False

Set verification of the server certificate.

This boolean determines whether or not to verify the server certificate. If this option is set to True, swiftclient won’t check for a valid SSL certificate when authenticating. If the option is set to False, then the default CA truststore is used for verification.

Possible values:
  • True

  • False

Related options:
  • swift_store_cacert

swift_store_cacert
Type

string

Default

/etc/ssl/certs/ca-certificates.crt

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Path to the CA bundle file.

This configuration option enables the operator to specify the path to a custom Certificate Authority file for SSL verification when connecting to Swift.

Possible values:
  • A valid path to a CA file

Related options:
  • swift_store_auth_insecure

swift_store_region
Type

string

Default

RegionTwo

This option has a sample default set, which means that its actual default value may vary from the one documented above.

The region of Swift endpoint to use by Glance.

Provide a string value representing a Swift region where Glance can connect to for image storage. By default, there is no region set.

When Glance uses Swift as the storage backend to store images for a specific tenant that has multiple endpoints, setting of a Swift region with swift_store_region allows Glance to connect to Swift in the specified region as opposed to a single region connectivity.

This option can be configured for both single-tenant and multi-tenant storage.

NOTE: Setting the region with swift_store_region is tenant-specific and is necessary only if the tenant has multiple endpoints across different regions.

Possible values:
  • A string value representing a valid Swift region.

Related Options:
  • None

swift_store_endpoint
Type

string

Default

https://swift.openstack.example.org/v1/path_not_including_container_name

This option has a sample default set, which means that its actual default value may vary from the one documented above.

The URL endpoint to use for Swift backend storage.

Provide a string value representing the URL endpoint to use for storing Glance images in Swift store. By default, an endpoint is not set and the storage URL returned by auth is used. Setting an endpoint with swift_store_endpoint overrides the storage URL and is used for Glance image storage.

NOTE: The URL should include the path up to, but excluding the container. The location of an object is obtained by appending the container and object to the configured URL.

Possible values:
  • String value representing a valid URL path up to a Swift container

Related Options:
  • None

swift_store_endpoint_type
Type

string

Default

publicURL

Valid Values

publicURL, adminURL, internalURL

Endpoint Type of Swift service.

This string value indicates the endpoint type to use to fetch the Swift endpoint. The endpoint type determines the actions the user will be allowed to perform, for instance, reading and writing to the Store. This setting is only used if swift_store_auth_version is greater than 1.

Possible values:
  • publicURL

  • adminURL

  • internalURL

Related options:
  • swift_store_endpoint

swift_store_service_type
Type

string

Default

object-store

Type of Swift service to use.

Provide a string value representing the service type to use for storing images while using Swift backend storage. The default service type is set to object-store.

NOTE: If swift_store_auth_version is set to 2, the value for this configuration option needs to be object-store. If using a higher version of Keystone or a different auth scheme, this option may be modified.

Possible values:
  • A string representing a valid service type for Swift storage.

Related Options:
  • None

swift_store_container
Type

string

Default

glance

Name of single container to store images/name prefix for multiple containers

When a single container is being used to store images, this configuration option indicates the container within the Glance account to be used for storing all images. When multiple containers are used to store images, this will be the name prefix for all containers. Usage of single/multiple containers can be controlled using the configuration option swift_store_multiple_containers_seed.

When using multiple containers, the containers will be named after the value set for this configuration option with the first N chars of the image UUID as the suffix delimited by an underscore (where N is specified by swift_store_multiple_containers_seed).

Example: if the seed is set to 3 and swift_store_container = glance, then an image with UUID fdae39a1-bac5-4238-aba4-69bcc726e848 would be placed in the container glance_fda. All dashes in the UUID are included when creating the container name but do not count toward the character limit, so when N=10 the container name would be glance_fdae39a1-ba.

Possible values:
  • If using single container, this configuration option can be any string that is a valid swift container name in Glance’s Swift account

  • If using multiple containers, this configuration option can be any string as long as it satisfies the container naming rules enforced by Swift. The value of swift_store_multiple_containers_seed should be taken into account as well.

Related options:
  • swift_store_multiple_containers_seed

  • swift_store_multi_tenant

  • swift_store_create_container_on_put

swift_store_large_object_size
Type

integer

Default

5120

Minimum Value

1

The size threshold, in MB, after which Glance will start segmenting image data.

Swift has an upper limit on the size of a single uploaded object. By default, this is 5GB. To upload objects bigger than this limit, objects are segmented into multiple smaller objects that are tied together with a manifest file. For more detail, refer to https://docs.openstack.org/swift/latest/overview_large_objects.html

This configuration option specifies the size threshold over which the Swift driver will start segmenting image data into multiple smaller files. Currently, the Swift driver only supports creating Dynamic Large Objects.

NOTE: This should be set by taking into account the large object limit enforced by the Swift cluster in consideration.

Possible values:
  • A positive integer that is less than or equal to the large object limit enforced by the Swift cluster in consideration.

Related options:
  • swift_store_large_object_chunk_size

swift_store_large_object_chunk_size
Type

integer

Default

200

Minimum Value

1

The maximum size, in MB, of the segments when image data is segmented.

When image data is segmented to upload images that are larger than the limit enforced by the Swift cluster, image data is broken into segments that are no bigger than the size specified by this configuration option. Refer to swift_store_large_object_size for more detail.

For example: if swift_store_large_object_size is 5GB and swift_store_large_object_chunk_size is 1GB, an image of size 6.2GB will be segmented into 7 segments where the first six segments will be 1GB in size and the seventh segment will be 0.2GB.

Possible values:
  • A positive integer that is less than or equal to the large object limit enforced by Swift cluster in consideration.

Related options:
  • swift_store_large_object_size

swift_store_create_container_on_put
Type

boolean

Default

False

Create container, if it doesn’t already exist, when uploading image.

At the time of uploading an image, if the corresponding container doesn’t exist, it will be created provided this configuration option is set to True. By default, it won’t be created. This behavior is applicable for both single and multiple containers mode.

Possible values:
  • True

  • False

Related options:
  • None

swift_store_multi_tenant
Type

boolean

Default

False

Store images in tenant’s Swift account.

This enables multi-tenant storage mode which causes Glance images to be stored in tenant specific Swift accounts. If this is disabled, Glance stores all images in its own account. More details multi-tenant store can be found at https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage

NOTE: If using multi-tenant swift store, please make sure that you do not set a swift configuration file with the ‘swift_store_config_file’ option.

Possible values:
  • True

  • False

Related options:
  • swift_store_config_file

swift_store_multiple_containers_seed
Type

integer

Default

0

Minimum Value

0

Maximum Value

32

Seed indicating the number of containers to use for storing images.

When using a single-tenant store, images can be stored in one or more than one containers. When set to 0, all images will be stored in one single container. When set to an integer value between 1 and 32, multiple containers will be used to store images. This configuration option will determine how many containers are created. The total number of containers that will be used is equal to 16^N, so if this config option is set to 2, then 16^2=256 containers will be used to store images.

Please refer to swift_store_container for more detail on the naming convention. More detail about using multiple containers can be found at https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-multiple-containers.html

NOTE: This is used only when swift_store_multi_tenant is disabled.

Possible values:
  • A non-negative integer less than or equal to 32

Related options:
  • swift_store_container

  • swift_store_multi_tenant

  • swift_store_create_container_on_put

swift_store_admin_tenants
Type

list

Default

[]

List of tenants that will be granted admin access.

This is a list of tenants that will be granted read/write access on all Swift containers created by Glance in multi-tenant mode. The default value is an empty list.

Possible values:
  • A comma separated list of strings representing UUIDs of Keystone projects/tenants

Related options:
  • None

swift_store_ssl_compression
Type

boolean

Default

True

SSL layer compression for HTTPS Swift requests.

Provide a boolean value to determine whether or not to compress HTTPS Swift requests for images at the SSL layer. By default, compression is enabled.

When using Swift as the backend store for Glance image storage, SSL layer compression of HTTPS Swift requests can be set using this option. If set to False, SSL layer compression of HTTPS Swift requests is disabled. Disabling this option may improve performance for images which are already in a compressed format, for example, qcow2.

Possible values:
  • True

  • False

Related Options:
  • None

swift_store_retry_get_count
Type

integer

Default

0

Minimum Value

0

The number of times a Swift download will be retried before the request fails.

Provide an integer value representing the number of times an image download must be retried before erroring out. The default value is zero (no retry on a failed image download). When set to a positive integer value, swift_store_retry_get_count ensures that the download is attempted this many more times upon a download failure before sending an error message.

Possible values:
  • Zero

  • Positive integer value

Related Options:
  • None

swift_store_expire_soon_interval
Type

integer

Default

60

Minimum Value

0

Time in seconds defining the size of the window in which a new token may be requested before the current token is due to expire.

Typically, the Swift storage driver fetches a new token upon the expiration of the current token to ensure continued access to Swift. However, some Swift transactions (like uploading image segments) may not recover well if the token expires on the fly.

Hence, by fetching a new token before the current token expiration, we make sure that the token does not expire or is close to expiry before a transaction is attempted. By default, the Swift storage driver requests for a new token 60 seconds or less before the current token expiration.

Possible values:
  • Zero

  • Positive integer value

Related Options:
  • None

swift_store_use_trusts
Type

boolean

Default

True

Use trusts for multi-tenant Swift store.

This option instructs the Swift store to create a trust for each add/get request when the multi-tenant store is in use. Using trusts allows the Swift store to avoid problems that can be caused by an authentication token expiring during the upload or download of data.

By default, swift_store_use_trusts is set to True``(use of trusts is enabled). If set to ``False, a user token is used for the Swift connection instead, eliminating the overhead of trust creation.

NOTE: This option is considered only when swift_store_multi_tenant is set to True

Possible values:
  • True

  • False

Related options:
  • swift_store_multi_tenant

swift_buffer_on_upload
Type

boolean

Default

False

Buffer image segments before upload to Swift.

Provide a boolean value to indicate whether or not Glance should buffer image data to disk while uploading to swift. This enables Glance to resume uploads on error.

NOTES: When enabling this option, one should take great care as this increases disk usage on the API node. Be aware that depending upon how the file system is configured, the disk space used for buffering may decrease the actual disk space available for the glance image cache. Disk utilization will cap according to the following equation: (swift_store_large_object_chunk_size * workers * 1000)

Possible values:
  • True

  • False

Related options:
  • swift_upload_buffer_dir

default_swift_reference
Type

string

Default

ref1

Reference to default Swift account/backing store parameters.

Provide a string value representing a reference to the default set of parameters required for using swift account/backing store for image storage. The default reference value for this configuration option is ‘ref1’. This configuration option dereferences the parameters and facilitates image storage in Swift storage backend every time a new image is added.

Possible values:
  • A valid string value

Related options:
  • None

swift_store_auth_version
Type

string

Default

2

Version of the authentication service to use. Valid versions are 2 and 3 for keystone and 1 (deprecated) for swauth and rackspace.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

The option ‘auth_version’ in the Swift back-end configuration file is used instead.

swift_store_auth_address
Type

string

Default

<None>

The address where the Swift authentication service is listening.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

The option ‘auth_address’ in the Swift back-end configuration file is used instead.

swift_store_user
Type

string

Default

<None>

The user to authenticate against the Swift authentication service.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

The option ‘user’ in the Swift back-end configuration file is set instead.

swift_store_key
Type

string

Default

<None>

Auth key for the user authenticating against the Swift authentication service.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

The option ‘key’ in the Swift back-end configuration file is used to set the authentication key instead.

swift_store_config_file
Type

string

Default

<None>

Absolute path to the file containing the swift account(s) configurations.

Include a string value representing the path to a configuration file that has references for each of the configured Swift account(s)/backing stores. By default, no file path is specified and customized Swift referencing is disabled. Configuring this option is highly recommended while using Swift storage backend for image storage as it avoids storage of credentials in the database.

NOTE: Please do not configure this option if you have set swift_store_multi_tenant to True.

Possible values:
  • String value representing an absolute path on the glance-api node

Related options:
  • swift_store_multi_tenant

swift_upload_buffer_dir
Type

string

Default

<None>

Directory to buffer image segments before upload to Swift.

Provide a string value representing the absolute path to the directory on the glance node where image segments will be buffered briefly before they are uploaded to swift.

NOTES:
  • This is required only when the configuration option swift_buffer_on_upload is set to True.

  • This directory should be provisioned keeping in mind the swift_store_large_object_chunk_size and the maximum number of images that could be uploaded simultaneously by a given glance node.

Possible values:
  • String value representing an absolute directory path

Related options:
  • swift_buffer_on_upload

  • swift_store_large_object_chunk_size

vmware_server_host
Type

host address

Default

127.0.0.1

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Address of the ESX/ESXi or vCenter Server target system.

This configuration option sets the address of the ESX/ESXi or vCenter Server target system. This option is required when using the VMware storage backend. The address can contain an IP address (127.0.0.1) or a DNS name (www.my-domain.com).

Possible Values:
  • A valid IPv4 or IPv6 address

  • A valid DNS name

Related options:
  • vmware_server_username

  • vmware_server_password

vmware_server_username
Type

string

Default

root

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Server username.

This configuration option takes the username for authenticating with the VMware ESX/ESXi or vCenter Server. This option is required when using the VMware storage backend.

Possible Values:
  • Any string that is the username for a user with appropriate privileges

Related options:
  • vmware_server_host

  • vmware_server_password

vmware_server_password
Type

string

Default

vmware

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Server password.

This configuration option takes the password for authenticating with the VMware ESX/ESXi or vCenter Server. This option is required when using the VMware storage backend.

Possible Values:
  • Any string that is a password corresponding to the username specified using the “vmware_server_username” option

Related options:
  • vmware_server_host

  • vmware_server_username

vmware_api_retry_count
Type

integer

Default

10

Minimum Value

1

The number of VMware API retries.

This configuration option specifies the number of times the VMware ESX/VC server API must be retried upon connection related issues or server API call overload. It is not possible to specify ‘retry forever’.

Possible Values:
  • Any positive integer value

Related options:
  • None

vmware_task_poll_interval
Type

integer

Default

5

Minimum Value

1

Interval in seconds used for polling remote tasks invoked on VMware ESX/VC server.

This configuration option takes in the sleep time in seconds for polling an on-going async task as part of the VMWare ESX/VC server API call.

Possible Values:
  • Any positive integer value

Related options:
  • None

vmware_store_image_dir
Type

string

Default

/openstack_glance

The directory where the glance images will be stored in the datastore.

This configuration option specifies the path to the directory where the glance images will be stored in the VMware datastore. If this option is not set, the default directory where the glance images are stored is openstack_glance.

Possible Values:
  • Any string that is a valid path to a directory

Related options:
  • None

vmware_insecure
Type

boolean

Default

False

Set verification of the ESX/vCenter server certificate.

This configuration option takes a boolean value to determine whether or not to verify the ESX/vCenter server certificate. If this option is set to True, the ESX/vCenter server certificate is not verified. If this option is set to False, then the default CA truststore is used for verification.

This option is ignored if the “vmware_ca_file” option is set. In that case, the ESX/vCenter server certificate will then be verified using the file specified using the “vmware_ca_file” option .

Possible Values:
  • True

  • False

Related options:
  • vmware_ca_file

Deprecated Variations

Group

Name

glance_store

vmware_api_insecure

vmware_ca_file
Type

string

Default

/etc/ssl/certs/ca-certificates.crt

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Absolute path to the CA bundle file.

This configuration option enables the operator to use a custom Cerificate Authority File to verify the ESX/vCenter certificate.

If this option is set, the “vmware_insecure” option will be ignored and the CA file specified will be used to authenticate the ESX/vCenter server certificate and establish a secure connection to the server.

Possible Values:
  • Any string that is a valid absolute path to a CA file

Related options:
  • vmware_insecure

vmware_datastores
Type

multi-valued

Default

''

The datastores where the image can be stored.

This configuration option specifies the datastores where the image can be stored in the VMWare store backend. This option may be specified multiple times for specifying multiple datastores. The datastore name should be specified after its datacenter path, separated by “:”. An optional weight may be given after the datastore name, separated again by “:” to specify the priority. Thus, the required format becomes <datacenter_path>:<datastore_name>:<optional_weight>.

When adding an image, the datastore with highest weight will be selected, unless there is not enough free space available in cases where the image size is already known. If no weight is given, it is assumed to be zero and the directory will be considered for selection last. If multiple datastores have the same weight, then the one with the most free space available is selected.

Possible Values:
  • Any string of the format: <datacenter_path>:<datastore_name>:<optional_weight>

Related options:
  • None

oslo_concurrency

disable_process_locking
Type

boolean

Default

False

Enables or disables inter-process locks.

Deprecated Variations

Group

Name

DEFAULT

disable_process_locking

lock_path
Type

string

Default

<None>

Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, a lock path must be set.

Deprecated Variations

Group

Name

DEFAULT

lock_path

oslo_policy

enforce_scope
Type

boolean

Default

False

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

enforce_new_defaults
Type

boolean

Default

False

This option controls whether or not to use old deprecated defaults when evaluating policies. If True, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with the enforce_scope flag so that you can get the benefits of new defaults and scope_type together

policy_file
Type

string

Default

policy.json

The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.

Deprecated Variations

Group

Name

DEFAULT

policy_file

policy_default_rule
Type

string

Default

default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations

Group

Name

DEFAULT

policy_default_rule

policy_dirs
Type

multi-valued

Default

policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations

Group

Name

DEFAULT

policy_dirs

remote_content_type
Type

string

Default

application/x-www-form-urlencoded

Valid Values

application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt
Type

boolean

Default

False

server identity verification for REST based policy check

remote_ssl_ca_crt_file
Type

string

Default

<None>

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file
Type

string

Default

<None>

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file
Type

string

Default

<None>

Absolute path client key file REST based policy check