ironic-inspector.conf

DEFAULT

listen_address
Type

string

Default

0.0.0.0

IP to listen on.

listen_port
Type

port number

Default

5050

Minimum Value

0

Maximum Value

65535

Port to listen on.

host
Type

string

Default

localhost

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Name of this node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address. However, the node name must be valid within an AMQP key, and if using ZeroMQ, a valid hostname, FQDN, or IP address.

auth_strategy
Type

string

Default

keystone

Valid Values

keystone, noauth

Authentication method used on the ironic-inspector API. Either “noauth” or “keystone” are currently valid options. “noauth” will disable all authentication.

timeout
Type

integer

Default

3600

Maximum Value

315576000

Timeout after which introspection is considered failed, set to 0 to disable.

clean_up_period
Type

integer

Default

60

Amount of time in seconds, after which repeat clean up of timed out nodes and old nodes status information.

use_ssl
Type

boolean

Default

False

SSL Enabled/Disabled

max_concurrency
Type

integer

Default

1000

Minimum Value

2

The green thread pool size.

introspection_delay
Type

integer

Default

5

Delay (in seconds) between two introspections. Only applies when boot is managed by ironic-inspector (i.e. manage_boot==True).

ipmi_address_fields
Type

list

Default

['ilo_address', 'drac_host', 'drac_address', 'cimc_address']

Ironic driver_info fields that are equivalent to ipmi_address.

rootwrap_config
Type

string

Default

/etc/ironic-inspector/rootwrap.conf

Path to the rootwrap configuration file to use for running commands as root

api_max_limit
Type

integer

Default

1000

Minimum Value

1

Limit the number of elements an API list-call returns

can_manage_boot
Type

boolean

Default

True

Whether the current installation of ironic-inspector can manage PXE booting of nodes. If set to False, the API will reject introspection requests with manage_boot missing or set to True.

enable_mdns
Type

boolean

Default

False

Whether to enable publishing the ironic-inspector API endpoint via multicast DNS.

standalone
Type

boolean

Default

True

Whether to run ironic-inspector as a standalone service. It’s EXPERIMENTAL to set to False.

debug
Type

boolean

Default

False

Mutable

This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append
Type

string

Default

<None>

Mutable

This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

Deprecated Variations

Group

Name

DEFAULT

log-config

DEFAULT

log_config

log_date_format
Type

string

Default

%Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file
Type

string

Default

<None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations

Group

Name

DEFAULT

logfile

log_dir
Type

string

Default

<None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations

Group

Name

DEFAULT

logdir

watch_log_file
Type

boolean

Default

False

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog
Type

boolean

Default

False

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal
Type

boolean

Default

False

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility
Type

string

Default

LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json
Type

boolean

Default

False

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr
Type

boolean

Default

False

Log output to standard error. This option is ignored if log_config_append is set.

use_eventlog
Type

boolean

Default

False

Log output to Windows Event Log.

log_rotate_interval
Type

integer

Default

1

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is set to “interval”.

log_rotate_interval_type
Type

string

Default

days

Valid Values

Seconds, Minutes, Hours, Days, Weekday, Midnight

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

max_logfile_count
Type

integer

Default

30

Maximum number of rotated log files.

max_logfile_size_mb
Type

integer

Default

200

Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.

log_rotation_type
Type

string

Default

none

Valid Values

interval, size, none

Log rotation type.

Possible values

interval

Rotate logs at predefined time intervals.

size

Rotate logs once they reach a predefined size.

none

Do not rotate log files.

logging_context_format_string
Type

string

Default

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string
Type

string

Default

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix
Type

string

Default

%(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix
Type

string

Default

%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format
Type

string

Default

%(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

default_log_levels
Type

list

Default

['sqlalchemy=WARNING', 'iso8601=WARNING', 'requests=WARNING', 'urllib3.connectionpool=WARNING', 'keystonemiddleware=WARNING', 'keystoneauth=WARNING', 'ironicclient=WARNING', 'amqp=WARNING', 'amqplib=WARNING', 'oslo.messaging=WARNING', 'oslo_messaging=WARNING']

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors
Type

boolean

Default

False

Enables or disables publication of error events.

instance_format
Type

string

Default

"[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format
Type

string

Default

"[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval
Type

integer

Default

0

Interval, number of seconds, of log rate limiting.

rate_limit_burst
Type

integer

Default

0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level
Type

string

Default

CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations
Type

boolean

Default

False

Enables or disables fatal status of deprecations.

rpc_conn_pool_size
Type

integer

Default

30

Minimum Value

1

Size of RPC connection pool.

Deprecated Variations

Group

Name

DEFAULT

rpc_conn_pool_size

conn_pool_min_size
Type

integer

Default

2

The pool size limit for connections expiration policy

conn_pool_ttl
Type

integer

Default

1200

The time-to-live in sec of idle connections in the pool

executor_thread_pool_size
Type

integer

Default

64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations

Group

Name

DEFAULT

rpc_thread_pool_size

rpc_response_timeout
Type

integer

Default

60

Seconds to wait for a response from a call.

transport_url
Type

string

Default

rabbit://

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

control_exchange
Type

string

Default

openstack

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

rpc_ping_enabled
Type

boolean

Default

False

Add an endpoint to answer to ping calls. Endpoint is named oslo_rpc_server_ping

backdoor_port
Type

string

Default

<None>

Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.

backdoor_socket
Type

string

Default

<None>

Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with ‘backdoor_port’ in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option. Inside the path {pid} will be replaced with the PID of the current process.

log_options
Type

boolean

Default

True

Enables or disables logging values of all registered options when starting a service (at DEBUG level).

graceful_shutdown_timeout
Type

integer

Default

60

Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.

api_paste_config
Type

string

Default

api-paste.ini

File name for the paste.deploy config for api service

wsgi_log_format
Type

string

Default

%(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f

A python format string that is used as the template to generate log lines. The following values can beformatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.

tcp_keepidle
Type

integer

Default

600

Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not supported on OS X.

wsgi_default_pool_size
Type

integer

Default

100

Size of the pool of greenthreads used by wsgi

max_header_line
Type

integer

Default

16384

Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated when keystone is configured to use PKI tokens with big service catalogs).

wsgi_keep_alive
Type

boolean

Default

True

If False, closes the client socket connection explicitly.

client_socket_timeout
Type

integer

Default

900

Timeout for client connections’ socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value of ‘0’ means wait forever.

wsgi_server_debug
Type

boolean

Default

False

True if the server should send exception tracebacks to the clients on 500 errors. If False, the server will respond with empty bodies.

capabilities

boot_mode
Type

boolean

Default

False

Whether to store the boot mode (BIOS or UEFI).

cpu_flags
Type

dict

Default

{'vmx': 'cpu_vt', 'svm': 'cpu_vt', 'aes': 'cpu_aes', 'pse': 'cpu_hugepages', 'pdpe1gb': 'cpu_hugepages_1g', 'smx': 'cpu_txt'}

Mapping between a CPU flag and a capability to set if this flag is present.

coordination

backend_url
Type

string

Default

memcached://localhost:11211

The backend URL to use for distributed coordination. EXPERIMENTAL.

cors

allowed_origin
Type

list

Default

<None>

Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com

allow_credentials
Type

boolean

Default

True

Indicate that the actual request can include user credentials

expose_headers
Type

list

Default

[]

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age
Type

integer

Default

3600

Maximum cache age of CORS preflight requests.

allow_methods
Type

list

Default

['GET', 'POST', 'PUT', 'HEAD', 'PATCH', 'DELETE', 'OPTIONS']

Indicate which methods can be used during the actual request.

allow_headers
Type

list

Default

['X-Auth-Token', 'X-OpenStack-Ironic-Inspector-API-Minimum-Version', 'X-OpenStack-Ironic-Inspector-API-Maximum-Version', 'X-OpenStack-Ironic-Inspector-API-Version']

Indicate which header field names may be used during the actual request.

database

sqlite_synchronous
Type

boolean

Default

True

If True, SQLite uses synchronous mode.

Deprecated Variations

Group

Name

DEFAULT

sqlite_synchronous

backend
Type

string

Default

sqlalchemy

The back end to use for the database.

Deprecated Variations

Group

Name

DEFAULT

db_backend

connection
Type

string

Default

<None>

The SQLAlchemy connection string to use to connect to the database.

Deprecated Variations

Group

Name

DEFAULT

sql_connection

DATABASE

sql_connection

sql

connection

slave_connection
Type

string

Default

<None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode
Type

string

Default

TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

mysql_enable_ndb
Type

boolean

Default

False

If True, transparently enables support for handling MySQL Cluster (NDB).

connection_recycle_time
Type

integer

Default

3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

max_pool_size
Type

integer

Default

5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

max_retries
Type

integer

Default

10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

Deprecated Variations

Group

Name

DEFAULT

sql_max_retries

DATABASE

sql_max_retries

retry_interval
Type

integer

Default

10

Interval between retries of opening a SQL connection.

Deprecated Variations

Group

Name

DEFAULT

sql_retry_interval

DATABASE

reconnect_interval

max_overflow
Type

integer

Default

50

If set, use this value for max_overflow with SQLAlchemy.

Deprecated Variations

Group

Name

DEFAULT

sql_max_overflow

DATABASE

sqlalchemy_max_overflow

connection_debug
Type

integer

Default

0

Minimum Value

0

Maximum Value

100

Verbosity of SQL debugging information: 0=None, 100=Everything.

Deprecated Variations

Group

Name

DEFAULT

sql_connection_debug

connection_trace
Type

boolean

Default

False

Add Python stack traces to SQL as comment strings.

Deprecated Variations

Group

Name

DEFAULT

sql_connection_trace

pool_timeout
Type

integer

Default

<None>

If set, use this value for pool_timeout with SQLAlchemy.

Deprecated Variations

Group

Name

DATABASE

sqlalchemy_pool_timeout

use_db_reconnect
Type

boolean

Default

False

Enable the experimental use of database reconnect on connection lost.

db_retry_interval
Type

integer

Default

1

Seconds between retries of a database transaction.

db_inc_retry_interval
Type

boolean

Default

True

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval
Type

integer

Default

10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries
Type

integer

Default

20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

connection_parameters
Type

string

Default

''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

discovery

enroll_node_driver
Type

string

Default

fake-hardware

The name of the Ironic driver used by the enroll hook when creating a new node in Ironic.

enabled_bmc_address_version
Type

list

Default

['4', '6']

IP version of BMC address that will be used when enrolling a new node in Ironic. Defaults to “4,6”. Could be “4” (use v4 address only), “4,6” (v4 address have higher priority and if both addresses found v6 version is ignored), “6,4” (v6 is desired but fall back to v4 address for BMCs having v4 address, opposite to “4,6”), “6” (use v6 address only and ignore v4 version).

dnsmasq_pxe_filter

dhcp_hostsdir
Type

string

Default

/var/lib/ironic-inspector/dhcp-hostsdir

The MAC address cache directory, exposed to dnsmasq.This directory is expected to be in exclusive control of the driver.

purge_dhcp_hostsdir
Type

boolean

Default

True

Purge the hostsdir upon driver initialization. Setting to false should only be performed when the deployment of inspector is such that there are multiple processes executing inside of the same host and namespace. In this case, the Operator is responsible for setting up a custom cleaning facility.

dnsmasq_start_command
Type

string

Default

''

A (shell) command line to start the dnsmasq service upon filter initialization. Default: don’t start.

dnsmasq_stop_command
Type

string

Default

''

A (shell) command line to stop the dnsmasq service upon inspector (error) exit. Default: don’t stop.

iptables

dnsmasq_interface
Type

string

Default

br-ctlplane

Interface on which dnsmasq listens, the default is for VM’s.

firewall_chain
Type

string

Default

ironic-inspector

iptables chain name to use.

ethoib_interfaces
Type

list

Default

[]

List of Etherent Over InfiniBand interfaces on the Inspector host which are used for physical access to the DHCP network. Multiple interfaces would be attached to a bond or bridge specified in dnsmasq_interface. The MACs of the InfiniBand nodes which are not in desired state are going to be blacklisted based on the list of neighbor MACs on these interfaces.

ip_version
Type

string

Default

4

Valid Values

4, 6

The IP version that will be used for iptables filter. Defaults to 4.

Possible values

4

IPv4

6

IPv6

ironic

auth_url
Type

unknown type

Default

<None>

Authentication URL

auth_type
Type

unknown type

Default

<None>

Authentication type to load

Deprecated Variations

Group

Name

ironic

auth_plugin

cafile
Type

string

Default

<None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile
Type

string

Default

<None>

PEM encoded client certificate cert file

collect_timing
Type

boolean

Default

False

Collect per-API call timing information.

connect_retries
Type

integer

Default

<None>

The maximum number of retries that should be attempted for connection errors.

connect_retry_delay
Type

floating point

Default

<None>

Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

default_domain_id
Type

unknown type

Default

<None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name
Type

unknown type

Default

<None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

domain_id
Type

unknown type

Default

<None>

Domain ID to scope to

domain_name
Type

unknown type

Default

<None>

Domain name to scope to

endpoint_override
Type

string

Default

<None>

Always use this endpoint URL for requests for this client. NOTE: The unversioned endpoint should be specified here; to request a particular API version, use the version, min-version, and/or max-version options.

insecure
Type

boolean

Default

False

Verify HTTPS connections.

keyfile
Type

string

Default

<None>

PEM encoded client certificate key file

max_version
Type

string

Default

<None>

The maximum major version of a given API, intended to be used as the upper bound of a range with min_version. Mutually exclusive with version.

max_retries
Type

integer

Default

30

Maximum number of retries in case of conflict error (HTTP 409).

min_version
Type

string

Default

<None>

The minimum major version of a given API, intended to be used as the lower bound of a range with max_version. Mutually exclusive with version. If min_version is given with no max_version it is as if max version is “latest”.

password
Type

unknown type

Default

<None>

User’s password

project_domain_id
Type

unknown type

Default

<None>

Domain ID containing project

project_domain_name
Type

unknown type

Default

<None>

Domain name containing project

project_id
Type

unknown type

Default

<None>

Project ID to scope to

Deprecated Variations

Group

Name

ironic

tenant-id

ironic

tenant_id

project_name
Type

unknown type

Default

<None>

Project name to scope to

Deprecated Variations

Group

Name

ironic

tenant-name

ironic

tenant_name

region_name
Type

string

Default

<None>

The default region_name for endpoint URL discovery.

retry_interval
Type

integer

Default

2

Interval between retries in case of conflict error (HTTP 409).

service_name
Type

string

Default

<None>

The default service_name for endpoint URL discovery.

service_type
Type

string

Default

baremetal

The default service_type for endpoint URL discovery.

split_loggers
Type

boolean

Default

False

Log requests to multiple loggers.

status_code_retries
Type

integer

Default

<None>

The maximum number of retries that should be attempted for retriable HTTP status codes.

status_code_retry_delay
Type

floating point

Default

<None>

Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

system_scope
Type

unknown type

Default

<None>

Scope for system operations

tenant_id
Type

unknown type

Default

<None>

Tenant ID

tenant_name
Type

unknown type

Default

<None>

Tenant Name

timeout
Type

integer

Default

<None>

Timeout value for http requests

trust_id
Type

unknown type

Default

<None>

Trust ID

user_domain_id
Type

unknown type

Default

<None>

User’s domain id

user_domain_name
Type

unknown type

Default

<None>

User’s domain name

user_id
Type

unknown type

Default

<None>

User id

username
Type

unknown type

Default

<None>

Username

Deprecated Variations

Group

Name

ironic

user-name

ironic

user_name

valid_interfaces
Type

list

Default

['internal', 'public']

List of interfaces, in order of preference, for endpoint URL.

version
Type

string

Default

<None>

Minimum Major API version within a given Major API version for endpoint URL discovery. Mutually exclusive with min_version and max_version

keystone_authtoken

www_authenticate_uri
Type

string

Default

<None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

Deprecated Variations

Group

Name

keystone_authtoken

auth_uri

auth_uri
Type

string

Default

<None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

Warning

This option is deprecated for removal since Queens. Its value may be silently ignored in the future.

Reason

The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

auth_version
Type

string

Default

<None>

API version of the Identity API endpoint.

interface
Type

string

Default

internal

Interface to use for the Identity API endpoint. Valid values are “public”, “internal” (default) or “admin”.

delay_auth_decision
Type

boolean

Default

False

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

http_connect_timeout
Type

integer

Default

<None>

Request timeout value for communicating with Identity API server.

http_request_max_retries
Type

integer

Default

3

How many times are we trying to reconnect when communicating with Identity API Server.

cache
Type

string

Default

<None>

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

certfile
Type

string

Default

<None>

Required if identity server requires client certificate

keyfile
Type

string

Default

<None>

Required if identity server requires client certificate

cafile
Type

string

Default

<None>

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

insecure
Type

boolean

Default

False

Verify HTTPS connections.

region_name
Type

string

Default

<None>

The region in which the identity server can be found.

memcached_servers
Type

list

Default

<None>

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

Deprecated Variations

Group

Name

keystone_authtoken

memcache_servers

token_cache_time
Type

integer

Default

300

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

memcache_security_strategy
Type

string

Default

None

Valid Values

None, MAC, ENCRYPT

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_secret_key
Type

string

Default

<None>

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_pool_dead_retry
Type

integer

Default

300

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize
Type

integer

Default

10

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout
Type

integer

Default

3

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout
Type

integer

Default

60

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_pool_conn_get_timeout
Type

integer

Default

10

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_use_advanced_pool
Type

boolean

Default

True

(Optional) Use the advanced (eventlet safe) memcached client pool.

include_service_catalog
Type

boolean

Default

True

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

enforce_token_bind
Type

string

Default

permissive

Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

service_token_roles
Type

list

Default

['service']

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required
Type

boolean

Default

False

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

service_type
Type

string

Default

<None>

The name or type of the service as it appears in the service catalog. This is used to validate tokens that have restricted access rules.

auth_type
Type

unknown type

Default

<None>

Authentication type to load

Deprecated Variations

Group

Name

keystone_authtoken

auth_plugin

auth_section
Type

unknown type

Default

<None>

Config Section from which to load plugin specific options

mdns

registration_attempts
Type

integer

Default

5

Minimum Value

1

Number of attempts to register a service. Currently has to be larger than 1 because of race conditions in the zeroconf library.

lookup_attempts
Type

integer

Default

3

Minimum Value

1

Number of attempts to lookup a service.

params
Type

unknown type

Default

{}

Additional parameters to pass for the registered service.

interfaces
Type

list

Default

<None>

List of IP addresses of interfaces to use for mDNS. Defaults to all interfaces on the system.

oslo_messaging_amqp

container_name
Type

string

Default

<None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations

Group

Name

amqp1

container_name

idle_timeout
Type

integer

Default

0

Timeout for inactive connections (in seconds)

Deprecated Variations

Group

Name

amqp1

idle_timeout

trace
Type

boolean

Default

False

Debug: dump AMQP frames to stdout

Deprecated Variations

Group

Name

amqp1

trace

ssl
Type

boolean

Default

False

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file
Type

string

Default

''

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations

Group

Name

amqp1

ssl_ca_file

ssl_cert_file
Type

string

Default

''

Self-identifying certificate PEM file for client authentication

Deprecated Variations

Group

Name

amqp1

ssl_cert_file

ssl_key_file
Type

string

Default

''

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations

Group

Name

amqp1

ssl_key_file

ssl_key_password
Type

string

Default

<None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations

Group

Name

amqp1

ssl_key_password

ssl_verify_vhost
Type

boolean

Default

False

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

sasl_mechanisms
Type

string

Default

''

Space separated list of acceptable SASL mechanisms

Deprecated Variations

Group

Name

amqp1

sasl_mechanisms

sasl_config_dir
Type

string

Default

''

Path to directory that contains the SASL configuration

Deprecated Variations

Group

Name

amqp1

sasl_config_dir

sasl_config_name
Type

string

Default

''

Name of configuration file (without .conf suffix)

Deprecated Variations

Group

Name

amqp1

sasl_config_name

sasl_default_realm
Type

string

Default

''

SASL realm to use if no realm present in username

connection_retry_interval
Type

integer

Default

1

Minimum Value

1

Seconds to pause before attempting to re-connect.

connection_retry_backoff
Type

integer

Default

2

Minimum Value

0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max
Type

integer

Default

30

Minimum Value

1

Maximum limit for connection_retry_interval + connection_retry_backoff

Type

integer

Default

10

Minimum Value

1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry
Type

integer

Default

0

Minimum Value

-1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout
Type

integer

Default

30

Minimum Value

5

The deadline for an rpc reply message delivery.

default_send_timeout
Type

integer

Default

30

Minimum Value

5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout
Type

integer

Default

30

Minimum Value

5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

Type

integer

Default

600

Minimum Value

1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode
Type

string

Default

dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost
Type

boolean

Default

True

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix
Type

string

Default

exclusive

address prefix used when sending to a specific server

Deprecated Variations

Group

Name

amqp1

server_request_prefix

broadcast_prefix
Type

string

Default

broadcast

address prefix used when broadcasting to all servers

Deprecated Variations

Group

Name

amqp1

broadcast_prefix

group_request_prefix
Type

string

Default

unicast

address prefix when sending to any server in group

Deprecated Variations

Group

Name

amqp1

group_request_prefix

rpc_address_prefix
Type

string

Default

openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix
Type

string

Default

openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address
Type

string

Default

multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address
Type

string

Default

unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address
Type

string

Default

anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange
Type

string

Default

<None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange
Type

string

Default

<None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

Type

integer

Default

200

Minimum Value

1

Window size for incoming RPC Reply messages.

rpc_server_credit
Type

integer

Default

100

Minimum Value

1

Window size for incoming RPC Request messages

notify_server_credit
Type

integer

Default

100

Minimum Value

1

Window size for incoming Notification messages

pre_settled
Type

multi-valued

Default

rpc-cast

Default

rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

oslo_messaging_kafka

kafka_max_fetch_bytes
Type

integer

Default

1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout
Type

floating point

Default

1.0

Default timeout(s) for Kafka consumers

pool_size
Type

integer

Default

10

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

Driver no longer uses connection pool.

conn_pool_min_size
Type

integer

Default

2

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

Driver no longer uses connection pool.

conn_pool_ttl
Type

integer

Default

1200

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

Driver no longer uses connection pool.

consumer_group
Type

string

Default

oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout
Type

floating point

Default

0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size
Type

integer

Default

16384

Size of batch for the producer async send

compression_codec
Type

string

Default

none

Valid Values

none, gzip, snappy, lz4, zstd

The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version

enable_auto_commit
Type

boolean

Default

False

Enable asynchronous consumer commits

max_poll_records
Type

integer

Default

500

The maximum number of records returned in a poll call

security_protocol
Type

string

Default

PLAINTEXT

Valid Values

PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL

Protocol used to communicate with brokers

sasl_mechanism
Type

string

Default

PLAIN

Mechanism when security protocol is SASL

ssl_cafile
Type

string

Default

''

CA certificate PEM file used to verify the server certificate

ssl_client_cert_file
Type

string

Default

''

Client certificate PEM file used for authentication.

ssl_client_key_file
Type

string

Default

''

Client key PEM file used for authentication.

ssl_client_key_password
Type

string

Default

''

Client key password file used for authentication.

oslo_messaging_notifications

driver
Type

multi-valued

Default

''

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations

Group

Name

DEFAULT

notification_driver

transport_url
Type

string

Default

<None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations

Group

Name

DEFAULT

notification_transport_url

topics
Type

list

Default

['notifications']

AMQP topic used for OpenStack notifications.

Deprecated Variations

Group

Name

rpc_notifier2

topics

DEFAULT

notification_topics

retry
Type

integer

Default

-1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

oslo_messaging_rabbit

amqp_durable_queues
Type

boolean

Default

False

Use durable queues in AMQP. If rabbit_quorum_queue is enabled, queues will be durable and this value will be ignored.

amqp_auto_delete
Type

boolean

Default

False

Auto-delete queues in AMQP.

Deprecated Variations

Group

Name

DEFAULT

amqp_auto_delete

ssl
Type

boolean

Default

False

Connect over SSL.

Deprecated Variations

Group

Name

oslo_messaging_rabbit

rabbit_use_ssl

ssl_version
Type

string

Default

''

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_ssl_version

ssl_key_file
Type

string

Default

''

SSL key file (valid only if SSL enabled).

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_ssl_keyfile

ssl_cert_file
Type

string

Default

''

SSL cert file (valid only if SSL enabled).

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_ssl_certfile

ssl_ca_file
Type

string

Default

''

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_ssl_ca_certs

ssl_enforce_fips_mode
Type

boolean

Default

False

Global toggle for enforcing the OpenSSL FIPS mode. This feature requires Python support. This is available in Python 3.9 in all environments and may have been backported to older Python versions on select environments. If the Python executable used does not support OpenSSL FIPS mode, an exception will be raised.

heartbeat_in_pthread
Type

boolean

Default

True

Run the health check heartbeat thread through a native python thread by default. If this option is equal to False then the health check heartbeat will inherit the execution model from the parent process. For example if the parent process has monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread.

kombu_reconnect_delay
Type

floating point

Default

1.0

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations

Group

Name

DEFAULT

kombu_reconnect_delay

kombu_compression
Type

string

Default

<None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout
Type

integer

Default

60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_reconnect_timeout

kombu_failover_strategy
Type

string

Default

round-robin

Valid Values

round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_login_method
Type

string

Default

AMQPLAIN

Valid Values

PLAIN, AMQPLAIN, EXTERNAL, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations

Group

Name

DEFAULT

rabbit_login_method

rabbit_retry_interval
Type

integer

Default

1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff
Type

integer

Default

2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations

Group

Name

DEFAULT

rabbit_retry_backoff

rabbit_interval_max
Type

integer

Default

30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_ha_queues
Type

boolean

Default

False

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations

Group

Name

DEFAULT

rabbit_ha_queues

rabbit_quorum_queue
Type

boolean

Default

False

Use quorum queues in RabbitMQ (x-queue-type: quorum). The quorum queue is a modern queue type for RabbitMQ implementing a durable, replicated FIFO queue based on the Raft consensus algorithm. It is available as of RabbitMQ 3.8.0. If set this option will conflict with the HA queues (rabbit_ha_queues) aka mirrored queues, in other words the HA queues should be disabled, quorum queues durable by default so the amqp_durable_queues opion is ignored when this option enabled.

rabbit_transient_queues_ttl
Type

integer

Default

1800

Minimum Value

1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count
Type

integer

Default

0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold
Type

integer

Default

60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).

heartbeat_rate
Type

integer

Default

2

How often times during the heartbeat_timeout_threshold we check the heartbeat.

direct_mandatory_flag
Type

boolean

Default

True

(DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.MessageUndeliverable exception will be used to loop for a timeout to lets a chance to sender to recover.This flag is deprecated and it will not be possible to deactivate this functionality anymore

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

Mandatory flag no longer deactivable.

enable_cancel_on_failover
Type

boolean

Default

False

Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and notify consumerswhen queue is down

oslo_policy

enforce_scope
Type

boolean

Default

False

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

enforce_new_defaults
Type

boolean

Default

False

This option controls whether or not to use old deprecated defaults when evaluating policies. If True, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with the enforce_scope flag so that you can get the benefits of new defaults and scope_type together. If False, the deprecated policy check string is logically OR’d with the new policy check string, allowing for a graceful upgrade experience between releases with new policies, which is the default behavior.

policy_file
Type

string

Default

policy.json

The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.

Deprecated Variations

Group

Name

DEFAULT

policy_file

policy_default_rule
Type

string

Default

default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations

Group

Name

DEFAULT

policy_default_rule

policy_dirs
Type

multi-valued

Default

policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations

Group

Name

DEFAULT

policy_dirs

remote_content_type
Type

string

Default

application/x-www-form-urlencoded

Valid Values

application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt
Type

boolean

Default

False

server identity verification for REST based policy check

remote_ssl_ca_crt_file
Type

string

Default

<None>

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file
Type

string

Default

<None>

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file
Type

string

Default

<None>

Absolute path client key file REST based policy check

pci_devices

alias
Type

multi-valued

Default

''

An alias for PCI device identified by ‘vendor_id’ and ‘product_id’ fields. Format: {“vendor_id”: “1234”, “product_id”: “5678”, “name”: “pci_dev1”}

processing

add_ports
Type

string

Default

pxe

Valid Values

all, active, pxe, disabled

Which MAC addresses to add as ports during introspection. Possible values: all (all MAC addresses), active (MAC addresses of NIC with IP addresses), pxe (only MAC address of NIC node PXE booted from, falls back to “active” if PXE MAC is not supplied by the ramdisk).

keep_ports
Type

string

Default

all

Valid Values

all, present, added

Which ports (already present on a node) to keep after introspection. Possible values: all (do not delete anything), present (keep ports which MACs were present in introspection data), added (keep only MACs that we added during introspection).

overwrite_existing
Type

boolean

Default

True

Whether to overwrite existing values in node database. Disable this option to make introspection a non-destructive operation.

default_processing_hooks
Type

string

Default

ramdisk_error,root_disk_selection,scheduler,validate_interfaces,capabilities,pci_devices

Comma-separated list of default hooks for processing pipeline. Hook ‘scheduler’ updates the node with the minimum properties required by the Nova scheduler. Hook ‘validate_interfaces’ ensures that valid NIC data was provided by the ramdisk. Do not exclude these two unless you really know what you’re doing.

processing_hooks
Type

string

Default

$default_processing_hooks

Comma-separated list of enabled hooks for processing pipeline. The default for this is $default_processing_hooks, hooks can be added before or after the defaults like this: “prehook,$default_processing_hooks,posthook”.

ramdisk_logs_dir
Type

string

Default

<None>

If set, logs from ramdisk will be stored in this directory.

always_store_ramdisk_logs
Type

boolean

Default

False

Whether to store ramdisk logs even if it did not return an error message (dependent upon “ramdisk_logs_dir” option being set).

node_not_found_hook
Type

string

Default

<None>

The name of the hook to run when inspector receives inspection information from a node it isn’t already aware of. This hook is ignored by default.

store_data
Type

string

Default

none

The storage backend for storing introspection data. Possible values are: ‘none’, ‘database’ and ‘swift’. If set to ‘none’, introspection data will not be stored.

disk_partitioning_spacing
Type

boolean

Default

True

Whether to leave 1 GiB of disk size untouched for partitioning. Only has effect when used with the IPA as a ramdisk, for older ramdisk local_gb is calculated on the ramdisk side.

ramdisk_logs_filename_format
Type

string

Default

{uuid}_{dt:%Y%m%d-%H%M%S.%f}.tar.gz

File name template for storing ramdisk logs. The following replacements can be used: {uuid} - node UUID or “unknown”, {bmc} - node BMC address or “unknown”, {dt} - current UTC date and time, {mac} - PXE booting MAC or “unknown”.

power_off
Type

boolean

Default

True

Whether to power off a node after introspection.Nodes in active or rescue states which submit introspection data will be left on if the feature is enabled via the ‘permit_active_introspection’ configuration option.

permit_active_introspection
Type

boolean

Default

False

Whether to process nodes that are in running states.

pxe_filter

driver
Type

string

Default

iptables

PXE boot filter driver to use, possible filters are: “iptables”, “dnsmasq” and “noop”. Set “noop ” to disable the firewall filtering.

sync_period
Type

integer

Default

15

Minimum Value

0

Amount of time in seconds, after which repeat periodic update of the filter.

service_catalog

auth_url
Type

unknown type

Default

<None>

Authentication URL

auth_type
Type

unknown type

Default

<None>

Authentication type to load

Deprecated Variations

Group

Name

service_catalog

auth_plugin

cafile
Type

string

Default

<None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile
Type

string

Default

<None>

PEM encoded client certificate cert file

collect_timing
Type

boolean

Default

False

Collect per-API call timing information.

connect_retries
Type

integer

Default

<None>

The maximum number of retries that should be attempted for connection errors.

connect_retry_delay
Type

floating point

Default

<None>

Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

default_domain_id
Type

unknown type

Default

<None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name
Type

unknown type

Default

<None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

domain_id
Type

unknown type

Default

<None>

Domain ID to scope to

domain_name
Type

unknown type

Default

<None>

Domain name to scope to

endpoint_override
Type

string

Default

<None>

Always use this endpoint URL for requests for this client. NOTE: The unversioned endpoint should be specified here; to request a particular API version, use the version, min-version, and/or max-version options.

insecure
Type

boolean

Default

False

Verify HTTPS connections.

keyfile
Type

string

Default

<None>

PEM encoded client certificate key file

max_version
Type

string

Default

<None>

The maximum major version of a given API, intended to be used as the upper bound of a range with min_version. Mutually exclusive with version.

min_version
Type

string

Default

<None>

The minimum major version of a given API, intended to be used as the lower bound of a range with max_version. Mutually exclusive with version. If min_version is given with no max_version it is as if max version is “latest”.

password
Type

unknown type

Default

<None>

User’s password

project_domain_id
Type

unknown type

Default

<None>

Domain ID containing project

project_domain_name
Type

unknown type

Default

<None>

Domain name containing project

project_id
Type

unknown type

Default

<None>

Project ID to scope to

Deprecated Variations

Group

Name

service_catalog

tenant-id

service_catalog

tenant_id

project_name
Type

unknown type

Default

<None>

Project name to scope to

Deprecated Variations

Group

Name

service_catalog

tenant-name

service_catalog

tenant_name

region_name
Type

string

Default

<None>

The default region_name for endpoint URL discovery.

service_name
Type

string

Default

<None>

The default service_name for endpoint URL discovery.

service_type
Type

string

Default

baremetal-introspection

The default service_type for endpoint URL discovery.

split_loggers
Type

boolean

Default

False

Log requests to multiple loggers.

status_code_retries
Type

integer

Default

<None>

The maximum number of retries that should be attempted for retriable HTTP status codes.

status_code_retry_delay
Type

floating point

Default

<None>

Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

system_scope
Type

unknown type

Default

<None>

Scope for system operations

tenant_id
Type

unknown type

Default

<None>

Tenant ID

tenant_name
Type

unknown type

Default

<None>

Tenant Name

timeout
Type

integer

Default

<None>

Timeout value for http requests

trust_id
Type

unknown type

Default

<None>

Trust ID

user_domain_id
Type

unknown type

Default

<None>

User’s domain id

user_domain_name
Type

unknown type

Default

<None>

User’s domain name

user_id
Type

unknown type

Default

<None>

User id

username
Type

unknown type

Default

<None>

Username

Deprecated Variations

Group

Name

service_catalog

user-name

service_catalog

user_name

valid_interfaces
Type

list

Default

['internal', 'public']

List of interfaces, in order of preference, for endpoint URL.

version
Type

string

Default

<None>

Minimum Major API version within a given Major API version for endpoint URL discovery. Mutually exclusive with min_version and max_version

ssl

ca_file
Type

string

Default

<None>

CA certificate file to use to verify connecting clients.

Deprecated Variations

Group

Name

DEFAULT

ssl_ca_file

cert_file
Type

string

Default

<None>

Certificate file to use when starting the server securely.

Deprecated Variations

Group

Name

DEFAULT

ssl_cert_file

key_file
Type

string

Default

<None>

Private key file to use when starting the server securely.

Deprecated Variations

Group

Name

DEFAULT

ssl_key_file

version
Type

string

Default

<None>

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

ciphers
Type

string

Default

<None>

Sets the list of available ciphers. value should be a string in the OpenSSL cipher list format.

swift

auth_url
Type

unknown type

Default

<None>

Authentication URL

auth_type
Type

unknown type

Default

<None>

Authentication type to load

Deprecated Variations

Group

Name

swift

auth_plugin

cafile
Type

string

Default

<None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile
Type

string

Default

<None>

PEM encoded client certificate cert file

collect_timing
Type

boolean

Default

False

Collect per-API call timing information.

connect_retries
Type

integer

Default

<None>

The maximum number of retries that should be attempted for connection errors.

connect_retry_delay
Type

floating point

Default

<None>

Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

container
Type

string

Default

ironic-inspector

Default Swift container to use when creating objects.

default_domain_id
Type

unknown type

Default

<None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name
Type

unknown type

Default

<None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

delete_after
Type

integer

Default

0

Number of seconds that the Swift object will last before being deleted. (set to 0 to never delete the object).

domain_id
Type

unknown type

Default

<None>

Domain ID to scope to

domain_name
Type

unknown type

Default

<None>

Domain name to scope to

endpoint_override
Type

string

Default

<None>

Always use this endpoint URL for requests for this client. NOTE: The unversioned endpoint should be specified here; to request a particular API version, use the version, min-version, and/or max-version options.

insecure
Type

boolean

Default

False

Verify HTTPS connections.

keyfile
Type

string

Default

<None>

PEM encoded client certificate key file

max_version
Type

string

Default

<None>

The maximum major version of a given API, intended to be used as the upper bound of a range with min_version. Mutually exclusive with version.

max_retries
Type

integer

Default

<None>

This option is deprecated and has no effect.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

min_version
Type

string

Default

<None>

The minimum major version of a given API, intended to be used as the lower bound of a range with max_version. Mutually exclusive with version. If min_version is given with no max_version it is as if max version is “latest”.

password
Type

unknown type

Default

<None>

User’s password

project_domain_id
Type

unknown type

Default

<None>

Domain ID containing project

project_domain_name
Type

unknown type

Default

<None>

Domain name containing project

project_id
Type

unknown type

Default

<None>

Project ID to scope to

Deprecated Variations

Group

Name

swift

tenant-id

swift

tenant_id

project_name
Type

unknown type

Default

<None>

Project name to scope to

Deprecated Variations

Group

Name

swift

tenant-name

swift

tenant_name

region_name
Type

string

Default

<None>

The default region_name for endpoint URL discovery.

service_name
Type

string

Default

<None>

The default service_name for endpoint URL discovery.

service_type
Type

string

Default

object-store

The default service_type for endpoint URL discovery.

split_loggers
Type

boolean

Default

False

Log requests to multiple loggers.

status_code_retries
Type

integer

Default

<None>

The maximum number of retries that should be attempted for retriable HTTP status codes.

status_code_retry_delay
Type

floating point

Default

<None>

Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

system_scope
Type

unknown type

Default

<None>

Scope for system operations

tenant_id
Type

unknown type

Default

<None>

Tenant ID

tenant_name
Type

unknown type

Default

<None>

Tenant Name

timeout
Type

integer

Default

<None>

Timeout value for http requests

trust_id
Type

unknown type

Default

<None>

Trust ID

user_domain_id
Type

unknown type

Default

<None>

User’s domain id

user_domain_name
Type

unknown type

Default

<None>

User’s domain name

user_id
Type

unknown type

Default

<None>

User id

username
Type

unknown type

Default

<None>

Username

Deprecated Variations

Group

Name

swift

user-name

swift

user_name

valid_interfaces
Type

list

Default

['internal', 'public']

List of interfaces, in order of preference, for endpoint URL.

version
Type

string

Default

<None>

Minimum Major API version within a given Major API version for endpoint URL discovery. Mutually exclusive with min_version and max_version