Sample Configuration File¶
The following is a sample Ironic configuration for adaptation and use. For a detailed overview of all available configuration options, refer to Configuration Options.
The sample configuration can also be viewed in file form
.
Important
The sample configuration file is auto-generated from Ironic when this documentation is built. You must ensure your version of Ironic matches the version of this documentation.
[DEFAULT]
#
# From ironic
#
# Authentication strategy used by ironic-api. "noauth" should
# not be used in a production environment because all
# authentication will be disabled. (string value)
# Possible values:
# noauth - no authentication
# keystone - use the Identity service for authentication
# http_basic - HTTP basic authentication
#auth_strategy = keystone
# Path to Apache format user authentication file used when
# auth_strategy=http_basic (string value)
#http_basic_auth_user_file = /etc/ironic/htpasswd
# Return server tracebacks in the API response for any error
# responses. WARNING: this is insecure and should not be used
# in a production environment. (boolean value)
#debug_tracebacks_in_api = false
# Enable pecan debug mode. WARNING: this is insecure and
# should not be used in a production environment. (boolean
# value)
#pecan_debug = false
# Resource class to use for new nodes when no resource class
# is provided in the creation request. (string value)
# Note: This option can be changed without restarting.
#default_resource_class = <None>
# Specify the list of hardware types to load during service
# initialization. Missing hardware types, or hardware types
# which fail to initialize, will prevent the conductor service
# from starting. This option defaults to a recommended set of
# production-oriented hardware types. A complete list of
# hardware types present on your system may be found by
# enumerating the "ironic.hardware.types" entrypoint. (list
# value)
#enabled_hardware_types = ipmi,redfish
# Specify the list of bios interfaces to load during service
# initialization. Missing bios interfaces, or bios interfaces
# which fail to initialize, will prevent the ironic-conductor
# service from starting. At least one bios interface that is
# supported by each enabled hardware type must be enabled
# here, or the ironic-conductor service will not start. Must
# not be an empty list. The default value is a recommended set
# of production-oriented bios interfaces. A complete list of
# bios interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.bios"
# entrypoint. When setting this value, please make sure that
# every enabled hardware type will have the same set of
# enabled bios interfaces on every ironic-conductor service.
# (list value)
#enabled_bios_interfaces = no-bios,redfish
# Default bios interface to be used for nodes that do not have
# bios_interface field set. A complete list of bios interfaces
# present on your system may be found by enumerating the
# "ironic.hardware.interfaces.bios" entrypoint. (string value)
#default_bios_interface = <None>
# Specify the list of boot interfaces to load during service
# initialization. Missing boot interfaces, or boot interfaces
# which fail to initialize, will prevent the ironic-conductor
# service from starting. At least one boot interface that is
# supported by each enabled hardware type must be enabled
# here, or the ironic-conductor service will not start. Must
# not be an empty list. The default value is a recommended set
# of production-oriented boot interfaces. A complete list of
# boot interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.boot"
# entrypoint. When setting this value, please make sure that
# every enabled hardware type will have the same set of
# enabled boot interfaces on every ironic-conductor service.
# (list value)
#enabled_boot_interfaces = ipxe,pxe,redfish-virtual-media
# Default boot interface to be used for nodes that do not have
# boot_interface field set. A complete list of boot interfaces
# present on your system may be found by enumerating the
# "ironic.hardware.interfaces.boot" entrypoint. (string value)
#default_boot_interface = <None>
# Specify the list of console interfaces to load during
# service initialization. Missing console interfaces, or
# console interfaces which fail to initialize, will prevent
# the ironic-conductor service from starting. At least one
# console interface that is supported by each enabled hardware
# type must be enabled here, or the ironic-conductor service
# will not start. Must not be an empty list. The default value
# is a recommended set of production-oriented console
# interfaces. A complete list of console interfaces present on
# your system may be found by enumerating the
# "ironic.hardware.interfaces.console" entrypoint. When
# setting this value, please make sure that every enabled
# hardware type will have the same set of enabled console
# interfaces on every ironic-conductor service. (list value)
#enabled_console_interfaces = no-console
# Default console interface to be used for nodes that do not
# have console_interface field set. A complete list of console
# interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.console"
# entrypoint. (string value)
#default_console_interface = <None>
# Specify the list of deploy interfaces to load during service
# initialization. Missing deploy interfaces, or deploy
# interfaces which fail to initialize, will prevent the
# ironic-conductor service from starting. At least one deploy
# interface that is supported by each enabled hardware type
# must be enabled here, or the ironic-conductor service will
# not start. Must not be an empty list. The default value is a
# recommended set of production-oriented deploy interfaces. A
# complete list of deploy interfaces present on your system
# may be found by enumerating the
# "ironic.hardware.interfaces.deploy" entrypoint. When setting
# this value, please make sure that every enabled hardware
# type will have the same set of enabled deploy interfaces on
# every ironic-conductor service. (list value)
#enabled_deploy_interfaces = direct,ramdisk
# Default deploy interface to be used for nodes that do not
# have deploy_interface field set. A complete list of deploy
# interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.deploy"
# entrypoint. (string value)
#default_deploy_interface = <None>
# Specify the list of inspect interfaces to load during
# service initialization. Missing inspect interfaces, or
# inspect interfaces which fail to initialize, will prevent
# the ironic-conductor service from starting. At least one
# inspect interface that is supported by each enabled hardware
# type must be enabled here, or the ironic-conductor service
# will not start. Must not be an empty list. The default value
# is a recommended set of production-oriented inspect
# interfaces. A complete list of inspect interfaces present on
# your system may be found by enumerating the
# "ironic.hardware.interfaces.inspect" entrypoint. When
# setting this value, please make sure that every enabled
# hardware type will have the same set of enabled inspect
# interfaces on every ironic-conductor service. (list value)
#enabled_inspect_interfaces = no-inspect,redfish
# Default inspect interface to be used for nodes that do not
# have inspect_interface field set. A complete list of inspect
# interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.inspect"
# entrypoint. (string value)
#default_inspect_interface = <None>
# Specify the list of management interfaces to load during
# service initialization. Missing management interfaces, or
# management interfaces which fail to initialize, will prevent
# the ironic-conductor service from starting. At least one
# management interface that is supported by each enabled
# hardware type must be enabled here, or the ironic-conductor
# service will not start. Must not be an empty list. The
# default value is a recommended set of production-oriented
# management interfaces. A complete list of management
# interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.management"
# entrypoint. When setting this value, please make sure that
# every enabled hardware type will have the same set of
# enabled management interfaces on every ironic-conductor
# service. (list value)
#enabled_management_interfaces = <None>
# Default management interface to be used for nodes that do
# not have management_interface field set. A complete list of
# management interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.management"
# entrypoint. (string value)
#default_management_interface = <None>
# Specify the list of network interfaces to load during
# service initialization. Missing network interfaces, or
# network interfaces which fail to initialize, will prevent
# the ironic-conductor service from starting. At least one
# network interface that is supported by each enabled hardware
# type must be enabled here, or the ironic-conductor service
# will not start. Must not be an empty list. The default value
# is a recommended set of production-oriented network
# interfaces. A complete list of network interfaces present on
# your system may be found by enumerating the
# "ironic.hardware.interfaces.network" entrypoint. When
# setting this value, please make sure that every enabled
# hardware type will have the same set of enabled network
# interfaces on every ironic-conductor service. (list value)
#enabled_network_interfaces = flat,noop
# Default network interface to be used for nodes that do not
# have network_interface field set. A complete list of network
# interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.network"
# entrypoint. (string value)
#default_network_interface = <None>
# Specify the list of power interfaces to load during service
# initialization. Missing power interfaces, or power
# interfaces which fail to initialize, will prevent the
# ironic-conductor service from starting. At least one power
# interface that is supported by each enabled hardware type
# must be enabled here, or the ironic-conductor service will
# not start. Must not be an empty list. The default value is a
# recommended set of production-oriented power interfaces. A
# complete list of power interfaces present on your system may
# be found by enumerating the
# "ironic.hardware.interfaces.power" entrypoint. When setting
# this value, please make sure that every enabled hardware
# type will have the same set of enabled power interfaces on
# every ironic-conductor service. (list value)
#enabled_power_interfaces = <None>
# Default power interface to be used for nodes that do not
# have power_interface field set. A complete list of power
# interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.power"
# entrypoint. (string value)
#default_power_interface = <None>
# Specify the list of raid interfaces to load during service
# initialization. Missing raid interfaces, or raid interfaces
# which fail to initialize, will prevent the ironic-conductor
# service from starting. At least one raid interface that is
# supported by each enabled hardware type must be enabled
# here, or the ironic-conductor service will not start. Must
# not be an empty list. The default value is a recommended set
# of production-oriented raid interfaces. A complete list of
# raid interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.raid"
# entrypoint. When setting this value, please make sure that
# every enabled hardware type will have the same set of
# enabled raid interfaces on every ironic-conductor service.
# (list value)
#enabled_raid_interfaces = agent,no-raid,redfish
# Default raid interface to be used for nodes that do not have
# raid_interface field set. A complete list of raid interfaces
# present on your system may be found by enumerating the
# "ironic.hardware.interfaces.raid" entrypoint. (string value)
#default_raid_interface = <None>
# Specify the list of rescue interfaces to load during service
# initialization. Missing rescue interfaces, or rescue
# interfaces which fail to initialize, will prevent the
# ironic-conductor service from starting. At least one rescue
# interface that is supported by each enabled hardware type
# must be enabled here, or the ironic-conductor service will
# not start. Must not be an empty list. The default value is a
# recommended set of production-oriented rescue interfaces. A
# complete list of rescue interfaces present on your system
# may be found by enumerating the
# "ironic.hardware.interfaces.rescue" entrypoint. When setting
# this value, please make sure that every enabled hardware
# type will have the same set of enabled rescue interfaces on
# every ironic-conductor service. (list value)
#enabled_rescue_interfaces = no-rescue
# Default rescue interface to be used for nodes that do not
# have rescue_interface field set. A complete list of rescue
# interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.rescue"
# entrypoint. (string value)
#default_rescue_interface = <None>
# Specify the list of storage interfaces to load during
# service initialization. Missing storage interfaces, or
# storage interfaces which fail to initialize, will prevent
# the ironic-conductor service from starting. At least one
# storage interface that is supported by each enabled hardware
# type must be enabled here, or the ironic-conductor service
# will not start. Must not be an empty list. The default value
# is a recommended set of production-oriented storage
# interfaces. A complete list of storage interfaces present on
# your system may be found by enumerating the
# "ironic.hardware.interfaces.storage" entrypoint. When
# setting this value, please make sure that every enabled
# hardware type will have the same set of enabled storage
# interfaces on every ironic-conductor service. (list value)
#enabled_storage_interfaces = cinder,noop
# Default storage interface to be used for nodes that do not
# have storage_interface field set. A complete list of storage
# interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.storage"
# entrypoint. (string value)
#default_storage_interface = noop
# Specify the list of vendor interfaces to load during service
# initialization. Missing vendor interfaces, or vendor
# interfaces which fail to initialize, will prevent the
# ironic-conductor service from starting. At least one vendor
# interface that is supported by each enabled hardware type
# must be enabled here, or the ironic-conductor service will
# not start. Must not be an empty list. The default value is a
# recommended set of production-oriented vendor interfaces. A
# complete list of vendor interfaces present on your system
# may be found by enumerating the
# "ironic.hardware.interfaces.vendor" entrypoint. When setting
# this value, please make sure that every enabled hardware
# type will have the same set of enabled vendor interfaces on
# every ironic-conductor service. (list value)
#enabled_vendor_interfaces = ipmitool,redfish,no-vendor
# Default vendor interface to be used for nodes that do not
# have vendor_interface field set. A complete list of vendor
# interfaces present on your system may be found by
# enumerating the "ironic.hardware.interfaces.vendor"
# entrypoint. (string value)
#default_vendor_interface = <None>
# Max number of characters of any node
# last_error/maintenance_reason pushed to database. (integer
# value)
#log_in_db_max_size = 4096
# Exponent to determine number of hash partitions to use when
# distributing load across conductors. Larger values will
# result in more even distribution of load and less load when
# rebalancing the ring, but more memory usage. Number of
# partitions per conductor is (2^hash_partition_exponent).
# This determines the granularity of rebalancing: given 10
# hosts, and an exponent of the 2, there are 40 partitions in
# the ring.A few thousand partitions should make rebalancing
# smooth in most cases. The default is suitable for up to a
# few hundred conductors. Configuring for too many partitions
# has a negative impact on CPU usage. (integer value)
#hash_partition_exponent = 5
# Time (in seconds) after which the hash ring is considered
# outdated and is refreshed on the next access. (integer
# value)
#hash_ring_reset_interval = 15
# If True, convert backing images to "raw" disk image format.
# (boolean value)
# Note: This option can be changed without restarting.
#force_raw_images = true
# The scale factor used for estimating the size of a raw image
# converted from compact image formats such as QCOW2. Default
# is 2.0, must be greater than 1.0. (floating point value)
# Minimum value: 1.0
#raw_image_growth_factor = 2.0
# Path to isolinux binary file. (string value)
#isolinux_bin = /usr/lib/syslinux/isolinux.bin
# Template file for isolinux configuration file. (string
# value)
#isolinux_config_template = $pybasedir/common/isolinux_config.template
# GRUB2 configuration file location on the UEFI ISO images
# produced by ironic. The default value is usually incorrect
# and should not be relied on. If you use a GRUB2 image from a
# certain distribution, use a distribution-specific path here,
# e.g. EFI/ubuntu/grub.cfg (string value)
#grub_config_path = EFI/BOOT/grub.cfg
# Template file for grub configuration file. (string value)
#grub_config_template = $pybasedir/common/grub_conf.template
# Path to ldlinux.c32 file. This file is required for syslinux
# 5.0 or later. If not specified, the file is looked for in
# "/usr/lib/syslinux/modules/bios/ldlinux.c32" and
# "/usr/share/syslinux/ldlinux.c32". (string value)
#ldlinux_c32 = <None>
# Path to EFI System Partition image file. This file is
# recommended for creating UEFI bootable ISO images
# efficiently. ESP image should contain a
# FAT12/16/32-formatted file system holding EFI boot loaders
# (e.g. GRUB2) for each hardware architecture ironic needs to
# boot. This option is only used when neither ESP nor ISO
# deploy image is configured to the node being deployed in
# which case ironic will attempt to fetch ESP image from the
# configured location or extract ESP image from UEFI-bootable
# deploy ISO image. (string value)
#esp_image = <None>
# DEPRECATED: Run image downloads and raw format conversions
# in parallel. (boolean value)
# Note: This option can be changed without restarting.
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Use image_download_concurrency
#parallel_image_downloads = true
# How many image downloads and raw format conversions to run
# in parallel. Only affects image caches. (integer value)
# Minimum value: 1
#image_download_concurrency = 20
# IPv4 address of this host. If unset, will determine the IP
# programmatically. If unable to do so, will use "127.0.0.1".
# NOTE: This field does accept an IPv6 address as an override
# for templates and URLs, however it is recommended that
# [DEFAULT]my_ipv6 is used along with DNS names for service
# URLs for dual-stack environments. (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#my_ip = 127.0.0.1
# IP address of this host using IPv6. This value must be
# supplied via the configuration and cannot be adequately
# programmatically determined like the [DEFAULT]my_ip
# parameter for IPv4. (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#my_ipv6 = 2001:db8::1
# Specifies the minimum level for which to send notifications.
# If not set, no notifications will be sent. The default is
# for this option to be unset. (string value)
# Possible values:
# debug - "debug" level
# info - "info" level
# warning - "warning" level
# error - "error" level
# critical - "critical" level
#notification_level = <None>
#
# Specifies the topics for the versioned notifications issued
# by Ironic.
#
# The default value is fine for most deployments and rarely
# needs to be changed.
# However, if you have a third-party service that consumes
# versioned
# notifications, it might be worth getting a topic for that
# service.
# Ironic will send a message containing a versioned
# notification payload to each
# topic queue in this list.
#
# The list of versioned notifications is visible in
# https://docs.openstack.org/ironic/latest/admin/notifications.html
# (list value)
#versioned_notifications_topics = ironic_versioned_notifications
# Directory where the ironic python module is installed.
# (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#pybasedir = /usr/lib/python/site-packages/ironic/ironic
# Directory where ironic binaries are installed. (string
# value)
#bindir = $pybasedir/bin
# Top-level directory for maintaining ironic's state. (string
# value)
#state_path = $pybasedir
# Default mode for portgroups. Allowed values can be found in
# the linux kernel documentation on bonding:
# https://www.kernel.org/doc/Documentation/networking/bonding.txt.
# (string value)
# Note: This option can be changed without restarting.
#default_portgroup_mode = active-backup
# Name of this node. This can be an opaque identifier. It is
# not necessarily a hostname, FQDN, or IP address. However,
# the node name must be valid within an AMQP key, and if using
# ZeroMQ (will be removed in the Stein release), a valid
# hostname, FQDN, or IP address. (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#host = localhost
# Used for rolling upgrades. Setting this option downgrades
# (or pins) the Bare Metal API, the internal ironic RPC
# communication, and the database objects to their respective
# versions, so they are compatible with older services. When
# doing a rolling upgrade from version N to version N+1, set
# (to pin) this to N. To unpin (default), leave it unset and
# the latest versions will be used. (string value)
# Possible values:
# zed - "zed" release
# yoga - "yoga" release
# antelope - "antelope" release
# 9.2 - "9.2" release
# 21.4 - "21.4" release
# 21.3 - "21.3" release
# 21.2 - "21.2" release
# 21.1 - "21.1" release
# 21.0 - "21.0" release
# 2023.1 - "2023.1" release
# 20.2 - "20.2" release
# 20.1 - "20.1" release
# 20.0 - "20.0" release
# 19.0 - "19.0" release
# 18.2 - "18.2" release
# 18.1 - "18.1" release
# 18.0 - "18.0" release
# 17.0 - "17.0" release
# 16.2 - "16.2" release
# 16.1 - "16.1" release
# 16.0 - "16.0" release
# 15.1 - "15.1" release
# 15.0 - "15.0" release
# 14.0 - "14.0" release
# 13.0 - "13.0" release
# 12.2 - "12.2" release
# 12.1 - "12.1" release
# 12.0 - "12.0" release
# 11.1 - "11.1" release
# 11.0 - "11.0" release
# 10.1 - "10.1" release
# 10.0 - "10.0" release
# Note: This option can be changed without restarting.
#pin_release_version = <None>
# Which RPC transport implementation to use between conductor
# and API services (string value)
# Possible values:
# oslo - use oslo.messaging transport
# json-rpc - use JSON RPC transport
# none - No RPC, only use local conductor
#rpc_transport = oslo
# Setting to govern if Ironic should only warn instead of
# attempting to hold back the request in order to prevent the
# exhaustion of system memory. (boolean value)
# Note: This option can be changed without restarting.
#minimum_memory_warning_only = false
# Minimum memory in MiB for the system to have available prior
# to starting a memory intensive process on the conductor.
# (integer value)
# Note: This option can be changed without restarting.
#minimum_required_memory = 1024
# Seconds to wait between retries for free memory before
# launching the process. This, combined with
# ``memory_wait_retries`` allows the conductor to determine
# how long we should attempt to directly retry. (integer
# value)
# Note: This option can be changed without restarting.
#minimum_memory_wait_time = 15
# Number of retries to hold onto the worker before failing or
# returning the thread to the pool if the conductor can
# automatically retry. (integer value)
# Note: This option can be changed without restarting.
#minimum_memory_wait_retries = 6
# Path to the rootwrap configuration file to use for running
# commands as root. (string value)
#rootwrap_config = /etc/ironic/rootwrap.conf
# Temporary working directory, default is Python temp dir.
# (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#tempdir = /tmp
# CA certificates to be used for certificate verification.
# This can be either a Boolean value or a path to a CA_BUNDLE
# file.If set to True, the certificates present in the
# standard path are used to verify the host certificates.If
# set to False, the conductor will ignore verifying the SSL
# certificate presented by the host.If it"s a path, conductor
# uses the specified certificate for SSL verification. If the
# path does not exist, the behavior is same as when this value
# is set to True i.e the certificates present in the standard
# path are used for SSL verification.Defaults to True. (string
# value)
# Note: This option can be changed without restarting.
#webserver_verify_ca = True
# Connection timeout when accessing remote web servers with
# images. (integer value)
#webserver_connection_timeout = 60
# Enable elevated access for users with service role belonging
# to the 'rbac_service_project_name' project when using
# default policy. The default setting of disabled causes all
# service role requests to be scoped to the project the
# service account belongs to. (boolean value)
#rbac_service_role_elevated_access = false
# The project name utilized for Role Based Access Control
# checks for the reserved `service` project. This project is
# utilized for services to have accounts for cross-service
# communication. Often these accounts require higher levels of
# access, and effectively this permits accounts from the
# service to not be restricted to project scoping of
# responses. i.e. The service project user with a `service`
# role will be able to see nodes across all projects, similar
# to System scoped access. If not set to a value, and all
# service role access will be filtered matching an `owner` or
# `lessee`, if applicable. If an operator wishes to make
# behavior visible for all service role users across all
# projects, then a custom policy must be used to override the
# default "service_role" rule. It should be noted that the
# value of "service" is a default convention for OpenStack
# deployments, but the requsite access and details around end
# configuration are largely up to an operator if they are
# doing an OpenStack deployment manually. (string value)
#rbac_service_project_name = service
# Hash function to use when building the hash ring. If running
# on a FIPS system, do not use md5. WARNING: all ironic
# services in a cluster MUST use the same algorithm at all
# times. Changing the algorithm requires an offline update.
# (string value)
# Possible values:
# sha256 - <No description provided>
# sha512 - <No description provided>
# sha1 - <No description provided>
# shake_128 - <No description provided>
# sha3_256 - <No description provided>
# shake_256 - <No description provided>
# sha3_224 - <No description provided>
# sha224 - <No description provided>
# blake2s - <No description provided>
# sha3_384 - <No description provided>
# sha384 - <No description provided>
# md5 - <No description provided>
# blake2b - <No description provided>
# sha3_512 - <No description provided>
# Advanced Option: intended for advanced users and not used
# by the majority of users, and might have a significant
# effect on stability and/or performance.
#hash_ring_algorithm = md5
#
# From oslo.log
#
# If set to true, the logging level will be set to DEBUG
# instead of the default INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false
# The name of a logging configuration file. This file is
# appended to any existing logging configuration files. For
# details about logging configuration files, see the Python
# logging module documentation. Note that when logging
# configuration files are used then all logging configuration
# is set in the configuration file and other logging
# configuration options are ignored (for example, log-date-
# format). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>
# Defines the format string for %%(asctime)s in log records.
# Default: %(default)s . This option is ignored if
# log_config_append is set. (string value)
#log_date_format = %Y-%m-%d %H:%M:%S
# (Optional) Name of log file to send logging output to. If no
# default is set, logging will go to stderr as defined by
# use_stderr. This option is ignored if log_config_append is
# set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>
# (Optional) The base directory used for relative log_file
# paths. This option is ignored if log_config_append is set.
# (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>
# Uses logging handler designed to watch file system. When log
# file is moved or removed this handler will open a new log
# file with specified path instantaneously. It makes sense
# only if log_file option is specified and Linux platform is
# used. This option is ignored if log_config_append is set.
# (boolean value)
#watch_log_file = false
# Use syslog for logging. Existing syslog format is DEPRECATED
# and will be changed later to honor RFC5424. This option is
# ignored if log_config_append is set. (boolean value)
#use_syslog = false
# Enable journald for logging. If running in a systemd
# environment you may wish to enable journal support. Doing so
# will use the journal native protocol which includes
# structured metadata in addition to log messages.This option
# is ignored if log_config_append is set. (boolean value)
#use_journal = false
# Syslog facility to receive log lines. This option is ignored
# if log_config_append is set. (string value)
#syslog_log_facility = LOG_USER
# Use JSON formatting for logging. This option is ignored if
# log_config_append is set. (boolean value)
#use_json = false
# Log output to standard error. This option is ignored if
# log_config_append is set. (boolean value)
#use_stderr = false
# Log output to Windows Event Log. (boolean value)
#use_eventlog = false
# The amount of time before the log files are rotated. This
# option is ignored unless log_rotation_type is set to
# "interval". (integer value)
#log_rotate_interval = 1
# Rotation interval type. The time of the last file change (or
# the time when the service was started) is used when
# scheduling the next rotation. (string value)
# Possible values:
# Seconds - <No description provided>
# Minutes - <No description provided>
# Hours - <No description provided>
# Days - <No description provided>
# Weekday - <No description provided>
# Midnight - <No description provided>
#log_rotate_interval_type = days
# Maximum number of rotated log files. (integer value)
#max_logfile_count = 30
# Log file maximum size in MB. This option is ignored if
# "log_rotation_type" is not set to "size". (integer value)
#max_logfile_size_mb = 200
# Log rotation type. (string value)
# Possible values:
# interval - Rotate logs at predefined time intervals.
# size - Rotate logs once they reach a predefined size.
# none - Do not rotate log files.
#log_rotation_type = none
# Format string to use for log messages with context. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s
# Format string to use for log messages when context is
# undefined. Used by oslo_log.formatters.ContextFormatter
# (string value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
# Additional data to append to log message when logging level
# for the message is DEBUG. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
# Prefix each line of exception output with this format. Used
# by oslo_log.formatters.ContextFormatter (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
# Defines the format string for %(user_identity)s that is used
# in logging_context_format_string. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_user_identity_format = %(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s
# List of package logging levels in logger=LEVEL pairs. This
# option is ignored if log_config_append is set. (list value)
#default_log_levels = amqp=WARNING,amqplib=WARNING,qpid.messaging=INFO,oslo.messaging=INFO,oslo_messaging=INFO,sqlalchemy=WARNING,stevedore=INFO,eventlet.wsgi.server=INFO,iso8601=WARNING,requests=WARNING,glanceclient=WARNING,urllib3.connectionpool=WARNING,keystonemiddleware.auth_token=INFO,keystoneauth.session=INFO,openstack=WARNING,oslo_policy=WARNING,oslo_concurrency.lockutils=WARNING
# Enables or disables publication of error events. (boolean
# value)
#publish_errors = false
# The format for an instance that is passed with the log
# message. (string value)
#instance_format = "[instance: %(uuid)s] "
# The format for an instance UUID that is passed with the log
# message. (string value)
#instance_uuid_format = "[instance: %(uuid)s] "
# Interval, number of seconds, of log rate limiting. (integer
# value)
#rate_limit_interval = 0
# Maximum number of logged messages per rate_limit_interval.
# (integer value)
#rate_limit_burst = 0
# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
# WARNING, DEBUG or empty string. Logs with level greater or
# equal to rate_limit_except_level are not filtered. An empty
# string means that all levels are filtered. (string value)
#rate_limit_except_level = CRITICAL
# Enables or disables fatal status of deprecations. (boolean
# value)
#fatal_deprecations = false
#
# From oslo.messaging
#
# Size of RPC connection pool. (integer value)
# Minimum value: 1
#rpc_conn_pool_size = 30
# The pool size limit for connections expiration policy
# (integer value)
#conn_pool_min_size = 2
# The time-to-live in sec of idle connections in the pool
# (integer value)
#conn_pool_ttl = 1200
# Size of executor thread pool when executor is threading or
# eventlet. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64
# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60
# The network address and optional user credentials for
# connecting to the messaging backend, in URL format. The
# expected format is:
#
# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
#
# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
#
# For full details on the fields in the URL see the
# documentation of oslo_messaging.TransportURL at
# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
# (string value)
#transport_url = rabbit://
# The default exchange under which topics are scoped. May be
# overridden by an exchange name specified in the
# transport_url option. (string value)
#control_exchange = openstack
# Add an endpoint to answer to ping calls. Endpoint is named
# oslo_rpc_server_ping (boolean value)
#rpc_ping_enabled = false
#
# From oslo.service.periodic_task
#
# Some periodic tasks can be run in a separate process. Should
# we run them here? (boolean value)
#run_external_periodic_tasks = true
#
# From oslo.service.service
#
# Enable eventlet backdoor. Acceptable values are 0, <port>,
# and <start>:<end>, where 0 results in listening on a random
# tcp port number; <port> results in listening on the
# specified port number (and not enabling backdoor if that
# port is in use); and <start>:<end> results in listening on
# the smallest unused port number within the specified range
# of port numbers. The chosen port is displayed in the
# service's log file. (string value)
#backdoor_port = <None>
# Enable eventlet backdoor, using the provided path as a unix
# socket that can receive connections. This option is mutually
# exclusive with 'backdoor_port' in that only one should be
# provided. If both are provided then the existence of this
# option overrides the usage of that option. Inside the path
# {pid} will be replaced with the PID of the current process.
# (string value)
#backdoor_socket = <None>
# Enables or disables logging values of all registered options
# when starting a service (at DEBUG level). (boolean value)
#log_options = true
# Specify a timeout after which a gracefully shutdown server
# will exit. Zero value means endless wait. (integer value)
#graceful_shutdown_timeout = 60
[agent]
#
# From ironic
#
# Whether Ironic will manage booting of the agent ramdisk. If
# set to False, you will need to configure your mechanism to
# allow booting the agent ramdisk. (boolean value)
#manage_agent_boot = true
# The memory size in MiB consumed by agent when it is booted
# on a bare metal node. This is used for checking if the image
# can be downloaded and deployed on the bare metal node after
# booting agent ramdisk. This may be set according to the
# memory consumed by the agent ramdisk image. (integer value)
# Note: This option can be changed without restarting.
#memory_consumed_by_agent = 0
# Whether the agent ramdisk should stream raw images directly
# onto the disk or not. By streaming raw images directly onto
# the disk the agent ramdisk will not spend time copying the
# image to a tmpfs partition (therefore consuming less memory)
# prior to writing it to the disk. Unless the disk where the
# image will be copied to is really slow, this option should
# be set to True. Defaults to True. (boolean value)
# Note: This option can be changed without restarting.
#stream_raw_images = true
# Number of times to retry getting power state to check if
# bare metal node has been powered off after a soft power off.
# (integer value)
#post_deploy_get_power_state_retries = 6
# Amount of time (in seconds) to wait between polling power
# state after trigger soft poweroff. (integer value)
#post_deploy_get_power_state_retry_interval = 5
# API version to use for communicating with the ramdisk agent.
# (string value)
#agent_api_version = v1
# Whether Ironic should collect the deployment logs on
# deployment failure (on_failure), always or never. (string
# value)
# Possible values:
# always - always collect the logs
# on_failure - only collect logs if there is a failure
# never - never collect logs
# Note: This option can be changed without restarting.
#deploy_logs_collect = on_failure
# The name of the storage backend where the logs will be
# stored. (string value)
# Possible values:
# local - store the logs locally
# swift - store the logs in Object Storage service
# Note: This option can be changed without restarting.
#deploy_logs_storage_backend = local
# The path to the directory where the logs should be stored,
# used when the deploy_logs_storage_backend is configured to
# "local". (string value)
# Note: This option can be changed without restarting.
#deploy_logs_local_path = /var/log/ironic/deploy
# The name of the Swift container to store the logs, used when
# the deploy_logs_storage_backend is configured to "swift".
# (string value)
# Note: This option can be changed without restarting.
#deploy_logs_swift_container = ironic_deploy_logs_container
# Number of days before a log object is marked as expired in
# Swift. If None, the logs will be kept forever or until
# manually deleted. Used when the deploy_logs_storage_backend
# is configured to "swift". (integer value)
# Note: This option can be changed without restarting.
#deploy_logs_swift_days_to_expire = 30
# Specifies whether direct deploy interface should try to use
# the image source directly or if ironic should cache the
# image on the conductor and serve it from ironic's own http
# server. (string value)
# Possible values:
# swift - IPA ramdisk retrieves instance image from the Object
# Storage service.
# http - IPA ramdisk retrieves instance image from HTTP
# service served at conductor nodes.
# local - Same as "http", but HTTP images are also cached
# locally, converted and served from the conductor
# Note: This option can be changed without restarting.
#image_download_source = http
# Timeout (in seconds) for IPA commands. (integer value)
# Note: This option can be changed without restarting.
#command_timeout = 60
# This is the maximum number of attempts that will be done for
# IPA commands that fails due to network problems. (integer
# value)
#max_command_attempts = 3
# Number of attempts to check for asynchronous commands
# completion before timing out. (integer value)
#command_wait_attempts = 100
# Number of seconds to wait for between checks for
# asynchronous commands completion. (integer value)
#command_wait_interval = 6
# The number of seconds Neutron agent will wait between
# polling for device changes. This value should be the same as
# CONF.AGENT.polling_interval in Neutron configuration.
# (integer value)
# Note: This option can be changed without restarting.
#neutron_agent_poll_interval = 2
# Max number of attempts to validate a Neutron agent status
# before raising network error for a dead agent. (integer
# value)
#neutron_agent_max_attempts = 100
# Wait time in seconds between attempts for validating Neutron
# agent status. (integer value)
#neutron_agent_status_retry_interval = 10
# If set to True, callback URLs without https:// will be
# rejected by the conductor. (boolean value)
# Note: This option can be changed without restarting.
#require_tls = false
# Path to store auto-generated TLS certificates used to
# validate connections to the ramdisk. (string value)
#certificates_path = /var/lib/ironic/certificates
# Path to the TLS CA to validate connection to the ramdisk.
# Set to True to use the system default CA storage. Set to
# False to disable validation. Ignored when automatic TLS
# setup is used. (string value)
#verify_ca = True
# Path to the TLS CA that is used to start the bare metal API.
# In some boot methods this file can be passed to the ramdisk.
# (string value)
#api_ca_file = <None>
[anaconda]
#
# From ironic
#
# kickstart template to use when no kickstart template is
# specified in the instance_info or the glance OS image.
# (string value)
# Note: This option can be changed without restarting.
#default_ks_template = $pybasedir/drivers/modules/ks.cfg.template
# Option to allow the kickstart configuration to be informed
# if SSL/TLS certificate verificaiton should be enforced, or
# not. This option exists largely to facilitate easy testing
# and use of the ``anaconda`` deployment interface. When this
# option is set, heartbeat operations, depending on the
# contents of the utilized kickstart template, may not enfore
# TLS certificate verification. (boolean value)
# Note: This option can be changed without restarting.
#insecure_heartbeat = false
[ansible]
#
# From ironic
#
# Extra arguments to pass on every invocation of Ansible.
# (string value)
#ansible_extra_args = <None>
# Set ansible verbosity level requested when invoking
# "ansible-playbook" command. 4 includes detailed SSH session
# logging. Default is 4 when global debug is enabled and 0
# otherwise. (integer value)
# Minimum value: 0
# Maximum value: 4
#verbosity = <None>
# Path to "ansible-playbook" script. Default will search the
# $PATH configured for user running ironic-conductor process.
# Provide the full path when ansible-playbook is not in $PATH
# or installed in not default location. (string value)
#ansible_playbook_script = ansible-playbook
# Path to directory with playbooks, roles and local inventory.
# (string value)
#playbooks_path = $pybasedir/drivers/modules/ansible/playbooks
# Path to ansible configuration file. If set to empty, system
# default will be used. (string value)
#config_file_path = $pybasedir/drivers/modules/ansible/playbooks/ansible.cfg
# Number of times to retry getting power state to check if
# bare metal node has been powered off after a soft power off.
# Value of 0 means do not retry on failure. (integer value)
# Minimum value: 0
#post_deploy_get_power_state_retries = 6
# Amount of time (in seconds) to wait between polling power
# state after trigger soft poweroff. (integer value)
# Minimum value: 0
#post_deploy_get_power_state_retry_interval = 5
# Extra amount of memory in MiB expected to be consumed by
# Ansible-related processes on the node. Affects decision
# whether image will fit into RAM. (integer value)
#extra_memory = 10
# Skip verifying SSL connections to the image store when
# downloading the image. Setting it to "True" is only
# recommended for testing environments that use self-signed
# certificates. (boolean value)
#image_store_insecure = false
# Specific CA bundle to use for validating SSL connections to
# the image store. If not specified, CA available in the
# ramdisk will be used. Is not used by default playbooks
# included with the driver. Suitable for environments that use
# self-signed certificates. (string value)
#image_store_cafile = <None>
# Client cert to use for SSL connections to image store. Is
# not used by default playbooks included with the driver.
# (string value)
#image_store_certfile = <None>
# Client key to use for SSL connections to image store. Is not
# used by default playbooks included with the driver. (string
# value)
#image_store_keyfile = <None>
# Name of the user to use for Ansible when connecting to the
# ramdisk over SSH. It may be overridden by per-node
# 'ansible_username' option in node's 'driver_info' field.
# (string value)
#default_username = ansible
# Absolute path to the private SSH key file to use by Ansible
# by default when connecting to the ramdisk over SSH. Default
# is to use default SSH keys configured for the user running
# the ironic-conductor service. Private keys with password
# must be pre-loaded into 'ssh-agent'. It may be overridden by
# per-node 'ansible_key_file' option in node's 'driver_info'
# field. (string value)
#default_key_file = <None>
# Path (relative to $playbooks_path or absolute) to the
# default playbook used for deployment. It may be overridden
# by per-node 'ansible_deploy_playbook' option in node's
# 'driver_info' field. (string value)
#default_deploy_playbook = deploy.yaml
# Path (relative to $playbooks_path or absolute) to the
# default playbook used for graceful in-band shutdown of the
# node. It may be overridden by per-node
# 'ansible_shutdown_playbook' option in node's 'driver_info'
# field. (string value)
#default_shutdown_playbook = shutdown.yaml
# Path (relative to $playbooks_path or absolute) to the
# default playbook used for node cleaning. It may be
# overridden by per-node 'ansible_clean_playbook' option in
# node's 'driver_info' field. (string value)
#default_clean_playbook = clean.yaml
# Path (relative to $playbooks_path or absolute) to the
# default auxiliary cleaning steps file used during the node
# cleaning. It may be overridden by per-node
# 'ansible_clean_steps_config' option in node's 'driver_info'
# field. (string value)
#default_clean_steps_config = clean_steps.yaml
# Absolute path to the python interpreter on the managed
# machines. It may be overridden by per-node
# 'ansible_python_interpreter' option in node's 'driver_info'
# field. By default, ansible uses /usr/bin/python (string
# value)
#default_python_interpreter = <None>
[api]
#
# From ironic
#
# The IP address or hostname on which ironic-api listens.
# (host address value)
#host_ip = 0.0.0.0
# The TCP port on which ironic-api listens. (port value)
# Minimum value: 0
# Maximum value: 65535
#port = 6385
# Unix socket to listen on. Disables host_ip and port. (string
# value)
#unix_socket = <None>
# File mode (an octal number) of the unix socket to listen on.
# Ignored if unix_socket is not set. (integer value)
#unix_socket_mode = <None>
# The maximum number of items returned in a single response
# from a collection resource. (integer value)
# Note: This option can be changed without restarting.
#max_limit = 1000
# Public URL to use when building the links to the API
# resources (for example, "https://ironic.rocks:6384"). If
# None the links will be built using the request's host URL.
# If the API is operating behind a proxy, you will want to
# change this to represent the proxy's URL. Defaults to None.
# Ignored when proxy headers parsing is enabled via
# [oslo_middleware]enable_proxy_headers_parsing option.
# (string value)
# Note: This option can be changed without restarting.
#public_endpoint = <None>
# Number of workers for OpenStack Ironic API service. The
# default is equal to the number of CPUs available, but not
# more than 4. One worker is used if the CPU number cannot be
# detected. (integer value)
#api_workers = <None>
# Enable the integrated stand-alone API to service requests
# via HTTPS instead of HTTP. If there is a front-end service
# performing HTTPS offloading from the service, this option
# should be False; note, you will want to enable proxy headers
# parsing with [oslo_middleware]enable_proxy_headers_parsing
# option or configure [api]public_endpoint option to set URLs
# in responses to the SSL terminated one. (boolean value)
#enable_ssl_api = false
# Whether to restrict the lookup API to only nodes in certain
# states. (boolean value)
# Note: This option can be changed without restarting.
#restrict_lookup = true
# Maximum interval (in seconds) for agent heartbeats. (integer
# value)
# Note: This option can be changed without restarting.
#ramdisk_heartbeat_timeout = 300
# Schema for network data used by this deployment. (string
# value)
#network_data_schema = $pybasedir/api/controllers/v1/network-data-schema.json
# If a project scoped administrative user is permitted to
# create/delte baremetal nodes in their project. (boolean
# value)
# Note: This option can be changed without restarting.
#project_admin_can_manage_own_nodes = true
[audit]
#
# From ironic
#
# Enable auditing of API requests (for ironic-api service).
# (boolean value)
#enabled = false
# Path to audit map file for ironic-api service. Used only
# when API audit is enabled. (string value)
#audit_map_file = /etc/ironic/api_audit_map.conf
# Comma separated list of Ironic REST API HTTP methods to be
# ignored during audit logging. For example: auditing will not
# be done on any GET or POST requests if this is set to
# "GET,POST". It is used only when API audit is enabled.
# (string value)
#ignore_req_list =
[audit_middleware_notifications]
#
# From keystonemiddleware.audit
#
# Indicate whether to use oslo_messaging as the notifier. If
# set to False, the local logger will be used as the notifier.
# If set to True, the oslo_messaging package must also be
# present. Otherwise, the local will be used instead. (boolean
# value)
#use_oslo_messaging = true
# The Driver to handle sending notifications. Possible values
# are messaging, messagingv2, routing, log, test, noop. If not
# specified, then value from oslo_messaging_notifications conf
# section is used. (string value)
#driver = <None>
# List of AMQP topics used for OpenStack notifications. If not
# specified, then value from oslo_messaging_notifications
# conf section is used. (list value)
#topics = <None>
# A URL representing messaging driver to use for notification.
# If not specified, we fall back to the same configuration
# used for RPC. (string value)
#transport_url = <None>
[cinder]
#
# From ironic
#
# Number of retries in the case of a failed action (currently
# only used when detaching volumes). (integer value)
#action_retries = 3
# Retry interval in seconds in the case of a failed action
# (only specific actions are retried). (integer value)
#action_retry_interval = 5
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [cinder]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying
# HTTPs connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection
# errors. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#connect_retry_delay = <None>
# Optional domain ID to use with v3 and v2 parameters. It will
# be used for both the user and project domain in v3 and
# ignored in v2 authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters.
# It will be used for both the user and project domain in v3
# and ignored in v2 authentication. (string value)
#default_domain_name = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client.
# NOTE: The unversioned endpoint should be specified here; to
# request a particular API version, use the `version`, `min-
# version`, and/or `max-version` options. (string value)
#endpoint_override = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be
# used as the upper bound of a range with min_version.
# Mutually exclusive with version. (string value)
#max_version = <None>
# The minimum major version of a given API, intended to be
# used as the lower bound of a range with max_version.
# Mutually exclusive with version. If min_version is given
# with no max_version it is as if max version is "latest".
# (string value)
#min_version = <None>
# User's password (string value)
#password = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [cinder]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [cinder]/tenant_name
#project_name = <None>
# The default region_name for endpoint URL discovery. (string
# value)
#region_name = <None>
# Client retries in the case of a failed request connection.
# (integer value)
#retries = 3
# The default service_name for endpoint URL discovery. (string
# value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string
# value)
#service_type = volumev3
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for
# retriable HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status
# codes. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#status_code_retry_delay = <None>
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [cinder]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint
# URL. (list value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version
# for endpoint URL discovery. Mutually exclusive with
# min_version and max_version (string value)
#version = <None>
[conductor]
#
# From ironic
#
# The size of the workers greenthread pool. Note that 2
# threads will be reserved by the conductor itself for
# handling heart beats and periodic tasks. On top of that,
# `sync_power_state_workers` will take up to 7 green threads
# with the default value of 8. (integer value)
# Minimum value: 3
#workers_pool_size = 100
# Seconds between conductor heart beats. (integer value)
#heartbeat_interval = 10
# Maximum time (in seconds) since the last check-in of a
# conductor. A conductor is considered inactive when this time
# has been exceeded. (integer value)
# Maximum value: 315576000
# Note: This option can be changed without restarting.
#heartbeat_timeout = 60
# Interval between syncing the node power state to the
# database, in seconds. Set to 0 to disable syncing. (integer
# value)
#sync_power_state_interval = 60
# Interval between checks of provision timeouts, in seconds.
# Set to 0 to disable checks. (integer value)
# Minimum value: 0
#check_provision_state_interval = 60
# Interval (seconds) between checks of rescue timeouts.
# (integer value)
# Minimum value: 1
#check_rescue_state_interval = 60
# Interval between checks of orphaned allocations, in seconds.
# Set to 0 to disable checks. (integer value)
# Minimum value: 0
#check_allocations_interval = 60
# Interval between cleaning up image caches, in seconds. Set
# to 0 to disable periodic clean-up. (integer value)
# Minimum value: 0
#cache_clean_up_interval = 3600
# Timeout (seconds) to wait for a callback from a deploy
# ramdisk. Set to 0 to disable timeout. (integer value)
# Minimum value: 0
#deploy_callback_timeout = 1800
# During sync_power_state, should the hardware power state be
# set to the state recorded in the database (True) or should
# the database be updated based on the hardware state (False).
# (boolean value)
# Note: This option can be changed without restarting.
#force_power_state_during_sync = true
# During sync_power_state failures, limit the number of times
# Ironic should try syncing the hardware node power state with
# the node power state in DB (integer value)
#power_state_sync_max_retries = 3
# The maximum number of worker threads that can be started
# simultaneously to sync nodes power states from the periodic
# task. (integer value)
# Minimum value: 1
#sync_power_state_workers = 8
# Maximum number of worker threads that can be started
# simultaneously by a periodic task. Should be less than RPC
# thread pool size. (integer value)
#periodic_max_workers = 8
# Number of attempts to grab a node lock. (integer value)
#node_locked_retry_attempts = 3
# Seconds to sleep between node lock attempts. (integer value)
#node_locked_retry_interval = 1
# When conductors join or leave the cluster, existing
# conductors may need to update any persistent local state as
# nodes are moved around the cluster. This option controls how
# often, in seconds, each conductor will check for nodes that
# it should "take over". Set it to 0 (or a negative value) to
# disable the check entirely. (integer value)
#sync_local_state_interval = 180
# Name of the Swift container to store config drive data. Used
# when configdrive_use_object_store is True. (string value)
#configdrive_swift_container = ironic_configdrive_container
# The timeout (in seconds) after which a configdrive temporary
# URL becomes invalid. Defaults to deploy_callback_timeout if
# it is set, otherwise to 1800 seconds. Used when
# configdrive_use_object_store is True. (integer value)
# Minimum value: 60
#configdrive_swift_temp_url_duration = <None>
# Timeout (seconds) for waiting for node inspection. 0 -
# unlimited. (integer value)
# Minimum value: 0
#inspect_wait_timeout = 1800
# Enables or disables automated cleaning. Automated cleaning
# is a configurable set of steps, such as erasing disk drives,
# that are performed on the node to ensure it is in a baseline
# state and ready to be deployed to. This is done after
# instance deletion as well as during the transition from a
# "manageable" to "available" state. When enabled, the
# particular steps performed to clean a node depend on which
# driver that node is managed by; see the individual driver's
# documentation for details. NOTE: The introduction of the
# cleaning operation causes instance deletion to take
# significantly longer. In an environment where all tenants
# are trusted (eg, because there is only one tenant), this
# option could be safely disabled. (boolean value)
# Note: This option can be changed without restarting.
#automated_clean = true
# Whether to allow nodes to enter or undergo deploy or
# cleaning when in maintenance mode. If this option is set to
# False, and a node enters maintenance during deploy or
# cleaning, the process will be aborted after the next
# heartbeat. Automated cleaning or making a node available
# will also fail. If True (the default), the process will
# begin and will pause after the node starts heartbeating.
# Moving it from maintenance will make the process continue.
# (boolean value)
# Note: This option can be changed without restarting.
#allow_provisioning_in_maintenance = true
# Timeout (seconds) to wait for a callback from the ramdisk
# doing the cleaning. If the timeout is reached the node will
# be put in the "clean failed" provision state. Set to 0 to
# disable timeout. (integer value)
# Minimum value: 0
#clean_callback_timeout = 1800
# Timeout (seconds) to wait for a callback from the rescue
# ramdisk. If the timeout is reached the node will be put in
# the "rescue failed" provision state. Set to 0 to disable
# timeout. (integer value)
# Minimum value: 0
#rescue_callback_timeout = 1800
# Timeout (in seconds) of soft reboot and soft power off
# operation. This value always has to be positive. (integer
# value)
# Minimum value: 1
# Note: This option can be changed without restarting.
#soft_power_off_timeout = 600
# Number of seconds to wait for power operations to complete,
# i.e., so that a baremetal node is in the desired power
# state. If timed out, the power operation is considered a
# failure. (integer value)
# Minimum value: 2
# Note: This option can be changed without restarting.
#power_state_change_timeout = 60
# Interval (in seconds) between checking the power state for
# nodes previously put into maintenance mode due to power
# synchronization failure. A node is automatically moved out
# of maintenance mode once its power state is retrieved
# successfully. Set to 0 to disable this check. (integer
# value)
# Minimum value: 0
#power_failure_recovery_interval = 300
# Name of the conductor group to join. Can be up to 255
# characters and is case insensitive. This conductor will only
# manage nodes with a matching "conductor_group" field set on
# the node. (string value)
#conductor_group =
# Allow deleting nodes which are in state 'available'.
# Defaults to True. (boolean value)
# Note: This option can be changed without restarting.
#allow_deleting_available_nodes = true
# Whether to enable publishing the baremetal API endpoint via
# multicast DNS. (boolean value)
#enable_mdns = false
# Glance ID, http:// or file:// URL of the kernel of the
# default deploy image. (string value)
# Note: This option can be changed without restarting.
#deploy_kernel = <None>
# Glance ID, http:// or file:// URL of the initramfs of the
# default deploy image. (string value)
# Note: This option can be changed without restarting.
#deploy_ramdisk = <None>
# Glance ID, http:// or file:// URL of the kernel of the
# default rescue image. (string value)
# Note: This option can be changed without restarting.
#rescue_kernel = <None>
# Glance ID, http:// or file:// URL of the initramfs of the
# default rescue image. (string value)
# Note: This option can be changed without restarting.
#rescue_ramdisk = <None>
# Password hash algorithm to be used for the rescue password.
# (string value)
# Possible values:
# sha256 - <No description provided>
# sha512 - <No description provided>
# Note: This option can be changed without restarting.
#rescue_password_hash_algorithm = sha256
# Option to cause the conductor to not fallback to an un-
# hashed version of the rescue password, permitting rescue
# with older ironic-python-agent ramdisks. (boolean value)
# Note: This option can be changed without restarting.
#require_rescue_password_hashed = false
# Glance ID, http:// or file:// URL of the EFI system
# partition image containing EFI boot loader. This image will
# be used by ironic when building UEFI-bootable ISO out of
# kernel and ramdisk. Required for UEFI boot from partition
# images. (string value)
# Note: This option can be changed without restarting.
#bootloader = <None>
# Priority to run automated clean steps for both in-band and
# out of band clean steps, provided in
# interface.step_name:priority format, e.g.
# deploy.erase_devices_metadata:123. The option can be
# specified multiple times to define priorities for multiple
# steps. If set to 0, this specific step will not run during
# cleaning. If unset for an inband clean step, will use the
# priority set in the ramdisk. (dict value)
#clean_step_priority_override =
# Boolean value, default True, if node event history is to be
# recorded. Errors and other noteworthy events in relation to
# a node are journaled to a database table which incurs some
# additional load. A periodic task does periodically remove
# entries from the database. Please note, if this is disabled,
# the conductor will continue to purge entries as long as
# [conductor]node_history_cleanup_batch_count is not 0.
# (boolean value)
# Note: This option can be changed without restarting.
#node_history = true
# Maximum number of history entries which will be stored in
# the database per node. Default is 300. This setting excludes
# the minimum number of days retained using the
# [conductor]node_history_minimum_days setting. (integer
# value)
# Minimum value: 0
# Note: This option can be changed without restarting.
#node_history_max_entries = 300
# Interval in seconds at which node history entries can be
# cleaned up in the database. Setting to 0 disables the
# periodic task. Defaults to once a day, or 86400 seconds.
# (integer value)
# Minimum value: 0
#node_history_cleanup_interval = 86400
# The target number of node history records to purge from the
# database when performing clean-up. Deletes are performed by
# node, and a node with excess records for a node will still
# be deleted. Defaults to 1000. Operators who find node
# history building up may wish to lower this threshold and
# decrease the time between cleanup operations using the
# ``node_history_cleanup_interval`` setting. (integer value)
# Minimum value: 0
#node_history_cleanup_batch_count = 1000
# The minimum number of days to explicitly keep on hand in the
# database history entries for nodes. This is exclusive from
# the [conductor]node_history_max_entries setting as users of
# this setting are anticipated to need to retain history by
# policy. (integer value)
# Minimum value: 0
# Note: This option can be changed without restarting.
#node_history_minimum_days = 0
# Priority to run automated verify steps provided in
# interface.step_name:priority format,e.g.
# management.clear_job_queue:123. The option can be specified
# multiple times to define priorities for multiple steps. If
# set to 0, this specific step will not run during
# verification. (dict value)
# Note: This option can be changed without restarting.
#verify_step_priority_override =
# If the conductor should record the Project ID indicated by
# Keystone for a requested deployment. Allows rights to be
# granted to directly access the deployed node as a lessee
# within the RBAC security model. The conductor does *not*
# record this value otherwise, and this information is not
# backfilled for prior instances which have been deployed.
# (boolean value)
# Note: This option can be changed without restarting.
#automatic_lessee = false
# The maximum number of concurrent nodes in deployment which
# are permitted in this Ironic system. If this limit is
# reached, new requests will be rejected until the number of
# deployments in progress is lower than this maximum. As this
# is a security mechanism requests are not queued, and this
# setting is a global setting applying to all requests this
# conductor receives, regardless of access rights. The
# concurrent deployment limit cannot be disabled. (integer
# value)
# Minimum value: 1
# Note: This option can be changed without restarting.
#max_concurrent_deploy = 250
# The maximum number of concurrent nodes in cleaning which are
# permitted in this Ironic system. If this limit is reached,
# new requests will be rejected until the number of nodes in
# cleaning is lower than this maximum. As this is a security
# mechanism requests are not queued, and this setting is a
# global setting applying to all requests this conductor
# receives, regardless of access rights. The concurrent clean
# limit cannot be disabled. (integer value)
# Minimum value: 1
# Note: This option can be changed without restarting.
#max_concurrent_clean = 50
# Security Option to permit an operator to disable file
# content inspections. Under normal conditions, the conductor
# will inspect requested image contents which are transferred
# through the conductor. Disabling this option is not
# advisable and opens the risk of unsafe images being
# processed which may allow an attacker to leverage unsafe
# features in various disk image formats to perform a variety
# of unsafe and potentially compromising actions. This option
# is *not* mutable, and requires a service restart to change.
# (boolean value)
#disable_deep_image_inspection = false
# Security Option to enable the conductor to *always* inspect
# the image content of any requested deploy, even if the
# deployment would have normally bypassed the conductor's
# cache. When this is set to False, the Ironic-Python-Agent is
# responsible for any necessary image checks. Setting this to
# True will result in a higher utilization of resources (disk
# space, network traffic) as the conductor will evaluate *all*
# images. This option is *not* mutable, and requires a service
# restart to change. This option requires
# [conductor]disable_deep_image_inspection to be set to False.
# (boolean value)
#conductor_always_validates_images = false
# The supported list of image formats which are permitted for
# deployment with Ironic. If an image format outside of this
# list is detected, the image validation logic will fail the
# deployment process. (list value)
# Note: This option can be changed without restarting.
#permitted_image_formats = raw,qcow2,iso
# DEPRECATED: Deprecated Security option: In the default case,
# image files have their checksums verified before undergoing
# additional conductor side actions such as image conversion.
# Enabling this option opens the risk of files being replaced
# at the source without the user's knowledge. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#disable_file_checksum = false
# Security option: By default Ironic will attempt to retrieve
# a remote checksum file via HTTP(S) URL in order to validate
# an image download. This is functionality aligning with
# ironic-python-agent support for standalone users. Disabling
# this functionality by setting this option to True will
# create a more secure environment, however it may break users
# in an unexpected fashion. (boolean value)
#disable_support_for_checksum_files = false
[console]
#
# From ironic
#
# Path to serial console terminal program. Used only by Shell
# In A Box console. (string value)
#terminal = shellinaboxd
# Directory containing the terminal SSL cert (PEM) for serial
# console access. Used only by Shell In A Box console. (string
# value)
#terminal_cert_dir = <None>
# Directory for holding terminal pid files. If not specified,
# the temporary directory will be used. (string value)
#terminal_pid_dir = <None>
# Timeout (in seconds) for the terminal session to be closed
# on inactivity. Set to 0 to disable timeout. Used only by
# Socat console. (integer value)
# Minimum value: 0
#terminal_timeout = 600
# Time interval (in seconds) for checking the status of
# console subprocess. (integer value)
#subprocess_checking_interval = 1
# Time (in seconds) to wait for the console subprocess to
# start. (integer value)
#subprocess_timeout = 10
# Time (in seconds) to wait for the console subprocess to exit
# before sending SIGKILL signal. (integer value)
#kill_timeout = 1
# IP address of Socat service running on the host of ironic
# conductor. Used only by Socat console. (IP address value)
#socat_address = $my_ip
# A range of ports available to be used for the console proxy
# service running on the host of ironic conductor, in the form
# of <start>:<stop>. This option is used by both Shellinabox
# and Socat console (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#port_range = 10000:20000
[cors]
#
# From oslo.middleware.cors
#
# Indicate whether this resource may be shared with the domain
# received in the requests "origin" header. Format:
# "<protocol>://<host>[:<port>]", no trailing slash. Example:
# https://horizon.example.com (list value)
#allowed_origin = <None>
# Indicate that the actual request can include user
# credentials (boolean value)
#allow_credentials = true
# Indicate which headers are safe to expose to the API.
# Defaults to HTTP Simple Headers. (list value)
#expose_headers =
# Maximum cache age of CORS preflight requests. (integer
# value)
#max_age = 3600
# Indicate which methods can be used during the actual
# request. (list value)
#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
# Indicate which header field names may be used during the
# actual request. (list value)
#allow_headers =
[database]
#
# From ironic
#
# MySQL engine to use. (string value)
#mysql_engine = InnoDB
#
# From oslo.db
#
# If True, SQLite uses synchronous mode. (boolean value)
#sqlite_synchronous = true
# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy
# The SQLAlchemy connection string to use to connect to the
# database. (string value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>
# The SQLAlchemy connection string to use to connect to the
# slave database. (string value)
#slave_connection = <None>
# The SQL mode to be used for MySQL sessions. This option,
# including the default, overrides any server-set SQL mode. To
# use whatever SQL mode is set by the server configuration,
# set this to no value. Example: mysql_sql_mode= (string
# value)
#mysql_sql_mode = TRADITIONAL
# For Galera only, configure wsrep_sync_wait causality checks
# on new connections. Default is None, meaning don't
# configure any setting. (integer value)
#mysql_wsrep_sync_wait = <None>
# DEPRECATED: If True, transparently enables support for
# handling MySQL Cluster (NDB). (boolean value)
# This option is deprecated for removal since 12.1.0.
# Its value may be silently ignored in the future.
# Reason: Support for the MySQL NDB Cluster storage engine has
# been deprecated and will be removed in a future release.
#mysql_enable_ndb = false
# Connections which have been present in the connection pool
# longer than this number of seconds will be replaced with a
# new one the next time they are checked out from the pool.
# (integer value)
#connection_recycle_time = 3600
# Maximum number of SQL connections to keep open in a pool.
# Setting a value of 0 indicates no limit. (integer value)
#max_pool_size = 5
# Maximum number of database connection retries during
# startup. Set to -1 to specify an infinite retry count.
# (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10
# Interval between retries of opening a SQL connection.
# (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10
# If set, use this value for max_overflow with SQLAlchemy.
# (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = 50
# Verbosity of SQL debugging information: 0=None,
# 100=Everything. (integer value)
# Minimum value: 0
# Maximum value: 100
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0
# Add Python stack traces to SQL as comment strings. (boolean
# value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = false
# If set, use this value for pool_timeout with SQLAlchemy.
# (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>
# Enable the experimental use of database reconnect on
# connection lost. (boolean value)
#use_db_reconnect = false
# Seconds between retries of a database transaction. (integer
# value)
#db_retry_interval = 1
# If True, increases the interval between retries of a
# database operation up to db_max_retry_interval. (boolean
# value)
#db_inc_retry_interval = true
# If db_inc_retry_interval is set, the maximum seconds between
# retries of a database operation. (integer value)
#db_max_retry_interval = 10
# Maximum retries in case of connection error or deadlock
# error before error is raised. Set to -1 to specify an
# infinite retry count. (integer value)
#db_max_retries = 20
# Optional URL parameters to append onto the connection URL at
# connect time; specify as param1=value1¶m2=value2&...
# (string value)
#connection_parameters =
[deploy]
#
# From ironic
#
# ironic-conductor node's HTTP server URL. Example:
# http://192.1.2.3:8080 (string value)
#http_url = <None>
# ironic-conductor node's HTTP root path. (string value)
#http_root = /httpboot
# URL of the ironic-conductor node's HTTP server for boot
# methods such as virtual media, where images could be served
# outside of the provisioning network. Does not apply when
# Swift is used. Defaults to http_url. (string value)
#external_http_url = <None>
# Agent callback URL of the bare metal API for boot methods
# such as virtual media, where images could be served outside
# of the provisioning network. Defaults to the configuration
# from [service_catalog]. (string value)
#external_callback_url = <None>
# Whether to support the use of ATA Secure Erase during the
# cleaning process. Defaults to True. (boolean value)
# Note: This option can be changed without restarting.
#enable_ata_secure_erase = true
# Whether to support the use of NVMe Secure Erase during the
# cleaning process. Currently nvme-cli format command is
# supported with user-data and crypto modes, depending on
# device capabilities.Defaults to True. (boolean value)
# Note: This option can be changed without restarting.
#enable_nvme_secure_erase = true
# Priority to run in-band erase devices via the Ironic Python
# Agent ramdisk. If unset, will use the priority set in the
# ramdisk (defaults to 10 for the GenericHardwareManager). If
# set to 0, will not run during cleaning. (integer value)
# Note: This option can be changed without restarting.
#erase_devices_priority = <None>
# Priority to run in-band clean step that erases metadata from
# devices, via the Ironic Python Agent ramdisk. If unset, will
# use the priority set in the ramdisk (defaults to 99 for the
# GenericHardwareManager). If set to 0, will not run during
# cleaning. (integer value)
# Note: This option can be changed without restarting.
#erase_devices_metadata_priority = <None>
# Priority to run in-band clean step that erases RAID
# configuration from devices, via the Ironic Python Agent
# ramdisk. If unset, will use the priority set in the ramdisk
# (defaults to 0 for the GenericHardwareManager). If set to 0,
# will not run during cleaning. (integer value)
# Note: This option can be changed without restarting.
#delete_configuration_priority = <None>
# Priority to run in-band clean step that creates RAID
# configuration from devices, via the Ironic Python Agent
# ramdisk. If unset, will use the priority set in the ramdisk
# (defaults to 0 for the GenericHardwareManager). If set to 0,
# will not run during cleaning. (integer value)
# Note: This option can be changed without restarting.
#create_configuration_priority = <None>
# During shred, overwrite all block devices N times with
# random data. This is only used if a device could not be ATA
# Secure Erased. Defaults to 1. (integer value)
# Minimum value: 0
# Note: This option can be changed without restarting.
#shred_random_overwrite_iterations = 1
# Whether to write zeros to a node's block devices after
# writing random data. This will write zeros to the device
# even when deploy.shred_random_overwrite_iterations is 0.
# This option is only used if a device could not be ATA Secure
# Erased. Defaults to True. (boolean value)
# Note: This option can be changed without restarting.
#shred_final_overwrite_with_zeros = true
# Defines what to do if a secure erase operation (NVMe or ATA)
# fails during cleaning in the Ironic Python Agent. If False,
# the cleaning operation will fail and the node will be put in
# ``clean failed`` state. If True, shred will be invoked and
# cleaning will continue. (boolean value)
# Note: This option can be changed without restarting.
#continue_if_disk_secure_erase_fails = false
# Defines the target pool size used by Ironic Python Agent
# ramdisk to erase disk devices. The number of threads created
# to erase disks will not exceed this value or the number of
# disks to be erased. (integer value)
# Minimum value: 1
# Note: This option can be changed without restarting.
#disk_erasure_concurrency = 4
# Whether to power off a node after deploy failure. Defaults
# to True. (boolean value)
# Note: This option can be changed without restarting.
#power_off_after_deploy_failure = true
# Default boot mode to use when no boot mode is requested in
# node's driver_info, capabilities or in the `instance_info`
# configuration. Currently the default boot mode is "uefi",
# but it was "bios" previously in Ironic. It is recommended to
# set an explicit value for this option, and if the setting or
# default differs from nodes, to ensure that nodes are
# configured specifically for their desired boot mode. (string
# value)
# Possible values:
# uefi - UEFI boot mode
# bios - Legacy BIOS boot mode
# Note: This option can be changed without restarting.
#default_boot_mode = uefi
# Whether to upload the config drive to object store. Set this
# option to True to store config drive in a swift endpoint.
# (boolean value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [conductor]/configdrive_use_swift
#configdrive_use_object_store = false
# The name of subdirectory under ironic-conductor node's HTTP
# root path which is used to place instance images for the
# direct deploy interface, when local HTTP service is
# incorporated to provide instance image instead of swift
# tempurls. (string value)
#http_image_subdir = agent_images
# Whether to allow deployment agents to perform lookup,
# heartbeat operations during initial states of a machine
# lifecycle and by-pass the normal setup procedures for a
# ramdisk. This feature also enables power operations which
# are part of deployment processes to be bypassed if the
# ramdisk has performed a heartbeat operation using the
# fast_track_timeout setting. (boolean value)
# Note: This option can be changed without restarting.
#fast_track = false
# Seconds for which the last heartbeat event is to be
# considered valid for the purpose of a fast track sequence.
# This setting should generally be less than the number of
# seconds for "Power-On Self Test" and typical ramdisk start-
# up. This value should not exceed the
# [api]ramdisk_heartbeat_timeout setting. (integer value)
# Minimum value: 0
# Maximum value: 300
# Note: This option can be changed without restarting.
#fast_track_timeout = 300
# If the ironic-python-agent should skip read-only devices
# when running the "erase_devices" clean step where block
# devices are zeroed out. This requires ironic-python-agent
# 6.0.0 or greater. By default a read-only device will cause
# non-metadata based cleaning operations to fail due to the
# possible operational security risk of data being retained
# between deployments of the bare metal node. (boolean value)
# Note: This option can be changed without restarting.
#erase_skip_read_only = false
# Specifies whether a boot iso image should be served from its
# own original location using the image source url directly,
# or if ironic should cache the image on the conductor and
# serve it from ironic's own http server. (string value)
# Possible values:
# http - In case the ramdisk is already a bootable iso, using
# this option it will be directly provided by an external HTTP
# service using its full url.
# local - This is the default behavior. The image is
# downloaded, prepared and cached locally, to be served from
# the conductor.
# swift - Same as "http", but if the image is a Glance UUID,
# it is exposed via a Swift temporary URL.
# Note: This option can be changed without restarting.
#ramdisk_image_download_source = local
# On the ironic-conductor node, directory where master ISO
# images are stored on disk. Setting to the empty string
# disables image caching. (string value)
#iso_master_path = /var/lib/ironic/master_iso_images
# Maximum size (in MiB) of cache for master ISO images,
# including those in use. (integer value)
#iso_cache_size = 20480
# Maximum TTL (in minutes) for old master ISO images in cache.
# (integer value)
#iso_cache_ttl = 10080
[dhcp]
#
# From ironic
#
# DHCP provider to use. "neutron" uses Neutron, "dnsmasq" uses
# the Dnsmasq provider, and "none" uses a no-op provider.
# (string value)
#dhcp_provider = neutron
[disk_partitioner]
#
# From ironic_lib.disk_partitioner
#
# After Ironic has completed creating the partition table, it
# continues to check for activity on the attached iSCSI device
# status at this interval prior to copying the image to the
# node, in seconds (integer value)
#check_device_interval = 1
# The maximum number of times to check that the device is not
# accessed by another process. If the device is still busy
# after that, the disk partitioning will be treated as having
# failed. (integer value)
#check_device_max_retries = 20
[disk_utils]
#
# From ironic
#
# Memory limit for "qemu-img convert" in MiB. Implemented via
# the address space resource limit. (integer value)
#image_convert_memory_limit = 2048
# Number of attempts to convert an image. (integer value)
#image_convert_attempts = 3
#
# From ironic_lib.disk_utils
#
# Size of EFI system partition in MiB when configuring UEFI
# systems for local boot. (integer value)
#efi_system_partition_size = 200
# Size of BIOS Boot partition in MiB when configuring GPT
# partitioned systems for local boot in BIOS. (integer value)
#bios_boot_partition_size = 1
# Block size to use when writing to the nodes disk. (string
# value)
#dd_block_size = 1M
# Maximum attempts to detect a newly created partition.
# (integer value)
# Minimum value: 1
#partition_detection_attempts = 3
# Maximum number of attempts to try to read the partition.
# (integer value)
#partprobe_attempts = 10
# Memory limit for "qemu-img convert" in MiB. Implemented via
# the address space resource limit. (integer value)
#image_convert_memory_limit = 2048
# Number of attempts to convert an image. (integer value)
#image_convert_attempts = 3
[drac]
#
# From ironic
#
# Interval (in seconds) between periodic RAID job status
# checks to determine whether the asynchronous RAID
# configuration was successfully finished or not. (integer
# value)
# Minimum value: 1
#query_raid_config_job_status_interval = 120
# Maximum amount of time (in seconds) to wait for the boot
# device configuration job to transition to the correct state
# to allow a reboot or power on to complete. (integer value)
# Minimum value: 1
#boot_device_job_status_timeout = 30
# Maximum number of retries for the configuration job to
# complete successfully. (integer value)
# Minimum value: 1
#config_job_max_retries = 240
# Number of seconds to wait between checking for completed
# import configuration task (integer value)
# Minimum value: 0
#query_import_config_job_status_interval = 60
# Maximum time (in seconds) to wait for factory reset of BIOS
# settings to complete. (integer value)
# Minimum value: 1
#bios_factory_reset_timeout = 600
# Maximum time (in seconds) to wait for RAID job to complete
# (integer value)
# Minimum value: 1
#raid_job_timeout = 300
[glance]
#
# From ironic
#
# A list of URL schemes that can be downloaded directly via
# the direct_url. Currently supported schemes: [file]. (list
# value)
#allowed_direct_url_schemes =
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [glance]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying
# HTTPs connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection
# errors. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#connect_retry_delay = <None>
# Optional domain ID to use with v3 and v2 parameters. It will
# be used for both the user and project domain in v3 and
# ignored in v2 authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters.
# It will be used for both the user and project domain in v3
# and ignored in v2 authentication. (string value)
#default_domain_name = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client.
# NOTE: The unversioned endpoint should be specified here; to
# request a particular API version, use the `version`, `min-
# version`, and/or `max-version` options. (string value)
#endpoint_override = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be
# used as the upper bound of a range with min_version.
# Mutually exclusive with version. (string value)
#max_version = <None>
# The minimum major version of a given API, intended to be
# used as the lower bound of a range with max_version.
# Mutually exclusive with version. If min_version is given
# with no max_version it is as if max version is "latest".
# (string value)
#min_version = <None>
# Number of retries when downloading an image from glance.
# (integer value)
# Note: This option can be changed without restarting.
#num_retries = 0
# User's password (string value)
#password = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [glance]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [glance]/tenant_name
#project_name = <None>
# The default region_name for endpoint URL discovery. (string
# value)
#region_name = <None>
# The default service_name for endpoint URL discovery. (string
# value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string
# value)
#service_type = image
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for
# retriable HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status
# codes. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#status_code_retry_delay = <None>
# The account that Glance uses to communicate with Swift. The
# format is "AUTH_uuid". "uuid" is the UUID for the account
# configured in the glance-api.conf. For example:
# "AUTH_a422b2-91f3-2f46-74b7-d7c9e8958f5d30". If not set, the
# default value is calculated based on the ID of the project
# used to access Swift (as set in the [swift] section). Swift
# temporary URL format:
# "endpoint_url/api_version/account/container/object_id"
# (string value)
#swift_account = <None>
# The prefix added to the project uuid to determine the swift
# account. (string value)
#swift_account_prefix = AUTH
# The Swift API version to create a temporary URL for.
# Defaults to "v1". Swift temporary URL format:
# "endpoint_url/api_version/account/container/object_id"
# (string value)
#swift_api_version = v1
# The Swift container Glance is configured to store its images
# in. Defaults to "glance", which is the default in glance-
# api.conf. Swift temporary URL format:
# "endpoint_url/api_version/account/container/object_id"
# (string value)
#swift_container = glance
# The "endpoint" (scheme, hostname, optional port) for the
# Swift URL of the form
# "endpoint_url/api_version/account/container/object_id". Do
# not include trailing "/". For example, use
# "https://swift.example.com". If using RADOS Gateway,
# endpoint may also contain /swift path; if it does not, it
# will be appended. Used for temporary URLs, will be fetched
# from the service catalog, if not provided. (string value)
#swift_endpoint_url = <None>
# This should match a config by the same name in the Glance
# configuration file. When set to 0, a single-tenant store
# will only use one container to store all images. When set to
# an integer value between 1 and 32, a single-tenant store
# will use multiple containers to store images, and this value
# will determine how many containers are created. (integer
# value)
#swift_store_multiple_containers_seed = 0
# Whether to cache generated Swift temporary URLs. Setting it
# to true is only useful when an image caching proxy is used.
# Defaults to False. (boolean value)
#swift_temp_url_cache_enabled = false
# The length of time in seconds that the temporary URL will be
# valid for. Defaults to 20 minutes. If some deploys get a 401
# response code when trying to download from the temporary
# URL, try raising this duration. This value must be greater
# than or equal to the value for
# swift_temp_url_expected_download_start_delay (integer value)
#swift_temp_url_duration = 1200
# This is the delay (in seconds) from the time of the deploy
# request (when the Swift temporary URL is generated) to when
# the IPA ramdisk starts up and URL is used for the image
# download. This value is used to check if the Swift temporary
# URL duration is large enough to let the image download
# begin. Also if temporary URL caching is enabled this will
# determine if a cached entry will still be valid when the
# download starts. swift_temp_url_duration value must be
# greater than or equal to this option's value. Defaults to 0.
# (integer value)
# Minimum value: 0
#swift_temp_url_expected_download_start_delay = 0
# The secret token given to Swift to allow temporary URL
# downloads. Required for temporary URLs. For the Swift
# backend, the key on the service project (as set in the
# [swift] section) is used by default. (string value)
#swift_temp_url_key = <None>
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [glance]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint
# URL. (list value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version
# for endpoint URL discovery. Mutually exclusive with
# min_version and max_version (string value)
#version = <None>
[healthcheck]
#
# From ironic
#
# Enable the health check endpoint at /healthcheck. Note that
# this is unauthenticated. More information is available at
# https://docs.openstack.org/oslo.middleware/latest/reference/healthcheck_plugins.html.
# (boolean value)
#enabled = false
#
# From oslo.middleware.healthcheck
#
# DEPRECATED: The path to respond to healtcheck requests on.
# (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#path = /healthcheck
# Show more detailed information as part of the response.
# Security note: Enabling this option may expose sensitive
# details about the service being monitored. Be sure to verify
# that it will not violate your security policies. (boolean
# value)
#detailed = false
# Additional backends that can perform health checks and
# report that information back as part of a request. (list
# value)
#backends =
# Check the presence of a file to determine if an application
# is running on a port. Used by DisableByFileHealthcheck
# plugin. (string value)
#disable_by_file_path = <None>
# Check the presence of a file based on a port to determine if
# an application is running on a port. Expects a "port:path"
# list of strings. Used by DisableByFilesPortsHealthcheck
# plugin. (list value)
#disable_by_file_paths =
[ilo]
#
# From ironic
#
# Timeout (in seconds) for iLO operations (integer value)
#client_timeout = 60
# Port to be used for iLO operations (port value)
# Minimum value: 0
# Maximum value: 65535
#client_port = 443
# The Swift iLO container to store data. (string value)
#swift_ilo_container = ironic_ilo_container
# Amount of time in seconds for Swift objects to auto-expire.
# (integer value)
#swift_object_expiry_timeout = 900
# Set this to True to use http web server to host floppy
# images and generated boot ISO. This requires http_root and
# http_url to be configured in the [deploy] section of the
# config file. If this is set to False, then Ironic will use
# Swift to host the floppy images and generated boot_iso.
# (boolean value)
#use_web_server_for_images = false
# Priority for reset_ilo clean step. (integer value)
#clean_priority_reset_ilo = 0
# Priority for reset_bios_to_default clean step. (integer
# value)
#clean_priority_reset_bios_to_default = 10
# Priority for reset_secure_boot_keys clean step. This step
# will reset the secure boot keys to manufacturing defaults.
# (integer value)
#clean_priority_reset_secure_boot_keys_to_default = 20
# Priority for clear_secure_boot_keys clean step. This step is
# not enabled by default. It can be enabled to clear all
# secure boot keys enrolled with iLO. (integer value)
#clean_priority_clear_secure_boot_keys = 0
# Priority for reset_ilo_credential clean step. This step
# requires "ilo_change_password" parameter to be updated in
# nodes's driver_info with the new password. (integer value)
#clean_priority_reset_ilo_credential = 30
# Amount of time in seconds to wait in between power
# operations (integer value)
#power_wait = 2
# Interval (in seconds) between periodic erase-devices status
# checks to determine whether the asynchronous out-of-band
# erase-devices was successfully finished or not. On an
# average, a 300GB HDD with default pattern "overwrite" would
# take approximately 9 hours and 300GB SSD with default
# pattern "block" would take approx. 30 seconds to complete
# sanitize disk erase. (integer value)
# Minimum value: 10
#oob_erase_devices_job_status_interval = 300
# DEPRECATED: CA certificate file to validate iLO. (string
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Its being replaced by new configuration parameter
# "verify_ca".
#ca_file = <None>
# CA certificate to validate iLO. This can be either a Boolean
# value, a path to a CA_BUNDLE file or directory with
# certificates of trusted CAs. If set to True the driver will
# verify the host certificates; if False the driver will
# ignore verifying the SSL certificate. If it's a path the
# driver will use the specified certificate or one of the
# certificates in the directory. Defaults to True. (string
# value)
#verify_ca = True
# Default boot mode to be used in provisioning when
# "boot_mode" capability is not provided in the
# "properties/capabilities" of the node. The default is "auto"
# for backward compatibility. When "auto" is specified,
# default boot mode will be selected based on boot mode
# settings on the system. (string value)
# Possible values:
# auto - based on boot mode settings on the system
# bios - BIOS boot mode
# uefi - UEFI boot mode
#default_boot_mode = auto
# File permission for swift-less image hosting with the octal
# permission representation of file access permissions. This
# setting defaults to ``644``, or as the octal number
# ``0o644`` in Python. This setting must be set to the octal
# number representation, meaning starting with ``0o``.
# (integer value)
#file_permission = 420
# Additional kernel parameters to pass down to the instance
# kernel. These parameters can be consumed by the kernel or by
# the applications by reading /proc/cmdline. Mind severe
# cmdline size limit! Can be overridden by
# `instance_info/kernel_append_params` property. (string
# value)
# Note: This option can be changed without restarting.
#kernel_append_params = nofb nomodeset vga=normal
# On the ironic-conductor node, directory where ilo driver
# stores the CSR and the cert. (string value)
#cert_path = /var/lib/ironic/ilo/
[inspector]
#
# From ironic
#
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [inspector]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying
# HTTPs connections. (string value)
#cafile = <None>
# endpoint to use as a callback for posting back introspection
# data when boot is managed by ironic. Standard keystoneauth
# options are used by default. (string value)
#callback_endpoint_override = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection
# errors. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#connect_retry_delay = <None>
# Optional domain ID to use with v3 and v2 parameters. It will
# be used for both the user and project domain in v3 and
# ignored in v2 authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters.
# It will be used for both the user and project domain in v3
# and ignored in v2 authentication. (string value)
#default_domain_name = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client.
# NOTE: The unversioned endpoint should be specified here; to
# request a particular API version, use the `version`, `min-
# version`, and/or `max-version` options. (string value)
#endpoint_override = <None>
# extra kernel parameters to pass to the inspection ramdisk
# when boot is managed by ironic (not ironic-inspector). Pairs
# key=value separated by spaces. (string value)
#extra_kernel_params =
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be
# used as the upper bound of a range with min_version.
# Mutually exclusive with version. (string value)
#max_version = <None>
# The minimum major version of a given API, intended to be
# used as the lower bound of a range with max_version.
# Mutually exclusive with version. If min_version is given
# with no max_version it is as if max version is "latest".
# (string value)
#min_version = <None>
# User's password (string value)
#password = <None>
# whether to power off a node after inspection finishes.
# Ignored for nodes that have fast track mode enabled.
# (boolean value)
#power_off = true
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [inspector]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [inspector]/tenant_name
#project_name = <None>
# The default region_name for endpoint URL discovery. (string
# value)
#region_name = <None>
# require that the in-band inspection boot is fully managed by
# ironic. Set this to True if your installation of ironic-
# inspector does not have a separate PXE boot environment.
# (boolean value)
#require_managed_boot = false
# The default service_name for endpoint URL discovery. (string
# value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string
# value)
#service_type = baremetal-introspection
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for
# retriable HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status
# codes. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#status_code_retry_delay = <None>
# period (in seconds) to check status of nodes on inspection
# (integer value)
#status_check_period = 60
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [inspector]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint
# URL. (list value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version
# for endpoint URL discovery. Mutually exclusive with
# min_version and max_version (string value)
#version = <None>
[inventory]
#
# From ironic
#
# The storage backend for storing introspection data. (string
# value)
# Possible values:
# none - introspection data will not be stored
# database - introspection data stored in an SQL database
# swift - introspection data stored in Swift
#data_backend = database
# The Swift introspection data container to store the
# inventory data. (string value)
#swift_data_container = introspection_data_container
[ipmi]
#
# From ironic
#
# Maximum time in seconds to retry retryable IPMI operations.
# (An operation is retryable, for example, if the requested
# operation fails because the BMC is busy.) Setting this too
# high can cause the sync power state periodic task to hang
# when there are slow or unresponsive BMCs. (integer value)
# Note: This option can be changed without restarting.
#command_retry_timeout = 60
# Minimum time, in seconds, between IPMI operations sent to a
# server. There is a risk with some hardware that setting this
# too low may cause the BMC to crash. Recommended setting is 5
# seconds. (integer value)
# Note: This option can be changed without restarting.
#min_command_interval = 5
# When set to True and the parameters are supported by
# ipmitool, the number of retries and the retry interval are
# passed to ipmitool as parameters, and ipmitool will do the
# retries. When set to False, ironic will retry the ipmitool
# commands. Recommended setting is False (boolean value)
#use_ipmitool_retries = false
# Kill `ipmitool` process invoked by ironic to read node power
# state if `ipmitool` process does not exit after
# `command_retry_timeout` timeout expires. Recommended setting
# is True (boolean value)
# Note: This option can be changed without restarting.
#kill_on_timeout = true
# Default timeout behavior whether ironic sends a raw IPMI
# command to disable the 60 second timeout for booting.
# Setting this option to False will NOT send that command, the
# default value is True. It may be overridden by per-node
# 'ipmi_disable_boot_timeout' option in node's 'driver_info'
# field. (boolean value)
# Note: This option can be changed without restarting.
#disable_boot_timeout = true
# Additional errors ipmitool may encounter, specific to the
# environment it is run in. (multi valued)
# Note: This option can be changed without restarting.
#additional_retryable_ipmi_errors =
# Enables all ipmi commands to be executed with an additional
# debugging output. This is a separate option as ipmitool can
# log a substantial amount of misleading text when in this
# mode. (boolean value)
# Note: This option can be changed without restarting.
#debug = false
# List of possible cipher suites versions that can be
# supported by the hardware in case the field `cipher_suite`
# is not set for the node. (list value)
#cipher_suite_versions =
[irmc]
#
# From ironic
#
# Ironic conductor node's "NFS" or "CIFS" root path (string
# value)
#remote_image_share_root = /remote_image_share_root
# IP of remote image server (string value)
#remote_image_server = <None>
# Share type of virtual media (string value)
# Possible values:
# CIFS - CIFS (Common Internet File System) protocol
# NFS - NFS (Network File System) protocol
#remote_image_share_type = CIFS
# share name of remote_image_server (string value)
#remote_image_share_name = share
# User name of remote_image_server (string value)
#remote_image_user_name = <None>
# Password of remote_image_user_name (string value)
#remote_image_user_password = <None>
# Domain name of remote_image_user_name (string value)
#remote_image_user_domain =
# Port to be used for iRMC operations (port value)
# Minimum value: 0
# Maximum value: 65535
# Possible values:
# 443 - port 443
# 80 - port 80
#port = 443
# Authentication method to be used for iRMC operations (string
# value)
# Possible values:
# basic - Basic authentication
# digest - Digest authentication
#auth_method = basic
# Timeout (in seconds) for iRMC operations (integer value)
#client_timeout = 60
# Sensor data retrieval method. (string value)
# Possible values:
# ipmitool - IPMItool
# scci - Fujitsu SCCI (ServerView Common Command Interface)
#sensor_method = ipmitool
# SNMP protocol version (string value)
# Possible values:
# v1 - SNMPv1
# v2c - SNMPv2c
# v3 - SNMPv3
#snmp_version = v2c
# SNMP port (port value)
# Minimum value: 0
# Maximum value: 65535
#snmp_port = 161
# SNMP community. Required for versions "v1" and "v2c" (string
# value)
#snmp_community = public
# DEPRECATED: SNMP security name. Required for version 'v3'.
# (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Use irmc_snmp_user
#snmp_security = <None>
# SNMP polling interval in seconds (integer value)
#snmp_polling_interval = 10
# SNMPv3 message authentication protocol ID. Required for
# version 'v3'. The valid options are 'sha', 'sha256',
# 'sha384' and 'sha512', while 'sha' is the only supported
# protocol in iRMC S4 and S5, and from iRMC S6, 'sha256',
# 'sha384' and 'sha512' are supported, but 'sha' is not
# supported any more. (string value)
# Possible values:
# sha - Secure Hash Algorithm 1, supported in iRMC S4 and S5.
# sha256 - Secure Hash Algorithm 2 with 256 bits digest, only
# supported in iRMC S6.
# sha384 - Secure Hash Algorithm 2 with 384 bits digest, only
# supported in iRMC S6.
# sha512 - Secure Hash Algorithm 2 with 512 bits digest, only
# supported in iRMC S6.
#snmp_auth_proto = sha
# SNMPv3 message privacy (encryption) protocol ID. Required
# for version 'v3'. 'aes' is supported. (string value)
# Possible values:
# aes - Advanced Encryption Standard
#snmp_priv_proto = aes
# Priority for restore_irmc_bios_config clean step. (integer
# value)
#clean_priority_restore_irmc_bios_config = 0
# List of vendor IDs and device IDs for GPU device to inspect.
# List items are in format vendorID/deviceID and separated by
# commas. GPU inspection will use this value to count the
# number of GPU device in a node. If this option is not
# defined, then leave out pci_gpu_devices in capabilities
# property. Sample gpu_ids value: 0x1000/0x0079,0x2100/0x0080
# (list value)
#gpu_ids =
# List of vendor IDs and device IDs for CPU FPGA to inspect.
# List items are in format vendorID/deviceID and separated by
# commas. CPU inspection will use this value to find existence
# of CPU FPGA in a node. If this option is not defined, then
# leave out CUSTOM_CPU_FPGA in node traits. Sample fpga_ids
# value: 0x1000/0x0079,0x2100/0x0080 (list value)
#fpga_ids =
# Interval (in seconds) between periodic RAID status checks to
# determine whether the asynchronous RAID configuration was
# successfully finished or not. Foreground Initialization
# (FGI) will start 5 minutes after creating virtual drives.
# (integer value)
# Minimum value: 1
#query_raid_config_fgi_status_interval = 300
# Additional kernel parameters to pass down to the instance
# kernel. These parameters can be consumed by the kernel or by
# the applications by reading /proc/cmdline. Mind severe
# cmdline size limit! Can be overridden by
# `instance_info/kernel_append_params` property. (string
# value)
# Note: This option can be changed without restarting.
#kernel_append_params = <None>
[ironic_lib]
#
# From ironic_lib.exception
#
# Used if there is a formatting error when generating an
# exception message (a programming error). If True, raise an
# exception; if False, use the unformatted message. (boolean
# value)
#fatal_exception_format_errors = false
#
# From ironic_lib.utils
#
# Command that is prefixed to commands that are run as root.
# If not specified, no commands are run as root. (string
# value)
#root_helper = sudo ironic-rootwrap /etc/ironic/rootwrap.conf
[json_rpc]
#
# From ironic_lib.json_rpc
#
# Authentication strategy used by JSON RPC. Defaults to the
# global auth_strategy setting. (string value)
# Possible values:
# noauth - no authentication
# keystone - use the Identity service for authentication
# http_basic - HTTP basic authentication
#auth_strategy = <None>
# Path to Apache format user authentication file used when
# auth_strategy=http_basic (string value)
#http_basic_auth_user_file = /etc/ironic/htpasswd-json-rpc
# The IP address or hostname on which JSON RPC will listen.
# (host address value)
#host_ip = ::
# The port to use for JSON RPC (port value)
# Minimum value: 0
# Maximum value: 65535
#port = 8089
# Whether to use TLS for JSON RPC (boolean value)
#use_ssl = false
# DEPRECATED: Name of the user to use for HTTP Basic
# authentication client requests. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Use username instead
#http_basic_username = <None>
# DEPRECATED: Password to use for HTTP Basic authentication
# client requests. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Use password instead
#http_basic_password = <None>
# List of roles allowed to use JSON RPC (list value)
#allowed_roles = admin
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [json_rpc]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying
# HTTPs connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# Optional domain ID to use with v3 and v2 parameters. It will
# be used for both the user and project domain in v3 and
# ignored in v2 authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters.
# It will be used for both the user and project domain in v3
# and ignored in v2 authentication. (string value)
#default_domain_name = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# User's password (string value)
#password = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [json_rpc]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [json_rpc]/tenant_name
#project_name = <None>
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [json_rpc]/user_name
#username = <None>
[keystone_authtoken]
#
# From keystonemiddleware.auth_token
#
# Complete "public" Identity API endpoint. This endpoint
# should not be an "admin" endpoint, as it should be
# accessible by all end users. Unauthenticated clients are
# redirected to this endpoint to authenticate. Although this
# endpoint should ideally be unversioned, client support in
# the wild varies. If you're using a versioned v2 endpoint
# here, then this should *not* be the same endpoint the
# service user utilizes for validating tokens, because normal
# end users may not be able to reach that endpoint. (string
# value)
# Deprecated group/name - [keystone_authtoken]/auth_uri
#www_authenticate_uri = <None>
# DEPRECATED: Complete "public" Identity API endpoint. This
# endpoint should not be an "admin" endpoint, as it should be
# accessible by all end users. Unauthenticated clients are
# redirected to this endpoint to authenticate. Although this
# endpoint should ideally be unversioned, client support in
# the wild varies. If you're using a versioned v2 endpoint
# here, then this should *not* be the same endpoint the
# service user utilizes for validating tokens, because normal
# end users may not be able to reach that endpoint. This
# option is deprecated in favor of www_authenticate_uri and
# will be removed in the S release. (string value)
# This option is deprecated for removal since Queens.
# Its value may be silently ignored in the future.
# Reason: The auth_uri option is deprecated in favor of
# www_authenticate_uri and will be removed in the S release.
#auth_uri = <None>
# API version of the Identity API endpoint. (string value)
#auth_version = <None>
# Interface to use for the Identity API endpoint. Valid values
# are "public", "internal" (default) or "admin". (string
# value)
#interface = internal
# Do not handle authorization requests within the middleware,
# but delegate the authorization decision to downstream WSGI
# components. (boolean value)
#delay_auth_decision = false
# Request timeout value for communicating with Identity API
# server. (integer value)
#http_connect_timeout = <None>
# How many times are we trying to reconnect when communicating
# with Identity API Server. (integer value)
#http_request_max_retries = 3
# Request environment key where the Swift cache object is
# stored. When auth_token middleware is deployed with a Swift
# cache, use this option to have the middleware share a
# caching backend with swift. Otherwise, use the
# ``memcached_servers`` option instead. (string value)
#cache = <None>
# Required if identity server requires client certificate
# (string value)
#certfile = <None>
# Required if identity server requires client certificate
# (string value)
#keyfile = <None>
# A PEM encoded Certificate Authority to use when verifying
# HTTPs connections. Defaults to system CAs. (string value)
#cafile = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# The region in which the identity server can be found.
# (string value)
#region_name = <None>
# Optionally specify a list of memcached server(s) to use for
# caching. If left undefined, tokens will instead be cached
# in-process. (list value)
# Deprecated group/name - [keystone_authtoken]/memcache_servers
#memcached_servers = <None>
# In order to prevent excessive effort spent validating
# tokens, the middleware caches previously-seen tokens for a
# configurable duration (in seconds). Set to -1 to disable
# caching completely. (integer value)
#token_cache_time = 300
# (Optional) If defined, indicate whether token data should be
# authenticated or authenticated and encrypted. If MAC, token
# data is authenticated (with HMAC) in the cache. If ENCRYPT,
# token data is encrypted and authenticated in the cache. If
# the value is not one of these options or empty, auth_token
# will raise an exception on initialization. (string value)
# Possible values:
# None - <No description provided>
# MAC - <No description provided>
# ENCRYPT - <No description provided>
#memcache_security_strategy = None
# (Optional, mandatory if memcache_security_strategy is
# defined) This string is used for key derivation. (string
# value)
#memcache_secret_key = <None>
# (Optional) Number of seconds memcached server is considered
# dead before it is tried again. (integer value)
#memcache_pool_dead_retry = 300
# (Optional) Maximum total number of open connections to every
# memcached server. (integer value)
#memcache_pool_maxsize = 10
# (Optional) Socket timeout in seconds for communicating with
# a memcached server. (integer value)
#memcache_pool_socket_timeout = 3
# (Optional) Number of seconds a connection to memcached is
# held unused in the pool before it is closed. (integer value)
#memcache_pool_unused_timeout = 60
# (Optional) Number of seconds that an operation will wait to
# get a memcached client connection from the pool. (integer
# value)
#memcache_pool_conn_get_timeout = 10
# (Optional) Use the advanced (eventlet safe) memcached client
# pool. (boolean value)
#memcache_use_advanced_pool = true
# (Optional) Indicate whether to set the X-Service-Catalog
# header. If False, middleware will not ask for service
# catalog on token validation and will not set the X-Service-
# Catalog header. (boolean value)
#include_service_catalog = true
# Used to control the use and type of token binding. Can be
# set to: "disabled" to not check token binding. "permissive"
# (default) to validate binding information if the bind type
# is of a form known to the server and ignore it if not.
# "strict" like "permissive" but if the bind type is unknown
# the token will be rejected. "required" any form of token
# binding is needed to be allowed. Finally the name of a
# binding method that must be present in tokens. (string
# value)
#enforce_token_bind = permissive
# A choice of roles that must be present in a service token.
# Service tokens are allowed to request that an expired token
# can be used and so this check should tightly control that
# only actual services should be sending this token. Roles
# here are applied as an ANY check so any role in this list
# must be present. For backwards compatibility reasons this
# currently only affects the allow_expired check. (list value)
#service_token_roles = service
# For backwards compatibility reasons we must let valid
# service tokens pass that don't pass the service_token_roles
# check as valid. Setting this true will become the default in
# a future release and should be enabled if possible. (boolean
# value)
#service_token_roles_required = false
# The name or type of the service as it appears in the service
# catalog. This is used to validate tokens that have
# restricted access rules. (string value)
#service_type = <None>
# Authentication type to load (string value)
# Deprecated group/name - [keystone_authtoken]/auth_plugin
#auth_type = <None>
# Config Section from which to load plugin specific options
# (string value)
#auth_section = <None>
[mdns]
#
# From ironic_lib.mdns
#
# Number of attempts to register a service. Currently has to
# be larger than 1 because of race conditions in the zeroconf
# library. (integer value)
# Minimum value: 1
#registration_attempts = 5
# Number of attempts to lookup a service. (integer value)
# Minimum value: 1
#lookup_attempts = 3
# Additional parameters to pass for the registered service.
# (dict value)
#params =
# List of IP addresses of interfaces to use for mDNS. Defaults
# to all interfaces on the system. (list value)
#interfaces = <None>
[metrics]
#
# From ironic
#
# Backend for the agent ramdisk to use for metrics. Default
# possible backends are "noop" and "statsd". (string value)
#agent_backend = noop
# Prepend the hostname to all metric names sent by the agent
# ramdisk. The format of metric names is
# [global_prefix.][uuid.][host_name.]prefix.metric_name.
# (boolean value)
#agent_prepend_host = false
# Prepend the node's Ironic uuid to all metric names sent by
# the agent ramdisk. The format of metric names is
# [global_prefix.][uuid.][host_name.]prefix.metric_name.
# (boolean value)
#agent_prepend_uuid = false
# Split the prepended host value by "." and reverse it for
# metrics sent by the agent ramdisk (to better match the
# reverse hierarchical form of domain names). (boolean value)
#agent_prepend_host_reverse = true
# Prefix all metric names sent by the agent ramdisk with this
# value. The format of metric names is
# [global_prefix.][uuid.][host_name.]prefix.metric_name.
# (string value)
#agent_global_prefix = <None>
#
# From ironic_lib.metrics
#
# Backend to use for the metrics system. (string value)
# Possible values:
# noop - Do nothing in relation to metrics.
# statsd - Transmits metrics data to a statsd backend.
# collector - Collects metrics data and saves it in memory for
# use by the running application.
#backend = noop
# Prepend the hostname to all metric names. The format of
# metric names is
# [global_prefix.][host_name.]prefix.metric_name. (boolean
# value)
#prepend_host = false
# Split the prepended host value by "." and reverse it (to
# better match the reverse hierarchical form of domain names).
# (boolean value)
#prepend_host_reverse = true
# Prefix all metric names with this value. By default, there
# is no global prefix. The format of metric names is
# [global_prefix.][host_name.]prefix.metric_name. (string
# value)
#global_prefix = <None>
[metrics_statsd]
#
# From ironic
#
# Host for the agent ramdisk to use with the statsd backend.
# This must be accessible from networks the agent is booted
# on. (string value)
#agent_statsd_host = localhost
# Port for the agent ramdisk to use with the statsd backend.
# (port value)
# Minimum value: 0
# Maximum value: 65535
#agent_statsd_port = 8125
#
# From ironic_lib.metrics_statsd
#
# Host for use with the statsd backend. (string value)
#statsd_host = localhost
# Port to use with the statsd backend. (port value)
# Minimum value: 0
# Maximum value: 65535
#statsd_port = 8125
[molds]
#
# From ironic
#
# Configuration mold storage location. Supports "swift" and
# "http". By default "swift". (string value)
#storage = swift
# User for "http" Basic auth. By default set empty. (string
# value)
#user = <None>
# Password for "http" Basic auth. By default set empty.
# (string value)
#password = <None>
# Retry attempts for saving or getting configuration molds.
# (integer value)
#retry_attempts = 3
# Retry interval for saving or getting configuration molds.
# (integer value)
#retry_interval = 3
[neutron]
#
# From ironic
#
# Option to enable transmission of all ports to neutron when
# creating ports for provisioning, cleaning, or rescue. This
# is done without IP addresses assigned to the port, and may
# be useful in some bonded network configurations. (boolean
# value)
# Note: This option can be changed without restarting.
#add_all_ports = false
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [neutron]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying
# HTTPs connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Neutron network UUID or name for the ramdisk to be booted
# into for cleaning nodes. Required for "neutron" network
# interface. It is also required if cleaning nodes when using
# "flat" network interface or "neutron" DHCP provider. If a
# name is provided, it must be unique among all networks or
# cleaning will fail. (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [neutron]/cleaning_network_uuid
#cleaning_network = <None>
# List of Neutron Security Group UUIDs to be applied during
# cleaning of the nodes. Optional for the "neutron" network
# interface and not used for the "flat" or "noop" network
# interfaces. If not specified, default security group is
# used. (list value)
# Note: This option can be changed without restarting.
#cleaning_network_security_groups =
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection
# errors. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#connect_retry_delay = <None>
# Optional domain ID to use with v3 and v2 parameters. It will
# be used for both the user and project domain in v3 and
# ignored in v2 authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters.
# It will be used for both the user and project domain in v3
# and ignored in v2 authentication. (string value)
#default_domain_name = <None>
# Number of IPv6 addresses to allocate for ports created for
# provisioning, cleaning, rescue or inspection on
# DHCPv6-stateful networks. Different stages of the chain-
# loading process will request addresses with different
# CLID/IAID. Due to non-identical identifiers multiple
# addresses must be reserved for the host to ensure each step
# of the boot process can successfully lease addresses.
# (integer value)
# Note: This option can be changed without restarting.
#dhcpv6_stateful_address_count = 4
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client.
# NOTE: The unversioned endpoint should be specified here; to
# request a particular API version, use the `version`, `min-
# version`, and/or `max-version` options. (string value)
#endpoint_override = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# Neutron network UUID or name for the ramdisk to be booted
# into for in-band inspection of nodes. If a name is provided,
# it must be unique among all networks or inspection will
# fail. (string value)
# Note: This option can be changed without restarting.
#inspection_network = <None>
# List of Neutron Security Group UUIDs to be applied during
# the node inspection process. Optional for the "neutron"
# network interface and not used for the "flat" or "noop"
# network interfaces. If not specified, the default security
# group is used. (list value)
# Note: This option can be changed without restarting.
#inspection_network_security_groups =
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be
# used as the upper bound of a range with min_version.
# Mutually exclusive with version. (string value)
#max_version = <None>
# The minimum major version of a given API, intended to be
# used as the lower bound of a range with max_version.
# Mutually exclusive with version. If min_version is given
# with no max_version it is as if max version is "latest".
# (string value)
#min_version = <None>
# User's password (string value)
#password = <None>
# Delay value to wait for Neutron agents to setup sufficient
# DHCP configuration for port. (integer value)
# Minimum value: 0
# Note: This option can be changed without restarting.
#port_setup_delay = 0
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [neutron]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [neutron]/tenant_name
#project_name = <None>
# Neutron network UUID or name for the ramdisk to be booted
# into for provisioning nodes. Required for "neutron" network
# interface. If a name is provided, it must be unique among
# all networks or deploy will fail. (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [neutron]/provisioning_network_uuid
#provisioning_network = <None>
# List of Neutron Security Group UUIDs to be applied during
# provisioning of the nodes. Optional for the "neutron"
# network interface and not used for the "flat" or "noop"
# network interfaces. If not specified, default security group
# is used. (list value)
# Note: This option can be changed without restarting.
#provisioning_network_security_groups =
# The default region_name for endpoint URL discovery. (string
# value)
#region_name = <None>
# Timeout for request processing when interacting with
# Neutron. This value should be increased if neutron port
# action timeouts are observed as neutron performs pre-commit
# validation prior returning to the API client which can take
# longer than normal client/server interactions. (integer
# value)
# Note: This option can be changed without restarting.
#request_timeout = 45
# Neutron network UUID or name for booting the ramdisk for
# rescue mode. This is not the network that the rescue ramdisk
# will use post-boot -- the tenant network is used for that.
# Required for "neutron" network interface, if rescue mode
# will be used. It is not used for the "flat" or "noop"
# network interfaces. If a name is provided, it must be unique
# among all networks or rescue will fail. (string value)
# Note: This option can be changed without restarting.
#rescuing_network = <None>
# List of Neutron Security Group UUIDs to be applied during
# the node rescue process. Optional for the "neutron" network
# interface and not used for the "flat" or "noop" network
# interfaces. If not specified, the default security group is
# used. (list value)
# Note: This option can be changed without restarting.
#rescuing_network_security_groups =
# DEPRECATED: Client retries in the case of a failed request.
# (integer value)
# Note: This option can be changed without restarting.
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by status_code_retries and
# status_code_retry_delay.
#retries = 3
# The default service_name for endpoint URL discovery. (string
# value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string
# value)
#service_type = network
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for
# retriable HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status
# codes. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#status_code_retry_delay = <None>
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [neutron]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint
# URL. (list value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version
# for endpoint URL discovery. Mutually exclusive with
# min_version and max_version (string value)
#version = <None>
[nova]
#
# From ironic
#
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [nova]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying
# HTTPs connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection
# errors. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#connect_retry_delay = <None>
# Optional domain ID to use with v3 and v2 parameters. It will
# be used for both the user and project domain in v3 and
# ignored in v2 authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters.
# It will be used for both the user and project domain in v3
# and ignored in v2 authentication. (string value)
#default_domain_name = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client.
# NOTE: The unversioned endpoint should be specified here; to
# request a particular API version, use the `version`, `min-
# version`, and/or `max-version` options. (string value)
#endpoint_override = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be
# used as the upper bound of a range with min_version.
# Mutually exclusive with version. (string value)
#max_version = <None>
# The minimum major version of a given API, intended to be
# used as the lower bound of a range with max_version.
# Mutually exclusive with version. If min_version is given
# with no max_version it is as if max version is "latest".
# (string value)
#min_version = <None>
# User's password (string value)
#password = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [nova]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [nova]/tenant_name
#project_name = <None>
# The default region_name for endpoint URL discovery. (string
# value)
#region_name = <None>
# When set to True, it will enable the support for power state
# change callbacks to nova. This option should be set to False
# in deployments that do not have the openstack compute
# service. (boolean value)
# Note: This option can be changed without restarting.
#send_power_notifications = true
# The default service_name for endpoint URL discovery. (string
# value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string
# value)
#service_type = compute
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for
# retriable HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status
# codes. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#status_code_retry_delay = <None>
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [nova]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint
# URL. (list value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version
# for endpoint URL discovery. Mutually exclusive with
# min_version and max_version (string value)
#version = <None>
[oslo_concurrency]
#
# From oslo.concurrency
#
# Enables or disables inter-process locks. (boolean value)
#disable_process_locking = false
# Directory to use for lock files. For security, the
# specified directory should only be writable by the user
# running the processes that need locking. Defaults to
# environment variable OSLO_LOCK_PATH. If external locks are
# used, a lock path must be set. (string value)
#lock_path = <None>
[oslo_messaging_amqp]
#
# From oslo.messaging
#
# Name for the AMQP container. must be globally unique.
# Defaults to a generated UUID (string value)
#container_name = <None>
# Timeout for inactive connections (in seconds) (integer
# value)
#idle_timeout = 0
# Debug: dump AMQP frames to stdout (boolean value)
#trace = false
# Attempt to connect via SSL. If no other ssl-related
# parameters are given, it will use the system's CA-bundle to
# verify the server's certificate. (boolean value)
#ssl = false
# CA certificate PEM file used to verify the server's
# certificate (string value)
#ssl_ca_file =
# Self-identifying certificate PEM file for client
# authentication (string value)
#ssl_cert_file =
# Private key PEM file used to sign ssl_cert_file certificate
# (optional) (string value)
#ssl_key_file =
# Password for decrypting ssl_key_file (if encrypted) (string
# value)
#ssl_key_password = <None>
# By default SSL checks that the name in the server's
# certificate matches the hostname in the transport_url. In
# some configurations it may be preferable to use the virtual
# hostname instead, for example if the server uses the Server
# Name Indication TLS extension (rfc6066) to provide a
# certificate per virtual host. Set ssl_verify_vhost to True
# if the server's SSL certificate uses the virtual host name
# instead of the DNS name. (boolean value)
#ssl_verify_vhost = false
# Space separated list of acceptable SASL mechanisms (string
# value)
#sasl_mechanisms =
# Path to directory that contains the SASL configuration
# (string value)
#sasl_config_dir =
# Name of configuration file (without .conf suffix) (string
# value)
#sasl_config_name =
# SASL realm to use if no realm present in username (string
# value)
#sasl_default_realm =
# Seconds to pause before attempting to re-connect. (integer
# value)
# Minimum value: 1
#connection_retry_interval = 1
# Increase the connection_retry_interval by this many seconds
# after each unsuccessful failover attempt. (integer value)
# Minimum value: 0
#connection_retry_backoff = 2
# Maximum limit for connection_retry_interval +
# connection_retry_backoff (integer value)
# Minimum value: 1
#connection_retry_interval_max = 30
# Time to pause between re-connecting an AMQP 1.0 link that
# failed due to a recoverable error. (integer value)
# Minimum value: 1
#link_retry_delay = 10
# The maximum number of attempts to re-send a reply message
# which failed due to a recoverable error. (integer value)
# Minimum value: -1
#default_reply_retry = 0
# The deadline for an rpc reply message delivery. (integer
# value)
# Minimum value: 5
#default_reply_timeout = 30
# The deadline for an rpc cast or call message delivery. Only
# used when caller does not provide a timeout expiry. (integer
# value)
# Minimum value: 5
#default_send_timeout = 30
# The deadline for a sent notification message delivery. Only
# used when caller does not provide a timeout expiry. (integer
# value)
# Minimum value: 5
#default_notify_timeout = 30
# The duration to schedule a purge of idle sender links.
# Detach link after expiry. (integer value)
# Minimum value: 1
#default_sender_link_timeout = 600
# Indicates the addressing mode used by the driver.
# Permitted values:
# 'legacy' - use legacy non-routable addressing
# 'routable' - use routable addresses
# 'dynamic' - use legacy addresses if the message bus does
# not support routing otherwise use routable addressing
# (string value)
#addressing_mode = dynamic
# Enable virtual host support for those message buses that do
# not natively support virtual hosting (such as qpidd). When
# set to true the virtual host name will be added to all
# message bus addresses, effectively creating a private
# 'subnet' per virtual host. Set to False if the message bus
# supports virtual hosting using the 'hostname' field in the
# AMQP 1.0 Open performative as the name of the virtual host.
# (boolean value)
#pseudo_vhost = true
# address prefix used when sending to a specific server
# (string value)
#server_request_prefix = exclusive
# address prefix used when broadcasting to all servers (string
# value)
#broadcast_prefix = broadcast
# address prefix when sending to any server in group (string
# value)
#group_request_prefix = unicast
# Address prefix for all generated RPC addresses (string
# value)
#rpc_address_prefix = openstack.org/om/rpc
# Address prefix for all generated Notification addresses
# (string value)
#notify_address_prefix = openstack.org/om/notify
# Appended to the address prefix when sending a fanout
# message. Used by the message bus to identify fanout
# messages. (string value)
#multicast_address = multicast
# Appended to the address prefix when sending to a particular
# RPC/Notification server. Used by the message bus to identify
# messages sent to a single destination. (string value)
#unicast_address = unicast
# Appended to the address prefix when sending to a group of
# consumers. Used by the message bus to identify messages that
# should be delivered in a round-robin fashion across
# consumers. (string value)
#anycast_address = anycast
# Exchange name used in notification addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_notification_exchange if set
# else control_exchange if set
# else 'notify' (string value)
#default_notification_exchange = <None>
# Exchange name used in RPC addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_rpc_exchange if set
# else control_exchange if set
# else 'rpc' (string value)
#default_rpc_exchange = <None>
# Window size for incoming RPC Reply messages. (integer value)
# Minimum value: 1
#reply_link_credit = 200
# Window size for incoming RPC Request messages (integer
# value)
# Minimum value: 1
#rpc_server_credit = 100
# Window size for incoming Notification messages (integer
# value)
# Minimum value: 1
#notify_server_credit = 100
# Send messages of this type pre-settled.
# Pre-settled messages will not receive acknowledgement
# from the peer. Note well: pre-settled messages may be
# silently discarded if the delivery fails.
# Permitted values:
# 'rpc-call' - send RPC Calls pre-settled
# 'rpc-reply'- send RPC Replies pre-settled
# 'rpc-cast' - Send RPC Casts pre-settled
# 'notify' - Send Notifications pre-settled
# (multi valued)
#pre_settled = rpc-cast
#pre_settled = rpc-reply
[oslo_messaging_kafka]
#
# From oslo.messaging
#
# Max fetch bytes of Kafka consumer (integer value)
#kafka_max_fetch_bytes = 1048576
# Default timeout(s) for Kafka consumers (floating point
# value)
#kafka_consumer_timeout = 1.0
# DEPRECATED: Pool Size for Kafka Consumers (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#pool_size = 10
# DEPRECATED: The pool size limit for connections expiration
# policy (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#conn_pool_min_size = 2
# DEPRECATED: The time-to-live in sec of idle connections in
# the pool (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#conn_pool_ttl = 1200
# Group id for Kafka consumer. Consumers in one group will
# coordinate message consumption (string value)
#consumer_group = oslo_messaging_consumer
# Upper bound on the delay for KafkaProducer batching in
# seconds (floating point value)
#producer_batch_timeout = 0.0
# Size of batch for the producer async send (integer value)
#producer_batch_size = 16384
# The compression codec for all data generated by the
# producer. If not set, compression will not be used. Note
# that the allowed values of this depend on the kafka version
# (string value)
# Possible values:
# none - <No description provided>
# gzip - <No description provided>
# snappy - <No description provided>
# lz4 - <No description provided>
# zstd - <No description provided>
#compression_codec = none
# Enable asynchronous consumer commits (boolean value)
#enable_auto_commit = false
# The maximum number of records returned in a poll call
# (integer value)
#max_poll_records = 500
# Protocol used to communicate with brokers (string value)
# Possible values:
# PLAINTEXT - <No description provided>
# SASL_PLAINTEXT - <No description provided>
# SSL - <No description provided>
# SASL_SSL - <No description provided>
#security_protocol = PLAINTEXT
# Mechanism when security protocol is SASL (string value)
#sasl_mechanism = PLAIN
# CA certificate PEM file used to verify the server
# certificate (string value)
#ssl_cafile =
# Client certificate PEM file used for authentication. (string
# value)
#ssl_client_cert_file =
# Client key PEM file used for authentication. (string value)
#ssl_client_key_file =
# Client key password file used for authentication. (string
# value)
#ssl_client_key_password =
[oslo_messaging_notifications]
#
# From oslo.messaging
#
# The Drivers(s) to handle sending notifications. Possible
# values are messaging, messagingv2, routing, log, test, noop
# (multi valued)
# Deprecated group/name - [DEFAULT]/notification_driver
#driver =
# A URL representing the messaging driver to use for
# notifications. If not set, we fall back to the same
# configuration used for RPC. (string value)
# Deprecated group/name - [DEFAULT]/notification_transport_url
#transport_url = <None>
# AMQP topic used for OpenStack notifications. (list value)
# Deprecated group/name - [rpc_notifier2]/topics
# Deprecated group/name - [DEFAULT]/notification_topics
#topics = notifications
# The maximum number of attempts to re-send a notification
# message which failed to be delivered due to a recoverable
# error. 0 - No retry, -1 - indefinite (integer value)
#retry = -1
[oslo_messaging_rabbit]
#
# From oslo.messaging
#
# Use durable queues in AMQP. If rabbit_quorum_queue is
# enabled, queues will be durable and this value will be
# ignored. (boolean value)
#amqp_durable_queues = false
# Auto-delete queues in AMQP. (boolean value)
#amqp_auto_delete = false
# Connect over SSL. (boolean value)
# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
#ssl = false
# SSL version to use (valid only if SSL enabled). Valid values
# are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may
# be available on some distributions. (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
#ssl_version =
# SSL key file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
#ssl_key_file =
# SSL cert file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
#ssl_cert_file =
# SSL certification authority file (valid only if SSL
# enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
#ssl_ca_file =
# Global toggle for enforcing the OpenSSL FIPS mode. This
# feature requires Python support. This is available in Python
# 3.9 in all environments and may have been backported to
# older Python versions on select environments. If the Python
# executable used does not support OpenSSL FIPS mode, an
# exception will be raised. (boolean value)
#ssl_enforce_fips_mode = false
# Run the health check heartbeat thread through a native
# python thread by default. If this option is equal to False
# then the health check heartbeat will inherit the execution
# model from the parent process. For example if the parent
# process has monkey patched the stdlib by using
# eventlet/greenlet then the heartbeat will be run through a
# green thread. This option should be set to True only for the
# wsgi services. (boolean value)
#heartbeat_in_pthread = false
# How long to wait (in seconds) before reconnecting in
# response to an AMQP consumer cancel notification. (floating
# point value)
# Minimum value: 0.0
# Maximum value: 4.5
#kombu_reconnect_delay = 1.0
# EXPERIMENTAL: Possible values are: gzip, bz2. If not set
# compression will not be used. This option may not be
# available in future versions. (string value)
#kombu_compression = <None>
# How long to wait a missing client before abandoning to send
# it its replies. This value should not be longer than
# rpc_response_timeout. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60
# Determines how the next RabbitMQ node is chosen in case the
# one we are currently connected to becomes unavailable. Takes
# effect only if more than one RabbitMQ node is provided in
# config. (string value)
# Possible values:
# round-robin - <No description provided>
# shuffle - <No description provided>
#kombu_failover_strategy = round-robin
# The RabbitMQ login method. (string value)
# Possible values:
# PLAIN - <No description provided>
# AMQPLAIN - <No description provided>
# EXTERNAL - <No description provided>
# RABBIT-CR-DEMO - <No description provided>
#rabbit_login_method = AMQPLAIN
# How frequently to retry connecting with RabbitMQ. (integer
# value)
#rabbit_retry_interval = 1
# How long to backoff for between retries when connecting to
# RabbitMQ. (integer value)
#rabbit_retry_backoff = 2
# Maximum interval of RabbitMQ connection retries. Default is
# 30 seconds. (integer value)
#rabbit_interval_max = 30
# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you
# change this option, you must wipe the RabbitMQ database. In
# RabbitMQ 3.0, queue mirroring is no longer controlled by the
# x-ha-policy argument when declaring a queue. If you just
# want to make sure that all queues (except those with auto-
# generated names) are mirrored across all nodes, run:
# "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-mode":
# "all"}' " (boolean value)
#rabbit_ha_queues = false
# Use quorum queues in RabbitMQ (x-queue-type: quorum). The
# quorum queue is a modern queue type for RabbitMQ
# implementing a durable, replicated FIFO queue based on the
# Raft consensus algorithm. It is available as of RabbitMQ
# 3.8.0. If set this option will conflict with the HA queues
# (``rabbit_ha_queues``) aka mirrored queues, in other words
# the HA queues should be disabled, quorum queues durable by
# default so the amqp_durable_queues opion is ignored when
# this option enabled. (boolean value)
#rabbit_quorum_queue = false
# Each time a message is redelivered to a consumer, a counter
# is incremented. Once the redelivery count exceeds the
# delivery limit the message gets dropped or dead-lettered (if
# a DLX exchange has been configured) Used only when
# rabbit_quorum_queue is enabled, Default 0 which means dont
# set a limit. (integer value)
#rabbit_quorum_delivery_limit = 0
# By default all messages are maintained in memory if a quorum
# queue grows in length it can put memory pressure on a
# cluster. This option can limit the number of messages in the
# quorum queue. Used only when rabbit_quorum_queue is enabled,
# Default 0 which means dont set a limit. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_quroum_max_memory_length
#rabbit_quorum_max_memory_length = 0
# By default all messages are maintained in memory if a quorum
# queue grows in length it can put memory pressure on a
# cluster. This option can limit the number of memory bytes
# used by the quorum queue. Used only when rabbit_quorum_queue
# is enabled, Default 0 which means dont set a limit. (integer
# value)
# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_quroum_max_memory_bytes
#rabbit_quorum_max_memory_bytes = 0
# Positive integer representing duration in seconds for queue
# TTL (x-expires). Queues which are unused for the duration of
# the TTL are automatically deleted. The parameter affects
# only reply and fanout queues. (integer value)
# Minimum value: 1
#rabbit_transient_queues_ttl = 1800
# Specifies the number of messages to prefetch. Setting to
# zero allows unlimited messages. (integer value)
#rabbit_qos_prefetch_count = 0
# Number of seconds after which the Rabbit broker is
# considered down if heartbeat's keep-alive fails (0 disables
# heartbeat). (integer value)
#heartbeat_timeout_threshold = 60
# How often times during the heartbeat_timeout_threshold we
# check the heartbeat. (integer value)
#heartbeat_rate = 2
# DEPRECATED: (DEPRECATED) Enable/Disable the RabbitMQ
# mandatory flag for direct send. The direct send is used as
# reply, so the MessageUndeliverable exception is raised in
# case the client queue does not exist.MessageUndeliverable
# exception will be used to loop for a timeout to lets a
# chance to sender to recover.This flag is deprecated and it
# will not be possible to deactivate this functionality
# anymore (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Mandatory flag no longer deactivable.
#direct_mandatory_flag = true
# Enable x-cancel-on-ha-failover flag so that rabbitmq server
# will cancel and notify consumerswhen queue is down (boolean
# value)
#enable_cancel_on_failover = false
[oslo_middleware]
#
# From oslo.middleware.http_proxy_to_wsgi
#
# Whether the application is behind a proxy or not. This
# determines if the middleware should parse the headers or
# not. (boolean value)
#enable_proxy_headers_parsing = false
[oslo_policy]
#
# From oslo.policy
#
# This option controls whether or not to enforce scope when
# evaluating policies. If ``True``, the scope of the token
# used in the request is compared to the ``scope_types`` of
# the policy being enforced. If the scopes do not match, an
# ``InvalidScope`` exception will be raised. If ``False``, a
# message will be logged informing operators that policies are
# being invoked with mismatching scope. (boolean value)
#enforce_scope = false
# This option controls whether or not to use old deprecated
# defaults when evaluating policies. If ``True``, the old
# deprecated defaults are not going to be evaluated. This
# means if any existing token is allowed for old defaults but
# is disallowed for new defaults, it will be disallowed. It is
# encouraged to enable this flag along with the
# ``enforce_scope`` flag so that you can get the benefits of
# new defaults and ``scope_type`` together. If ``False``, the
# deprecated policy check string is logically OR'd with the
# new policy check string, allowing for a graceful upgrade
# experience between releases with new policies, which is the
# default behavior. (boolean value)
#enforce_new_defaults = false
# The relative or absolute path of a file that maps roles to
# permissions for a given service. Relative paths must be
# specified in relation to the configuration file setting this
# option. (string value)
#policy_file = policy.yaml
# Default rule. Enforced when a requested rule is not found.
# (string value)
#policy_default_rule = default
# Directories where policy configuration files are stored.
# They can be relative to any directory in the search path
# defined by the config_dir option, or absolute paths. The
# file defined by policy_file must exist for these directories
# to be searched. Missing or empty directories are ignored.
# (multi valued)
#policy_dirs = policy.d
# Content Type to send and receive data for REST based policy
# check (string value)
# Possible values:
# application/x-www-form-urlencoded - <No description
# provided>
# application/json - <No description provided>
#remote_content_type = application/x-www-form-urlencoded
# server identity verification for REST based policy check
# (boolean value)
#remote_ssl_verify_server_crt = false
# Absolute path to ca cert file for REST based policy check
# (string value)
#remote_ssl_ca_crt_file = <None>
# Absolute path to client cert for REST based policy check
# (string value)
#remote_ssl_client_crt_file = <None>
# Absolute path client key file REST based policy check
# (string value)
#remote_ssl_client_key_file = <None>
[profiler]
#
# From osprofiler
#
#
# Enable the profiling for all services on this node.
#
# Default value is False (fully disable the profiling
# feature).
#
# Possible values:
#
# * True: Enables the feature
# * False: Disables the feature. The profiling cannot be
# started via this project
# operations. If the profiling is triggered by another
# project, this project
# part will be empty.
# (boolean value)
# Deprecated group/name - [profiler]/profiler_enabled
#enabled = false
#
# Enable SQL requests profiling in services.
#
# Default value is False (SQL requests won't be traced).
#
# Possible values:
#
# * True: Enables SQL requests profiling. Each SQL query will
# be part of the
# trace and can the be analyzed by how much time was spent
# for that.
# * False: Disables SQL requests profiling. The spent time is
# only shown on a
# higher level of operations. Single SQL queries cannot be
# analyzed this way.
# (boolean value)
#trace_sqlalchemy = false
#
# Secret key(s) to use for encrypting context data for
# performance profiling.
#
# This string value should have the following format:
# <key1>[,<key2>,...<keyn>],
# where each key is some random string. A user who triggers
# the profiling via
# the REST API has to set one of these keys in the headers of
# the REST API call
# to include profiling results of this node for this
# particular project.
#
# Both "enabled" flag and "hmac_keys" config options should be
# set to enable
# profiling. Also, to generate correct profiling information
# across all services
# at least one key needs to be consistent between OpenStack
# projects. This
# ensures it can be used from client side to generate the
# trace, containing
# information from all possible resources.
# (string value)
#hmac_keys = SECRET_KEY
#
# Connection string for a notifier backend.
#
# Default value is ``messaging://`` which sets the notifier to
# oslo_messaging.
#
# Examples of possible values:
#
# * ``messaging://`` - use oslo_messaging driver for sending
# spans.
# * ``redis://127.0.0.1:6379`` - use redis driver for sending
# spans.
# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for
# sending spans.
# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch
# driver for sending
# spans.
# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver
# for sending spans.
# (string value)
#connection_string = messaging://
#
# Document type for notification indexing in elasticsearch.
# (string value)
#es_doc_type = notification
#
# This parameter is a time value parameter (for example:
# es_scroll_time=2m),
# indicating for how long the nodes that participate in the
# search will maintain
# relevant resources in order to continue and support it.
# (string value)
#es_scroll_time = 2m
#
# Elasticsearch splits large requests in batches. This
# parameter defines
# maximum size of each batch (for example:
# es_scroll_size=10000).
# (integer value)
#es_scroll_size = 10000
#
# Redissentinel provides a timeout option on the connections.
# This parameter defines that timeout (for example:
# socket_timeout=0.1).
# (floating point value)
#socket_timeout = 0.1
#
# Redissentinel uses a service name to identify a master redis
# service.
# This parameter defines the name (for example:
# ``sentinal_service_name=mymaster``).
# (string value)
#sentinel_service_name = mymaster
#
# Enable filter traces that contain error/exception to a
# separated place.
#
# Default value is set to False.
#
# Possible values:
#
# * True: Enable filter traces that contain error/exception.
# * False: Disable the filter.
# (boolean value)
#filter_error_trace = false
[pxe]
#
# From ironic
#
# Additional append parameters for baremetal PXE boot. (string
# value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [pxe]/pxe_append_params
#kernel_append_params = nofb nomodeset vga=normal
# Default file system format for ephemeral partition, if one
# is created. (string value)
# Note: This option can be changed without restarting.
#default_ephemeral_format = ext4
# On the ironic-conductor node, directory where images are
# stored on disk. (string value)
#images_path = /var/lib/ironic/images/
# On the ironic-conductor node, directory where master
# instance images are stored on disk. Setting to the empty
# string disables image caching. (string value)
#instance_master_path = /var/lib/ironic/master_images
# Maximum size (in MiB) of cache for master images, including
# those in use. (integer value)
#image_cache_size = 20480
# Maximum TTL (in minutes) for old master images in cache.
# (integer value)
#image_cache_ttl = 10080
# On ironic-conductor node, template file for PXE loader
# configuration. (string value)
# Note: This option can be changed without restarting.
#pxe_config_template = $pybasedir/drivers/modules/pxe_config.template
# On ironic-conductor node, template file for iPXE operations.
# (string value)
# Note: This option can be changed without restarting.
#ipxe_config_template = $pybasedir/drivers/modules/ipxe_config.template
# On ironic-conductor node, template file for PXE
# configuration for UEFI boot loader. Generally this is used
# for GRUB specific templates. (string value)
# Note: This option can be changed without restarting.
#uefi_pxe_config_template = $pybasedir/drivers/modules/pxe_grub_config.template
# On ironic-conductor node, template file for PXE
# configuration per node architecture. For example:
# aarch64:/opt/share/grubaa64_pxe_config.template (dict value)
# Note: This option can be changed without restarting.
#pxe_config_template_by_arch =
# IP address of ironic-conductor node's TFTP server. (string
# value)
#tftp_server = $my_ip
# ironic-conductor node's TFTP root path. The ironic-conductor
# must have read/write access to this path. (string value)
#tftp_root = /tftpboot
# On ironic-conductor node, directory where master TFTP images
# are stored on disk. Setting to the empty string disables
# image caching. (string value)
#tftp_master_path = /tftpboot/master_images
# The permission that will be applied to the TFTP folders upon
# creation. This should be set to the permission such that the
# tftpserver has access to read the contents of the configured
# TFTP folder. This setting is only required when the
# operating system's umask is restrictive such that ironic-
# conductor is creating files that cannot be read by the TFTP
# server. Setting to <None> will result in the operating
# system's umask to be utilized for the creation of new tftp
# folders. The system default umask is masked out on the
# specified value. It is required that an octal representation
# is specified. For example: 0o755 (integer value)
#dir_permission = <None>
# The permission which is used on files created as part of
# configuration and setup of file assets for PXE based
# operations. Defaults to a value of 0o644. This value must be
# specified as an octal representation. For example: 0o644
# (integer value)
#file_permission = 420
# Bootfile DHCP parameter. (string value)
#pxe_bootfile_name = pxelinux.0
# Directory in which to create symbolic links which represent
# the MAC or IP address of the ports on a node and allow boot
# loaders to load the PXE file for the node. This directory
# name is relative to the PXE or iPXE folders. (string value)
#pxe_config_subdir = pxelinux.cfg
# Bootfile DHCP parameter for UEFI boot mode. (string value)
#uefi_pxe_bootfile_name = bootx64.efi
# Bootfile DHCP parameter. (string value)
#ipxe_bootfile_name = undionly.kpxe
# Bootfile DHCP parameter for UEFI boot mode. If you
# experience problems with booting using it, try ipxe.efi.
# (string value)
#uefi_ipxe_bootfile_name = snponly.efi
# Bootfile DHCP parameter per node architecture. For example:
# aarch64:grubaa64.efi (dict value)
#pxe_bootfile_name_by_arch =
# Bootfile DHCP parameter per node architecture. For example:
# aarch64:ipxe_aa64.efi (dict value)
#ipxe_bootfile_name_by_arch =
# On ironic-conductor node, the path to the main iPXE script
# file. (string value)
#ipxe_boot_script = $pybasedir/drivers/modules/boot.ipxe
# File name (e.g. inspector.ipxe) of an iPXE script to fall
# back to when booting to a MAC-specific script fails. When
# not set, booting will fail in this case. (string value)
#ipxe_fallback_script = <None>
# Timeout value (in seconds) for downloading an image via
# iPXE. Defaults to 0 (no timeout) (integer value)
#ipxe_timeout = 0
# Timeout (in seconds) after which PXE boot should be retried.
# Must be less than [conductor]deploy_callback_timeout.
# Disabled by default. (integer value)
# Minimum value: 60
#boot_retry_timeout = <None>
# Interval (in seconds) between periodic checks on PXE boot
# retry. Has no effect if boot_retry_timeout is not set.
# (integer value)
# Minimum value: 1
#boot_retry_check_interval = 90
# DEPRECATED: The IP version that will be used for PXE
# booting. Defaults to 4. This option has been a no-op for in-
# treedrivers since the Ussuri development cycle. (string
# value)
# Possible values:
# 4 - IPv4
# 6 - IPv6
# Note: This option can be changed without restarting.
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#ip_version = 4
# Download deploy and rescue images directly from swift using
# temporary URLs. If set to false (default), images are
# downloaded to the ironic-conductor node and served over its
# local HTTP server. Applicable only when 'ipxe' compatible
# boot interface is used. (boolean value)
# Note: This option can be changed without restarting.
#ipxe_use_swift = false
# If True, generate a PXE environment even for nodes that use
# local boot. This is useful when the driver cannot switch
# nodes to local boot, e.g. with SNMP or with Redfish on
# machines that cannot do persistent boot. Mostly useful for
# standalone ironic since Neutron will prevent incorrect PXE
# boot. (boolean value)
# Note: This option can be changed without restarting.
#enable_netboot_fallback = false
# Dictionary describing the bootloaders to load into conductor
# PXE/iPXE boot folders values from the host operating system.
# Formatted as key of destination file name, and value of a
# full path to a file to be copied. File assets will have
# [pxe]file_permission applied, if set. If used, the file
# names should match established bootloader configuration
# settings for bootloaders. Use example:
# ipxe.efi:/usr/share/ipxe/ipxe-
# snponly-x86_64.efi,undionly.kpxe:/usr/share/ipxe/undionly.kpxe
# (dict value)
#loader_file_paths =
# On ironic-conductor node, the path to the initial
# grubconfiguration template for grub network boot. (string
# value)
#initial_grub_template = $pybasedir/drivers/modules/initial_grub_cfg.template
[redfish]
#
# From ironic
#
# Maximum number of attempts to try to connect to Redfish
# (integer value)
# Minimum value: 1
#connection_attempts = 5
# Number of seconds to wait between attempts to connect to
# Redfish (integer value)
# Minimum value: 1
#connection_retry_interval = 4
# Maximum Redfish client connection cache size. Redfish driver
# would strive to reuse authenticated BMC connections
# (obtained through Redfish Session Service). This option caps
# the maximum number of connections to maintain. The value of
# `0` disables client connection caching completely. (integer
# value)
# Minimum value: 0
#connection_cache_size = 1000
# Redfish HTTP client authentication method. (string value)
# Possible values:
# basic - Use HTTP basic authentication
# session - Use HTTP session authentication
# auto - Try HTTP session authentication first, fall back to
# basic HTTP authentication
#auth_type = auto
# Upload generated ISO images for virtual media boot to Swift,
# then pass temporary URL to BMC for booting the node. If set
# to false, images are placed on the ironic-conductor node and
# served over its local HTTP server. (boolean value)
# Note: This option can be changed without restarting.
#use_swift = true
# The Swift container to store Redfish driver data. Applies
# only when `use_swift` is enabled. (string value)
# Note: This option can be changed without restarting.
#swift_container = ironic_redfish_container
# Amount of time in seconds for Swift objects to auto-expire.
# Applies only when `use_swift` is enabled. (integer value)
# Note: This option can be changed without restarting.
#swift_object_expiry_timeout = 900
# Additional kernel parameters to pass down to the instance
# kernel. These parameters can be consumed by the kernel or by
# the applications by reading /proc/cmdline. Mind severe
# cmdline size limit! Can be overridden by
# `instance_info/kernel_append_params` property. (string
# value)
# Note: This option can be changed without restarting.
#kernel_append_params = nofb nomodeset vga=normal
# File permission for swift-less image hosting with the octal
# permission representation of file access permissions. This
# setting defaults to ``644``, or as the octal number
# ``0o644`` in Python. This setting must be set to the octal
# number representation, meaning starting with ``0o``.
# (integer value)
#file_permission = 420
# Number of seconds to wait between checking for completed
# firmware update tasks (integer value)
# Minimum value: 0
#firmware_update_status_interval = 60
# Number of seconds to wait between checking for failed
# firmware update tasks (integer value)
# Minimum value: 0
#firmware_update_fail_interval = 60
# Specifies how firmware image should be served. Whether from
# its original location using the firmware source URL
# directly, or should serve it from ironic's Swift or HTTP
# server. (string value)
# Possible values:
# http - If firmware source URL is also HTTP, then serve from
# original location, otherwise copy to ironic's HTTP server.
# Default.
# local - Download from original location and server from
# ironic's HTTP server.
# swift - If firmware source URL is also Swift, serve from
# original location, otherwise copy to ironic's Swift server.
# Note: This option can be changed without restarting.
#firmware_source = http
# Number of seconds to wait between checking for completed
# raid config tasks (integer value)
# Minimum value: 0
#raid_config_status_interval = 60
# Number of seconds to wait between checking for failed raid
# config tasks (integer value)
# Minimum value: 0
#raid_config_fail_interval = 60
[sensor_data]
#
# From ironic
#
# Enable sending sensor data message via the notification bus.
# (boolean value)
# Deprecated group/name - [conductor]/send_sensor_data
#send_sensor_data = false
# Seconds between conductor sending sensor data message via
# the notification bus. This was originally for consumption
# via ceilometer, but the data may also be consumed via a
# plugin like ironic-prometheus-exporter or any other message
# bus data collector. (integer value)
# Minimum value: 1
# Deprecated group/name - [conductor]/send_sensor_data_interval
#interval = 600
# The maximum number of workers that can be started
# simultaneously for send data from sensors periodic task.
# (integer value)
# Minimum value: 1
# Deprecated group/name - [conductor]/send_sensor_data_workers
#workers = 4
# The time in seconds to wait for send sensors data periodic
# task to be finished before allowing periodic call to happen
# again. Should be less than send_sensor_data_interval value.
# (integer value)
# Deprecated group/name - [conductor]/send_sensor_data_wait_timeout
#wait_timeout = 300
# List of comma separated meter types which need to be sent to
# Ceilometer. The default value, "ALL", is a special value
# meaning send all the sensor data. This setting only applies
# to baremetal sensor data being processed through the
# conductor. (list value)
# Deprecated group/name - [conductor]/send_sensor_data_types
#data_types = ALL
# The default for sensor data collection is to only collect
# data for machines that are deployed, however operators may
# desire to know if there are failures in hardware that is not
# presently in use. When set to true, the conductor will
# collect sensor information from all nodes when sensor data
# collection is enabled via the send_sensor_data setting.
# (boolean value)
# Deprecated group/name - [conductor]/send_sensor_data_for_undeployed_nodes
#enable_for_undeployed_nodes = false
# If to include sensor metric data for the Conductor process
# itself in the message payload for sensor data which allows
# operators to gather instance counts of actions and states to
# better manage the deployment. (boolean value)
#enable_for_conductor = true
# If to transmit any sensor data for any nodes under this
# conductor's management. This option superceeds the
# ``send_sensor_data_for_undeployed_nodes`` setting. (boolean
# value)
#enable_for_nodes = true
[service_catalog]
#
# From ironic
#
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [service_catalog]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying
# HTTPs connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection
# errors. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#connect_retry_delay = <None>
# Optional domain ID to use with v3 and v2 parameters. It will
# be used for both the user and project domain in v3 and
# ignored in v2 authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters.
# It will be used for both the user and project domain in v3
# and ignored in v2 authentication. (string value)
#default_domain_name = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client.
# NOTE: The unversioned endpoint should be specified here; to
# request a particular API version, use the `version`, `min-
# version`, and/or `max-version` options. (string value)
#endpoint_override = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be
# used as the upper bound of a range with min_version.
# Mutually exclusive with version. (string value)
#max_version = <None>
# The minimum major version of a given API, intended to be
# used as the lower bound of a range with max_version.
# Mutually exclusive with version. If min_version is given
# with no max_version it is as if max version is "latest".
# (string value)
#min_version = <None>
# User's password (string value)
#password = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [service_catalog]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [service_catalog]/tenant_name
#project_name = <None>
# The default region_name for endpoint URL discovery. (string
# value)
#region_name = <None>
# The default service_name for endpoint URL discovery. (string
# value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string
# value)
#service_type = baremetal
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for
# retriable HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status
# codes. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#status_code_retry_delay = <None>
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [service_catalog]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint
# URL. (list value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version
# for endpoint URL discovery. Mutually exclusive with
# min_version and max_version (string value)
#version = <None>
[snmp]
#
# From ironic
#
# Seconds to wait for power action to be completed (integer
# value)
#power_timeout = 10
# Time (in seconds) to sleep between when rebooting (powering
# off and on again) (integer value)
# Minimum value: 0
#reboot_delay = 0
# Time (in seconds) to sleep before power on and after
# powering off. Which may be needed with some PDUs as they may
# not honor toggling a specific power port in rapid succession
# without a delay. This option may be useful if the attached
# physical machine has a substantial power supply to hold it
# over in the event of a brownout. (integer value)
# Minimum value: 0
#power_action_delay = 0
# Response timeout in seconds used for UDP transport. Timeout
# should be a multiple of 0.5 seconds and is applicable to
# each retry. (floating point value)
# Minimum value: 0.0
#udp_transport_timeout = 1.0
# Maximum number of UDP request retries, 0 means no retries.
# (integer value)
# Minimum value: 0
#udp_transport_retries = 5
[ssl]
#
# From oslo.service.sslutils
#
# CA certificate file to use to verify connecting clients.
# (string value)
# Deprecated group/name - [DEFAULT]/ssl_ca_file
#ca_file = <None>
# Certificate file to use when starting the server securely.
# (string value)
# Deprecated group/name - [DEFAULT]/ssl_cert_file
#cert_file = <None>
# Private key file to use when starting the server securely.
# (string value)
# Deprecated group/name - [DEFAULT]/ssl_key_file
#key_file = <None>
# SSL version to use (valid only if SSL enabled). Valid values
# are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may
# be available on some distributions. (string value)
#version = <None>
# Sets the list of available ciphers. value should be a string
# in the OpenSSL cipher list format. (string value)
#ciphers = <None>
[swift]
#
# From ironic
#
# Authentication URL (string value)
#auth_url = <None>
# Authentication type to load (string value)
# Deprecated group/name - [swift]/auth_plugin
#auth_type = <None>
# PEM encoded Certificate Authority to use when verifying
# HTTPs connections. (string value)
#cafile = <None>
# PEM encoded client certificate cert file (string value)
#certfile = <None>
# Collect per-API call timing information. (boolean value)
#collect_timing = false
# The maximum number of retries that should be attempted for
# connection errors. (integer value)
#connect_retries = <None>
# Delay (in seconds) between two retries for connection
# errors. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#connect_retry_delay = <None>
# Optional domain ID to use with v3 and v2 parameters. It will
# be used for both the user and project domain in v3 and
# ignored in v2 authentication. (string value)
#default_domain_id = <None>
# Optional domain name to use with v3 API and v2 parameters.
# It will be used for both the user and project domain in v3
# and ignored in v2 authentication. (string value)
#default_domain_name = <None>
# Domain ID to scope to (string value)
#domain_id = <None>
# Domain name to scope to (string value)
#domain_name = <None>
# Always use this endpoint URL for requests for this client.
# NOTE: The unversioned endpoint should be specified here; to
# request a particular API version, use the `version`, `min-
# version`, and/or `max-version` options. (string value)
#endpoint_override = <None>
# Verify HTTPS connections. (boolean value)
#insecure = false
# PEM encoded client certificate key file (string value)
#keyfile = <None>
# The maximum major version of a given API, intended to be
# used as the upper bound of a range with min_version.
# Mutually exclusive with version. (string value)
#max_version = <None>
# The minimum major version of a given API, intended to be
# used as the lower bound of a range with max_version.
# Mutually exclusive with version. If min_version is given
# with no max_version it is as if max version is "latest".
# (string value)
#min_version = <None>
# User's password (string value)
#password = <None>
# Domain ID containing project (string value)
#project_domain_id = <None>
# Domain name containing project (string value)
#project_domain_name = <None>
# Project ID to scope to (string value)
# Deprecated group/name - [swift]/tenant_id
#project_id = <None>
# Project name to scope to (string value)
# Deprecated group/name - [swift]/tenant_name
#project_name = <None>
# The default region_name for endpoint URL discovery. (string
# value)
#region_name = <None>
# The default service_name for endpoint URL discovery. (string
# value)
#service_name = <None>
# The default service_type for endpoint URL discovery. (string
# value)
#service_type = object-store
# Log requests to multiple loggers. (boolean value)
#split_loggers = false
# The maximum number of retries that should be attempted for
# retriable HTTP status codes. (integer value)
#status_code_retries = <None>
# Delay (in seconds) between two retries for retriable status
# codes. If not set, exponential retry starting with 0.5
# seconds up to a maximum of 60 seconds is used. (floating
# point value)
#status_code_retry_delay = <None>
# Maximum number of times to retry a Swift request, before
# failing. (integer value)
#swift_max_retries = 2
# Scope for system operations (string value)
#system_scope = <None>
# Tenant ID (string value)
#tenant_id = <None>
# Tenant Name (string value)
#tenant_name = <None>
# Timeout value for http requests (integer value)
#timeout = <None>
# ID of the trust to use as a trustee use (string value)
#trust_id = <None>
# User's domain id (string value)
#user_domain_id = <None>
# User's domain name (string value)
#user_domain_name = <None>
# User id (string value)
#user_id = <None>
# Username (string value)
# Deprecated group/name - [swift]/user_name
#username = <None>
# List of interfaces, in order of preference, for endpoint
# URL. (list value)
#valid_interfaces = internal,public
# Minimum Major API version within a given Major API version
# for endpoint URL discovery. Mutually exclusive with
# min_version and max_version (string value)
#version = <None>
[xclarity]
#
# From ironic
#
# IP address of the XClarity Controller. Configuration here is
# deprecated and will be removed in the Stein release. Please
# update the driver_info field to use "xclarity_manager_ip"
# instead (string value)
#manager_ip = <None>
# Username for the XClarity Controller. Configuration here is
# deprecated and will be removed in the Stein release. Please
# update the driver_info field to use "xclarity_username"
# instead (string value)
#username = <None>
# Password for XClarity Controller username. Configuration
# here is deprecated and will be removed in the Stein release.
# Please update the driver_info field to use
# "xclarity_password" instead (string value)
#password = <None>
# Port to be used for XClarity Controller connection. (port
# value)
# Minimum value: 0
# Maximum value: 65535
#port = 443