Octavia

Octavia provides load balancing as a service. This guide covers configuration of Octavia for the Amphora driver. See the Octavia documentation for full details. The installation guide is a useful reference.

Enabling Octavia

Enable the octavia service in globals.yml:

enable_octavia: "yes"

Certificates

Octavia requires various TLS certificates for operation. Since the Victoria release, Kolla Ansible supports generating these certificates automatically.

Option 1: Automatically generating Certificates

Kolla Ansible provides default values for the certificate issuer and owner fields. You can customize this via globals.yml, for example:

octavia_certs_country: US
octavia_certs_state: Oregon
octavia_certs_organization: OpenStack
octavia_certs_organizational_unit: Octavia

Generate octavia certificates:

kolla-ansible octavia-certificates

The certificates and keys will be generated under /etc/kolla/config/octavia.

Option 2: Manually generating certificates

Follow the octavia documentation to generate certificates for Amphorae. These should be copied to the Kolla Ansible configuration as follows:

cp client_ca/certs/ca.cert.pem /etc/kolla/config/octavia/client_ca.cert.pem
cp server_ca/certs/ca.cert.pem /etc/kolla/config/octavia/server_ca.cert.pem
cp server_ca/private/ca.key.pem /etc/kolla/config/octavia/server_ca.key.pem
cp client_ca/private/client.cert-and-key.pem /etc/kolla/config/octavia/client.cert-and-key.pem

The following option should be set in passwords.yml, matching the password used to encrypt the CA key:

octavia_ca_password: <CA key password>

Networking

Octavia worker and health manager nodes must have access to the Octavia management network for communication with Amphorae.

If using a VLAN for the Octavia management network, enable Neutron provider networks:

enable_neutron_provider_networks: yes

Configure the name of the network interface on the controllers used to access the Octavia management network. If using a VLAN provider network, ensure that the traffic is also bridged to Open vSwitch on the controllers.

octavia_network_interface: <network interface on controllers>

This interface should have an IP address on the Octavia management subnet.

Registering OpenStack resources

Since the Victoria release, there are two ways to configure Octavia.

  1. Kolla Ansible automatically registers resources for Octavia during deployment

  2. Operator registers resources for Octavia after it is deployed

The first option is simpler, and is recommended for new users. The second option provides more flexibility, at the cost of complexity for the operator.

Option 2: Manual resource registration

In this case, Kolla Ansible will not register resources for Octavia. Set octavia_auto_configure to no in globals.yml:

octavia_auto_configure: no

All resources should be registered in the service project. This can be done as follows:

. /etc/kolla/octavia-openrc.sh

Note

Ensure that you have executed kolla-ansible post-deploy and set enable_octavia to yes in global.yml

Note

In Train and earlier releases, resources should be registered in the admin project. This is configured via octavia_service_auth_project, and may be set to service to avoid a breaking change when upgrading to Ussuri. Changing the project on an existing system requires at a minimum registering a new security group in the new project. Ideally the flavor and network should be recreated in the new project, although this will impact existing Amphorae.

Amphora flavor

Register the flavor in Nova:

openstack flavor create --vcpus 1 --ram 1024 --disk 2 "amphora" --private

Make a note of the ID of the flavor, or specify one via --id.

Keypair

Register the keypair in Nova:

openstack keypair create --public-key <path to octavia public key> octavia_ssh_key

Network and subnet

Register the management network and subnet in Neutron. This must be a network that is accessible from the controllers. Typically a VLAN provider network is used.

OCTAVIA_MGMT_SUBNET=192.168.43.0/24
OCTAVIA_MGMT_SUBNET_START=192.168.43.10
OCTAVIA_MGMT_SUBNET_END=192.168.43.254

openstack network create lb-mgmt-net --provider-network-type vlan --provider-segment 107  --provider-physical-network physnet1
openstack subnet create --subnet-range $OCTAVIA_MGMT_SUBNET --allocation-pool \
  start=$OCTAVIA_MGMT_SUBNET_START,end=$OCTAVIA_MGMT_SUBNET_END \
  --network lb-mgmt-net lb-mgmt-subnet

Make a note of the ID of the network.

Security group

Register the security group in Neutron.

openstack security group create lb-mgmt-sec-grp
openstack security group rule create --protocol icmp lb-mgmt-sec-grp
openstack security group rule create --protocol tcp --dst-port 22 lb-mgmt-sec-grp
openstack security group rule create --protocol tcp --dst-port 9443 lb-mgmt-sec-grp

Make a note of the ID of the security group.

Kolla Ansible configuration

The following options should be added to globals.yml.

Set the IDs of the resources registered previously:

octavia_amp_boot_network_list: <ID of lb-mgmt-net>
octavia_amp_secgroup_list: <ID of lb-mgmt-sec-grp>
octavia_amp_flavor_id: <ID of amphora flavor>

Now deploy Octavia:

kolla-ansible -i <inventory> deploy --tags common,horizon,octavia

Amphora image

It is necessary to build an Amphora image. On CentOS / RHEL 8:

sudo dnf -y install epel-release
sudo dnf install -y debootstrap qemu-img git e2fsprogs policycoreutils-python-utils

On Ubuntu:

sudo apt -y install debootstrap qemu-utils git kpartx

Acquire the Octavia source code:

git clone https://opendev.org/openstack/octavia -b <branch>

Install diskimage-builder, ideally in a virtual environment:

python3 -m venv dib-venv
source dib-venv/bin/activate
pip install diskimage-builder

Create the Amphora image:

cd octavia/diskimage-create
./diskimage-create.sh

Source octavia user openrc:

. /etc/kolla/octavia-openrc.sh

Note

Ensure that you have executed kolla-ansible post-deploy

Register the image in Glance:

openstack image create amphora-x64-haproxy.qcow2 --container-format bare --disk-format qcow2 --private --tag amphora --file amphora-x64-haproxy.qcow2 --property hw_architecture='x86_64' --property hw_rng_model=virtio

Note

the tag should match the octavia_amp_image_tag in /etc/kolla/globals.yml, by default, the tag is “amphora”, octavia uses the tag to determine which image to use.

Debug

SSH to an amphora

login into one of octavia-worker nodes, and ssh into amphora.

ssh -i /etc/kolla/octavia-worker/octavia_ssh_key ubuntu@<amphora_ip>

Note

amphora private key is located at /etc/kolla/octavia-worker/octavia_ssh_key on all octavia-worker nodes.

Upgrade

If you upgrade from the Ussuri release, you must disable octavia_auto_configure in globals.yml and keep your other octavia config as before.