[DEFAULT] # # From magnum.conf # # Directory where the magnum python module is installed. (string value) #pybasedir = /home/zuul/src/git.openstack.org/openstack/magnum/magnum # Directory where magnum binaries are installed. (string value) #bindir = $pybasedir/bin # Top-level directory for maintaining magnum's state. (string value) #state_path = $pybasedir # Enable periodic tasks. (boolean value) #periodic_enable = true # Max interval size between periodic tasks execution in seconds. (integer # value) #periodic_interval_max = 60 # Name of this node. This can be an opaque identifier. It is not necessarily a # hostname, FQDN, or IP address. However, the node name must be valid within an # AMQP key, and if using ZeroMQ, a valid hostname, FQDN, or IP address. (string # value) #host = # Path to the rootwrap configuration file to use for running commands as root. # (string value) #rootwrap_config = /etc/magnum/rootwrap.conf # Explicitly specify the temporary working directory. (string value) #tempdir = # Symbols to use for passwords (list value) #password_symbols = 23456789,ABCDEFGHJKLMNPQRSTUVWXYZ,abcdefghijkmnopqrstuvwxyz # Max interval size between periodic tasks execution in seconds. (integer # value) #service_down_time = 180 # Maximum raw byte size of any manifest. (integer value) #max_manifest_size = 524288 # # From oslo.log # # If set to true, the logging level will be set to DEBUG instead of the default # INFO level. (boolean value) # Note: This option can be changed without restarting. #debug = false # The name of a logging configuration file. This file is appended to any # existing logging configuration files. For details about logging configuration # files, see the Python logging module documentation. Note that when logging # configuration files are used then all logging configuration is set in the # configuration file and other logging configuration options are ignored (for # example, logging_context_format_string). (string value) # Note: This option can be changed without restarting. # Deprecated group/name - [DEFAULT]/log_config #log_config_append = # Defines the format string for %%(asctime)s in log records. Default: # %(default)s . This option is ignored if log_config_append is set. (string # value) #log_date_format = %Y-%m-%d %H:%M:%S # (Optional) Name of log file to send logging output to. If no default is set, # logging will go to stderr as defined by use_stderr. This option is ignored if # log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logfile #log_file = # (Optional) The base directory used for relative log_file paths. This option # is ignored if log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logdir #log_dir = # Uses logging handler designed to watch file system. When log file is moved or # removed this handler will open a new log file with specified path # instantaneously. It makes sense only if log_file option is specified and # Linux platform is used. This option is ignored if log_config_append is set. # (boolean value) #watch_log_file = false # Use syslog for logging. Existing syslog format is DEPRECATED and will be # changed later to honor RFC5424. This option is ignored if log_config_append # is set. (boolean value) #use_syslog = false # Enable journald for logging. If running in a systemd environment you may wish # to enable journal support. Doing so will use the journal native protocol # which includes structured metadata in addition to log messages.This option is # ignored if log_config_append is set. (boolean value) #use_journal = false # Syslog facility to receive log lines. This option is ignored if # log_config_append is set. (string value) #syslog_log_facility = LOG_USER # Log output to standard error. This option is ignored if log_config_append is # set. (boolean value) #use_stderr = false # Format string to use for log messages with context. (string value) #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s # Format string to use for log messages when context is undefined. (string # value) #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s # Additional data to append to log message when logging level for the message # is DEBUG. (string value) #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d # Prefix each line of exception output with this format. (string value) #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s # Defines the format string for %(user_identity)s that is used in # logging_context_format_string. (string value) #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s # List of package logging levels in logger=LEVEL pairs. This option is ignored # if log_config_append is set. (list value) #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO # Enables or disables publication of error events. (boolean value) #publish_errors = false # The format for an instance that is passed with the log message. (string # value) #instance_format = "[instance: %(uuid)s] " # The format for an instance UUID that is passed with the log message. (string # value) #instance_uuid_format = "[instance: %(uuid)s] " # Interval, number of seconds, of log rate limiting. (integer value) #rate_limit_interval = 0 # Maximum number of logged messages per rate_limit_interval. (integer value) #rate_limit_burst = 0 # Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG # or empty string. Logs with level greater or equal to rate_limit_except_level # are not filtered. An empty string means that all levels are filtered. (string # value) #rate_limit_except_level = CRITICAL # Enables or disables fatal status of deprecations. (boolean value) #fatal_deprecations = false # # From oslo.messaging # # Size of RPC connection pool. (integer value) #rpc_conn_pool_size = 30 # The pool size limit for connections expiration policy (integer value) #conn_pool_min_size = 2 # The time-to-live in sec of idle connections in the pool (integer value) #conn_pool_ttl = 1200 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. # The "host" option should point or resolve to this address. (string value) #rpc_zmq_bind_address = * # MatchMaker driver. (string value) # Allowed values: redis, sentinel, dummy #rpc_zmq_matchmaker = redis # Number of ZeroMQ contexts, defaults to 1. (integer value) #rpc_zmq_contexts = 1 # Maximum number of ingress messages to locally buffer per topic. Default is # unlimited. (integer value) #rpc_zmq_topic_backlog = # Directory for holding IPC sockets. (string value) #rpc_zmq_ipc_dir = /var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match # "host" option, if running Nova. (string value) #rpc_zmq_host = localhost # Number of seconds to wait before all pending messages will be sent after # closing a socket. The default value of -1 specifies an infinite linger # period. The value of 0 specifies no linger period. Pending messages shall be # discarded immediately when the socket is closed. Positive values specify an # upper bound for the linger period. (integer value) # Deprecated group/name - [DEFAULT]/rpc_cast_timeout #zmq_linger = -1 # The default number of seconds that poll should wait. Poll raises timeout # exception when timeout expired. (integer value) #rpc_poll_timeout = 1 # Expiration timeout in seconds of a name service record about existing target # ( < 0 means no timeout). (integer value) #zmq_target_expire = 300 # Update period in seconds of a name service record about existing target. # (integer value) #zmq_target_update = 180 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean # value) #use_pub_sub = false # Use ROUTER remote proxy. (boolean value) #use_router_proxy = false # This option makes direct connections dynamic or static. It makes sense only # with use_router_proxy=False which means to use direct connections for direct # message types (ignored otherwise). (boolean value) #use_dynamic_connections = false # How many additional connections to a host will be made for failover reasons. # This option is actual only in dynamic connections mode. (integer value) #zmq_failover_connections = 2 # Minimal port number for random ports range. (port value) # Minimum value: 0 # Maximum value: 65535 #rpc_zmq_min_port = 49153 # Maximal port number for random ports range. (integer value) # Minimum value: 1 # Maximum value: 65536 #rpc_zmq_max_port = 65536 # Number of retries to find free port number before fail with ZMQBindError. # (integer value) #rpc_zmq_bind_port_retries = 100 # Default serialization mechanism for serializing/deserializing # outgoing/incoming messages (string value) # Allowed values: json, msgpack #rpc_zmq_serialization = json # This option configures round-robin mode in zmq socket. True means not keeping # a queue when server side disconnects. False means to keep queue and messages # even if server is disconnected, when the server appears we send all # accumulated messages to it. (boolean value) #zmq_immediate = true # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any # other negative value) means to skip any overrides and leave it to OS default; # 0 and 1 (or any other positive value) mean to disable and enable the option # respectively. (integer value) #zmq_tcp_keepalive = -1 # The duration between two keepalive transmissions in idle condition. The unit # is platform dependent, for example, seconds in Linux, milliseconds in Windows # etc. The default value of -1 (or any other negative value and 0) means to # skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_idle = -1 # The number of retransmissions to be carried out before declaring that remote # end is not available. The default value of -1 (or any other negative value # and 0) means to skip any overrides and leave it to OS default. (integer # value) #zmq_tcp_keepalive_cnt = -1 # The duration between two successive keepalive retransmissions, if # acknowledgement to the previous keepalive transmission is not received. The # unit is platform dependent, for example, seconds in Linux, milliseconds in # Windows etc. The default value of -1 (or any other negative value and 0) # means to skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_intvl = -1 # Maximum number of (green) threads to work concurrently. (integer value) #rpc_thread_pool_size = 100 # Expiration timeout in seconds of a sent/received message after which it is # not tracked anymore by a client/server. (integer value) #rpc_message_ttl = 300 # Wait for message acknowledgements from receivers. This mechanism works only # via proxy without PUB/SUB. (boolean value) #rpc_use_acks = false # Number of seconds to wait for an ack from a cast/call. After each retry # attempt this timeout is multiplied by some specified multiplier. (integer # value) #rpc_ack_timeout_base = 15 # Number to multiply base ack timeout by after each retry attempt. (integer # value) #rpc_ack_timeout_multiplier = 2 # Default number of message sending attempts in case of any problems occurred: # positive value N means at most N retries, 0 means no retries, None or -1 (or # any other negative values) mean to retry forever. This option is used only if # acknowledgments are enabled. (integer value) #rpc_retry_attempts = 3 # List of publisher hosts SubConsumer can subscribe on. This option has higher # priority then the default publishers list taken from the matchmaker. (list # value) #subscribe_on = # Size of executor thread pool when executor is threading or eventlet. (integer # value) # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size #executor_thread_pool_size = 64 # Seconds to wait for a response from a call. (integer value) #rpc_response_timeout = 60 # A URL representing the messaging driver to use and its full configuration. # (string value) #transport_url = # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers # include amqp and zmq. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rpc_backend = rabbit # The default exchange under which topics are scoped. May be overridden by an # exchange name specified in the transport_url option. (string value) #control_exchange = openstack # # From oslo.service.periodic_task # # Some periodic tasks can be run in a separate process. Should we run them # here? (boolean value) #run_external_periodic_tasks = true # # From oslo.service.service # # Enable eventlet backdoor. Acceptable values are 0, , and # :, where 0 results in listening on a random tcp port number; # results in listening on the specified port number (and not enabling # backdoor if that port is in use); and : results in listening on # the smallest unused port number within the specified range of port numbers. # The chosen port is displayed in the service's log file. (string value) #backdoor_port = # Enable eventlet backdoor, using the provided path as a unix socket that can # receive connections. This option is mutually exclusive with 'backdoor_port' # in that only one should be provided. If both are provided then the existence # of this option overrides the usage of that option. (string value) #backdoor_socket = # Enables or disables logging values of all registered options when starting a # service (at DEBUG level). (boolean value) #log_options = true # Specify a timeout after which a gracefully shutdown server will exit. Zero # value means endless wait. (integer value) #graceful_shutdown_timeout = 60 [api] # # From magnum.conf # # The port for the Magnum API server. (port value) # Minimum value: 0 # Maximum value: 65535 #port = 9511 # The listen IP for the Magnum API server. (IP address value) #host = 127.0.0.1 # The maximum number of items returned in a single response from a collection # resource. (integer value) #max_limit = 1000 # Configuration file for WSGI definition of API. (string value) #api_paste_config = api-paste.ini # This option allows setting path to the SSL certificate of API server. # (string value) #ssl_cert_file = # This option specifies the path to the file where SSL private key of API # server is stored when SSL is in effect. (string value) #ssl_key_file = # Enable SSL Magnum API service (boolean value) #enabled_ssl = false # The maximum number of magnum-api processes to fork and run. Default to number # of CPUs on the host. (integer value) #workers = [barbican_client] # # From magnum.conf # # Region in Identity service catalog to use for communication with the # OpenStack service. (string value) #region_name = # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = publicURL [certificates] # # From magnum.conf # # Certificate Manager plugin. Defaults to barbican. (string value) #cert_manager_type = barbican # Absolute path of the certificate storage directory. Defaults to # /var/lib/magnum/certificates/. (string value) #storage_path = /var/lib/magnum/certificates/ [cinder] # # From magnum.conf # # The default docker volume_type to use for volumes used for docker storage. To # use the cinder volumes for docker storage, you need to select a default # value. (string value) #default_docker_volume_type = [cinder_client] # # From magnum.conf # # Region in Identity service catalog to use for communication with the # OpenStack service. (string value) #region_name = [cluster] # # From magnum.conf # # Url for etcd public discovery endpoint. (string value) #etcd_discovery_service_endpoint_format = https://discovery.etcd.io/new?size=%(size)d # DEPRECATED: Enabled cluster definition entry points. (list value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: This configuration option is no longer used. Installing a new driver # enables it for use automatically. #enabled_definitions = magnum_vm_atomic_k8s,magnum_bm_fedora_k8s,magnum_vm_coreos_k8s,magnum_vm_atomic_swarm,magnum_vm_ubuntu_mesos [cluster_heat] # # From magnum.conf # # Number of attempts to query the Heat stack for finding out the status of the # created stack and getting template outputs. This value is ignored during # cluster creation if timeout is set as the poll will continue until cluster # creation either ends or times out. (integer value) #max_attempts = 2000 # Sleep time interval between two attempts of querying the Heat stack. This # interval is in seconds. (integer value) #wait_interval = 1 # The length of time to let cluster creation continue. This interval is in # minutes. The default is 60 minutes. (integer value) # Deprecated group/name - [bay_heat]/bay_create_timeout #create_timeout = 60 [cluster_template] # # From magnum.conf # # Allowed network drivers for kubernetes cluster-templates. Use 'all' keyword # to allow all drivers supported for kubernetes cluster-templates. Supported # network drivers include flannel. (list value) #kubernetes_allowed_network_drivers = all # Default network driver for kubernetes cluster-templates. (string value) #kubernetes_default_network_driver = flannel # Allowed network drivers for docker swarm cluster-templates. Use 'all' keyword # to allow all drivers supported for swarm cluster-templates. Supported network # drivers include docker and flannel. (list value) #swarm_allowed_network_drivers = all # Default network driver for docker swarm cluster-templates. (string value) #swarm_default_network_driver = docker # Allowed network drivers for mesos cluster-templates. Use 'all' keyword to # allow all drivers supported for mesos cluster-templates. Supported network # drivers include docker. (list value) #mesos_allowed_network_drivers = all # Default network driver for mesos cluster-templates. (string value) #mesos_default_network_driver = docker [conductor] # # From magnum.conf # # The queue to add conductor tasks to. (string value) #topic = magnum-conductor # RPC timeout for the conductor liveness check that is used for cluster # locking. (integer value) #conductor_life_check_timeout = 4 # Number of magnum-conductor processes to fork and run. Default to number of # CPUs on the host. (integer value) #workers = [cors] # # From oslo.middleware.cors # # Indicate whether this resource may be shared with the domain received in the # requests "origin" header. Format: "://[:]", no trailing # slash. Example: https://horizon.example.com (list value) #allowed_origin = # Indicate that the actual request can include user credentials (boolean value) #allow_credentials = true # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple # Headers. (list value) #expose_headers = # Maximum cache age of CORS preflight requests. (integer value) #max_age = 3600 # Indicate which methods can be used during the actual request. (list value) #allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH # Indicate which header field names may be used during the actual request. # (list value) #allow_headers = [database] # # From magnum.conf # # MySQL engine to use. (string value) #mysql_engine = InnoDB # # From oslo.db # # If True, SQLite uses synchronous mode. (boolean value) #sqlite_synchronous = true # The back end to use for the database. (string value) # Deprecated group/name - [DEFAULT]/db_backend #backend = sqlalchemy # The SQLAlchemy connection string to use to connect to the database. (string # value) # Deprecated group/name - [DEFAULT]/sql_connection # Deprecated group/name - [DATABASE]/sql_connection # Deprecated group/name - [sql]/connection #connection = # The SQLAlchemy connection string to use to connect to the slave database. # (string value) #slave_connection = # The SQL mode to be used for MySQL sessions. This option, including the # default, overrides any server-set SQL mode. To use whatever SQL mode is set # by the server configuration, set this to no value. Example: mysql_sql_mode= # (string value) #mysql_sql_mode = TRADITIONAL # If True, transparently enables support for handling MySQL Cluster (NDB). # (boolean value) #mysql_enable_ndb = false # Timeout before idle SQL connections are reaped. (integer value) # Deprecated group/name - [DEFAULT]/sql_idle_timeout # Deprecated group/name - [DATABASE]/sql_idle_timeout # Deprecated group/name - [sql]/idle_timeout #idle_timeout = 3600 # Minimum number of SQL connections to keep open in a pool. (integer value) # Deprecated group/name - [DEFAULT]/sql_min_pool_size # Deprecated group/name - [DATABASE]/sql_min_pool_size #min_pool_size = 1 # Maximum number of SQL connections to keep open in a pool. Setting a value of # 0 indicates no limit. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_pool_size # Deprecated group/name - [DATABASE]/sql_max_pool_size #max_pool_size = 5 # Maximum number of database connection retries during startup. Set to -1 to # specify an infinite retry count. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_retries # Deprecated group/name - [DATABASE]/sql_max_retries #max_retries = 10 # Interval between retries of opening a SQL connection. (integer value) # Deprecated group/name - [DEFAULT]/sql_retry_interval # Deprecated group/name - [DATABASE]/reconnect_interval #retry_interval = 10 # If set, use this value for max_overflow with SQLAlchemy. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_overflow # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow #max_overflow = 50 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer # value) # Minimum value: 0 # Maximum value: 100 # Deprecated group/name - [DEFAULT]/sql_connection_debug #connection_debug = 0 # Add Python stack traces to SQL as comment strings. (boolean value) # Deprecated group/name - [DEFAULT]/sql_connection_trace #connection_trace = false # If set, use this value for pool_timeout with SQLAlchemy. (integer value) # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout #pool_timeout = # Enable the experimental use of database reconnect on connection lost. # (boolean value) #use_db_reconnect = false # Seconds between retries of a database transaction. (integer value) #db_retry_interval = 1 # If True, increases the interval between retries of a database operation up to # db_max_retry_interval. (boolean value) #db_inc_retry_interval = true # If db_inc_retry_interval is set, the maximum seconds between retries of a # database operation. (integer value) #db_max_retry_interval = 10 # Maximum retries in case of connection error or deadlock error before error is # raised. Set to -1 to specify an infinite retry count. (integer value) #db_max_retries = 20 [docker] # # From magnum.conf # # Docker remote api version. Override it according to specific docker api # version in your environment. (string value) #docker_remote_api_version = 1.21 # Default timeout in seconds for docker client operations. (integer value) #default_timeout = 60 # If set, ignore any SSL validation issues (boolean value) #api_insecure = false # Location of CA certificates file for securing docker api requests # (tlscacert). (string value) #ca_file = # Location of TLS certificate file for securing docker api requests (tlscert). # (string value) #cert_file = # Location of TLS private key file for securing docker api requests (tlskey). # (string value) #key_file = [docker_registry] # # From magnum.conf # # Region name of Swift (string value) #swift_region = # Name of the container in Swift which docker registry stores images in (string # value) #swift_registry_container = docker_registry [drivers] # # From magnum.conf # # Indicates whether the cluster nodes validate the Certificate Authority when # making requests to the OpenStack APIs (Keystone, Magnum, Heat). If you have # self-signed certificates for the OpenStack APIs or you have your own # Certificate Authority and you have not installed the Certificate Authority to # all nodes, you may need to disable CA validation by setting this flag to # False. (boolean value) #verify_ca = true # Path to the OpenStack CA-bundle file to pass and install in all cluster # nodes. (string value) #openstack_ca_file = [glance_client] # # From magnum.conf # # Region in Identity service catalog to use for communication with the # OpenStack service. (string value) #region_name = # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = publicURL # Version of Glance API to use in glanceclient. (string value) #api_version = 2 # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = false [heat_client] # # From magnum.conf # # Region in Identity service catalog to use for communication with the # OpenStack service. (string value) #region_name = # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = publicURL # Version of Heat API to use in heatclient. (string value) #api_version = 1 # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = false [keystone_auth] # # From magnum.conf # # Authentication type to load (string value) # Deprecated group/name - [keystone_auth]/auth_plugin #auth_type = # Config Section from which to load plugin specific options (string value) #auth_section = # Authentication URL (string value) #auth_url = # Domain ID to scope to (string value) #domain_id = # Domain name to scope to (string value) #domain_name = # Project ID to scope to (string value) # Deprecated group/name - [keystone_auth]/tenant_id #project_id = # Project name to scope to (string value) # Deprecated group/name - [keystone_auth]/tenant_name #project_name = # Domain ID containing project (string value) #project_domain_id = # Domain name containing project (string value) #project_domain_name = # Trust ID (string value) #trust_id = # Optional domain ID to use with v3 and v2 parameters. It will be used for both # the user and project domain in v3 and ignored in v2 authentication. (string # value) #default_domain_id = # Optional domain name to use with v3 API and v2 parameters. It will be used # for both the user and project domain in v3 and ignored in v2 authentication. # (string value) #default_domain_name = # User id (string value) #user_id = # Username (string value) # Deprecated group/name - [keystone_auth]/user_name #username = # User's domain id (string value) #user_domain_id = # User's domain name (string value) #user_domain_name = # User's password (string value) #password = [keystone_authtoken] # # From keystonemiddleware.auth_token # # Complete "public" Identity API endpoint. This endpoint should not be an # "admin" endpoint, as it should be accessible by all end users. # Unauthenticated clients are redirected to this endpoint to authenticate. # Although this endpoint should ideally be unversioned, client support in the # wild varies. If you're using a versioned v2 endpoint here, then this should # *not* be the same endpoint the service user utilizes for validating tokens, # because normal end users may not be able to reach that endpoint. (string # value) #auth_uri = # API version of the admin Identity API endpoint. (string value) #auth_version = # Do not handle authorization requests within the middleware, but delegate the # authorization decision to downstream WSGI components. (boolean value) #delay_auth_decision = false # Request timeout value for communicating with Identity API server. (integer # value) #http_connect_timeout = # How many times are we trying to reconnect when communicating with Identity # API Server. (integer value) #http_request_max_retries = 3 # Request environment key where the Swift cache object is stored. When # auth_token middleware is deployed with a Swift cache, use this option to have # the middleware share a caching backend with swift. Otherwise, use the # ``memcached_servers`` option instead. (string value) #cache = # Required if identity server requires client certificate (string value) #certfile = # Required if identity server requires client certificate (string value) #keyfile = # A PEM encoded Certificate Authority to use when verifying HTTPs connections. # Defaults to system CAs. (string value) #cafile = # Verify HTTPS connections. (boolean value) #insecure = false # The region in which the identity server can be found. (string value) #region_name = # DEPRECATED: Directory used to cache files related to PKI tokens. This option # has been deprecated in the Ocata release and will be removed in the P # release. (string value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #signing_dir = # Optionally specify a list of memcached server(s) to use for caching. If left # undefined, tokens will instead be cached in-process. (list value) # Deprecated group/name - [keystone_authtoken]/memcache_servers #memcached_servers = # In order to prevent excessive effort spent validating tokens, the middleware # caches previously-seen tokens for a configurable duration (in seconds). Set # to -1 to disable caching completely. (integer value) #token_cache_time = 300 # DEPRECATED: Determines the frequency at which the list of revoked tokens is # retrieved from the Identity service (in seconds). A high number of revocation # events combined with a low cache duration may significantly reduce # performance. Only valid for PKI tokens. This option has been deprecated in # the Ocata release and will be removed in the P release. (integer value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #revocation_cache_time = 10 # (Optional) If defined, indicate whether token data should be authenticated or # authenticated and encrypted. If MAC, token data is authenticated (with HMAC) # in the cache. If ENCRYPT, token data is encrypted and authenticated in the # cache. If the value is not one of these options or empty, auth_token will # raise an exception on initialization. (string value) # Allowed values: None, MAC, ENCRYPT #memcache_security_strategy = None # (Optional, mandatory if memcache_security_strategy is defined) This string is # used for key derivation. (string value) #memcache_secret_key = # (Optional) Number of seconds memcached server is considered dead before it is # tried again. (integer value) #memcache_pool_dead_retry = 300 # (Optional) Maximum total number of open connections to every memcached # server. (integer value) #memcache_pool_maxsize = 10 # (Optional) Socket timeout in seconds for communicating with a memcached # server. (integer value) #memcache_pool_socket_timeout = 3 # (Optional) Number of seconds a connection to memcached is held unused in the # pool before it is closed. (integer value) #memcache_pool_unused_timeout = 60 # (Optional) Number of seconds that an operation will wait to get a memcached # client connection from the pool. (integer value) #memcache_pool_conn_get_timeout = 10 # (Optional) Use the advanced (eventlet safe) memcached client pool. The # advanced pool will only work under python 2.x. (boolean value) #memcache_use_advanced_pool = false # (Optional) Indicate whether to set the X-Service-Catalog header. If False, # middleware will not ask for service catalog on token validation and will not # set the X-Service-Catalog header. (boolean value) #include_service_catalog = true # Used to control the use and type of token binding. Can be set to: "disabled" # to not check token binding. "permissive" (default) to validate binding # information if the bind type is of a form known to the server and ignore it # if not. "strict" like "permissive" but if the bind type is unknown the token # will be rejected. "required" any form of token binding is needed to be # allowed. Finally the name of a binding method that must be present in tokens. # (string value) #enforce_token_bind = permissive # DEPRECATED: If true, the revocation list will be checked for cached tokens. # This requires that PKI tokens are configured on the identity server. (boolean # value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #check_revocations_for_cached = false # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a # single algorithm or multiple. The algorithms are those supported by Python # standard hashlib.new(). The hashes will be tried in the order given, so put # the preferred one first for performance. The result of the first hash will be # stored in the cache. This will typically be set to multiple values only while # migrating from a less secure algorithm to a more secure one. Once all the old # tokens are expired this option should be set to a single value for better # performance. (list value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #hash_algorithms = md5 # A choice of roles that must be present in a service token. Service tokens are # allowed to request that an expired token can be used and so this check should # tightly control that only actual services should be sending this token. Roles # here are applied as an ANY check so any role in this list must be present. # For backwards compatibility reasons this currently only affects the # allow_expired check. (list value) #service_token_roles = service # For backwards compatibility reasons we must let valid service tokens pass # that don't pass the service_token_roles check as valid. Setting this true # will become the default in a future release and should be enabled if # possible. (boolean value) #service_token_roles_required = false # Authentication type to load (string value) # Deprecated group/name - [keystone_authtoken]/auth_plugin #auth_type = # Config Section from which to load plugin specific options (string value) #auth_section = [magnum_client] # # From magnum.conf # # Region in Identity service catalog to use for communication with the # OpenStack service. (string value) #region_name = # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = publicURL [matchmaker_redis] # # From oslo.messaging # # DEPRECATED: Host to locate redis. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #host = 127.0.0.1 # DEPRECATED: Use this port to connect to redis host. (port value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #port = 6379 # DEPRECATED: Password for Redis server (optional). (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #password = # DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g., # [host:port, host1:port ... ] (list value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #sentinel_hosts = # Redis replica set name. (string value) #sentinel_group_name = oslo-messaging-zeromq # Time in ms to wait between connection attempts. (integer value) #wait_timeout = 2000 # Time in ms to wait before the transaction is killed. (integer value) #check_timeout = 20000 # Timeout in ms on blocking socket operations. (integer value) #socket_timeout = 10000 [neutron_client] # # From magnum.conf # # Region in Identity service catalog to use for communication with the # OpenStack service. (string value) #region_name = # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = publicURL # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = false [nova_client] # # From magnum.conf # # Region in Identity service catalog to use for communication with the # OpenStack service. (string value) #region_name = # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = publicURL # Version of Nova API to use in novaclient. (string value) #api_version = 2 # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = false [oslo_concurrency] # # From oslo.concurrency # # Enables or disables inter-process locks. (boolean value) #disable_process_locking = false # Directory to use for lock files. For security, the specified directory # should only be writable by the user running the processes that need locking. # Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, # a lock path must be set. (string value) #lock_path = [oslo_messaging_amqp] # # From oslo.messaging # # Name for the AMQP container. must be globally unique. Defaults to a generated # UUID (string value) #container_name = # Timeout for inactive connections (in seconds) (integer value) #idle_timeout = 0 # Debug: dump AMQP frames to stdout (boolean value) #trace = false # Attempt to connect via SSL. If no other ssl-related parameters are given, it # will use the system's CA-bundle to verify the server's certificate. (boolean # value) #ssl = false # CA certificate PEM file used to verify the server's certificate (string # value) #ssl_ca_file = # Self-identifying certificate PEM file for client authentication (string # value) #ssl_cert_file = # Private key PEM file used to sign ssl_cert_file certificate (optional) # (string value) #ssl_key_file = # Password for decrypting ssl_key_file (if encrypted) (string value) #ssl_key_password = # By default SSL checks that the name in the server's certificate matches the # hostname in the transport_url. In some configurations it may be preferable to # use the virtual hostname instead, for example if the server uses the Server # Name Indication TLS extension (rfc6066) to provide a certificate per virtual # host. Set ssl_verify_vhost to True if the server's SSL certificate uses the # virtual host name instead of the DNS name. (boolean value) #ssl_verify_vhost = false # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Not applicable - not a SSL server #allow_insecure_clients = false # Space separated list of acceptable SASL mechanisms (string value) #sasl_mechanisms = # Path to directory that contains the SASL configuration (string value) #sasl_config_dir = # Name of configuration file (without .conf suffix) (string value) #sasl_config_name = # SASL realm to use if no realm present in username (string value) #sasl_default_realm = # DEPRECATED: User name for message broker authentication (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Should use configuration option transport_url to provide the # username. #username = # DEPRECATED: Password for message broker authentication (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Should use configuration option transport_url to provide the # password. #password = # Seconds to pause before attempting to re-connect. (integer value) # Minimum value: 1 #connection_retry_interval = 1 # Increase the connection_retry_interval by this many seconds after each # unsuccessful failover attempt. (integer value) # Minimum value: 0 #connection_retry_backoff = 2 # Maximum limit for connection_retry_interval + connection_retry_backoff # (integer value) # Minimum value: 1 #connection_retry_interval_max = 30 # Time to pause between re-connecting an AMQP 1.0 link that failed due to a # recoverable error. (integer value) # Minimum value: 1 #link_retry_delay = 10 # The maximum number of attempts to re-send a reply message which failed due to # a recoverable error. (integer value) # Minimum value: -1 #default_reply_retry = 0 # The deadline for an rpc reply message delivery. (integer value) # Minimum value: 5 #default_reply_timeout = 30 # The deadline for an rpc cast or call message delivery. Only used when caller # does not provide a timeout expiry. (integer value) # Minimum value: 5 #default_send_timeout = 30 # The deadline for a sent notification message delivery. Only used when caller # does not provide a timeout expiry. (integer value) # Minimum value: 5 #default_notify_timeout = 30 # The duration to schedule a purge of idle sender links. Detach link after # expiry. (integer value) # Minimum value: 1 #default_sender_link_timeout = 600 # Indicates the addressing mode used by the driver. # Permitted values: # 'legacy' - use legacy non-routable addressing # 'routable' - use routable addresses # 'dynamic' - use legacy addresses if the message bus does not support routing # otherwise use routable addressing (string value) #addressing_mode = dynamic # Enable virtual host support for those message buses that do not natively # support virtual hosting (such as qpidd). When set to true the virtual host # name will be added to all message bus addresses, effectively creating a # private 'subnet' per virtual host. Set to False if the message bus supports # virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative # as the name of the virtual host. (boolean value) #pseudo_vhost = true # address prefix used when sending to a specific server (string value) #server_request_prefix = exclusive # address prefix used when broadcasting to all servers (string value) #broadcast_prefix = broadcast # address prefix when sending to any server in group (string value) #group_request_prefix = unicast # Address prefix for all generated RPC addresses (string value) #rpc_address_prefix = openstack.org/om/rpc # Address prefix for all generated Notification addresses (string value) #notify_address_prefix = openstack.org/om/notify # Appended to the address prefix when sending a fanout message. Used by the # message bus to identify fanout messages. (string value) #multicast_address = multicast # Appended to the address prefix when sending to a particular RPC/Notification # server. Used by the message bus to identify messages sent to a single # destination. (string value) #unicast_address = unicast # Appended to the address prefix when sending to a group of consumers. Used by # the message bus to identify messages that should be delivered in a round- # robin fashion across consumers. (string value) #anycast_address = anycast # Exchange name used in notification addresses. # Exchange name resolution precedence: # Target.exchange if set # else default_notification_exchange if set # else control_exchange if set # else 'notify' (string value) #default_notification_exchange = # Exchange name used in RPC addresses. # Exchange name resolution precedence: # Target.exchange if set # else default_rpc_exchange if set # else control_exchange if set # else 'rpc' (string value) #default_rpc_exchange = # Window size for incoming RPC Reply messages. (integer value) # Minimum value: 1 #reply_link_credit = 200 # Window size for incoming RPC Request messages (integer value) # Minimum value: 1 #rpc_server_credit = 100 # Window size for incoming Notification messages (integer value) # Minimum value: 1 #notify_server_credit = 100 # Send messages of this type pre-settled. # Pre-settled messages will not receive acknowledgement # from the peer. Note well: pre-settled messages may be # silently discarded if the delivery fails. # Permitted values: # 'rpc-call' - send RPC Calls pre-settled # 'rpc-reply'- send RPC Replies pre-settled # 'rpc-cast' - Send RPC Casts pre-settled # 'notify' - Send Notifications pre-settled # (multi valued) #pre_settled = rpc-cast #pre_settled = rpc-reply [oslo_messaging_kafka] # # From oslo.messaging # # DEPRECATED: Default Kafka broker Host (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #kafka_default_host = localhost # DEPRECATED: Default Kafka broker Port (port value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #kafka_default_port = 9092 # Max fetch bytes of Kafka consumer (integer value) #kafka_max_fetch_bytes = 1048576 # Default timeout(s) for Kafka consumers (floating point value) #kafka_consumer_timeout = 1.0 # Pool Size for Kafka Consumers (integer value) #pool_size = 10 # The pool size limit for connections expiration policy (integer value) #conn_pool_min_size = 2 # The time-to-live in sec of idle connections in the pool (integer value) #conn_pool_ttl = 1200 # Group id for Kafka consumer. Consumers in one group will coordinate message # consumption (string value) #consumer_group = oslo_messaging_consumer # Upper bound on the delay for KafkaProducer batching in seconds (floating # point value) #producer_batch_timeout = 0.0 # Size of batch for the producer async send (integer value) #producer_batch_size = 16384 [oslo_messaging_notifications] # # From oslo.messaging # # The Drivers(s) to handle sending notifications. Possible values are # messaging, messagingv2, routing, log, test, noop (multi valued) # Deprecated group/name - [DEFAULT]/notification_driver #driver = # A URL representing the messaging driver to use for notifications. If not set, # we fall back to the same configuration used for RPC. (string value) # Deprecated group/name - [DEFAULT]/notification_transport_url #transport_url = # AMQP topic used for OpenStack notifications. (list value) # Deprecated group/name - [rpc_notifier2]/topics # Deprecated group/name - [DEFAULT]/notification_topics #topics = notifications # The maximum number of attempts to re-send a notification message which failed # to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite # (integer value) #retry = -1 [oslo_messaging_rabbit] # # From oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_durable_queues # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues = false # Auto-delete queues in AMQP. (boolean value) #amqp_auto_delete = false # Enable SSL (boolean value) #ssl = # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some # distributions. (string value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version #ssl_version = # SSL key file (valid only if SSL enabled). (string value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile #ssl_key_file = # SSL cert file (valid only if SSL enabled). (string value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile #ssl_cert_file = # SSL certification authority file (valid only if SSL enabled). (string value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs #ssl_ca_file = # How long to wait before reconnecting in response to an AMQP consumer cancel # notification. (floating point value) #kombu_reconnect_delay = 1.0 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not # be used. This option may not be available in future versions. (string value) #kombu_compression = # How long to wait a missing client before abandoning to send it its replies. # This value should not be longer than rpc_response_timeout. (integer value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout #kombu_missing_consumer_retry_timeout = 60 # Determines how the next RabbitMQ node is chosen in case the one we are # currently connected to becomes unavailable. Takes effect only if more than # one RabbitMQ node is provided in config. (string value) # Allowed values: round-robin, shuffle #kombu_failover_strategy = round-robin # DEPRECATED: The RabbitMQ broker address where a single node is used. (string # value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_host = localhost # DEPRECATED: The RabbitMQ broker port where a single node is used. (port # value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_port = 5672 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_hosts = $rabbit_host:$rabbit_port # DEPRECATED: The RabbitMQ userid. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_userid = guest # DEPRECATED: The RabbitMQ password. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_password = guest # The RabbitMQ login method. (string value) # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO #rabbit_login_method = AMQPLAIN # DEPRECATED: The RabbitMQ virtual host. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_virtual_host = / # How frequently to retry connecting with RabbitMQ. (integer value) #rabbit_retry_interval = 1 # How long to backoff for between retries when connecting to RabbitMQ. (integer # value) #rabbit_retry_backoff = 2 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds. # (integer value) #rabbit_interval_max = 30 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 # (infinite retry count). (integer value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #rabbit_max_retries = 0 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring # is no longer controlled by the x-ha-policy argument when declaring a queue. # If you just want to make sure that all queues (except those with auto- # generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy # HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value) #rabbit_ha_queues = false # Positive integer representing duration in seconds for queue TTL (x-expires). # Queues which are unused for the duration of the TTL are automatically # deleted. The parameter affects only reply and fanout queues. (integer value) # Minimum value: 1 #rabbit_transient_queues_ttl = 1800 # Specifies the number of messages to prefetch. Setting to zero allows # unlimited messages. (integer value) #rabbit_qos_prefetch_count = 0 # Number of seconds after which the Rabbit broker is considered down if # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer # value) #heartbeat_timeout_threshold = 60 # How often times during the heartbeat_timeout_threshold we check the # heartbeat. (integer value) #heartbeat_rate = 2 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value) #fake_rabbit = false # Maximum number of channels to allow (integer value) #channel_max = # The maximum byte size for an AMQP frame (integer value) #frame_max = # How often to send heartbeats for consumer's connections (integer value) #heartbeat_interval = 3 # Arguments passed to ssl.wrap_socket (dict value) #ssl_options = # Set socket timeout in seconds for connection's socket (floating point value) #socket_timeout = 0.25 # Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point # value) #tcp_user_timeout = 0.25 # Set delay for reconnection to some host which has connection error (floating # point value) #host_connection_reconnect_delay = 0.25 # Connection factory implementation (string value) # Allowed values: new, single, read_write #connection_factory = single # Maximum number of connections to keep queued. (integer value) #pool_max_size = 30 # Maximum number of connections to create above `pool_max_size`. (integer # value) #pool_max_overflow = 0 # Default number of seconds to wait for a connections to available (integer # value) #pool_timeout = 30 # Lifetime of a connection (since creation) in seconds or None for no # recycling. Expired connections are closed on acquire. (integer value) #pool_recycle = 600 # Threshold at which inactive (since release) connections are considered stale # in seconds or None for no staleness. Stale connections are closed on acquire. # (integer value) #pool_stale = 60 # Default serialization mechanism for serializing/deserializing # outgoing/incoming messages (string value) # Allowed values: json, msgpack #default_serializer_type = json # Persist notification messages. (boolean value) #notification_persistence = false # Exchange name for sending notifications (string value) #default_notification_exchange = ${control_exchange}_notification # Max number of not acknowledged message which RabbitMQ can send to # notification listener. (integer value) #notification_listener_prefetch_count = 100 # Reconnecting retry count in case of connectivity problem during sending # notification, -1 means infinite retry. (integer value) #default_notification_retry_attempts = -1 # Reconnecting retry delay in case of connectivity problem during sending # notification message (floating point value) #notification_retry_delay = 0.25 # Time to live for rpc queues without consumers in seconds. (integer value) #rpc_queue_expiration = 60 # Exchange name for sending RPC messages (string value) #default_rpc_exchange = ${control_exchange}_rpc # Exchange name for receiving RPC replies (string value) #rpc_reply_exchange = ${control_exchange}_rpc_reply # Max number of not acknowledged message which RabbitMQ can send to rpc # listener. (integer value) #rpc_listener_prefetch_count = 100 # Max number of not acknowledged message which RabbitMQ can send to rpc reply # listener. (integer value) #rpc_reply_listener_prefetch_count = 100 # Reconnecting retry count in case of connectivity problem during sending # reply. -1 means infinite retry during rpc_timeout (integer value) #rpc_reply_retry_attempts = -1 # Reconnecting retry delay in case of connectivity problem during sending # reply. (floating point value) #rpc_reply_retry_delay = 0.25 # Reconnecting retry count in case of connectivity problem during sending RPC # message, -1 means infinite retry. If actual retry attempts in not 0 the rpc # request could be processed more than one time (integer value) #default_rpc_retry_attempts = -1 # Reconnecting retry delay in case of connectivity problem during sending RPC # message (floating point value) #rpc_retry_delay = 0.25 [oslo_messaging_zmq] # # From oslo.messaging # # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. # The "host" option should point or resolve to this address. (string value) #rpc_zmq_bind_address = * # MatchMaker driver. (string value) # Allowed values: redis, sentinel, dummy #rpc_zmq_matchmaker = redis # Number of ZeroMQ contexts, defaults to 1. (integer value) #rpc_zmq_contexts = 1 # Maximum number of ingress messages to locally buffer per topic. Default is # unlimited. (integer value) #rpc_zmq_topic_backlog = # Directory for holding IPC sockets. (string value) #rpc_zmq_ipc_dir = /var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match # "host" option, if running Nova. (string value) #rpc_zmq_host = localhost # Number of seconds to wait before all pending messages will be sent after # closing a socket. The default value of -1 specifies an infinite linger # period. The value of 0 specifies no linger period. Pending messages shall be # discarded immediately when the socket is closed. Positive values specify an # upper bound for the linger period. (integer value) # Deprecated group/name - [DEFAULT]/rpc_cast_timeout #zmq_linger = -1 # The default number of seconds that poll should wait. Poll raises timeout # exception when timeout expired. (integer value) #rpc_poll_timeout = 1 # Expiration timeout in seconds of a name service record about existing target # ( < 0 means no timeout). (integer value) #zmq_target_expire = 300 # Update period in seconds of a name service record about existing target. # (integer value) #zmq_target_update = 180 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean # value) #use_pub_sub = false # Use ROUTER remote proxy. (boolean value) #use_router_proxy = false # This option makes direct connections dynamic or static. It makes sense only # with use_router_proxy=False which means to use direct connections for direct # message types (ignored otherwise). (boolean value) #use_dynamic_connections = false # How many additional connections to a host will be made for failover reasons. # This option is actual only in dynamic connections mode. (integer value) #zmq_failover_connections = 2 # Minimal port number for random ports range. (port value) # Minimum value: 0 # Maximum value: 65535 #rpc_zmq_min_port = 49153 # Maximal port number for random ports range. (integer value) # Minimum value: 1 # Maximum value: 65536 #rpc_zmq_max_port = 65536 # Number of retries to find free port number before fail with ZMQBindError. # (integer value) #rpc_zmq_bind_port_retries = 100 # Default serialization mechanism for serializing/deserializing # outgoing/incoming messages (string value) # Allowed values: json, msgpack #rpc_zmq_serialization = json # This option configures round-robin mode in zmq socket. True means not keeping # a queue when server side disconnects. False means to keep queue and messages # even if server is disconnected, when the server appears we send all # accumulated messages to it. (boolean value) #zmq_immediate = true # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any # other negative value) means to skip any overrides and leave it to OS default; # 0 and 1 (or any other positive value) mean to disable and enable the option # respectively. (integer value) #zmq_tcp_keepalive = -1 # The duration between two keepalive transmissions in idle condition. The unit # is platform dependent, for example, seconds in Linux, milliseconds in Windows # etc. The default value of -1 (or any other negative value and 0) means to # skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_idle = -1 # The number of retransmissions to be carried out before declaring that remote # end is not available. The default value of -1 (or any other negative value # and 0) means to skip any overrides and leave it to OS default. (integer # value) #zmq_tcp_keepalive_cnt = -1 # The duration between two successive keepalive retransmissions, if # acknowledgement to the previous keepalive transmission is not received. The # unit is platform dependent, for example, seconds in Linux, milliseconds in # Windows etc. The default value of -1 (or any other negative value and 0) # means to skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_intvl = -1 # Maximum number of (green) threads to work concurrently. (integer value) #rpc_thread_pool_size = 100 # Expiration timeout in seconds of a sent/received message after which it is # not tracked anymore by a client/server. (integer value) #rpc_message_ttl = 300 # Wait for message acknowledgements from receivers. This mechanism works only # via proxy without PUB/SUB. (boolean value) #rpc_use_acks = false # Number of seconds to wait for an ack from a cast/call. After each retry # attempt this timeout is multiplied by some specified multiplier. (integer # value) #rpc_ack_timeout_base = 15 # Number to multiply base ack timeout by after each retry attempt. (integer # value) #rpc_ack_timeout_multiplier = 2 # Default number of message sending attempts in case of any problems occurred: # positive value N means at most N retries, 0 means no retries, None or -1 (or # any other negative values) mean to retry forever. This option is used only if # acknowledgments are enabled. (integer value) #rpc_retry_attempts = 3 # List of publisher hosts SubConsumer can subscribe on. This option has higher # priority then the default publishers list taken from the matchmaker. (list # value) #subscribe_on = [oslo_policy] # # From oslo.policy # # The file that defines policies. (string value) #policy_file = policy.json # Default rule. Enforced when a requested rule is not found. (string value) #policy_default_rule = default # Directories where policy configuration files are stored. They can be relative # to any directory in the search path defined by the config_dir option, or # absolute paths. The file defined by policy_file must exist for these # directories to be searched. Missing or empty directories are ignored. (multi # valued) #policy_dirs = policy.d [profiler] # # OSprofiler library allows to trace requests going through various OpenStack # services and create the accumulated report of what time was spent on each # request processing step. # # From magnum.conf # # # Enables the profiling for all services on this node. Default value is False # (fully disable the profiling feature). # # Possible values: # # * True: Enables the feature # * False: Disables the feature. The profiling cannot be started via this # project # operations. If the profiling is triggered by another project, this project # part # will be empty. # (boolean value) # Deprecated group/name - [profiler]/profiler_enabled #enabled = false # # Enables SQL requests profiling in services. Default value is False (SQL # requests won't be traced). # # Possible values: # # * True: Enables SQL requests profiling. Each SQL query will be part of the # trace and can the be analyzed by how much time was spent for that. # * False: Disables SQL requests profiling. The spent time is only shown on a # higher level of operations. Single SQL queries cannot be analyzed this # way. # (boolean value) #trace_sqlalchemy = false # # Secret key(s) to use for encrypting context data for performance profiling. # This string value should have the following format: # [,,...], # where each key is some random string. A user who triggers the profiling via # the REST API has to set one of these keys in the headers of the REST API call # to include profiling results of this node for this particular project. # # Both "enabled" flag and "hmac_keys" config options should be set to enable # profiling. Also, to generate correct profiling information across all # services # at least one key needs to be consistent between OpenStack projects. This # ensures it can be used from client side to generate the trace, containing # information from all possible resources. (string value) #hmac_keys = SECRET_KEY # # Connection string for a notifier backend. Default value is messaging:// which # sets the notifier to oslo_messaging. # # Examples of possible values: # # * messaging://: use oslo_messaging driver for sending notifications. # * mongodb://127.0.0.1:27017 : use mongodb driver for sending notifications. # * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for sending # notifications. # (string value) #connection_string = messaging:// # # Document type for notification indexing in elasticsearch. # (string value) #es_doc_type = notification # # This parameter is a time value parameter (for example: es_scroll_time=2m), # indicating for how long the nodes that participate in the search will # maintain # relevant resources in order to continue and support it. # (string value) #es_scroll_time = 2m # # Elasticsearch splits large requests in batches. This parameter defines # maximum size of each batch (for example: es_scroll_size=10000). # (integer value) #es_scroll_size = 10000 # # Redissentinel provides a timeout option on the connections. # This parameter defines that timeout (for example: socket_timeout=0.1). # (floating point value) #socket_timeout = 0.1 # # Redissentinel uses a service name to identify a master redis service. # This parameter defines the name (for example: # sentinal_service_name=mymaster). # (string value) #sentinel_service_name = mymaster [quotas] # # From magnum.conf # # Max number of clusters allowed per project. Admin can override this default # quota for a project by setting explicit limit in quotas DB table (using # /quotas REST API endpoint). (integer value) #max_clusters_per_project = 20 [trust] # # From magnum.conf # # This setting controls whether to assign a trust to the cluster user or not. # You will need to set it to True for clusters with volume_driver=cinder or # registry_enabled=true in the underlying cluster template to work. This is a # potential security risk since the trust gives instances OpenStack API access # to the cluster's project. Note that this setting does not affect per-cluster # trusts assigned to theMagnum service user. (boolean value) #cluster_user_trust = false # Id of the domain to create trustee for clusters (string value) #trustee_domain_id = # Name of the domain to create trustee for s (string value) #trustee_domain_name = # Id of the admin with roles sufficient to manage users in the trustee_domain # (string value) #trustee_domain_admin_id = # Name of the admin with roles sufficient to manage users in the trustee_domain # (string value) #trustee_domain_admin_name = # Id of the domain admin user's domain. trustee_domain_id is used by default # (string value) #trustee_domain_admin_domain_id = # Name of the domain admin user's domain. trustee_domain_name is used by # default (string value) #trustee_domain_admin_domain_name = # Password of trustee_domain_admin (string value) #trustee_domain_admin_password = # The roles which are delegated to the trustee by the trustor (list value) #roles = # Auth interface used by instances/trustee (string value) #trustee_keystone_interface = public [x509] # # From magnum.conf # # Certificate can get the CA flag in x509 extensions. (boolean value) #allow_ca = false # List of allowed x509 extensions. Available values: "authorityKeyIdentifier", # "subjectKeyIdentifier", "authorityInfoAccess", "basicConstraints", # "cRLDistributionPoints", "certificatePolicies", "extendedKeyUsage", # "OCSPNoCheck", "inhibitAnyPolicy", "keyUsage", "nameConstraints", # "subjectAltName", "issuerAltName" (list value) #allowed_extensions = keyUsage,extendedKeyUsage,subjectAltName,basicConstraints,subjectKeyIdentifier # List of allowed x509 key usage. Available values: "Digital Signature", "Non # Repudiation", "Key Encipherment", "Data Encipherment", "Key Agreement", # "Certificate Sign", "CRL Sign", "Encipher Only", "Decipher Only" (list value) #allowed_key_usage = Digital Signature,Key Encipherment,Non Repudiation # Number of days for which a certificate is valid. (integer value) #term_of_validity = 1825 # Size of generated private key. (integer value) #rsa_key_size = 2048