Ganesha Library

Ganesha Library

The Ganesha Library provides base classes that can be used by drivers to provision shares via NFS (NFSv3 and NFSv4), utilizing the NFS-Ganesha NFS server.

Supported operations

  • Allow NFS Share access
    • Only IP access type is supported.
  • Deny NFS Share access

Requirements

NFS-Ganesha 2.1 or newer.

NFS-Ganesha configuration

The library has just modest requirements against general NFS-Ganesha (in the following: Ganesha) configuration; a best effort was made to remain agnostic towards it as much as possible. This section describes the few requirements.

Note that Ganesha’s concept of storage backend modules is called FSAL (“File System Abstraction Layer”). The FSAL the driver intends to leverage needs to be enabled in Ganesha config.

Beyond that (with default manila config) the following line is needed to be present in the Ganesha config file (that defaults to /etc/ganesha/ganesha.conf):

%include /etc/ganesha/export.d/INDEX.conf

The above paths can be customized through manila configuration as follows:

  • ganesha_config_dir = toplevel directory for Ganesha configuration,

    defaults to /etc/ganesha

  • ganesha_config_path = location of the Ganesha config file, defaults

    to ganesha.conf in ganesha_config_dir

  • ganesha_export_dir = directory where manila generated config bits are

    stored, defaults to export.d in ganesha_config_dir. The following line is required to be included (with value expanded) in the Ganesha config file (at ganesha_config_path):

    %include <ganesha_export_dir>/INDEX.conf

Using Ganesha Library in drivers

A driver that wants to use the Ganesha Library has to inherit from driver.GaneshaMixin.

The driver has to contain a subclass of ganesha.GaneshaNASHelper, instantiate it along with the driver instance and delegate allow_access and deny_access methods to it (when appropriate, ie. when access_proto is NFS).

In the following we explain what has to be implemented by the ganesha.GaneshaNASHelper subclass (to which we refer as “helper class”).

Ganesha exports are described by so-called Ganesha export blocks (introduced in the 2.* release series), that is, snippets of Ganesha config specifying key-pair values.

The Ganesha Library generates sane default export blocks for the exports it manages, with one thing left blank, the so-called FSAL subblock. The helper class has to implement the _fsal_hook method which returns the FSAL subblock (in Python represented as a dict with string keys and values). It has one mandatory key, Name, to which the value should be the name of the FSAL (eg.: {"Name": "GLUSTER"}). Further content of it is optional and FSAL specific.

Customizing Ganesha exports

As noted, the Ganesha Library provides sane general defaults.

However, the driver is allowed to:

  • customize defaults
  • allow users to customize exports

The config format for Ganesha Library is called export block template. They are syntactically either Ganesha export blocks, (please consult the Ganesha documentation about the format), or isomorphic JSON (as Ganesha export blocks are by-and-large equivalent to arrayless JSON), with two special placeholders for values: @config and @runtime. @config means a value that shall be filled from manila config, and @runtime means a value that’s filled at runtime with dynamic data.

As an example, we show the library’s defaults in JSON format (also valid Python literal):

{
  "EXPORT": {
    "Export_Id": "@runtime",
    "Path": "@runtime",
    "FSAL": {
      "Name": "@config"
    },
    "Pseudo": "@runtime",
    "SecType": "sys",
    "Tag": "@runtime",
    "CLIENT": {
      "Clients": "@runtime",
      "Access_Type": "RW"
    },
    "Squash": "None"
  }
}

The Ganesha Library takes these values from

manila/share/drivers/ganesha/conf/00-base-export-template.conf

where the same data is stored in Ganesha conf format (also supplied with comments).

For customization, the driver has to extend the _default_config_hook method as follows:

  • take the result of the super method (a dict representing an export block template)
  • set up another export block dict that include your custom values, either by
    • using a predefined export block dict stored in code
    • loading a predefined export block from the manila source tree
    • loading an export block from an user exposed location (to allow user configuration)
  • merge the two export block dict using the ganesha_utils.patch method
  • return the result

With respect to loading export blocks, that can be done through the utility method _load_conf_dir.

Known Restrictions

  • The library does not support network segmented multi-tenancy model but instead works over a flat network, where the tenants share a network.

Known Issues

  • The export location for shares of a driver that uses the Ganesha Library will be of the format <ganesha-server>:/share-<share-id>. However, this is incomplete information, because it pertains only to NFSv3 access, which is partially broken. NFSv4 mounts work well but the actual NFSv4 export paths differ from the above. In detail:
    • The export location is usable only for NFSv3 mounts.
    • The export location works only for the first access rule that’s added for the given share. Tenants that should be allowed to access according to a further access rule will be refused (cf. https://bugs.launchpad.net/manila/+bug/1513061).
    • The share is, however, exported through NFSv4, just on paths that differ from the one indicated by the export location, namely at: <ganesha-server>:/share-<share-id>--<access-id>, where <access-id> ranges over the ID-s of access rules of the share (and the export with <access-id> is accessible according to the access rule of that ID).
    • NFSv4 access also works with pseudofs. That is, the tenant can do a v4 mount of``<ganesha-server>:/`` and access the shares allowed for her at the respective share-<share-id>--<access-id> subdirectories.

The manila.share.drivers.ganesha Module

class GaneshaNASHelper(execute, config, tag='<no name>', **kwargs)

Bases: manila.share.drivers.ganesha.NASHelperBase

Execute commands relating to Shares.

init_helper()

Initializes protocol-specific NAS drivers.

supported_access_levels = ('rw',)
supported_access_types = ('ip',)
update_access(base_path, share, add_rules, delete_rules, recovery=False)

Update access rules of share.

class NASHelperBase(execute, config, **kwargs)

Bases: object

Interface to work with share.

init_helper()

Initializes protocol-specific NAS drivers.

supported_access_levels = ()
supported_access_types = ()
update_access(base_path, share, add_rules, delete_rules, recovery=False)

Update access rules of share.

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.