ml2_conf.ini

ml2

type_drivers
Type

list

Default

local,flat,vlan,gre,vxlan,geneve

List of network type driver entrypoints to be loaded from the neutron.ml2.type_drivers namespace.

tenant_network_types
Type

list

Default

local

Ordered list of network_types to allocate as tenant networks. The default value ‘local’ is useful for single-box testing but provides no connectivity between hosts.

mechanism_drivers
Type

list

Default

''

An ordered list of networking mechanism driver entrypoints to be loaded from the neutron.ml2.mechanism_drivers namespace.

extension_drivers
Type

list

Default

''

An ordered list of extension driver entrypoints to be loaded from the neutron.ml2.extension_drivers namespace. For example: extension_drivers = port_security,qos

path_mtu
Type

integer

Default

0

Maximum size of an IP packet (MTU) that can traverse the underlying physical network infrastructure without fragmentation when using an overlay/tunnel protocol. This option allows specifying a physical network MTU value that differs from the default global_physnet_mtu value.

physical_network_mtus
Type

list

Default

''

A list of mappings of physical networks to MTU values. The format of the mapping is <physnet>:<mtu val>. This mapping allows specifying a physical network MTU value that differs from the default global_physnet_mtu value.

external_network_type
Type

string

Default

<None>

Default network type for external networks when no provider attributes are specified. By default it is None, which means that if provider attributes are not specified while creating external networks then they will have the same type as tenant networks. Allowed values for external_network_type config option depend on the network type values configured in type_drivers config option.

overlay_ip_version
Type

integer

Default

4

IP version of all overlay (tunnel) network endpoints. Use a value of 4 for IPv4 or 6 for IPv6.

ml2_type_flat

flat_networks
Type

list

Default

*

List of physical_network names with which flat networks can be created. Use default ‘*’ to allow flat networks with arbitrary physical_network names. Use an empty list to disable flat networks.

ml2_type_geneve

vni_ranges
Type

list

Default

''

Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of Geneve VNI IDs that are available for tenant network allocation

max_header_size
Type

integer

Default

30

Geneve encapsulation header size is dynamic, this value is used to calculate the maximum MTU for the driver. This is the sum of the sizes of the outer ETH + IP + UDP + GENEVE header sizes. The default size for this field is 50, which is the size of the Geneve header without any additional option headers.

ml2_type_gre

tunnel_id_ranges
Type

list

Default

''

Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation

ml2_type_vlan

network_vlan_ranges
Type

list

Default

''

List of <physical_network>:<vlan_min>:<vlan_max> or <physical_network> specifying physical_network names usable for VLAN provider and tenant networks, as well as ranges of VLAN tags on each available for allocation to tenant networks.

ml2_type_vxlan

vni_ranges
Type

list

Default

''

Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of VXLAN VNI IDs that are available for tenant network allocation

vxlan_group
Type

string

Default

<None>

Multicast group for VXLAN. When configured, will enable sending all broadcast traffic to this multicast group. When left unconfigured, will disable multicast VXLAN mode.

ovn

ovn_nb_connection
Type

string

Default

tcp:127.0.0.1:6641

The connection string for the OVN_Northbound OVSDB. Use tcp:IP:PORT for TCP connection. Use ssl:IP:PORT for SSL connection. The ovn_nb_private_key, ovn_nb_certificate and ovn_nb_ca_cert are mandatory. Use unix:FILE for unix domain socket connection.

ovn_nb_private_key
Type

string

Default

''

The PEM file with private key for SSL connection to OVN-NB-DB

ovn_nb_certificate
Type

string

Default

''

The PEM file with certificate that certifies the private key specified in ovn_nb_private_key

ovn_nb_ca_cert
Type

string

Default

''

The PEM file with CA certificate that OVN should use to verify certificates presented to it by SSL peers

ovn_sb_connection
Type

string

Default

tcp:127.0.0.1:6642

The connection string for the OVN_Southbound OVSDB. Use tcp:IP:PORT for TCP connection. Use ssl:IP:PORT for SSL connection. The ovn_sb_private_key, ovn_sb_certificate and ovn_sb_ca_cert are mandatory. Use unix:FILE for unix domain socket connection.

ovn_sb_private_key
Type

string

Default

''

The PEM file with private key for SSL connection to OVN-SB-DB

ovn_sb_certificate
Type

string

Default

''

The PEM file with certificate that certifies the private key specified in ovn_sb_private_key

ovn_sb_ca_cert
Type

string

Default

''

The PEM file with CA certificate that OVN should use to verify certificates presented to it by SSL peers

ovsdb_connection_timeout
Type

integer

Default

180

Timeout in seconds for the OVSDB connection transaction

ovsdb_retry_max_interval
Type

integer

Default

180

Max interval in seconds between each retry to get the OVN NB and SB IDLs

ovsdb_probe_interval
Type

integer

Default

60000

Minimum Value

0

The probe interval in for the OVSDB session in milliseconds. If this is zero, it disables the connection keepalive feature. If non-zero the value will be forced to at least 1000 milliseconds. Defaults to 60 seconds.

neutron_sync_mode
Type

string

Default

log

Valid Values

off, log, repair

The synchronization mode of OVN_Northbound OVSDB with Neutron DB. off - synchronization is off log - during neutron-server startup, check to see if OVN is in sync with the Neutron database. Log warnings for any inconsistencies found so that an admin can investigate repair - during neutron-server startup, automatically create resources found in Neutron but not in OVN. Also remove resources from OVN that are no longer in Neutron.

ovn_l3_mode
Type

boolean

Default

true

Whether to use OVN native L3 support. Do not change the value for existing deployments that contain routers.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

This option is no longer used. Native L3 support in OVN is always used.

ovn_l3_scheduler
Type

string

Default

leastloaded

Valid Values

leastloaded, chance

The OVN L3 Scheduler type used to schedule router gateway ports on hypervisors/chassis. leastloaded - chassis with fewest gateway ports selected chance - chassis randomly selected

enable_distributed_floating_ip
Type

boolean

Default

false

Enable distributed floating IP support. If True, the NAT action for floating IPs will be done locally and not in the centralized gateway. This saves the path to the external network. This requires the user to configure the physical network map (i.e. ovn-bridge-mappings) on each compute node.

vif_type
Type

string

Default

ovs

Valid Values

ovs, vhostuser

Type of VIF to be used for ports valid values are (ovs, vhostuser) default ovs

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

The port VIF type is now determined based on the OVN chassis information when the port is bound to a host.

vhost_sock_dir
Type

string

Default

/var/run/openvswitch

The directory in which vhost virtio socket is created by all the vswitch daemons

dhcp_default_lease_time
Type

integer

Default

43200

Default least time (in seconds) to use with OVN’s native DHCP service.

ovsdb_log_level
Type

string

Default

INFO

Valid Values

CRITICAL, ERROR, WARNING, INFO, DEBUG

The log level used for OVSDB

ovn_metadata_enabled
Type

boolean

Default

false

Whether to use metadata service.

dns_servers
Type

list

Default

''

Comma-separated list of the DNS servers which will be used as forwarders if a subnet’s dns_nameservers field is empty. If both subnet’s dns_nameservers and this option is empty, then the DNS resolvers on the host running the neutron server will be used.

ovn_dhcp4_global_options
Type

dict

Default

''

Dictionary of global DHCPv4 options which will be automatically set on each subnet upon creation and on all existing subnets when Neutron starts. An empty value for a DHCP option will cause that option to be unset globally. EXAMPLES: - ntp_server:1.2.3.4,wpad:1.2.3.5 - Set ntp_server and wpad - ntp_server:,wpad:1.2.3.5 - Unset ntp_server and set wpad See the ovn-nb(5) man page for available options.

ovn_dhcp6_global_options
Type

dict

Default

''

Dictionary of global DHCPv6 options which will be automatically set on each subnet upon creation and on all existing subnets when Neutron starts. An empty value for a DHCP option will cause that option to be unset globally. EXAMPLES: - ntp_server:1.2.3.4,wpad:1.2.3.5 - Set ntp_server and wpad - ntp_server:,wpad:1.2.3.5 - Unset ntp_server and set wpad See the ovn-nb(5) man page for available options.

ovn_emit_need_to_frag
Type

boolean

Default

false

Configure OVN to emit “need to frag” packets in case of MTU mismatch. Before enabling this configuration make sure that its supported by the host kernel (version >= 5.2) or by checking the output of the following command: ovs-appctl -t ovs-vswitchd dpif/show-dp-features br-int | grep “Check pkt length action”.

ovs

igmp_snooping_enable
Type

boolean

Default

false

Enable IGMP snooping for integration bridge. If this option is set to True, support for Internet Group Management Protocol (IGMP) is enabled in integration bridge. Setting this option to True will also enable Open vSwitch mcast-snooping-disable-flood-unregistered flag. This option will disable flooding of unregistered multicast packets to all ports. The switch will send unregistered multicast packets only to ports connected to multicast routers.

ovs_driver

vnic_type_blacklist
Type

list

Default

''

Comma-separated list of VNIC types for which support is administratively prohibited by the mechanism driver. Please note that the supported vnic_types depend on your network interface card, on the kernel version of your operating system, and on other factors, like OVS version. In case of ovs mechanism driver the valid vnic types are normal and direct. Note that direct is supported only from kernel 4.8, and from ovs 2.8.0. Bind DIRECT (SR-IOV) port allows to offload the OVS flows using tc to the SR-IOV NIC. This allows to support hardware offload via tc and that allows us to manage the VF by OpenFlow control plane using representor net-device.

securitygroup

firewall_driver
Type

string

Default

<None>

Driver for security groups firewall in the L2 agent

enable_security_group
Type

boolean

Default

true

Controls whether the neutron security group API is enabled in the server. It should be false when using no security groups or using the nova security group API.

enable_ipset
Type

boolean

Default

true

Use ipset to speed-up the iptables based security groups. Enabling ipset support requires that ipset is installed on L2 agent node.

permitted_ethertypes
Type

list

Default

''

Comma-separated list of ethertypes to be permitted, in hexadecimal (starting with “0x”). For example, “0x4008” to permit InfiniBand.

sriov_driver

vnic_type_blacklist
Type

list

Default

''

Comma-separated list of VNIC types for which support is administratively prohibited by the mechanism driver. Please note that the supported vnic_types depend on your network interface card, on the kernel version of your operating system, and on other factors. In case of sriov mechanism driver the valid VNIC types are direct, macvtap and direct-physical.