neutron.conf¶
DEFAULT¶
- run_external_periodic_tasks¶
- Type
boolean
- Default
True
Some periodic tasks can be run in a separate process. Should we run them here?
- backdoor_port¶
- Type
string
- Default
<None>
Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.
- backdoor_socket¶
- Type
string
- Default
<None>
Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with ‘backdoor_port’ in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option. Inside the path {pid} will be replaced with the PID of the current process.
- log_options¶
- Type
boolean
- Default
True
Enables or disables logging values of all registered options when starting a service (at DEBUG level).
- graceful_shutdown_timeout¶
- Type
integer
- Default
60
Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.
- api_paste_config¶
- Type
string
- Default
api-paste.ini
File name for the paste.deploy config for api service
- wsgi_log_format¶
- Type
string
- Default
%(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
A python format string that is used as the template to generate log lines. The following values can beformatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.
- tcp_keepidle¶
- Type
integer
- Default
600
Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not supported on OS X.
- wsgi_default_pool_size¶
- Type
integer
- Default
100
Size of the pool of greenthreads used by wsgi
- max_header_line¶
- Type
integer
- Default
16384
Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated when keystone is configured to use PKI tokens with big service catalogs).
- wsgi_keep_alive¶
- Type
boolean
- Default
True
If False, closes the client socket connection explicitly.
- client_socket_timeout¶
- Type
integer
- Default
900
Timeout for client connections’ socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value of ‘0’ means wait forever.
- wsgi_server_debug¶
- Type
boolean
- Default
False
True if the server should send exception tracebacks to the clients on 500 errors. If False, the server will respond with empty bodies.
- state_path¶
- Type
string
- Default
/var/lib/neutron
Where to store Neutron state files. This directory must be writable by the agent.
- bind_host¶
- Type
host address
- Default
0.0.0.0
The host IP to bind to.
- bind_port¶
- Type
port number
- Default
9696
- Minimum Value
0
- Maximum Value
65535
The port to bind to
- api_extensions_path¶
- Type
string
- Default
''
The path for API extensions. Note that this can be a colon-separated list of paths. For example: api_extensions_path = extensions:/path/to/more/exts:/even/more/exts. The __path__ of neutron.extensions is appended to this, so if your extensions are in there you don’t need to specify them here.
- auth_strategy¶
- Type
string
- Default
keystone
The type of authentication to use
- core_plugin¶
- Type
string
- Default
<None>
The core plugin Neutron will use
- service_plugins¶
- Type
list
- Default
[]
The service plugins Neutron will use
- base_mac¶
- Type
string
- Default
fa:16:3e:00:00:00
The base MAC address Neutron will use for VIFs. The first 3 octets will remain unchanged. If the 4th octet is not 00, it will also be used. The others will be randomly generated.
- allow_bulk¶
- Type
boolean
- Default
True
Allow the usage of the bulk API
- pagination_max_limit¶
- Type
string
- Default
-1
The maximum number of items returned in a single response, value was ‘infinite’ or negative integer means no limit
- default_availability_zones¶
- Type
list
- Default
[]
Default value of availability zone hints. The availability zone aware schedulers use this when the resources availability_zone_hints is empty. Multiple availability zones can be specified by a comma separated string. This value can be empty. In this case, even if availability_zone_hints for a resource is empty, availability zone is considered for high availability while scheduling the resource.
- max_dns_nameservers¶
- Type
integer
- Default
5
Maximum number of DNS nameservers per subnet
- max_subnet_host_routes¶
- Type
integer
- Default
20
Maximum number of host routes per subnet
- ipv6_pd_enabled¶
- Type
boolean
- Default
False
Warning: This feature is experimental with low test coverage, and the Dibbler client which is used for this feature is no longer maintained! Enables IPv6 Prefix Delegation for automatic subnet CIDR allocation. Set to True to enable IPv6 Prefix Delegation for subnet allocation in a PD-capable environment. Users making subnet creation requests for IPv6 subnets without providing a CIDR or subnetpool ID will be given a CIDR via the Prefix Delegation mechanism. Note that enabling PD will override the behavior of the default IPv6 subnetpool.
- dhcp_lease_duration¶
- Type
integer
- Default
86400
DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite lease times.
- dns_domain¶
- Type
string
- Default
openstacklocal
Domain to use for building the hostnames
- external_dns_driver¶
- Type
string
- Default
<None>
Driver for external DNS integration.
- dhcp_agent_notification¶
- Type
boolean
- Default
True
Allow sending resource operation notification to DHCP agent
- host¶
- Type
host address
- Default
example.domain
This option has a sample default set, which means that its actual default value may vary from the one documented above.
Hostname to be used by the Neutron server, agents and services running on this machine. All the agents and services running on this machine must use the same host value.
- network_link_prefix¶
- Type
string
- Default
<None>
This string is prepended to the normal URL that is returned in links to the OpenStack Network API. If it is empty (the default), the URLs are returned unchanged.
- notify_nova_on_port_status_changes¶
- Type
boolean
- Default
True
Send notification to nova when port status changes
- notify_nova_on_port_data_changes¶
- Type
boolean
- Default
True
Send notification to nova when port data (fixed_ips/floatingip) changes so nova can update its cache.
- send_events_interval¶
- Type
integer
- Default
2
Number of seconds between sending events to nova if there are any events to send.
- setproctitle¶
- Type
string
- Default
on
Set process name to match child worker role. Available options are: ‘off’ - retains the previous behavior; ‘on’ - renames processes to ‘neutron-server: role (original string)’; ‘brief’ - renames the same as ‘on’, but without the original string, such as ‘neutron-server: role’.
- ipam_driver¶
- Type
string
- Default
internal
Neutron IPAM (IP address management) driver to use. By default, the reference implementation of the Neutron IPAM driver is used.
- vlan_transparent¶
- Type
boolean
- Default
False
If True, then allow plugins that support it to create VLAN transparent networks.
- filter_validation¶
- Type
boolean
- Default
True
If True, then allow plugins to decide whether to perform validations on filter parameters. Filter validation is enabled if this config is turned on and it is supported by all plugins
- global_physnet_mtu¶
- Type
integer
- Default
1500
MTU of the underlying physical network. Neutron uses this value to calculate MTU for all virtual network components. For flat and VLAN networks, neutron uses this value without modification. For overlay networks such as VXLAN, neutron automatically subtracts the overlay protocol overhead from this value. Defaults to 1500, the standard value for Ethernet.
¶ Group
Name
ml2
segment_mtu
- http_retries¶
- Type
integer
- Default
3
- Minimum Value
0
Number of times client connections (nova, ironic) should be retried on a failed HTTP call. 0 (zero) means connection is attempted only once (not retried). Setting to any positive integer means that on failure the connection is retried that many times. For example, setting to 3 means total attempts to connect will be 4.
- enable_traditional_dhcp¶
- Type
boolean
- Default
True
If False, neutron-server will disable the following DHCP-agent related functions:1. DHCP provisioning block 2. DHCP scheduler API extension 3. Network scheduling mechanism 4. DHCP RPC/notification
- backlog¶
- Type
integer
- Default
4096
Number of backlog requests to configure the socket with
- retry_until_window¶
- Type
integer
- Default
30
Number of seconds to keep retrying to listen
- use_ssl¶
- Type
boolean
- Default
False
Enable SSL on the API server
- periodic_interval¶
- Type
integer
- Default
40
Seconds between running periodic tasks.
- api_workers¶
- Type
integer
- Default
<None>
Number of separate API worker processes for service. If not specified, the default is equal to the number of CPUs available for best performance, capped by potential RAM usage.
- rpc_workers¶
- Type
integer
- Default
<None>
Number of RPC worker processes for service. If not specified, the default is equal to half the number of API workers.
- rpc_state_report_workers¶
- Type
integer
- Default
1
Number of RPC worker processes dedicated to state reports queue.
- periodic_fuzzy_delay¶
- Type
integer
- Default
5
Range of seconds to randomly delay when starting the periodic task scheduler to reduce stampeding. (Disable by setting to 0)
- rpc_response_max_timeout¶
- Type
integer
- Default
600
Maximum seconds to wait for a response from an RPC call.
- interface_driver¶
- Type
string
- Default
<None>
The driver used to manage the virtual interface.
- metadata_proxy_socket¶
- Type
string
- Default
$state_path/metadata_proxy
Location for Metadata Proxy UNIX domain socket.
- metadata_proxy_user¶
- Type
string
- Default
''
User (uid or name) running metadata proxy after its initialization (if empty: agent effective user).
- metadata_proxy_group¶
- Type
string
- Default
''
Group (gid or name) running metadata proxy after its initialization (if empty: agent effective group).
- agent_down_time¶
- Type
integer
- Default
75
- Maximum Value
2147483.0
Seconds to regard the agent is down; should be at least twice report_interval, to be sure the agent is down for good.
- dhcp_load_type¶
- Type
string
- Default
networks
- Valid Values
networks, subnets, ports
Representing the resource type whose load is being reported by the agent. This can be “networks”, “subnets” or “ports”. When specified (Default is networks), the server will extract particular load sent as part of its agent configuration object from the agent report state, which is the number of resources being consumed, at every report_interval.dhcp_load_type can be used in combination with network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.WeightScheduler When the network_scheduler_driver is WeightScheduler, dhcp_load_type can be configured to represent the choice for the resource being balanced. Example: dhcp_load_type=networks
- enable_new_agents¶
- Type
boolean
- Default
True
Agent starts with admin_state_up=False when enable_new_agents=False. In the case, user’s resources will not be scheduled automatically to the agent until admin changes admin_state_up to True.
- rpc_resources_processing_step¶
- Type
integer
- Default
20
- Minimum Value
1
Number of resources for neutron to divide the large RPC call data sets. It can be reduced if RPC timeout occurred. The best value can be determined empirically in your environment.
- max_routes¶
- Type
integer
- Default
30
Maximum number of routes per router
- enable_snat_by_default¶
- Type
boolean
- Default
True
Define the default value of enable_snat if not provided in external_gateway_info.
- network_scheduler_driver¶
- Type
string
- Default
neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
Driver to use for scheduling network to DHCP agent
- network_auto_schedule¶
- Type
boolean
- Default
True
Allow auto scheduling networks to DHCP agent.
- allow_automatic_dhcp_failover¶
- Type
boolean
- Default
True
Automatically remove networks from offline DHCP agents.
- dhcp_agents_per_network¶
- Type
integer
- Default
1
- Minimum Value
1
Number of DHCP agents scheduled to host a tenant network. If this number is greater than 1, the scheduler automatically assigns multiple DHCP agents for a given tenant network, providing high availability for the DHCP service. However this does not provide high availability for the IPv6 metadata service in isolated networks.
- enable_services_on_agents_with_admin_state_down¶
- Type
boolean
- Default
False
Enable services on an agent with admin_state_up False. If this option is False, when admin_state_up of an agent is turned False, services on it will be disabled. Agents with admin_state_up False are not selected for automatic scheduling regardless of this option. But manual scheduling to such agents is available if this option is True.
- dvr_base_mac¶
- Type
string
- Default
fa:16:3f:00:00:00
The base mac address used for unique DVR instances by Neutron. The first 3 octets will remain unchanged. If the 4th octet is not 00, it will also be used. The others will be randomly generated. The ‘dvr_base_mac’ must be different from ‘base_mac’ to avoid mixing them up with MAC’s allocated for tenant ports. A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00. The default is 3 octet
- router_distributed¶
- Type
boolean
- Default
False
System-wide flag to determine the type of router that tenants can create. Only admin can override.
- enable_dvr¶
- Type
boolean
- Default
True
Determine if setup is configured for DVR. If False, DVR API extension will be disabled.
- host_dvr_for_dhcp¶
- Type
boolean
- Default
True
Flag to determine if hosting a DVR local router to the DHCP agent is desired. If False, any L3 function supported by the DHCP agent instance will not be possible, for instance: DNS.
- router_scheduler_driver¶
- Type
string
- Default
neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
Driver to use for scheduling router to a default L3 agent
- router_auto_schedule¶
- Type
boolean
- Default
True
Allow auto scheduling of routers to L3 agent.
- allow_automatic_l3agent_failover¶
- Type
boolean
- Default
False
Automatically reschedule routers from offline L3 agents to online L3 agents.
- l3_ha¶
- Type
boolean
- Default
False
Enable HA mode for virtual routers.
- max_l3_agents_per_router¶
- Type
integer
- Default
3
Maximum number of L3 agents which a HA router will be scheduled on. If it is set to 0 then the router will be scheduled on every agent.
- l3_ha_net_cidr¶
- Type
string
- Default
169.254.192.0/18
Subnet used for the l3 HA admin network.
- l3_ha_network_type¶
- Type
string
- Default
''
The network type to use when creating the HA network for an HA router. By default or if empty, the first ‘tenant_network_types’ is used. This is helpful when the VRRP traffic should use a specific network which is not the default one.
- l3_ha_network_physical_name¶
- Type
string
- Default
''
The physical network name with which the HA network can be created.
- max_allowed_address_pair¶
- Type
integer
- Default
10
Maximum number of allowed address pairs
- allowed_conntrack_helpers¶
- Type
list
- Default
[{'tftp': 'udp'}, {'ftp': 'tcp'}, {'sip': 'tcp'}, {'sip': 'udp'}]
This option has a sample default set, which means that its actual default value may vary from the one documented above.
Defines the allowed conntrack helpers, and conntack helper module protocol constraints.
- debug¶
- Type
boolean
- Default
False
- Mutable
This option can be changed without restarting.
If set to true, the logging level will be set to DEBUG instead of the default INFO level.
- log_config_append¶
- Type
string
- Default
<None>
- Mutable
This option can be changed without restarting.
The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).
¶ Group
Name
DEFAULT
log-config
DEFAULT
log_config
- log_date_format¶
- Type
string
- Default
%Y-%m-%d %H:%M:%S
Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.
- log_file¶
- Type
string
- Default
<None>
(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.
¶ Group
Name
DEFAULT
logfile
- log_dir¶
- Type
string
- Default
<None>
(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.
¶ Group
Name
DEFAULT
logdir
- watch_log_file¶
- Type
boolean
- Default
False
Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.
- use_syslog¶
- Type
boolean
- Default
False
Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.
- use_journal¶
- Type
boolean
- Default
False
Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.
- syslog_log_facility¶
- Type
string
- Default
LOG_USER
Syslog facility to receive log lines. This option is ignored if log_config_append is set.
- use_json¶
- Type
boolean
- Default
False
Use JSON formatting for logging. This option is ignored if log_config_append is set.
- use_stderr¶
- Type
boolean
- Default
False
Log output to standard error. This option is ignored if log_config_append is set.
- use_eventlog¶
- Type
boolean
- Default
False
Log output to Windows Event Log.
- log_rotate_interval¶
- Type
integer
- Default
1
The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is set to “interval”.
- log_rotate_interval_type¶
- Type
string
- Default
days
- Valid Values
Seconds, Minutes, Hours, Days, Weekday, Midnight
Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.
- max_logfile_count¶
- Type
integer
- Default
30
Maximum number of rotated log files.
- max_logfile_size_mb¶
- Type
integer
- Default
200
Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.
- log_rotation_type¶
- Type
string
- Default
none
- Valid Values
interval, size, none
Log rotation type.
Possible values
- interval
Rotate logs at predefined time intervals.
- size
Rotate logs once they reach a predefined size.
- none
Do not rotate log files.
- logging_context_format_string¶
- Type
string
- Default
%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s
Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter
- logging_default_format_string¶
- Type
string
- Default
%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter
- logging_debug_format_suffix¶
- Type
string
- Default
%(funcName)s %(pathname)s:%(lineno)d
Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter
- logging_exception_prefix¶
- Type
string
- Default
%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter
- logging_user_identity_format¶
- Type
string
- Default
%(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s
Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
- default_log_levels¶
- Type
list
- Default
['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']
List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.
- publish_errors¶
- Type
boolean
- Default
False
Enables or disables publication of error events.
- instance_format¶
- Type
string
- Default
"[instance: %(uuid)s] "
The format for an instance that is passed with the log message.
- instance_uuid_format¶
- Type
string
- Default
"[instance: %(uuid)s] "
The format for an instance UUID that is passed with the log message.
- rate_limit_interval¶
- Type
integer
- Default
0
Interval, number of seconds, of log rate limiting.
- rate_limit_burst¶
- Type
integer
- Default
0
Maximum number of logged messages per rate_limit_interval.
- rate_limit_except_level¶
- Type
string
- Default
CRITICAL
Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.
- fatal_deprecations¶
- Type
boolean
- Default
False
Enables or disables fatal status of deprecations.
- rpc_conn_pool_size¶
- Type
integer
- Default
30
- Minimum Value
1
Size of RPC connection pool.
¶ Group
Name
DEFAULT
rpc_conn_pool_size
- conn_pool_min_size¶
- Type
integer
- Default
2
The pool size limit for connections expiration policy
- conn_pool_ttl¶
- Type
integer
- Default
1200
The time-to-live in sec of idle connections in the pool
- executor_thread_pool_size¶
- Type
integer
- Default
64
Size of executor thread pool when executor is threading or eventlet.
¶ Group
Name
DEFAULT
rpc_thread_pool_size
- rpc_response_timeout¶
- Type
integer
- Default
60
Seconds to wait for a response from a call.
- transport_url¶
- Type
string
- Default
rabbit://
The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:
driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
Example: rabbit://rabbitmq:password@127.0.0.1:5672//
For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
- control_exchange¶
- Type
string
- Default
openstack
The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.
- rpc_ping_enabled¶
- Type
boolean
- Default
False
Add an endpoint to answer to ping calls. Endpoint is named oslo_rpc_server_ping
agent¶
- root_helper¶
- Type
string
- Default
sudo
Root helper application. Use ‘sudo neutron-rootwrap /etc/neutron/rootwrap.conf’ to use the real root filter facility. Change to ‘sudo’ to skip the filtering and just run the command directly.
- use_helper_for_ns_read¶
- Type
boolean
- Default
True
Use the root helper when listing the namespaces on a system. This may not be required depending on the security configuration. If the root helper is not required, set this to False for a performance improvement.
- root_helper_daemon¶
- Type
string
- Default
<None>
Root helper daemon application to use when possible.
Use ‘sudo neutron-rootwrap-daemon /etc/neutron/rootwrap.conf’ to run rootwrap in “daemon mode” which has been reported to improve performance at scale. For more information on running rootwrap in “daemon mode”, see:
https://docs.openstack.org/oslo.rootwrap/latest/user/usage.html#daemon-mode
- report_interval¶
- Type
floating point
- Default
30
Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time.
- log_agent_heartbeats¶
- Type
boolean
- Default
False
Log agent heartbeats
- comment_iptables_rules¶
- Type
boolean
- Default
True
Add comments to iptables rules. Set to false to disallow the addition of comments to generated iptables rules that describe each rule’s purpose. System must support the iptables comments module for addition of comments.
- debug_iptables_rules¶
- Type
boolean
- Default
False
Duplicate every iptables difference calculation to ensure the format being generated matches the format of iptables-save. This option should not be turned on for production systems because it imposes a performance penalty.
- use_random_fully¶
- Type
boolean
- Default
True
Use random-fully in SNAT masquerade rules.
- check_child_processes_action¶
- Type
string
- Default
respawn
- Valid Values
respawn, exit
Action to be executed when a child process dies
- check_child_processes_interval¶
- Type
integer
- Default
60
Interval between checks of child process liveness (seconds), use 0 to disable
- kill_scripts_path¶
- Type
string
- Default
/etc/neutron/kill_scripts/
Location of scripts used to kill external processes. Names of scripts here must follow the pattern: “<process-name>-kill” where <process-name> is name of the process which should be killed using this script. For example, kill script for dnsmasq process should be named “dnsmasq-kill”. If path is set to None, then default “kill” command will be used to stop processes.
- availability_zone¶
- Type
string
- Default
nova
Availability zone of this node
cache¶
- config_prefix¶
- Type
string
- Default
cache.oslo
Prefix for building the configuration dictionary for the cache region. This should not need to be changed unless there is another dogpile.cache region with the same configuration name.
- expiration_time¶
- Type
integer
- Default
600
Default TTL, in seconds, for any cached item in the dogpile.cache region. This applies to any cached method that doesn’t have an explicit cache expiration time defined for it.
- backend¶
- Type
string
- Default
dogpile.cache.null
- Valid Values
oslo_cache.memcache_pool, oslo_cache.dict, oslo_cache.mongo, oslo_cache.etcd3gw, dogpile.cache.pymemcache, dogpile.cache.memcached, dogpile.cache.pylibmc, dogpile.cache.bmemcached, dogpile.cache.dbm, dogpile.cache.redis, dogpile.cache.memory, dogpile.cache.memory_pickle, dogpile.cache.null
Cache backend module. For eventlet-based or environments with hundreds of threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is recommended. For environments with less than 100 threaded servers, Memcached (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test environments with a single instance of the server can use the dogpile.cache.memory backend.
- backend_argument¶
- Type
multi-valued
- Default
''
Arguments supplied to the backend module. Specify this option once per argument to be passed to the dogpile.cache backend. Example format: “<argname>:<value>”.
- proxies¶
- Type
list
- Default
[]
Proxy classes to import that will affect the way the dogpile.cache backend functions. See the dogpile.cache documentation on changing-backend-behavior.
- enabled¶
- Type
boolean
- Default
False
Global toggle for caching.
- debug_cache_backend¶
- Type
boolean
- Default
False
Extra debugging from the cache backend (cache keys, get/set/delete/etc calls). This is only really useful if you need to see the specific cache-backend get/set/delete calls with the keys/values. Typically this should be left set to false.
- memcache_servers¶
- Type
list
- Default
['localhost:11211']
Memcache servers in the format of “host:port”. This is used by backends dependent on Memcached.If
dogpile.cache.memcached
oroslo_cache.memcache_pool
is used and a given host refer to an IPv6 or a given domain refer to IPv6 then you should prefix the given address withthe address family (inet6
) (e.ginet6[::1]:11211
,inet6:[fd12:3456:789a:1::1]:11211
,inet6:[controller-0.internalapi]:11211
). If the address family is not given then these backends will use the defaultinet
address family which corresponds to IPv4
- memcache_dead_retry¶
- Type
integer
- Default
300
Number of seconds memcached server is considered dead before it is tried again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
- memcache_socket_timeout¶
- Type
floating point
- Default
1.0
Timeout in seconds for every call to a server. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
- memcache_pool_maxsize¶
- Type
integer
- Default
10
Max total number of open connections to every memcached server. (oslo_cache.memcache_pool backend only).
- memcache_pool_unused_timeout¶
- Type
integer
- Default
60
Number of seconds a connection to memcached is held unused in the pool before it is closed. (oslo_cache.memcache_pool backend only).
- memcache_pool_connection_get_timeout¶
- Type
integer
- Default
10
Number of seconds that an operation will wait to get a memcache client connection.
- memcache_pool_flush_on_reconnect¶
- Type
boolean
- Default
False
Global toggle if memcache will be flushed on reconnect. (oslo_cache.memcache_pool backend only).
- memcache_sasl_enabled¶
- Type
boolean
- Default
False
Enable the SASL(Simple Authentication and SecurityLayer) if the SASL_enable is true, else disable.
- memcache_username¶
- Type
string
- Default
''
the user name for the memcached which SASL enabled
- memcache_password¶
- Type
string
- Default
''
the password for the memcached which SASL enabled
- tls_enabled¶
- Type
boolean
- Default
False
Global toggle for TLS usage when comunicating with the caching servers.
- tls_cafile¶
- Type
string
- Default
<None>
Path to a file of concatenated CA certificates in PEM format necessary to establish the caching servers’ authenticity. If tls_enabled is False, this option is ignored.
- tls_certfile¶
- Type
string
- Default
<None>
Path to a single file in PEM format containing the client’s certificate as well as any number of CA certificates needed to establish the certificate’s authenticity. This file is only required when client side authentication is necessary. If tls_enabled is False, this option is ignored.
- tls_keyfile¶
- Type
string
- Default
<None>
Path to a single file containing the client’s private key in. Otherwise the private key will be taken from the file specified in tls_certfile. If tls_enabled is False, this option is ignored.
- tls_allowed_ciphers¶
- Type
string
- Default
<None>
Set the available ciphers for sockets created with the TLS context. It should be a string in the OpenSSL cipher list format. If not specified, all OpenSSL enabled ciphers will be available.
- enable_socket_keepalive¶
- Type
boolean
- Default
False
Global toggle for the socket keepalive of dogpile’s pymemcache backend
- socket_keepalive_idle¶
- Type
integer
- Default
1
- Minimum Value
0
The time (in seconds) the connection needs to remain idle before TCP starts sending keepalive probes. Should be a positive integer most greater than zero.
- socket_keepalive_interval¶
- Type
integer
- Default
1
- Minimum Value
0
The time (in seconds) between individual keepalive probes. Should be a positive integer greater than zero.
- socket_keepalive_count¶
- Type
integer
- Default
1
- Minimum Value
0
The maximum number of keepalive probes TCP should send before dropping the connection. Should be a positive integer greater than zero.
- enable_retry_client¶
- Type
boolean
- Default
False
Enable retry client mechanisms to handle failure. Those mechanisms can be used to wrap all kind of pymemcache clients. The wrapper allows you to define how many attempts to make and how long to wait between attemots.
- retry_attempts¶
- Type
integer
- Default
2
- Minimum Value
1
Number of times to attempt an action before failing.
- retry_delay¶
- Type
floating point
- Default
0
Number of seconds to sleep between each attempt.
- hashclient_retry_attempts¶
- Type
integer
- Default
2
- Minimum Value
1
Amount of times a client should be tried before it is marked dead and removed from the pool in the HashClient’s internal mechanisms.
- hashclient_retry_delay¶
- Type
floating point
- Default
1
Time in seconds that should pass between retry attempts in the HashClient’s internal mechanisms.
- dead_timeout¶
- Type
floating point
- Default
60
Time in seconds before attempting to add a node back in the pool in the HashClient’s internal mechanisms.
cors¶
- allowed_origin¶
- Type
list
- Default
<None>
Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com
- allow_credentials¶
- Type
boolean
- Default
True
Indicate that the actual request can include user credentials
- expose_headers¶
- Type
list
- Default
['X-Auth-Token', 'X-Subject-Token', 'X-Service-Token', 'X-OpenStack-Request-ID', 'OpenStack-Volume-microversion']
Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.
- max_age¶
- Type
integer
- Default
3600
Maximum cache age of CORS preflight requests.
- allow_methods¶
- Type
list
- Default
['GET', 'PUT', 'POST', 'DELETE', 'PATCH']
Indicate which methods can be used during the actual request.
- allow_headers¶
- Type
list
- Default
['X-Auth-Token', 'X-Identity-Status', 'X-Roles', 'X-Service-Catalog', 'X-User-Id', 'X-Tenant-Id', 'X-OpenStack-Request-ID']
Indicate which header field names may be used during the actual request.
database¶
- sqlite_synchronous¶
- Type
boolean
- Default
True
If True, SQLite uses synchronous mode.
¶ Group
Name
DEFAULT
sqlite_synchronous
- backend¶
- Type
string
- Default
sqlalchemy
The back end to use for the database.
¶ Group
Name
DEFAULT
db_backend
- connection¶
- Type
string
- Default
<None>
The SQLAlchemy connection string to use to connect to the database.
¶ Group
Name
DEFAULT
sql_connection
DATABASE
sql_connection
sql
connection
- slave_connection¶
- Type
string
- Default
<None>
The SQLAlchemy connection string to use to connect to the slave database.
- mysql_sql_mode¶
- Type
string
- Default
TRADITIONAL
The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=
- mysql_wsrep_sync_wait¶
- Type
integer
- Default
<None>
For Galera only, configure wsrep_sync_wait causality checks on new connections. Default is None, meaning don’t configure any setting.
- mysql_enable_ndb¶
- Type
boolean
- Default
False
If True, transparently enables support for handling MySQL Cluster (NDB).
Warning
This option is deprecated for removal since 12.1.0. Its value may be silently ignored in the future.
- Reason
Support for the MySQL NDB Cluster storage engine has been deprecated and will be removed in a future release.
- connection_recycle_time¶
- Type
integer
- Default
3600
Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.
- max_pool_size¶
- Type
integer
- Default
5
Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.
- max_retries¶
- Type
integer
- Default
10
Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.
¶ Group
Name
DEFAULT
sql_max_retries
DATABASE
sql_max_retries
- retry_interval¶
- Type
integer
- Default
10
Interval between retries of opening a SQL connection.
¶ Group
Name
DEFAULT
sql_retry_interval
DATABASE
reconnect_interval
- max_overflow¶
- Type
integer
- Default
50
If set, use this value for max_overflow with SQLAlchemy.
¶ Group
Name
DEFAULT
sql_max_overflow
DATABASE
sqlalchemy_max_overflow
- connection_debug¶
- Type
integer
- Default
0
- Minimum Value
0
- Maximum Value
100
Verbosity of SQL debugging information: 0=None, 100=Everything.
¶ Group
Name
DEFAULT
sql_connection_debug
- connection_trace¶
- Type
boolean
- Default
False
Add Python stack traces to SQL as comment strings.
¶ Group
Name
DEFAULT
sql_connection_trace
- pool_timeout¶
- Type
integer
- Default
<None>
If set, use this value for pool_timeout with SQLAlchemy.
¶ Group
Name
DATABASE
sqlalchemy_pool_timeout
- use_db_reconnect¶
- Type
boolean
- Default
False
Enable the experimental use of database reconnect on connection lost.
- db_retry_interval¶
- Type
integer
- Default
1
Seconds between retries of a database transaction.
- db_inc_retry_interval¶
- Type
boolean
- Default
True
If True, increases the interval between retries of a database operation up to db_max_retry_interval.
- db_max_retry_interval¶
- Type
integer
- Default
10
If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.
- db_max_retries¶
- Type
integer
- Default
20
Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.
- connection_parameters¶
- Type
string
- Default
''
Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1¶m2=value2&…
- engine¶
- Type
string
- Default
''
Database engine for which script will be generated when using offline migration.
designate¶
- auth_url¶
- Type
unknown type
- Default
<None>
Authentication URL
- auth_type¶
- Type
unknown type
- Default
<None>
Authentication type to load
¶ Group
Name
designate
auth_plugin
- cafile¶
- Type
string
- Default
<None>
PEM encoded Certificate Authority to use when verifying HTTPs connections.
- certfile¶
- Type
string
- Default
<None>
PEM encoded client certificate cert file
- collect_timing¶
- Type
boolean
- Default
False
Collect per-API call timing information.
- default_domain_id¶
- Type
unknown type
- Default
<None>
Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
- default_domain_name¶
- Type
unknown type
- Default
<None>
Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
- domain_id¶
- Type
unknown type
- Default
<None>
Domain ID to scope to
- domain_name¶
- Type
unknown type
- Default
<None>
Domain name to scope to
- insecure¶
- Type
boolean
- Default
False
Verify HTTPS connections.
- keyfile¶
- Type
string
- Default
<None>
PEM encoded client certificate key file
- password¶
- Type
unknown type
- Default
<None>
User’s password
- project_domain_id¶
- Type
unknown type
- Default
<None>
Domain ID containing project
- project_domain_name¶
- Type
unknown type
- Default
<None>
Domain name containing project
- project_id¶
- Type
unknown type
- Default
<None>
Project ID to scope to
¶ Group
Name
designate
tenant-id
designate
tenant_id
- project_name¶
- Type
unknown type
- Default
<None>
Project name to scope to
¶ Group
Name
designate
tenant-name
designate
tenant_name
- split_loggers¶
- Type
boolean
- Default
False
Log requests to multiple loggers.
- system_scope¶
- Type
unknown type
- Default
<None>
Scope for system operations
- tenant_id¶
- Type
unknown type
- Default
<None>
Tenant ID
- tenant_name¶
- Type
unknown type
- Default
<None>
Tenant Name
- timeout¶
- Type
integer
- Default
<None>
Timeout value for http requests
- trust_id¶
- Type
unknown type
- Default
<None>
ID of the trust to use as a trustee use
- user_domain_id¶
- Type
unknown type
- Default
<None>
User’s domain id
- user_domain_name¶
- Type
unknown type
- Default
<None>
User’s domain name
- user_id¶
- Type
unknown type
- Default
<None>
User id
- username¶
- Type
unknown type
- Default
<None>
Username
¶ Group
Name
designate
user-name
designate
user_name
- url¶
- Type
string
- Default
<None>
URL for connecting to designate
- admin_username¶
- Type
string
- Default
<None>
Username for connecting to designate in admin context
Warning
This option is deprecated for removal since Xena. Its value may be silently ignored in the future.
- Reason
This option will be completely replaced by keystoneauth parameters.
- admin_password¶
- Type
string
- Default
<None>
Password for connecting to designate in admin context
Warning
This option is deprecated for removal since Xena. Its value may be silently ignored in the future.
- Reason
This option will be completely replaced by keystoneauth parameters.
- admin_tenant_id¶
- Type
string
- Default
<None>
Tenant id for connecting to designate in admin context
Warning
This option is deprecated for removal since Xena. Its value may be silently ignored in the future.
- Reason
This option will be completely replaced by keystoneauth parameters.
- admin_tenant_name¶
- Type
string
- Default
<None>
Tenant name for connecting to designate in admin context
Warning
This option is deprecated for removal since Xena. Its value may be silently ignored in the future.
- Reason
This option will be completely replaced by keystoneauth parameters.
- admin_auth_url¶
- Type
string
- Default
<None>
Authorization URL for connecting to designate in admin context
Warning
This option is deprecated for removal since Xena. Its value may be silently ignored in the future.
- Reason
This option will be completely replaced by keystoneauth parameters.
- allow_reverse_dns_lookup¶
- Type
boolean
- Default
True
Allow the creation of PTR records
- ipv4_ptr_zone_prefix_size¶
- Type
integer
- Default
24
Number of bits in an ipv4 PTR zone that will be considered network prefix. It has to align to byte boundary. Minimum value is 8. Maximum value is 24. As a consequence, range of values is 8, 16 and 24
- ipv6_ptr_zone_prefix_size¶
- Type
integer
- Default
120
Number of bits in an ipv6 PTR zone that will be considered network prefix. It has to align to nyble boundary. Minimum value is 4. Maximum value is 124. As a consequence, range of values is 4, 8, 12, 16,…, 124
- ptr_zone_email¶
- Type
string
- Default
''
The email address to be used when creating PTR zones. If not specified, the email address will be admin@<dns_domain>
experimental¶
- linuxbridge¶
- Type
boolean
- Default
False
Enable execution of the experimental Linuxbridge agent.
healthcheck¶
- path¶
- Type
string
- Default
/healthcheck
The path to respond to healtcheck requests on.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- detailed¶
- Type
boolean
- Default
False
Show more detailed information as part of the response. Security note: Enabling this option may expose sensitive details about the service being monitored. Be sure to verify that it will not violate your security policies.
- backends¶
- Type
list
- Default
[]
Additional backends that can perform health checks and report that information back as part of a request.
- disable_by_file_path¶
- Type
string
- Default
<None>
Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin.
- disable_by_file_paths¶
- Type
list
- Default
[]
Check the presence of a file based on a port to determine if an application is running on a port. Expects a “port:path” list of strings. Used by DisableByFilesPortsHealthcheck plugin.
ironic¶
- auth_url¶
- Type
unknown type
- Default
<None>
Authentication URL
- auth_type¶
- Type
unknown type
- Default
<None>
Authentication type to load
¶ Group
Name
ironic
auth_plugin
- cafile¶
- Type
string
- Default
<None>
PEM encoded Certificate Authority to use when verifying HTTPs connections.
- certfile¶
- Type
string
- Default
<None>
PEM encoded client certificate cert file
- collect_timing¶
- Type
boolean
- Default
False
Collect per-API call timing information.
- default_domain_id¶
- Type
unknown type
- Default
<None>
Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
- default_domain_name¶
- Type
unknown type
- Default
<None>
Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
- domain_id¶
- Type
unknown type
- Default
<None>
Domain ID to scope to
- domain_name¶
- Type
unknown type
- Default
<None>
Domain name to scope to
- insecure¶
- Type
boolean
- Default
False
Verify HTTPS connections.
- keyfile¶
- Type
string
- Default
<None>
PEM encoded client certificate key file
- password¶
- Type
unknown type
- Default
<None>
User’s password
- project_domain_id¶
- Type
unknown type
- Default
<None>
Domain ID containing project
- project_domain_name¶
- Type
unknown type
- Default
<None>
Domain name containing project
- project_id¶
- Type
unknown type
- Default
<None>
Project ID to scope to
¶ Group
Name
ironic
tenant-id
ironic
tenant_id
- project_name¶
- Type
unknown type
- Default
<None>
Project name to scope to
¶ Group
Name
ironic
tenant-name
ironic
tenant_name
- split_loggers¶
- Type
boolean
- Default
False
Log requests to multiple loggers.
- system_scope¶
- Type
unknown type
- Default
<None>
Scope for system operations
- tenant_id¶
- Type
unknown type
- Default
<None>
Tenant ID
- tenant_name¶
- Type
unknown type
- Default
<None>
Tenant Name
- timeout¶
- Type
integer
- Default
<None>
Timeout value for http requests
- trust_id¶
- Type
unknown type
- Default
<None>
ID of the trust to use as a trustee use
- user_domain_id¶
- Type
unknown type
- Default
<None>
User’s domain id
- user_domain_name¶
- Type
unknown type
- Default
<None>
User’s domain name
- user_id¶
- Type
unknown type
- Default
<None>
User id
- enable_notifications¶
- Type
boolean
- Default
False
Send notification events to ironic. (For example on relevant port status changes.)
keystone_authtoken¶
- www_authenticate_uri¶
- Type
string
- Default
<None>
Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.
¶ Group
Name
keystone_authtoken
auth_uri
- auth_uri¶
- Type
string
- Default
<None>
Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.
Warning
This option is deprecated for removal since Queens. Its value may be silently ignored in the future.
- Reason
The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.
- auth_version¶
- Type
string
- Default
<None>
API version of the Identity API endpoint.
- interface¶
- Type
string
- Default
internal
Interface to use for the Identity API endpoint. Valid values are “public”, “internal” (default) or “admin”.
- delay_auth_decision¶
- Type
boolean
- Default
False
Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.
- http_connect_timeout¶
- Type
integer
- Default
<None>
Request timeout value for communicating with Identity API server.
- http_request_max_retries¶
- Type
integer
- Default
3
How many times are we trying to reconnect when communicating with Identity API Server.
- cache¶
- Type
string
- Default
<None>
Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the
memcached_servers
option instead.
- certfile¶
- Type
string
- Default
<None>
Required if identity server requires client certificate
- keyfile¶
- Type
string
- Default
<None>
Required if identity server requires client certificate
- cafile¶
- Type
string
- Default
<None>
A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.
- insecure¶
- Type
boolean
- Default
False
Verify HTTPS connections.
- region_name¶
- Type
string
- Default
<None>
The region in which the identity server can be found.
- memcached_servers¶
- Type
list
- Default
<None>
Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.
¶ Group
Name
keystone_authtoken
memcache_servers
- token_cache_time¶
- Type
integer
- Default
300
In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.
- memcache_security_strategy¶
- Type
string
- Default
None
- Valid Values
None, MAC, ENCRYPT
(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.
- memcache_secret_key¶
- Type
string
- Default
<None>
(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.
- memcache_pool_dead_retry¶
- Type
integer
- Default
300
(Optional) Number of seconds memcached server is considered dead before it is tried again.
- memcache_pool_maxsize¶
- Type
integer
- Default
10
(Optional) Maximum total number of open connections to every memcached server.
- memcache_pool_socket_timeout¶
- Type
integer
- Default
3
(Optional) Socket timeout in seconds for communicating with a memcached server.
- memcache_pool_unused_timeout¶
- Type
integer
- Default
60
(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.
- memcache_pool_conn_get_timeout¶
- Type
integer
- Default
10
(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.
- memcache_use_advanced_pool¶
- Type
boolean
- Default
True
(Optional) Use the advanced (eventlet safe) memcached client pool.
- include_service_catalog¶
- Type
boolean
- Default
True
(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.
- enforce_token_bind¶
- Type
string
- Default
permissive
Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.
- service_token_roles¶
- Type
list
- Default
['service']
A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.
- service_token_roles_required¶
- Type
boolean
- Default
False
For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.
- service_type¶
- Type
string
- Default
<None>
The name or type of the service as it appears in the service catalog. This is used to validate tokens that have restricted access rules.
- auth_type¶
- Type
unknown type
- Default
<None>
Authentication type to load
¶ Group
Name
keystone_authtoken
auth_plugin
- auth_section¶
- Type
unknown type
- Default
<None>
Config Section from which to load plugin specific options
nova¶
- region_name¶
- Type
string
- Default
<None>
Name of nova region to use. Useful if keystone manages more than one region.
- endpoint_type¶
- Type
string
- Default
public
- Valid Values
public, admin, internal
Type of the nova endpoint to use. This endpoint will be looked up in the keystone catalog and should be one of public, internal or admin.
- auth_url¶
- Type
unknown type
- Default
<None>
Authentication URL
- auth_type¶
- Type
unknown type
- Default
<None>
Authentication type to load
¶ Group
Name
nova
auth_plugin
- cafile¶
- Type
string
- Default
<None>
PEM encoded Certificate Authority to use when verifying HTTPs connections.
- certfile¶
- Type
string
- Default
<None>
PEM encoded client certificate cert file
- collect_timing¶
- Type
boolean
- Default
False
Collect per-API call timing information.
- default_domain_id¶
- Type
unknown type
- Default
<None>
Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
- default_domain_name¶
- Type
unknown type
- Default
<None>
Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
- domain_id¶
- Type
unknown type
- Default
<None>
Domain ID to scope to
- domain_name¶
- Type
unknown type
- Default
<None>
Domain name to scope to
- insecure¶
- Type
boolean
- Default
False
Verify HTTPS connections.
- keyfile¶
- Type
string
- Default
<None>
PEM encoded client certificate key file
- password¶
- Type
unknown type
- Default
<None>
User’s password
- project_domain_id¶
- Type
unknown type
- Default
<None>
Domain ID containing project
- project_domain_name¶
- Type
unknown type
- Default
<None>
Domain name containing project
- project_id¶
- Type
unknown type
- Default
<None>
Project ID to scope to
¶ Group
Name
nova
tenant-id
nova
tenant_id
- project_name¶
- Type
unknown type
- Default
<None>
Project name to scope to
¶ Group
Name
nova
tenant-name
nova
tenant_name
- split_loggers¶
- Type
boolean
- Default
False
Log requests to multiple loggers.
- system_scope¶
- Type
unknown type
- Default
<None>
Scope for system operations
- tenant_id¶
- Type
unknown type
- Default
<None>
Tenant ID
- tenant_name¶
- Type
unknown type
- Default
<None>
Tenant Name
- timeout¶
- Type
integer
- Default
<None>
Timeout value for http requests
- trust_id¶
- Type
unknown type
- Default
<None>
ID of the trust to use as a trustee use
- user_domain_id¶
- Type
unknown type
- Default
<None>
User’s domain id
- user_domain_name¶
- Type
unknown type
- Default
<None>
User’s domain name
- user_id¶
- Type
unknown type
- Default
<None>
User id
oslo_concurrency¶
- disable_process_locking¶
- Type
boolean
- Default
False
Enables or disables inter-process locks.
¶ Group
Name
DEFAULT
disable_process_locking
- lock_path¶
- Type
string
- Default
<None>
Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, a lock path must be set.
¶ Group
Name
DEFAULT
lock_path
oslo_messaging_amqp¶
- container_name¶
- Type
string
- Default
<None>
Name for the AMQP container. must be globally unique. Defaults to a generated UUID
¶ Group
Name
amqp1
container_name
- idle_timeout¶
- Type
integer
- Default
0
Timeout for inactive connections (in seconds)
¶ Group
Name
amqp1
idle_timeout
- ssl¶
- Type
boolean
- Default
False
Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.
- ssl_ca_file¶
- Type
string
- Default
''
CA certificate PEM file used to verify the server’s certificate
¶ Group
Name
amqp1
ssl_ca_file
- ssl_cert_file¶
- Type
string
- Default
''
Self-identifying certificate PEM file for client authentication
¶ Group
Name
amqp1
ssl_cert_file
- ssl_key_file¶
- Type
string
- Default
''
Private key PEM file used to sign ssl_cert_file certificate (optional)
¶ Group
Name
amqp1
ssl_key_file
- ssl_key_password¶
- Type
string
- Default
<None>
Password for decrypting ssl_key_file (if encrypted)
¶ Group
Name
amqp1
ssl_key_password
- ssl_verify_vhost¶
- Type
boolean
- Default
False
By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.
- sasl_mechanisms¶
- Type
string
- Default
''
Space separated list of acceptable SASL mechanisms
¶ Group
Name
amqp1
sasl_mechanisms
- sasl_config_dir¶
- Type
string
- Default
''
Path to directory that contains the SASL configuration
¶ Group
Name
amqp1
sasl_config_dir
- sasl_config_name¶
- Type
string
- Default
''
Name of configuration file (without .conf suffix)
¶ Group
Name
amqp1
sasl_config_name
- sasl_default_realm¶
- Type
string
- Default
''
SASL realm to use if no realm present in username
- connection_retry_interval¶
- Type
integer
- Default
1
- Minimum Value
1
Seconds to pause before attempting to re-connect.
- connection_retry_backoff¶
- Type
integer
- Default
2
- Minimum Value
0
Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.
- connection_retry_interval_max¶
- Type
integer
- Default
30
- Minimum Value
1
Maximum limit for connection_retry_interval + connection_retry_backoff
- link_retry_delay¶
- Type
integer
- Default
10
- Minimum Value
1
Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.
- default_reply_retry¶
- Type
integer
- Default
0
- Minimum Value
-1
The maximum number of attempts to re-send a reply message which failed due to a recoverable error.
- default_reply_timeout¶
- Type
integer
- Default
30
- Minimum Value
5
The deadline for an rpc reply message delivery.
- default_send_timeout¶
- Type
integer
- Default
30
- Minimum Value
5
The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.
- default_notify_timeout¶
- Type
integer
- Default
30
- Minimum Value
5
The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.
- default_sender_link_timeout¶
- Type
integer
- Default
600
- Minimum Value
1
The duration to schedule a purge of idle sender links. Detach link after expiry.
- addressing_mode¶
- Type
string
- Default
dynamic
Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing
- pseudo_vhost¶
- Type
boolean
- Default
True
Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.
- server_request_prefix¶
- Type
string
- Default
exclusive
address prefix used when sending to a specific server
¶ Group
Name
amqp1
server_request_prefix
- broadcast_prefix¶
- Type
string
- Default
broadcast
address prefix used when broadcasting to all servers
¶ Group
Name
amqp1
broadcast_prefix
- group_request_prefix¶
- Type
string
- Default
unicast
address prefix when sending to any server in group
¶ Group
Name
amqp1
group_request_prefix
- rpc_address_prefix¶
- Type
string
- Default
openstack.org/om/rpc
Address prefix for all generated RPC addresses
- notify_address_prefix¶
- Type
string
- Default
openstack.org/om/notify
Address prefix for all generated Notification addresses
- multicast_address¶
- Type
string
- Default
multicast
Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.
- unicast_address¶
- Type
string
- Default
unicast
Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.
- anycast_address¶
- Type
string
- Default
anycast
Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.
- default_notification_exchange¶
- Type
string
- Default
<None>
Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’
- default_rpc_exchange¶
- Type
string
- Default
<None>
Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’
- reply_link_credit¶
- Type
integer
- Default
200
- Minimum Value
1
Window size for incoming RPC Reply messages.
- rpc_server_credit¶
- Type
integer
- Default
100
- Minimum Value
1
Window size for incoming RPC Request messages
- notify_server_credit¶
- Type
integer
- Default
100
- Minimum Value
1
Window size for incoming Notification messages
- pre_settled¶
- Type
multi-valued
- Default
rpc-cast
- Default
rpc-reply
Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled
oslo_messaging_kafka¶
- kafka_max_fetch_bytes¶
- Type
integer
- Default
1048576
Max fetch bytes of Kafka consumer
- kafka_consumer_timeout¶
- Type
floating point
- Default
1.0
Default timeout(s) for Kafka consumers
- pool_size¶
- Type
integer
- Default
10
Pool Size for Kafka Consumers
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
Driver no longer uses connection pool.
- conn_pool_min_size¶
- Type
integer
- Default
2
The pool size limit for connections expiration policy
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
Driver no longer uses connection pool.
- conn_pool_ttl¶
- Type
integer
- Default
1200
The time-to-live in sec of idle connections in the pool
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
Driver no longer uses connection pool.
- consumer_group¶
- Type
string
- Default
oslo_messaging_consumer
Group id for Kafka consumer. Consumers in one group will coordinate message consumption
- producer_batch_timeout¶
- Type
floating point
- Default
0.0
Upper bound on the delay for KafkaProducer batching in seconds
- producer_batch_size¶
- Type
integer
- Default
16384
Size of batch for the producer async send
- compression_codec¶
- Type
string
- Default
none
- Valid Values
none, gzip, snappy, lz4, zstd
The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version
- enable_auto_commit¶
- Type
boolean
- Default
False
Enable asynchronous consumer commits
- max_poll_records¶
- Type
integer
- Default
500
The maximum number of records returned in a poll call
- security_protocol¶
- Type
string
- Default
PLAINTEXT
- Valid Values
PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL
Protocol used to communicate with brokers
- sasl_mechanism¶
- Type
string
- Default
PLAIN
Mechanism when security protocol is SASL
- ssl_cafile¶
- Type
string
- Default
''
CA certificate PEM file used to verify the server certificate
- ssl_client_cert_file¶
- Type
string
- Default
''
Client certificate PEM file used for authentication.
- ssl_client_key_file¶
- Type
string
- Default
''
Client key PEM file used for authentication.
- ssl_client_key_password¶
- Type
string
- Default
''
Client key password file used for authentication.
oslo_messaging_notifications¶
- driver¶
- Type
multi-valued
- Default
''
The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop
¶ Group
Name
DEFAULT
notification_driver
- transport_url¶
- Type
string
- Default
<None>
A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.
¶ Group
Name
DEFAULT
notification_transport_url
- topics¶
- Type
list
- Default
['notifications']
AMQP topic used for OpenStack notifications.
¶ Group
Name
rpc_notifier2
topics
DEFAULT
notification_topics
- retry¶
- Type
integer
- Default
-1
The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
oslo_messaging_rabbit¶
- amqp_durable_queues¶
- Type
boolean
- Default
False
Use durable queues in AMQP. If rabbit_quorum_queue is enabled, queues will be durable and this value will be ignored.
- amqp_auto_delete¶
- Type
boolean
- Default
False
Auto-delete queues in AMQP.
¶ Group
Name
DEFAULT
amqp_auto_delete
- ssl_version¶
- Type
string
- Default
''
SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.
¶ Group
Name
oslo_messaging_rabbit
kombu_ssl_version
- ssl_key_file¶
- Type
string
- Default
''
SSL key file (valid only if SSL enabled).
¶ Group
Name
oslo_messaging_rabbit
kombu_ssl_keyfile
- ssl_cert_file¶
- Type
string
- Default
''
SSL cert file (valid only if SSL enabled).
¶ Group
Name
oslo_messaging_rabbit
kombu_ssl_certfile
- ssl_ca_file¶
- Type
string
- Default
''
SSL certification authority file (valid only if SSL enabled).
¶ Group
Name
oslo_messaging_rabbit
kombu_ssl_ca_certs
- ssl_enforce_fips_mode¶
- Type
boolean
- Default
False
Global toggle for enforcing the OpenSSL FIPS mode. This feature requires Python support. This is available in Python 3.9 in all environments and may have been backported to older Python versions on select environments. If the Python executable used does not support OpenSSL FIPS mode, an exception will be raised.
- heartbeat_in_pthread¶
- Type
boolean
- Default
False
Run the health check heartbeat thread through a native python thread by default. If this option is equal to False then the health check heartbeat will inherit the execution model from the parent process. For example if the parent process has monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread. This option should be set to True only for the wsgi services.
- kombu_reconnect_delay¶
- Type
floating point
- Default
1.0
- Minimum Value
0.0
- Maximum Value
4.5
How long to wait (in seconds) before reconnecting in response to an AMQP consumer cancel notification.
¶ Group
Name
DEFAULT
kombu_reconnect_delay
- kombu_compression¶
- Type
string
- Default
<None>
EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.
- kombu_missing_consumer_retry_timeout¶
- Type
integer
- Default
60
How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.
¶ Group
Name
oslo_messaging_rabbit
kombu_reconnect_timeout
- kombu_failover_strategy¶
- Type
string
- Default
round-robin
- Valid Values
round-robin, shuffle
Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.
- rabbit_login_method¶
- Type
string
- Default
AMQPLAIN
- Valid Values
PLAIN, AMQPLAIN, EXTERNAL, RABBIT-CR-DEMO
The RabbitMQ login method.
¶ Group
Name
DEFAULT
rabbit_login_method
- rabbit_retry_interval¶
- Type
integer
- Default
1
How frequently to retry connecting with RabbitMQ.
- rabbit_retry_backoff¶
- Type
integer
- Default
2
How long to backoff for between retries when connecting to RabbitMQ.
¶ Group
Name
DEFAULT
rabbit_retry_backoff
- rabbit_interval_max¶
- Type
integer
- Default
30
Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
- rabbit_ha_queues¶
- Type
boolean
- Default
False
Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “
¶ Group
Name
DEFAULT
rabbit_ha_queues
- rabbit_quorum_queue¶
- Type
boolean
- Default
False
Use quorum queues in RabbitMQ (x-queue-type: quorum). The quorum queue is a modern queue type for RabbitMQ implementing a durable, replicated FIFO queue based on the Raft consensus algorithm. It is available as of RabbitMQ 3.8.0. If set this option will conflict with the HA queues (
rabbit_ha_queues
) aka mirrored queues, in other words the HA queues should be disabled, quorum queues durable by default so the amqp_durable_queues opion is ignored when this option enabled.
- rabbit_quorum_delivery_limit¶
- Type
integer
- Default
0
Each time a message is redelivered to a consumer, a counter is incremented. Once the redelivery count exceeds the delivery limit the message gets dropped or dead-lettered (if a DLX exchange has been configured) Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
- rabbit_quorum_max_memory_length¶
- Type
integer
- Default
0
By default all messages are maintained in memory if a quorum queue grows in length it can put memory pressure on a cluster. This option can limit the number of messages in the quorum queue. Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
¶ Group
Name
oslo_messaging_rabbit
rabbit_quroum_max_memory_length
- rabbit_quorum_max_memory_bytes¶
- Type
integer
- Default
0
By default all messages are maintained in memory if a quorum queue grows in length it can put memory pressure on a cluster. This option can limit the number of memory bytes used by the quorum queue. Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
¶ Group
Name
oslo_messaging_rabbit
rabbit_quroum_max_memory_bytes
- rabbit_transient_queues_ttl¶
- Type
integer
- Default
1800
- Minimum Value
1
Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.
- rabbit_qos_prefetch_count¶
- Type
integer
- Default
0
Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.
- heartbeat_timeout_threshold¶
- Type
integer
- Default
60
Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).
- heartbeat_rate¶
- Type
integer
- Default
2
How often times during the heartbeat_timeout_threshold we check the heartbeat.
- direct_mandatory_flag¶
- Type
boolean
- Default
True
(DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.MessageUndeliverable exception will be used to loop for a timeout to lets a chance to sender to recover.This flag is deprecated and it will not be possible to deactivate this functionality anymore
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
Mandatory flag no longer deactivable.
- enable_cancel_on_failover¶
- Type
boolean
- Default
False
Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and notify consumerswhen queue is down
oslo_middleware¶
- enable_proxy_headers_parsing¶
- Type
boolean
- Default
False
Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not.
oslo_policy¶
- enforce_scope¶
- Type
boolean
- Default
False
This option controls whether or not to enforce scope when evaluating policies. If
True
, the scope of the token used in the request is compared to thescope_types
of the policy being enforced. If the scopes do not match, anInvalidScope
exception will be raised. IfFalse
, a message will be logged informing operators that policies are being invoked with mismatching scope.
- enforce_new_defaults¶
- Type
boolean
- Default
False
This option controls whether or not to use old deprecated defaults when evaluating policies. If
True
, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with theenforce_scope
flag so that you can get the benefits of new defaults andscope_type
together. IfFalse
, the deprecated policy check string is logically OR’d with the new policy check string, allowing for a graceful upgrade experience between releases with new policies, which is the default behavior.
- policy_file¶
- Type
string
- Default
policy.yaml
The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.
¶ Group
Name
DEFAULT
policy_file
- policy_default_rule¶
- Type
string
- Default
default
Default rule. Enforced when a requested rule is not found.
¶ Group
Name
DEFAULT
policy_default_rule
- policy_dirs¶
- Type
multi-valued
- Default
policy.d
Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.
¶ Group
Name
DEFAULT
policy_dirs
- remote_content_type¶
- Type
string
- Default
application/x-www-form-urlencoded
- Valid Values
application/x-www-form-urlencoded, application/json
Content Type to send and receive data for REST based policy check
- remote_ssl_verify_server_crt¶
- Type
boolean
- Default
False
server identity verification for REST based policy check
- remote_ssl_ca_crt_file¶
- Type
string
- Default
<None>
Absolute path to ca cert file for REST based policy check
- remote_ssl_client_crt_file¶
- Type
string
- Default
<None>
Absolute path to client cert for REST based policy check
- remote_ssl_client_key_file¶
- Type
string
- Default
<None>
Absolute path client key file REST based policy check
oslo_reports¶
- log_dir¶
- Type
string
- Default
<None>
Path to a log directory where to create a file
- file_event_handler¶
- Type
string
- Default
<None>
The path to a file to watch for changes to trigger the reports, instead of signals. Setting this option disables the signal trigger for the reports. If application is running as a WSGI application it is recommended to use this instead of signals.
- file_event_handler_interval¶
- Type
integer
- Default
1
How many seconds to wait between polls when file_event_handler is set
placement¶
- region_name¶
- Type
string
- Default
<None>
Name of placement region to use. Useful if keystone manages more than one region.
- endpoint_type¶
- Type
string
- Default
public
- Valid Values
public, admin, internal
Type of the placement endpoint to use. This endpoint will be looked up in the keystone catalog and should be one of public, internal or admin.
- auth_url¶
- Type
unknown type
- Default
<None>
Authentication URL
- auth_type¶
- Type
unknown type
- Default
<None>
Authentication type to load
¶ Group
Name
placement
auth_plugin
- cafile¶
- Type
string
- Default
<None>
PEM encoded Certificate Authority to use when verifying HTTPs connections.
- certfile¶
- Type
string
- Default
<None>
PEM encoded client certificate cert file
- collect_timing¶
- Type
boolean
- Default
False
Collect per-API call timing information.
- default_domain_id¶
- Type
unknown type
- Default
<None>
Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
- default_domain_name¶
- Type
unknown type
- Default
<None>
Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
- domain_id¶
- Type
unknown type
- Default
<None>
Domain ID to scope to
- domain_name¶
- Type
unknown type
- Default
<None>
Domain name to scope to
- insecure¶
- Type
boolean
- Default
False
Verify HTTPS connections.
- keyfile¶
- Type
string
- Default
<None>
PEM encoded client certificate key file
- password¶
- Type
unknown type
- Default
<None>
User’s password
- project_domain_id¶
- Type
unknown type
- Default
<None>
Domain ID containing project
- project_domain_name¶
- Type
unknown type
- Default
<None>
Domain name containing project
- project_id¶
- Type
unknown type
- Default
<None>
Project ID to scope to
¶ Group
Name
placement
tenant-id
placement
tenant_id
- project_name¶
- Type
unknown type
- Default
<None>
Project name to scope to
¶ Group
Name
placement
tenant-name
placement
tenant_name
- split_loggers¶
- Type
boolean
- Default
False
Log requests to multiple loggers.
- system_scope¶
- Type
unknown type
- Default
<None>
Scope for system operations
- tenant_id¶
- Type
unknown type
- Default
<None>
Tenant ID
- tenant_name¶
- Type
unknown type
- Default
<None>
Tenant Name
- timeout¶
- Type
integer
- Default
<None>
Timeout value for http requests
- trust_id¶
- Type
unknown type
- Default
<None>
ID of the trust to use as a trustee use
- user_domain_id¶
- Type
unknown type
- Default
<None>
User’s domain id
- user_domain_name¶
- Type
unknown type
- Default
<None>
User’s domain name
- user_id¶
- Type
unknown type
- Default
<None>
User id
- username¶
- Type
unknown type
- Default
<None>
Username
¶ Group
Name
placement
user-name
placement
user_name
privsep¶
Configuration options for the oslo.privsep daemon. Note that this group name can be changed by the consuming service. Check the service’s docs to see if this is the case.
- user¶
- Type
string
- Default
<None>
User that the privsep daemon should run as.
- group¶
- Type
string
- Default
<None>
Group that the privsep daemon should run as.
- capabilities¶
- Type
unknown type
- Default
[]
List of Linux capabilities retained by the privsep daemon.
- thread_pool_size¶
- Type
integer
- Default
multiprocessing.cpu_count()
- Minimum Value
1
This option has a sample default set, which means that its actual default value may vary from the one documented above.
The number of threads available for privsep to concurrently run processes. Defaults to the number of CPU cores in the system.
- helper_command¶
- Type
string
- Default
<None>
Command to invoke to start the privsep daemon if not using the “fork” method. If not specified, a default is generated using “sudo privsep-helper” and arguments designed to recreate the current configuration. This command must accept suitable –privsep_context and –privsep_sock_path arguments.
- logger_name¶
- Type
string
- Default
oslo_privsep.daemon
Logger name to use for this privsep context. By default all contexts log with oslo_privsep.daemon.
profiler¶
- enabled¶
- Type
boolean
- Default
False
Enable the profiling for all services on this node.
Default value is False (fully disable the profiling feature).
Possible values:
True: Enables the feature
False: Disables the feature. The profiling cannot be started via this project operations. If the profiling is triggered by another project, this project part will be empty.
¶ Group
Name
profiler
profiler_enabled
- trace_sqlalchemy¶
- Type
boolean
- Default
False
Enable SQL requests profiling in services.
Default value is False (SQL requests won’t be traced).
Possible values:
True: Enables SQL requests profiling. Each SQL query will be part of the trace and can the be analyzed by how much time was spent for that.
False: Disables SQL requests profiling. The spent time is only shown on a higher level of operations. Single SQL queries cannot be analyzed this way.
- hmac_keys¶
- Type
string
- Default
SECRET_KEY
Secret key(s) to use for encrypting context data for performance profiling.
This string value should have the following format: <key1>[,<key2>,…<keyn>], where each key is some random string. A user who triggers the profiling via the REST API has to set one of these keys in the headers of the REST API call to include profiling results of this node for this particular project.
Both “enabled” flag and “hmac_keys” config options should be set to enable profiling. Also, to generate correct profiling information across all services at least one key needs to be consistent between OpenStack projects. This ensures it can be used from client side to generate the trace, containing information from all possible resources.
- connection_string¶
- Type
string
- Default
messaging://
Connection string for a notifier backend.
Default value is
messaging://
which sets the notifier to oslo_messaging.Examples of possible values:
messaging://
- use oslo_messaging driver for sending spans.redis://127.0.0.1:6379
- use redis driver for sending spans.mongodb://127.0.0.1:27017
- use mongodb driver for sending spans.elasticsearch://127.0.0.1:9200
- use elasticsearch driver for sending spans.jaeger://127.0.0.1:6831
- use jaeger tracing as driver for sending spans.
- es_doc_type¶
- Type
string
- Default
notification
Document type for notification indexing in elasticsearch.
- es_scroll_time¶
- Type
string
- Default
2m
This parameter is a time value parameter (for example: es_scroll_time=2m), indicating for how long the nodes that participate in the search will maintain relevant resources in order to continue and support it.
- es_scroll_size¶
- Type
integer
- Default
10000
Elasticsearch splits large requests in batches. This parameter defines maximum size of each batch (for example: es_scroll_size=10000).
- socket_timeout¶
- Type
floating point
- Default
0.1
Redissentinel provides a timeout option on the connections. This parameter defines that timeout (for example: socket_timeout=0.1).
- sentinel_service_name¶
- Type
string
- Default
mymaster
Redissentinel uses a service name to identify a master redis service. This parameter defines the name (for example:
sentinal_service_name=mymaster
).
- filter_error_trace¶
- Type
boolean
- Default
False
Enable filter traces that contain error/exception to a separated place.
Default value is set to False.
Possible values:
True: Enable filter traces that contain error/exception.
False: Disable the filter.
quotas¶
- default_quota¶
- Type
integer
- Default
-1
Default number of resource allowed per tenant. A negative value means unlimited.
- quota_network¶
- Type
integer
- Default
100
Number of networks allowed per tenant. A negative value means unlimited.
- quota_subnet¶
- Type
integer
- Default
100
Number of subnets allowed per tenant, A negative value means unlimited.
- quota_port¶
- Type
integer
- Default
500
Number of ports allowed per tenant. A negative value means unlimited.
- quota_driver¶
- Type
string
- Default
neutron.db.quota.driver_nolock.DbQuotaNoLockDriver
Default driver to use for quota checks.
- track_quota_usage¶
- Type
boolean
- Default
True
Keep in track in the database of current resource quota usage. Plugins which do not leverage the neutron database should set this flag to False.
- quota_router¶
- Type
integer
- Default
10
Number of routers allowed per tenant. A negative value means unlimited.
- quota_floatingip¶
- Type
integer
- Default
50
Number of floating IPs allowed per tenant. A negative value means unlimited.
- quota_security_group¶
- Type
integer
- Default
10
Number of security groups allowed per tenant. A negative value means unlimited.
- quota_security_group_rule¶
- Type
integer
- Default
100
Number of security rules allowed per tenant. A negative value means unlimited.
ssl¶
- ca_file¶
- Type
string
- Default
<None>
CA certificate file to use to verify connecting clients.
¶ Group
Name
DEFAULT
ssl_ca_file
- cert_file¶
- Type
string
- Default
<None>
Certificate file to use when starting the server securely.
¶ Group
Name
DEFAULT
ssl_cert_file
- key_file¶
- Type
string
- Default
<None>
Private key file to use when starting the server securely.
¶ Group
Name
DEFAULT
ssl_key_file
- version¶
- Type
string
- Default
<None>
SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.
- ciphers¶
- Type
string
- Default
<None>
Sets the list of available ciphers. value should be a string in the OpenSSL cipher list format.