ml2_conf.ini¶

DEFAULT¶

debug¶

Type:: boolean
Default:: False
Mutable:: This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append¶

Type:: string
Default:: <None>
Mutable:: This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

Deprecated Variations¶
Group	Name
DEFAULT	log-config
DEFAULT	log_config

log_date_format¶

Type:: string
Default:: %Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file¶

Type:: string
Default:: <None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations¶
Group	Name
DEFAULT	logfile

log_dir¶

Type:: string
Default:: <None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations¶
Group	Name
DEFAULT	logdir

watch_log_file¶

Type:: boolean
Default:: False

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog¶

Type:: boolean
Default:: False

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal¶

Type:: boolean
Default:: False

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility¶

Type:: string
Default:: LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json¶

Type:: boolean
Default:: False

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr¶

Type:: boolean
Default:: False

Log output to standard error. This option is ignored if log_config_append is set.

use_eventlog¶

Type:: boolean
Default:: False

Log output to Windows Event Log.

log_rotate_interval¶

Type:: integer
Default:: 1

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is set to “interval”.

log_rotate_interval_type¶

Type:: string
Default:: days
Valid Values:: Seconds, Minutes, Hours, Days, Weekday, Midnight

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

max_logfile_count¶

Type:: integer
Default:: 30

Maximum number of rotated log files.

max_logfile_size_mb¶

Type:: integer
Default:: 200

Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.

log_rotation_type¶

Type:: string
Default:: none
Valid Values:: interval, size, none

Log rotation type.

Possible values

interval: Rotate logs at predefined time intervals.
size: Rotate logs once they reach a predefined size.
none: Do not rotate log files.

logging_context_format_string¶

Type:: string
Default:: %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string¶

Type:: string
Default:: %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix¶

Type:: string
Default:: %(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix¶

Type:: string
Default:: %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format¶

Type:: string
Default:: %(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

default_log_levels¶

Type:: list
Default:: ['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors¶

Type:: boolean
Default:: False

Enables or disables publication of error events.

instance_format¶

Type:: string
Default:: "[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format¶

Type:: string
Default:: "[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval¶

Type:: integer
Default:: 0

Interval, number of seconds, of log rate limiting.

rate_limit_burst¶

Type:: integer
Default:: 0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level¶

Type:: string
Default:: CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations¶

Type:: boolean
Default:: False

Enables or disables fatal status of deprecations.

ml2¶

type_drivers¶

Type:: list
Default:: ['local', 'flat', 'vlan', 'gre', 'vxlan', 'geneve']

List of network type driver entrypoints to be loaded from the neutron.ml2.type_drivers namespace.

tenant_network_types¶

Type:: list
Default:: ['local']

Ordered list of network_types to allocate as tenant networks. The default value ‘local’ is useful for single-box testing but provides no connectivity between hosts.

mechanism_drivers¶

Type:: list
Default:: []

An ordered list of networking mechanism driver entrypoints to be loaded from the neutron.ml2.mechanism_drivers namespace.

extension_drivers¶

Type:: list
Default:: []

An ordered list of extension driver entrypoints to be loaded from the neutron.ml2.extension_drivers namespace. For example: extension_drivers = port_security,qos

path_mtu¶

Type:: integer
Default:: 0

Maximum size of an IP packet (MTU) that can traverse the underlying physical network infrastructure without fragmentation when using an overlay/tunnel protocol. This option allows specifying a physical network MTU value that differs from the default global_physnet_mtu value.

physical_network_mtus¶

Type:: list
Default:: []

A list of mappings of physical networks to MTU values. The format of the mapping is <physnet>:<mtu val>. This mapping allows specifying a physical network MTU value that differs from the default global_physnet_mtu value.

external_network_type¶

Type:: string
Default:: <None>

Default network type for external networks when no provider attributes are specified. By default it is None, which means that if provider attributes are not specified while creating external networks then they will have the same type as tenant networks. Allowed values for external_network_type config option depend on the network type values configured in type_drivers config option.

overlay_ip_version¶

Type:: integer
Default:: 4

IP version of all overlay (tunnel) network endpoints. Use a value of 4 for IPv4 or 6 for IPv6.

tunnelled_network_rp_name¶

Type:: string
Default:: rp_tunnelled

Resource provider name for the host with tunnelled networks. This resource provider represents the available bandwidth for all tunnelled networks in a compute node. NOTE: this parameter is used both by the Neutron server and the mechanism driver agents; it is recommended not to change it once any resource provider register has been created.

ml2_type_flat¶

flat_networks¶

Type:: list
Default:: *

List of physical_network names with which flat networks can be created. Use default ‘*’ to allow flat networks with arbitrary physical_network names. Use an empty list to disable flat networks.

ml2_type_geneve¶

vni_ranges¶

Type:: list
Default:: []

Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of Geneve VNI IDs that are available for tenant network allocation. Note OVN does not use the actual values.

max_header_size¶

Type:: integer
Default:: 30

The maximum allowed Geneve encapsulation header size (in bytes). Geneve header is extensible, this value is used to calculate the maximum MTU for Geneve-based networks. The default is 30, which is the size of the Geneve header without any additional option headers. Note the default is not enough for OVN which requires at least 38.

ml2_type_gre¶

tunnel_id_ranges¶

Type:: list
Default:: []

Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation

ml2_type_vlan¶

network_vlan_ranges¶

Type:: list
Default:: []

List of <physical_network>:<vlan_min>:<vlan_max> or <physical_network> specifying physical_network names usable for VLAN provider and tenant networks, as well as ranges of VLAN tags on each available for allocation to tenant networks. If no range is defined, the whole valid VLAN ID set [1, 4094] will be assigned.

ml2_type_vxlan¶

vni_ranges¶

Type:: list
Default:: []

Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of VXLAN VNI IDs that are available for tenant network allocation

vxlan_group¶

Type:: string
Default:: <None>

Multicast group for VXLAN. When configured, will enable sending all broadcast traffic to this multicast group. When left unconfigured, will disable multicast VXLAN mode.

ovs_driver¶

vnic_type_prohibit_list¶

Type:: list
Default:: []

Comma-separated list of VNIC types for which support is administratively prohibited by the mechanism driver. Please note that the supported vnic_types depend on your network interface card, on the kernel version of your operating system, and on other factors, like OVS version. In case of ovs mechanism driver the valid vnic types are normal and direct. Note that direct is supported only from kernel 4.8, and from ovs 2.8.0. Bind DIRECT (SR-IOV) port allows to offload the OVS flows using tc to the SR-IOV NIC. This allows to support hardware offload via tc and that allows us to manage the VF by OpenFlow control plane using representor net-device.

Deprecated Variations¶
Group	Name
ovs_driver	vnic_type_blacklist

securitygroup¶

firewall_driver¶

Type:: string
Default:: <None>

Driver for security groups firewall in the L2 agent

enable_security_group¶

Type:: boolean
Default:: True

Controls whether the neutron security group API is enabled in the server. It should be false when using no security groups or using the Nova security group API.

enable_ipset¶

Type:: boolean
Default:: True

Use IPsets to speed-up the iptables based security groups. Enabling IPset support requires that ipset is installed on the L2 agent node.

permitted_ethertypes¶

Type:: list
Default:: []

Comma-separated list of ethertypes to be permitted, in hexadecimal (starting with “0x”). For example, “0x4008” to permit InfiniBand.

sriov_driver¶