[DEFAULT] # # From oslo.log # # If set to true, the logging level will be set to DEBUG instead of the default # INFO level. (boolean value) # Note: This option can be changed without restarting. #debug = false # The name of a logging configuration file. This file is appended to any # existing logging configuration files. For details about logging configuration # files, see the Python logging module documentation. Note that when logging # configuration files are used then all logging configuration is set in the # configuration file and other logging configuration options are ignored (for # example, logging_context_format_string). (string value) # Note: This option can be changed without restarting. # Deprecated group/name - [DEFAULT]/log_config #log_config_append = # Defines the format string for %%(asctime)s in log records. Default: # %(default)s . This option is ignored if log_config_append is set. (string # value) #log_date_format = %Y-%m-%d %H:%M:%S # (Optional) Name of log file to send logging output to. If no default is set, # logging will go to stderr as defined by use_stderr. This option is ignored if # log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logfile #log_file = # (Optional) The base directory used for relative log_file paths. This option # is ignored if log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logdir #log_dir = # Uses logging handler designed to watch file system. When log file is moved or # removed this handler will open a new log file with specified path # instantaneously. It makes sense only if log_file option is specified and # Linux platform is used. This option is ignored if log_config_append is set. # (boolean value) #watch_log_file = false # Use syslog for logging. Existing syslog format is DEPRECATED and will be # changed later to honor RFC5424. This option is ignored if log_config_append # is set. (boolean value) #use_syslog = false # Enable journald for logging. If running in a systemd environment you may wish # to enable journal support. Doing so will use the journal native protocol # which includes structured metadata in addition to log messages.This option is # ignored if log_config_append is set. (boolean value) #use_journal = false # Syslog facility to receive log lines. This option is ignored if # log_config_append is set. (string value) #syslog_log_facility = LOG_USER # Use JSON formatting for logging. This option is ignored if log_config_append # is set. (boolean value) #use_json = false # Log output to standard error. This option is ignored if log_config_append is # set. (boolean value) #use_stderr = false # Format string to use for log messages with context. (string value) #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s # Format string to use for log messages when context is undefined. (string # value) #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s # Additional data to append to log message when logging level for the message # is DEBUG. (string value) #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d # Prefix each line of exception output with this format. (string value) #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s # Defines the format string for %(user_identity)s that is used in # logging_context_format_string. (string value) #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s # List of package logging levels in logger=LEVEL pairs. This option is ignored # if log_config_append is set. (list value) #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO # Enables or disables publication of error events. (boolean value) #publish_errors = false # The format for an instance that is passed with the log message. (string # value) #instance_format = "[instance: %(uuid)s] " # The format for an instance UUID that is passed with the log message. (string # value) #instance_uuid_format = "[instance: %(uuid)s] " # Interval, number of seconds, of log rate limiting. (integer value) #rate_limit_interval = 0 # Maximum number of logged messages per rate_limit_interval. (integer value) #rate_limit_burst = 0 # Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG # or empty string. Logs with level greater or equal to rate_limit_except_level # are not filtered. An empty string means that all levels are filtered. (string # value) #rate_limit_except_level = CRITICAL # Enables or disables fatal status of deprecations. (boolean value) #fatal_deprecations = false [agent] # # From neutron.ml2.ovs.agent # # Minimize polling by monitoring ovsdb for interface changes. (boolean value) #minimize_polling = true # The number of seconds to wait before respawning the ovsdb monitor after # losing communication with it. (integer value) #ovsdb_monitor_respawn_interval = 30 # Network types supported by the agent (gre, vxlan and/or geneve). (list value) #tunnel_types = # The UDP port to use for VXLAN tunnels. (port value) # Minimum value: 0 # Maximum value: 65535 #vxlan_udp_port = 4789 # MTU size of veth interfaces (integer value) #veth_mtu = 9000 # Use ML2 l2population mechanism driver to learn remote MAC and IPs and improve # tunnel scalability. (boolean value) #l2_population = false # Enable local ARP responder if it is supported. Requires OVS 2.1 and ML2 # l2population driver. Allows the switch (when supporting an overlay) to # respond to an ARP request locally without performing a costly ARP broadcast # into the overlay. (boolean value) #arp_responder = false # Set or un-set the don't fragment (DF) bit on outgoing IP packet carrying # GRE/VXLAN tunnel. (boolean value) #dont_fragment = true # Make the l2 agent run in DVR mode. (boolean value) #enable_distributed_routing = false # Reset flow table on start. Setting this to True will cause brief traffic # interruption. (boolean value) #drop_flows_on_start = false # Set or un-set the tunnel header checksum on outgoing IP packet carrying # GRE/VXLAN tunnel. (boolean value) #tunnel_csum = false # DEPRECATED: Selects the Agent Type reported (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #agent_type = Open vSwitch agent # When set to True, the accepted egress unicast traffic will not use action # NORMAL. The accepted egress packets will be taken care of in the final egress # tables direct output flows for unicast traffic. (boolean value) #explicitly_egress_direct = false # Extensions list to use (list value) #extensions = [network_log] # # From neutron.ml2.ovs.agent # # Maximum packets logging per second. (integer value) # Minimum value: 100 #rate_limit = 100 # Maximum number of packets per rate_limit. (integer value) # Minimum value: 25 #burst_limit = 25 # Output logfile path on agent side, default syslog file. (string value) #local_output_log_base = [ovs] # # From neutron.ml2.ovs.agent # # Integration bridge to use. Do not change this parameter unless you have a # good reason to. This is the name of the OVS integration bridge. There is one # per hypervisor. The integration bridge acts as a virtual 'patch bay'. All VM # VIFs are attached to this bridge and then 'patched' according to their # network connectivity. (string value) #integration_bridge = br-int # Tunnel bridge to use. (string value) #tunnel_bridge = br-tun # Peer patch port in integration bridge for tunnel bridge. (string value) #int_peer_patch_port = patch-tun # Peer patch port in tunnel bridge for integration bridge. (string value) #tun_peer_patch_port = patch-int # IP address of local overlay (tunnel) network endpoint. Use either an IPv4 or # IPv6 address that resides on one of the host network interfaces. The IP # version of this value must match the value of the 'overlay_ip_version' option # in the ML2 plug-in configuration file on the neutron server node(s). (IP # address value) #local_ip = # Comma-separated list of : tuples mapping physical # network names to the agent's node-specific Open vSwitch bridge names to be # used for flat and VLAN networks. The length of bridge names should be no more # than 11. Each bridge must exist, and should have a physical network interface # configured as a port. All physical networks configured on the server should # have mappings to appropriate bridges on each agent. Note: If you remove a # bridge from this mapping, make sure to disconnect it from the integration # bridge as it won't be managed by the agent anymore. (list value) #bridge_mappings = # Use veths instead of patch ports to interconnect the integration bridge to # physical networks. Support kernel without Open vSwitch patch port support so # long as it is set to True. (boolean value) #use_veth_interconnection = false # DEPRECATED: OpenFlow interface to use. (string value) # Possible values: # ovs-ofctl - # native - # This option is deprecated for removal. # Its value may be silently ignored in the future. #of_interface = native # OVS datapath to use. 'system' is the default value and corresponds to the # kernel datapath. To enable the userspace datapath set this value to 'netdev'. # (string value) # Possible values: # system - # netdev - #datapath_type = system # OVS vhost-user socket directory. (string value) #vhostuser_socket_dir = /var/run/openvswitch # Address to listen on for OpenFlow connections. Used only for 'native' driver. # (IP address value) #of_listen_address = 127.0.0.1 # Port to listen on for OpenFlow connections. Used only for 'native' driver. # (port value) # Minimum value: 0 # Maximum value: 65535 #of_listen_port = 6633 # Timeout in seconds to wait for the local switch connecting the controller. # Used only for 'native' driver. (integer value) #of_connect_timeout = 300 # Timeout in seconds to wait for a single OpenFlow request. Used only for # 'native' driver. (integer value) #of_request_timeout = 300 # The inactivity_probe interval in seconds for the local switch connection to # the controller. A value of 0 disables inactivity probes. Used only for # 'native' driver. (integer value) #of_inactivity_probe = 10 # DEPRECATED: The interface for interacting with the OVSDB (string value) # Possible values: # vsctl - # native - # This option is deprecated for removal. # Its value may be silently ignored in the future. #ovsdb_interface = native # The connection string for the OVSDB backend. Will be used by ovsdb-client # when monitoring and used for the all ovsdb commands when native # ovsdb_interface is enabled (string value) #ovsdb_connection = tcp:127.0.0.1:6640 # The SSL private key file to use when interacting with OVSDB. Required when # using an "ssl:" prefixed ovsdb_connection (string value) #ssl_key_file = # The SSL certificate file to use when interacting with OVSDB. Required when # using an "ssl:" prefixed ovsdb_connection (string value) #ssl_cert_file = # The Certificate Authority (CA) certificate to use when interacting with # OVSDB. Required when using an "ssl:" prefixed ovsdb_connection (string # value) #ssl_ca_cert_file = # Enable OVSDB debug logs (boolean value) #ovsdb_debug = false [securitygroup] # # From neutron.ml2.ovs.agent # # Driver for security groups firewall in the L2 agent (string value) #firewall_driver = # Controls whether the neutron security group API is enabled in the server. It # should be false when using no security groups or using the nova security # group API. (boolean value) #enable_security_group = true # Use ipset to speed-up the iptables based security groups. Enabling ipset # support requires that ipset is installed on L2 agent node. (boolean value) #enable_ipset = true # Comma-separated list of ethertypes to be permitted, in hexadecimal (starting # with "0x"). For example, "0x4008" to permit InfiniBand. (list value) #permitted_ethertypes = [xenapi] # # From neutron.ml2.xenapi # # URL for connection to XenServer/Xen Cloud Platform. (string value) #connection_url = # Username for connection to XenServer/Xen Cloud Platform. (string value) #connection_username = # Password for connection to XenServer/Xen Cloud Platform. (string value) #connection_password =