Distributed Virtual Routing with VRRP

Open vSwitch: High availability using DVR supports augmentation using Virtual Router Redundancy Protocol (VRRP). Using this configuration, virtual routers support both the --distributed and --ha options.

Similar to legacy HA routers, DVR/SNAT HA routers provide a quick fail over of the SNAT service to a backup DVR/SNAT router on an l3-agent running on a different node.

SNAT high availability is implemented in a manner similar to the Linux bridge: High availability using VRRP and Open vSwitch: High availability using VRRP examples where keepalived uses VRRP to provide quick failover of SNAT services.

During normal operation, the primary router periodically transmits heartbeat packets over a hidden project network that connects all HA routers for a particular project.

If the DVR/SNAT backup router stops receiving these packets, it assumes failure of the primary DVR/SNAT router and promotes itself to primary router by configuring IP addresses on the interfaces in the snat namespace. In environments with more than one backup router, the rules of VRRP are followed to select a new primary router.

Warning

There is a known bug with keepalived v1.2.15 and earlier which can cause packet loss when max_l3_agents_per_router is set to 3 or more. Therefore, we recommend that you upgrade to keepalived v1.2.16 or greater when using this feature.

Configuration example

The basic deployment model consists of one controller node, two or more network nodes, and multiple computes nodes.

Controller node configuration

  1. Add the following to /etc/neutron/neutron.conf:

    [DEFAULT]
    core_plugin = ml2
    service_plugins = router
    router_distributed = True
    l3_ha = True
    l3_ha_net_cidr = 169.254.192.0/18
    max_l3_agents_per_router = 3
    

    When the router_distributed = True flag is configured, routers created by all users are distributed. Without it, only privileged users can create distributed routers by using --distributed True.

    Similarly, when the l3_ha = True flag is configured, routers created by all users default to HA.

    It follows that with these two flags set to True in the configuration file, routers created by all users will default to distributed HA routers (DVR HA).

    The same can explicitly be accomplished by a user with administrative credentials setting the flags in the openstack router create command:

    $ openstack router create name-of-router --distributed --ha
    

    Note

    The max_l3_agents_per_router determine the number of backup DVR/SNAT routers which will be instantiated.

  2. Add the following to /etc/neutron/plugins/ml2/ml2_conf.ini:

    [ml2]
    type_drivers = flat,vxlan
    tenant_network_types = vxlan
    mechanism_drivers = openvswitch,l2population
    extension_drivers = port_security
    
    [ml2_type_flat]
    flat_networks = external
    
    [ml2_type_vxlan]
    vni_ranges = MIN_VXLAN_ID:MAX_VXLAN_ID
    

    Replace MIN_VXLAN_ID and MAX_VXLAN_ID with VXLAN ID minimum and maximum values suitable for your environment.

    Note

    The first value in the tenant_network_types option becomes the default project network type when a regular user creates a network.

Network nodes

  1. Configure the Open vSwitch agent. Add the following to /etc/neutron/plugins/ml2/openvswitch_agent.ini:

    [ovs]
    local_ip = TUNNEL_INTERFACE_IP_ADDRESS
    bridge_mappings = external:br-ex
    
    [agent]
    enable_distributed_routing = True
    tunnel_types = vxlan
    l2_population = True
    

    Replace TUNNEL_INTERFACE_IP_ADDRESS with the IP address of the interface that handles VXLAN project networks.

  2. Configure the L3 agent. Add the following to /etc/neutron/l3_agent.ini:

    [DEFAULT]
    ha_vrrp_auth_password = password
    interface_driver = openvswitch
    agent_mode = dvr_snat
    

Compute nodes

  1. Configure the Open vSwitch agent. Add the following to /etc/neutron/plugins/ml2/openvswitch_agent.ini:

    [ovs]
    local_ip = TUNNEL_INTERFACE_IP_ADDRESS
    bridge_mappings = external:br-ex
    
    [agent]
    enable_distributed_routing = True
    tunnel_types = vxlan
    l2_population = True
    
    [securitygroup]
    firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
    
  2. Configure the L3 agent. Add the following to /etc/neutron/l3_agent.ini:

    [DEFAULT]
    interface_driver = openvswitch
    agent_mode = dvr
    

    Replace TUNNEL_INTERFACE_IP_ADDRESS with the IP address of the interface that handles VXLAN project networks.

Keepalived VRRP health check

The health of your keepalived instances can be automatically monitored via a bash script that verifies connectivity to all available and configured gateway addresses. In the event that connectivity is lost, the master router is rescheduled to another node.

If all routers lose connectivity simultaneously, the process of selecting a new master router will be repeated in a round-robin fashion until one or more routers have their connectivity restored.

To enable this feature, edit the l3_agent.ini file:

ha_vrrp_health_check_interval = 30

Where ha_vrrp_health_check_interval indicates how often in seconds the health check should run. The default value is 0, which indicates that the check should not run at all.

Known limitations

  • There are certain scenarios where l2pop and distributed HA routers do not interact in an expected manner. These situations are the same that affect HA only routers and l2pop.