Octavia Amphora Failover Circuit Breaker

During a large infrastructure outage, the automatic failover of stale amphorae can lead to a mass failover event and create a considerable amount of extra load on servers. By using the amphora failover circuit breaker feature, you can avoid these unwanted failover events. The circuit breaker is a configurable threshold value that you can set, and will stop amphorae from automatically failing over whenever that threshold value is met. The circuit breaker feature is disabled by default.

Configuration

You define the threshold value for the failover circuit breaker feature by setting the failover_threshold variable. The failover_threshold variable is a member of the health_manager group within the configuration file /etc/octavia/octavia.conf.

Whenever the number of stale amphorae reaches or surpasses the value of failover_threshold, Octavia performs the following actions:

  • stops automatic failovers of amphorae.

  • sets the status of the stale amphorae to FAILOVER_STOPPED.

  • logs an error message.

The line below shows a typical error message:

ERROR octavia.db.repositories [-] Stale amphora count reached the threshold (3). 4 amphorae were set into FAILOVER_STOPPED status.

Note

Base the value that you set for failover_threshold on the size of your environment. We recommend that you set the value to a number greater than the typical number of amphorae that you estimate to run on a single host, or to a value that reflects between 20% and 30% of the total number of amphorae.

Error Recovery

Automatic Error Recovery

For amphorae whose status is FAILOVER_STOPPED, Octavia will automatically reset their status to ALLOCATED after receiving new updates from these amphorae.

Manual Error Recovery

To recover from the FAILOVER_STOPPED condition, you must manually reduce the value of the stale amphorae below the circuit breaker threshold.

You can use the openstack loadbalancer amphora list command to list the amphorae that are in FAILOVER_STOPPED state. Use the openstack loadbalancer amphora failover command to manually trigger the amphora to failover.

In this example, failover_threshold = 3 and an infrastructure outage caused four amphorae to become unavailable. After the health manager process detects this state, it sets the status of all stale amphorae to FAILOVER_STOPPED as shown below.

openstack loadbalancer amphora list
+--------------------------------------+--------------------------------------+------------------+--------+---------------+------------+
| id                                   | loadbalancer_id                      | status           | role   | lb_network_ip | ha_ip      |
+--------------------------------------+--------------------------------------+------------------+--------+---------------+------------+
| 79f0e06d-446d-448a-9d2b-c3b89d0c700d | 8fd2cac5-cbca-4bb1-bcfc-daba43e097ab | FAILOVER_STOPPED | BACKUP | 192.168.0.108 | 192.0.2.17 |
| 9c0416d7-6293-4f13-8f67-61e5d757b36e | 4b13dda1-296a-400c-8248-1abad5728057 | ALLOCATED        | MASTER | 192.168.0.198 | 192.0.2.42 |
| e11208b7-f13d-4db3-9ded-1ee6f70a0502 | 8fd2cac5-cbca-4bb1-bcfc-daba43e097ab | FAILOVER_STOPPED | MASTER | 192.168.0.154 | 192.0.2.17 |
| ceea9fff-71a2-48c8-a968-e51dc440c572 | ab513cb3-8f5d-461e-b7ae-a06b5083a371 | ALLOCATED        | MASTER | 192.168.0.149 | 192.0.2.26 |
| a1351933-2270-493c-8201-d8f9f9fe42f7 | 4b13dda1-296a-400c-8248-1abad5728057 | FAILOVER_STOPPED | BACKUP | 192.168.0.103 | 192.0.2.42 |
| 441718e7-0956-436b-9f99-9a476339d7d2 | ab513cb3-8f5d-461e-b7ae-a06b5083a371 | FAILOVER_STOPPED | BACKUP | 192.168.0.148 | 192.0.2.26 |
+--------------------------------------+--------------------------------------+------------------+--------+---------------+------------+

After operators have resolved the infrastructure outage, they might need to manually trigger failovers to return to normal operation. In this example, two manual failovers are necessary to get the number of stale amphorae below the configured threshold of three:

openstack loadbalancer amphora failover --wait 79f0e06d-446d-448a-9d2b-c3b89d0c700d
openstack loadbalancer amphora list
+--------------------------------------+--------------------------------------+------------------+--------+---------------+------------+
| id                                   | loadbalancer_id                      | status           | role   | lb_network_ip | ha_ip      |
+--------------------------------------+--------------------------------------+------------------+--------+---------------+------------+
| 9c0416d7-6293-4f13-8f67-61e5d757b36e | 4b13dda1-296a-400c-8248-1abad5728057 | ALLOCATED        | MASTER | 192.168.0.198 | 192.0.2.42 |
| e11208b7-f13d-4db3-9ded-1ee6f70a0502 | 8fd2cac5-cbca-4bb1-bcfc-daba43e097ab | FAILOVER_STOPPED | MASTER | 192.168.0.154 | 192.0.2.17 |
| ceea9fff-71a2-48c8-a968-e51dc440c572 | ab513cb3-8f5d-461e-b7ae-a06b5083a371 | ALLOCATED        | MASTER | 192.168.0.149 | 192.0.2.26 |
| a1351933-2270-493c-8201-d8f9f9fe42f7 | 4b13dda1-296a-400c-8248-1abad5728057 | FAILOVER_STOPPED | BACKUP | 192.168.0.103 | 192.0.2.42 |
| 441718e7-0956-436b-9f99-9a476339d7d2 | ab513cb3-8f5d-461e-b7ae-a06b5083a371 | FAILOVER_STOPPED | BACKUP | 192.168.0.148 | 192.0.2.26 |
| cf734b57-6019-4ec0-8437-115f76d1bbb0 | 8fd2cac5-cbca-4bb1-bcfc-daba43e097ab | ALLOCATED        | BACKUP | 192.168.0.141 | 192.0.2.17 |
+--------------------------------------+--------------------------------------+------------------+--------+---------------+------------+
openstack loadbalancer amphora failover --wait e11208b7-f13d-4db3-9ded-1ee6f70a0502
openstack loadbalancer amphora list
+--------------------------------------+--------------------------------------+-----------+--------+---------------+------------+
| id                                   | loadbalancer_id                      | status    | role   | lb_network_ip | ha_ip      |
+--------------------------------------+--------------------------------------+-----------+--------+---------------+------------+
| 9c0416d7-6293-4f13-8f67-61e5d757b36e | 4b13dda1-296a-400c-8248-1abad5728057 | ALLOCATED | MASTER | 192.168.0.198 | 192.0.2.42 |
| ceea9fff-71a2-48c8-a968-e51dc440c572 | ab513cb3-8f5d-461e-b7ae-a06b5083a371 | ALLOCATED | MASTER | 192.168.0.149 | 192.0.2.26 |
| cf734b57-6019-4ec0-8437-115f76d1bbb0 | 8fd2cac5-cbca-4bb1-bcfc-daba43e097ab | ALLOCATED | BACKUP | 192.168.0.141 | 192.0.2.17 |
| d2909051-402e-4e75-86c9-ec6725c814a1 | 8fd2cac5-cbca-4bb1-bcfc-daba43e097ab | ALLOCATED | MASTER | 192.168.0.25  | 192.0.2.17 |
| 5133e01a-fb53-457b-b810-edbb5202437e | 4b13dda1-296a-400c-8248-1abad5728057 | ALLOCATED | BACKUP | 192.168.0.76  | 192.0.2.42 |
| f82eff89-e326-4e9d-86bc-58c720220a3f | ab513cb3-8f5d-461e-b7ae-a06b5083a371 | ALLOCATED | BACKUP | 192.168.0.86  | 192.0.2.26 |
+--------------------------------------+--------------------------------------+-----------+--------+---------------+------------+

After the number of stale amphorae falls below the configured threshold value, normal operation resumes and the automatic failover process attempts to restore the remaining stale amphorae.