Install and configure for Ubuntu

This section describes how to install and configure the Load-balancer service for Ubuntu 18.04 (LTS).

Prerequisites

Before you install and configure the service, you must create a database, service credentials, and API endpoints.

  1. Create the database, complete these steps:

    • Use the database access client to connect to the database server as the root user:

      # mysql
      
    • Create the octavia database:

      CREATE DATABASE octavia;
      
    • Grant proper access to the octavia database:

      GRANT ALL PRIVILEGES ON octavia.* TO 'octavia'@'localhost' \
      IDENTIFIED BY 'OCTAVIA_DBPASS';
      GRANT ALL PRIVILEGES ON octavia.* TO 'octavia'@'%' \
      IDENTIFIED BY 'OCTAVIA_DBPASS';
      

      Replace OCTAVIA_DBPASS with a suitable password.

    • Exit the database access client.

      exit;
      
  2. Source the admin credentials to gain access to admin-only CLI commands:

    $ . admin-openrc
    
  3. To create the Octavia service credentials, complete these steps:

    • Create the octavia user:

      $ openstack user create --domain default --password-prompt octavia
        User Password:
        Repeat User Password:
        +---------------------+----------------------------------+
        | Field               | Value                            |
        +---------------------+----------------------------------+
        | domain_id           | default                          |
        | enabled             | True                             |
        | id                  | b18ee38e06034b748141beda8fc8bfad |
        | name                | octavia                          |
        | options             | {}                               |
        | password_expires_at | None                             |
        +---------------------+----------------------------------+
      
    • Add the admin role to the octavia user:

      $ openstack role add --project service --user octavia admin
      

      Note

      This command produces no output.

      Note

      The Octavia service does not require the full admin role. Details of how to run Octavia without the admin role will come in a future version of this document.

    • Create the octavia service entities:

      $ openstack service create --name octavia --description "OpenStack Octavia" load-balancer
        +-------------+----------------------------------+
        | Field       | Value                            |
        +-------------+----------------------------------+
        | description | OpenStack Octavia                |
        | enabled     | True                             |
        | id          | d854f6fff0a64f77bda8003c8dedfada |
        | name        | octavia                          |
        | type        | load-balancer                    |
        +-------------+----------------------------------+
      
  4. Create the Load-balancer service API endpoints:

    $ openstack endpoint create --region RegionOne \
      load-balancer public http://controller:9876
      +--------------+----------------------------------+
      | Field        | Value                            |
      +--------------+----------------------------------+
      | enabled      | True                             |
      | id           | 47cf883de46242c39f147c52f2958ebf |
      | interface    | public                           |
      | region       | RegionOne                        |
      | region_id    | RegionOne                        |
      | service_id   | d854f6fff0a64f77bda8003c8dedfada |
      | service_name | octavia                          |
      | service_type | load-balancer                    |
      | url          | http://controller:9876           |
      +--------------+----------------------------------+
    
    $ openstack endpoint create --region RegionOne \
      load-balancer internal http://controller:9876
      +--------------+----------------------------------+
      | Field        | Value                            |
      +--------------+----------------------------------+
      | enabled      | True                             |
      | id           | 225aef8465ef4df48a341aaaf2b0a390 |
      | interface    | internal                         |
      | region       | RegionOne                        |
      | region_id    | RegionOne                        |
      | service_id   | d854f6fff0a64f77bda8003c8dedfada |
      | service_name | octavia                          |
      | service_type | load-balancer                    |
      | url          | http://controller:9876           |
      +--------------+----------------------------------+
    
    $ openstack endpoint create --region RegionOne \
      load-balancer admin http://controller:9876
      +--------------+----------------------------------+
      | Field        | Value                            |
      +--------------+----------------------------------+
      | enabled      | True                             |
      | id           | 375eb5057fb546edbdf3ee4866179672 |
      | interface    | admin                            |
      | region       | RegionOne                        |
      | region_id    | RegionOne                        |
      | service_id   | d854f6fff0a64f77bda8003c8dedfada |
      | service_name | octavia                          |
      | service_type | load-balancer                    |
      | url          | http://controller:9876           |
      +--------------+----------------------------------+
    
  5. Create octavia-openrc file

    cat << EOF >> $HOME/octavia-openrc
    export OS_PROJECT_DOMAIN_NAME=Default
    export OS_USER_DOMAIN_NAME=Default
    export OS_PROJECT_NAME=service
    export OS_USERNAME=octavia
    export OS_PASSWORD=OCTAVIA_PASS
    export OS_AUTH_URL=http://controller:5000
    export OS_IDENTITY_API_VERSION=3
    export OS_IMAGE_API_VERSION=2
    export OS_VOLUME_API_VERSION=3
    EOF
    

    Replace OCTAVIA_PASS with the password you chose for the octavia user in the Identity service.

  6. Source the octavia credentials to gain access to octavia CLI commands:

    $ . $HOME/octavia-openrc
    
  7. Create the amphora image

    For creating amphora image, please refer to the Building Octavia Amphora Images.

  8. Upload the amphora image

    $ openstack image create --disk-format qcow2 --container-format bare \
      --private --tag amphora \
      --file <path to the amphora image> amphora-x64-haproxy
    
  9. Create a flavor for the amphora image

    $ openstack flavor create --id 200 --vcpus 1 --ram 1024 \
      --disk 2 "amphora" --private
    

Install and configure components

  1. Install the packages:

    # apt install octavia-api octavia-health-manager octavia-housekeeping \
      octavia-worker python3-octavia python3-octaviaclient
    

    If octavia-common and octavia-api packages ask you to configure, choose No.

  2. Create the certificates

    $ git clone https://opendev.org/openstack/octavia.git
    $ cd octavia/bin/
    $ source create_dual_intermediate_CA.sh
    $ sudo mkdir -p /etc/octavia/certs/private
    $ sudo chmod 755 /etc/octavia -R
    $ sudo cp -p etc/octavia/certs/server_ca.cert.pem /etc/octavia/certs
    $ sudo cp -p etc/octavia/certs/server_ca-chain.cert.pem /etc/octavia/certs
    $ sudo cp -p etc/octavia/certs/server_ca.key.pem /etc/octavia/certs/private
    $ sudo cp -p etc/octavia/certs/client_ca.cert.pem /etc/octavia/certs
    $ sudo cp -p etc/octavia/certs/client.cert-and-key.pem /etc/octavia/certs/private
    

    For the production environment, Please refer to the Octavia Certificate Configuration Guide.

  3. Source the octavia credentials to gain access to octavia CLI commands:

    $ . octavia-openrc
    
  4. Create security groups and their rules

    $ openstack security group create lb-mgmt-sec-grp
    $ openstack security group rule create --protocol icmp lb-mgmt-sec-grp
    $ openstack security group rule create --protocol tcp --dst-port 22 lb-mgmt-sec-grp
    $ openstack security group rule create --protocol tcp --dst-port 9443 lb-mgmt-sec-grp
    $ openstack security group create lb-health-mgr-sec-grp
    $ openstack security group rule create --protocol udp --dst-port 5555 lb-health-mgr-sec-grp
    
  5. Create a key pair for logging in to the amphora instance

    $ openstack keypair create --public-key ~/.ssh/id_rsa.pub mykey
    

    Note

    Check whether ” ~/.ssh/id_rsa.pub” file exists or not in advance. If the file does not exist, run the ssh-keygen command to create it.

  6. Create dhclient.conf file for dhclient

    $ cd $HOME
    $ sudo mkdir -m755 -p /etc/dhcp/octavia
    $ sudo cp octavia/etc/dhcp/dhclient.conf /etc/dhcp/octavia
    
  7. Create a network

    Note

    During the execution of the below command, please save the of BRNAME and MGMT_PORT_MAC in a notepad for further reference.

    $ OCTAVIA_MGMT_SUBNET=172.16.0.0/12
    $ OCTAVIA_MGMT_SUBNET_START=172.16.0.100
    $ OCTAVIA_MGMT_SUBNET_END=172.16.31.254
    $ OCTAVIA_MGMT_PORT_IP=172.16.0.2
    
    $ openstack network create lb-mgmt-net
    $ openstack subnet create --subnet-range $OCTAVIA_MGMT_SUBNET --allocation-pool \
      start=$OCTAVIA_MGMT_SUBNET_START,end=$OCTAVIA_MGMT_SUBNET_END \
      --network lb-mgmt-net lb-mgmt-subnet
    
    $ SUBNET_ID=$(openstack subnet show lb-mgmt-subnet -f value -c id)
    $ PORT_FIXED_IP="--fixed-ip subnet=$SUBNET_ID,ip-address=$OCTAVIA_MGMT_PORT_IP"
    
    $ MGMT_PORT_ID=$(openstack port create --security-group \
      lb-health-mgr-sec-grp --device-owner Octavia:health-mgr \
      --host=$(hostname) -c id -f value --network lb-mgmt-net \
      $PORT_FIXED_IP octavia-health-manager-listen-port)
    
    $ MGMT_PORT_MAC=$(openstack port show -c mac_address -f value \
      $MGMT_PORT_ID)
    
    $ sudo ip link add o-hm0 type veth peer name o-bhm0
    $ NETID=$(openstack network show lb-mgmt-net -c id -f value)
    $ BRNAME=brq$(echo $NETID|cut -c 1-11)
    $ sudo brctl addif $BRNAME o-bhm0
    $ sudo ip link set o-bhm0 up
    
    $ sudo ip link set dev o-hm0 address $MGMT_PORT_MAC
    $ sudo iptables -I INPUT -i o-hm0 -p udp --dport 5555 -j ACCEPT
    $ sudo dhclient -v o-hm0 -cf /etc/dhcp/octavia
    
  8. Below settings are required to create veth pair after the host reboot

    Edit the /etc/systemd/network/o-hm0.network file

    [Match]
    Name=o-hm0
    
    [Network]
    DHCP=yes
    

    Edit the /etc/systemd/system/octavia-interface.service file

    [Unit]
    Description=Octavia Interface Creator
    Requires=neutron-linuxbridge-agent.service
    After=neutron-linuxbridge-agent.service
    
    [Service]
    Type=oneshot
    RemainAfterExit=true
    ExecStart=/opt/octavia-interface.sh start
    ExecStop=/opt/octavia-interface.sh stop
    
    [Install]
    WantedBy=multi-user.target
    

    Edit the /opt/octavia-interface.sh file

    #!/bin/bash
    
    set -ex
    
    MAC=$MGMT_PORT_MAC
    BRNAME=$BRNAME
    
    if [ "$1" == "start" ]; then
      ip link add o-hm0 type veth peer name o-bhm0
      brctl addif $BRNAME o-bhm0
      ip link set o-bhm0 up
      ip link set dev o-hm0 address $MAC
      ip link set o-hm0 up
      iptables -I INPUT -i o-hm0 -p udp --dport 5555 -j ACCEPT
    elif [ "$1" == "stop" ]; then
      ip link del o-hm0
    else
      brctl show $BRNAME
      ip a s dev o-hm0
    fi
    

    You need to substitute $MGMT_PORT_MAC and $BRNAME for the values in your environment.

  9. Edit the /etc/octavia/octavia.conf file

    • In the [database] section, configure database access:

      [database]
      connection = mysql+pymysql://octavia:OCTAVIA_DBPASS@controller/octavia
      

      Replace OCTAVIA_DBPASS with the password you chose for the Octavia databases.

    • In the [DEFAULT] section, configure the transport url for RabbitMQ message broker.

      [DEFAULT]
      transport_url = rabbit://openstack:RABBIT_PASS@controller
      

      Replace RABBIT_PASS with the password you chose for the openstack account in RabbitMQ.

    • In the [oslo_messaging] section, configure the transport url for RabbitMQ message broker and topic name.

      [oslo_messaging]
      ...
      topic = octavia_prov
      

      Replace RABBIT_PASS with the password you chose for the openstack account in RabbitMQ.

    • In the [api_settings] section, configure the host IP and port to bind to.

      [api_settings]
      bind_host = 0.0.0.0
      bind_port = 9876
      
    • In the [keystone_authtoken] section, configure Identity service access.

      [keystone_authtoken]
      www_authenticate_uri = http://controller:5000
      auth_url = http://controller:5000
      memcached_servers = controller:11211
      auth_type = password
      project_domain_name = Default
      user_domain_name = Default
      project_name = service
      username = octavia
      password = OCTAVIA_PASS
      

      Replace OCTAVIA_PASS with the password you chose for the octavia user in the Identity service.

    • In the [service_auth] section, configure credentials for using other openstack services

      [service_auth]
      auth_url = http://controller:5000
      memcached_servers = controller:11211
      auth_type = password
      project_domain_name = Default
      user_domain_name = Default
      project_name = service
      username = octavia
      password = OCTAVIA_PASS
      

      Replace OCTAVIA_PASS with the password you chose for the octavia user in the Identity service.

    • In the [certificates] section, configure the absolute path to the CA Certificate, the Private Key for signing, and passphrases.

      [certificates]
      ...
      server_certs_key_passphrase = insecure-key-do-not-use-this-key
      ca_private_key_passphrase = not-secure-passphrase
      ca_private_key = /etc/octavia/certs/private/server_ca.key.pem
      ca_certificate = /etc/octavia/certs/server_ca.cert.pem
      

      Note

      The values of ca_private_key_passphrase and server_certs_key_passphrase are default and should not be used in production. The server_certs_key_passphrase must be a base64 compatible and 32 characters long string.

    • In the [haproxy_amphora] section, configure the client certificate and the CA.

      [haproxy_amphora]
      ...
      server_ca = /etc/octavia/certs/server_ca-chain.cert.pem
      client_cert = /etc/octavia/certs/private/client.cert-and-key.pem
      
    • In the [health_manager] section, configure the IP and port number for heartbeat.

      [health_manager]
      ...
      bind_port = 5555
      bind_ip = 172.16.0.2
      controller_ip_port_list = 172.16.0.2:5555
      
    • In the [controller_worker] section, configure worker settings.

      [controller_worker]
      ...
      amp_image_owner_id = <id of service project>
      amp_image_tag = amphora
      amp_ssh_key_name = mykey
      amp_secgroup_list = <lb-mgmt-sec-grp_id>
      amp_boot_network_list = <lb-mgmt-net_id>
      amp_flavor_id = 200
      network_driver = allowed_address_pairs_driver
      compute_driver = compute_nova_driver
      amphora_driver = amphora_haproxy_rest_driver
      client_ca = /etc/octavia/certs/client_ca.cert.pem
      
  10. Populate the octavia database:

# octavia-db-manage --config-file /etc/octavia/octavia.conf upgrade head

Finalize installation

Restart the services:

# systemctl restart octavia-api octavia-health-manager octavia-housekeeping octavia-worker