`Home `_ OpenStack-Ansible Installation Guide ======================================== Configuring the network on a target host ======================================== This example uses the following parameters to configure networking on a single target host. See `Figure 3.2, "Target hosts for infrastructure, networking, and storage services" `_ and `Figure 3.3, "Target hosts for Compute service" `_ for a visual representation of these parameters in the architecture. - VLANs: - Host management: Untagged/Native - Container management: 10 - Tunnels: 30 - Storage: 20 Networks: - Host management: 10.240.0.0/22 - Container management: 172.29.236.0/22 - Tunnel: 172.29.240.0/22 - Storage: 172.29.244.0/22 Addresses: - Host management: 10.240.0.11 - Host management gateway: 10.240.0.1 - DNS servers: 69.20.0.164 69.20.0.196 - Container management: 172.29.236.11 - Tunnel: 172.29.240.11 - Storage: 172.29.244.11   **Figure 3.2. Target hosts for infrastructure, networking, and storage services** .. image:: figures/networkarch-container-external-example.png **Figure 3.3. Target hosts for Compute service** .. image:: figures/networkarch-bare-external-example.png Contents of the ``/etc/network/interfaces`` file: .. code-block:: yaml # Physical interface 1 auto eth0 iface eth0 inet manual bond-master bond0 bond-primary eth0 # Physical interface 2 auto eth1 iface eth1 inet manual bond-master bond1 bond-primary eth1 # Physical interface 3 auto eth2 iface eth2 inet manual bond-master bond0 # Physical interface 4 auto eth3 iface eth3 inet manual bond-master bond1 .. code-block:: yaml # Bond interface 0 (physical interfaces 1 and 3) auto bond0 iface bond0 inet static bond-slaves eth0 eth2 bond-mode active-backup bond-miimon 100 bond-downdelay 200 bond-updelay 200 address 10.240.0.11 netmask 255.255.252.0 gateway 10.240.0.1 dns-nameservers 69.20.0.164 69.20.0.196 # Bond interface 1 (physical interfaces 2 and 4) auto bond1 iface bond1 inet manual bond-slaves eth1 eth3 bond-mode active-backup bond-miimon 100 bond-downdelay 250 bond-updelay 250 # Container management VLAN interface iface bond0.10 inet manual vlan-raw-device bond0 # OpenStack Networking VXLAN (tunnel/overlay) VLAN interface iface bond1.30 inet manual vlan-raw-device bond1 # Storage network VLAN interface (optional) iface bond0.20 inet manual vlan-raw-device bond0 # Container management bridge auto br-mgmt iface br-mgmt inet static bridge_stp off bridge_waitport 0 bridge_fd 0 # Bridge port references tagged interface bridge_ports bond0.10 address 172.29.236.11 netmask 255.255.252.0 dns-nameservers 69.20.0.164 69.20.0.196 # OpenStack Networking VXLAN (tunnel/overlay) bridge auto br-vxlan iface br-vxlan inet static bridge_stp off bridge_waitport 0 bridge_fd 0 # Bridge port references tagged interface bridge_ports bond1.30 address 172.29.240.11 netmask 255.255.252.0 # OpenStack Networking VLAN bridge auto br-vlan iface br-vlan inet manual bridge_stp off bridge_waitport 0 bridge_fd 0 # Bridge port references untagged interface bridge_ports bond1 # Storage bridge (optional) auto br-storage iface br-storage inet static bridge_stp off bridge_waitport 0 bridge_fd 0 # Bridge port reference tagged interface bridge_ports bond0.20 address 172.29.244.11 netmask 255.255.252.0 -------------- .. include:: navigation.txt