Configuration Options¶

oslo.messaging uses oslo.config to define and manage configuration options to allow the deployer to control how an application uses the underlying messaging system.

DEFAULT¶

rpc_conn_pool_size¶

Type: integer
Default: 30

Size of RPC connection pool.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_conn_pool_size

conn_pool_min_size¶

Type: integer
Default: 2

The pool size limit for connections expiration policy

conn_pool_ttl¶

Type: integer
Default: 1200

The time-to-live in sec of idle connections in the pool

rpc_zmq_bind_address¶

Type: string
Default: *

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_bind_address

rpc_zmq_matchmaker¶

Type: string
Default: redis
Valid Values: redis, sentinel, dummy

MatchMaker driver.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_matchmaker

rpc_zmq_contexts¶

Type: integer
Default: 1

Number of ZeroMQ contexts, defaults to 1.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_contexts

rpc_zmq_topic_backlog¶

Type: integer
Default: <None>

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_topic_backlog

rpc_zmq_ipc_dir¶

Type: string
Default: /var/run/openstack

Directory for holding IPC sockets.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_ipc_dir

rpc_zmq_host¶

Type: string
Default: localhost

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_host

zmq_linger¶

Type: integer
Default: -1

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_cast_timeout

rpc_poll_timeout¶

Type: integer
Default: 1

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_poll_timeout

zmq_target_expire¶

Type: integer
Default: 300

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

Deprecated Variations¶
Group	Name
DEFAULT	zmq_target_expire

zmq_target_update¶

Type: integer
Default: 180

Update period in seconds of a name service record about existing target.

Deprecated Variations¶
Group	Name
DEFAULT	zmq_target_update

use_pub_sub¶

Type: boolean
Default: false

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

Deprecated Variations¶
Group	Name
DEFAULT	use_pub_sub

use_router_proxy¶

Type: boolean
Default: false

Use ROUTER remote proxy.

Deprecated Variations¶
Group	Name
DEFAULT	use_router_proxy

use_dynamic_connections¶

Type: boolean
Default: false

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

zmq_failover_connections¶

Type: integer
Default: 2

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

rpc_zmq_min_port¶

Type: port number
Default: 49153
Minimum Value: 0
Maximum Value: 65535

Minimal port number for random ports range.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_min_port

rpc_zmq_max_port¶

Type: integer
Default: 65536
Minimum Value: 1
Maximum Value: 65536

Maximal port number for random ports range.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_max_port

rpc_zmq_bind_port_retries¶

Type: integer
Default: 100

Number of retries to find free port number before fail with ZMQBindError.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_bind_port_retries

rpc_zmq_serialization¶

Type: string
Default: json
Valid Values: json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_serialization

zmq_immediate¶

Type: boolean
Default: true

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_tcp_keepalive¶

Type: integer
Default: -1

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_idle¶

Type: integer
Default: -1

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_cnt¶

Type: integer
Default: -1

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl¶

Type: integer
Default: -1

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

rpc_thread_pool_size¶

Type: integer
Default: 100

Maximum number of (green) threads to work concurrently.

rpc_message_ttl¶

Type: integer
Default: 300

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_use_acks¶

Type: boolean
Default: false

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_ack_timeout_base¶

Type: integer
Default: 15

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier¶

Type: integer
Default: 2

Number to multiply base ack timeout by after each retry attempt.

rpc_retry_attempts¶

Type: integer
Default: 3

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

subscribe_on¶

Type: list
Default: ''

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

executor_thread_pool_size¶

Type: integer
Default: 64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_thread_pool_size

rpc_response_timeout¶

Type: integer
Default: 60

Seconds to wait for a response from a call.

transport_url¶

Type: string
Default: <None>

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

rpc_backend¶

Type: string
Default: rabbit

The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

control_exchange¶

Type: string
Default: openstack

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

matchmaker_redis¶

host¶

Type: string
Default: 127.0.0.1

Host to locate redis.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

port¶

Type: port number
Default: 6379
Minimum Value: 0
Maximum Value: 65535

Use this port to connect to redis host.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

password¶

Type: string
Default: ''

Password for Redis server (optional).

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

sentinel_hosts¶

Type: list
Default: ''

List of Redis Sentinel hosts (fault tolerance mode), e.g., [host:port, host1:port … ]

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

sentinel_group_name¶

Type: string
Default: oslo-messaging-zeromq

Redis replica set name.

wait_timeout¶

Type: integer
Default: 2000

Time in ms to wait between connection attempts.

check_timeout¶

Type: integer
Default: 20000

Time in ms to wait before the transaction is killed.

socket_timeout¶

Type: integer
Default: 10000

Timeout in ms on blocking socket operations.

oslo_messaging_amqp¶

container_name¶

Type: string
Default: <None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations¶
Group	Name
amqp1	container_name

idle_timeout¶

Type: integer
Default: 0

Timeout for inactive connections (in seconds)

Deprecated Variations¶
Group	Name
amqp1	idle_timeout

trace¶

Type: boolean
Default: false

Debug: dump AMQP frames to stdout

Deprecated Variations¶
Group	Name
amqp1	trace

ssl¶

Type: boolean
Default: false

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file¶

Type: string
Default: ''

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations¶
Group	Name
amqp1	ssl_ca_file

ssl_cert_file¶

Type: string
Default: ''

Self-identifying certificate PEM file for client authentication

Deprecated Variations¶
Group	Name
amqp1	ssl_cert_file

ssl_key_file¶

Type: string
Default: ''

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations¶
Group	Name
amqp1	ssl_key_file

ssl_key_password¶

Type: string
Default: <None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations¶
Group	Name
amqp1	ssl_key_password

ssl_verify_vhost¶

Type: boolean
Default: false

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

allow_insecure_clients¶

Type: boolean
Default: false

Accept clients using either SSL or plain TCP

Deprecated Variations¶
Group	Name
amqp1	allow_insecure_clients

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Not applicable - not a SSL server

sasl_mechanisms¶

Type: string
Default: ''

Space separated list of acceptable SASL mechanisms

Deprecated Variations¶
Group	Name
amqp1	sasl_mechanisms

sasl_config_dir¶

Type: string
Default: ''

Path to directory that contains the SASL configuration

Deprecated Variations¶
Group	Name
amqp1	sasl_config_dir

sasl_config_name¶

Type: string
Default: ''

Name of configuration file (without .conf suffix)

Deprecated Variations¶
Group	Name
amqp1	sasl_config_name

sasl_default_realm¶

Type: string
Default: ''

SASL realm to use if no realm present in username

username¶

Type: string
Default: ''

User name for message broker authentication

Deprecated Variations¶
Group	Name
amqp1	username

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Should use configuration option transport_url to provide the username.

password¶

Type: string
Default: ''

Password for message broker authentication

Deprecated Variations¶
Group	Name
amqp1	password

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Should use configuration option transport_url to provide the password.

connection_retry_interval¶

Type: integer
Default: 1
Minimum Value: 1

Seconds to pause before attempting to re-connect.

connection_retry_backoff¶

Type: integer
Default: 2
Minimum Value: 0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max¶

Type: integer
Default: 30
Minimum Value: 1

Maximum limit for connection_retry_interval + connection_retry_backoff

link_retry_delay¶

Type: integer
Default: 10
Minimum Value: 1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry¶

Type: integer
Default: 0
Minimum Value: -1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout¶

Type: integer
Default: 30
Minimum Value: 5

The deadline for an rpc reply message delivery.

default_send_timeout¶

Type: integer
Default: 30
Minimum Value: 5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout¶

Type: integer
Default: 30
Minimum Value: 5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout¶

Type: integer
Default: 600
Minimum Value: 1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode¶

Type: string
Default: dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost¶

Type: boolean
Default: true

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix¶

Type: string
Default: exclusive

address prefix used when sending to a specific server

Deprecated Variations¶
Group	Name
amqp1	server_request_prefix

broadcast_prefix¶

Type: string
Default: broadcast

address prefix used when broadcasting to all servers

Deprecated Variations¶
Group	Name
amqp1	broadcast_prefix

group_request_prefix¶

Type: string
Default: unicast

address prefix when sending to any server in group

Deprecated Variations¶
Group	Name
amqp1	group_request_prefix

rpc_address_prefix¶

Type: string
Default: openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix¶

Type: string
Default: openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address¶

Type: string
Default: multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address¶

Type: string
Default: unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address¶

Type: string
Default: anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange¶

Type: string
Default: <None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange¶

Type: string
Default: <None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

reply_link_credit¶

Type: integer
Default: 200
Minimum Value: 1

Window size for incoming RPC Reply messages.

rpc_server_credit¶

Type: integer
Default: 100
Minimum Value: 1

Window size for incoming RPC Request messages

notify_server_credit¶

Type: integer
Default: 100
Minimum Value: 1

Window size for incoming Notification messages

pre_settled¶

Type: multi-valued
Default: rpc-cast
Default: rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

oslo_messaging_kafka¶

kafka_default_host¶

Type: string
Default: localhost

Default Kafka broker Host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

kafka_default_port¶

Type: port number
Default: 9092
Minimum Value: 0
Maximum Value: 65535

Default Kafka broker Port

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

kafka_max_fetch_bytes¶

Type: integer
Default: 1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout¶

Type: floating point
Default: 1.0

Default timeout(s) for Kafka consumers

pool_size¶

Type: integer
Default: 10

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Driver no longer uses connection pool.

conn_pool_min_size¶

Type: integer
Default: 2

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Driver no longer uses connection pool.

conn_pool_ttl¶

Type: integer
Default: 1200

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Driver no longer uses connection pool.

consumer_group¶

Type: string
Default: oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout¶

Type: floating point
Default: 0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size¶

Type: integer
Default: 16384

Size of batch for the producer async send

enable_auto_commit¶

Type: boolean
Default: false

Enable asynchronous consumer commits

max_poll_records¶

Type: integer
Default: 500

The maximum number of records returned in a poll call

security_protocol¶

Type: string
Default: PLAINTEXT
Valid Values: PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL

Protocol used to communicate with brokers

sasl_mechanism¶

Type: string
Default: PLAIN

Mechanism when security protocol is SASL

ssl_cafile¶

Type: string
Default: ''

CA certificate PEM file used to verify the server certificate

oslo_messaging_notifications¶

driver¶

Type: multi-valued
Default: ''

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations¶
Group	Name
DEFAULT	notification_driver

transport_url¶

Type: string
Default: <None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations¶
Group	Name
DEFAULT	notification_transport_url

topics¶

Type: list
Default: notifications

AMQP topic used for OpenStack notifications.

Deprecated Variations¶
Group	Name
rpc_notifier2	topics
DEFAULT	notification_topics

retry¶

Type: integer
Default: -1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

oslo_messaging_rabbit¶

amqp_durable_queues¶

Type: boolean
Default: false

Use durable queues in AMQP.

Deprecated Variations¶
Group	Name
DEFAULT	amqp_durable_queues
DEFAULT	rabbit_durable_queues

amqp_auto_delete¶

Type: boolean
Default: false

Auto-delete queues in AMQP.

Deprecated Variations¶
Group	Name
DEFAULT	amqp_auto_delete

ssl¶

Type: boolean
Default: false

Connect over SSL.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	rabbit_use_ssl

ssl_version¶

Type: string
Default: ''

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_version

ssl_key_file¶

Type: string
Default: ''

SSL key file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_keyfile

ssl_cert_file¶

Type: string
Default: ''

SSL cert file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_certfile

ssl_ca_file¶

Type: string
Default: ''

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_ca_certs

kombu_reconnect_delay¶

Type: floating point
Default: 1.0

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations¶
Group	Name
DEFAULT	kombu_reconnect_delay

kombu_compression¶

Type: string
Default: <None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout¶

Type: integer
Default: 60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_reconnect_timeout

kombu_failover_strategy¶

Type: string
Default: round-robin
Valid Values: round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_host¶

Type: string
Default: localhost

The RabbitMQ broker address where a single node is used.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

rabbit_port¶

Type: port number
Default: 5672
Minimum Value: 0
Maximum Value: 65535

The RabbitMQ broker port where a single node is used.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_port

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

rabbit_hosts¶

Type: list
Default: $rabbit_host:$rabbit_port

RabbitMQ HA cluster host:port pairs.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_hosts

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

rabbit_userid¶

Type: string
Default: guest

The RabbitMQ userid.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_userid

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

rabbit_password¶

Type: string
Default: guest

The RabbitMQ password.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_password

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

rabbit_login_method¶

Type: string
Default: AMQPLAIN
Valid Values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_login_method

rabbit_virtual_host¶

Type: string
Default: /

The RabbitMQ virtual host.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_virtual_host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Replaced by [DEFAULT]/transport_url

rabbit_retry_interval¶

Type: integer
Default: 1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff¶

Type: integer
Default: 2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_retry_backoff

rabbit_interval_max¶

Type: integer
Default: 30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_max_retries¶

Type: integer
Default: 0

Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count).

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_max_retries

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

rabbit_ha_queues¶

Type: boolean
Default: false

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_ha_queues

rabbit_transient_queues_ttl¶

Type: integer
Default: 1800
Minimum Value: 1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count¶

Type: integer
Default: 0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold¶

Type: integer
Default: 60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disable the heartbeat). EXPERIMENTAL

heartbeat_rate¶

Type: integer
Default: 2

How often times during the heartbeat_timeout_threshold we check the heartbeat.

oslo_messaging_zmq¶

rpc_zmq_bind_address¶

Type: string
Default: *

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_bind_address

rpc_zmq_matchmaker¶

Type: string
Default: redis
Valid Values: redis, sentinel, dummy

MatchMaker driver.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_matchmaker

rpc_zmq_contexts¶

Type: integer
Default: 1

Number of ZeroMQ contexts, defaults to 1.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_contexts

rpc_zmq_topic_backlog¶

Type: integer
Default: <None>

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_topic_backlog

rpc_zmq_ipc_dir¶

Type: string
Default: /var/run/openstack

Directory for holding IPC sockets.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_ipc_dir

rpc_zmq_host¶

Type: string
Default: localhost

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_host

zmq_linger¶

Type: integer
Default: -1

Deprecated Variations¶
Group	Name
DEFAULT	rpc_cast_timeout

rpc_poll_timeout¶

Type: integer
Default: 1

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_poll_timeout

zmq_target_expire¶

Type: integer
Default: 300

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

Deprecated Variations¶
Group	Name
DEFAULT	zmq_target_expire

zmq_target_update¶

Type: integer
Default: 180

Update period in seconds of a name service record about existing target.

Deprecated Variations¶
Group	Name
DEFAULT	zmq_target_update

use_pub_sub¶

Type: boolean
Default: false

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

Deprecated Variations¶
Group	Name
DEFAULT	use_pub_sub

use_router_proxy¶

Type: boolean
Default: false

Use ROUTER remote proxy.

Deprecated Variations¶
Group	Name
DEFAULT	use_router_proxy

use_dynamic_connections¶

Type: boolean
Default: false

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

zmq_failover_connections¶

Type: integer
Default: 2

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

rpc_zmq_min_port¶

Type: port number
Default: 49153
Minimum Value: 0
Maximum Value: 65535

Minimal port number for random ports range.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_min_port

rpc_zmq_max_port¶

Type: integer
Default: 65536
Minimum Value: 1
Maximum Value: 65536

Maximal port number for random ports range.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_max_port

rpc_zmq_bind_port_retries¶

Type: integer
Default: 100

Number of retries to find free port number before fail with ZMQBindError.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_bind_port_retries

rpc_zmq_serialization¶

Type: string
Default: json
Valid Values: json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_serialization

zmq_immediate¶

Type: boolean
Default: true

zmq_tcp_keepalive¶

Type: integer
Default: -1

zmq_tcp_keepalive_idle¶

Type: integer
Default: -1

zmq_tcp_keepalive_cnt¶

Type: integer
Default: -1

zmq_tcp_keepalive_intvl¶

Type: integer
Default: -1

rpc_thread_pool_size¶

Type: integer
Default: 100

Maximum number of (green) threads to work concurrently.

rpc_message_ttl¶

Type: integer
Default: 300

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_use_acks¶

Type: boolean
Default: false

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_ack_timeout_base¶

Type: integer
Default: 15

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier¶

Type: integer
Default: 2

Number to multiply base ack timeout by after each retry attempt.

rpc_retry_attempts¶

Type: integer
Default: 3

subscribe_on¶

Type: list
Default: ''

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

API¶

oslo_messaging.opts.list_opts()¶

Return a list of oslo.config options available in the library.

The returned list includes all oslo.config options which may be registered at runtime by the library.

Each element of the list is a tuple. The first element is the name of the group under which the list of elements in the second element will be registered. A group name of None corresponds to the [DEFAULT] group in config files.

This function is also discoverable via the ‘oslo_messaging’ entry point under the ‘oslo.config.opts’ namespace.

The purpose of this is to allow tools like the Oslo sample config file generator to discover the options exposed to users by this library.

Returns: a list of (group_name, opts) tuples

Configuration Options

Configuration Options¶

DEFAULT¶

matchmaker_redis¶

oslo_messaging_amqp¶

oslo_messaging_kafka¶

oslo_messaging_notifications¶

oslo_messaging_rabbit¶

oslo_messaging_zmq¶

API¶

oslo.messaging

Page Contents