3.2. Methodology for testing Hyper-Scale

3.2.1. What is meant by Hyper-Scale?

For this section, hyper-scale is defined as being able to achieve 100K of something in an OpenStack cloud. Initially this may be VMs, but could be hypervisors, projects, etc. Because of the open-endnesses of this definition, it is necessary to identify all places where operations show linear (or even worse…) execution time as the number of items that the operation deals with scales up. For example, if execution time of an operation is order of 10 microseconds per item that operation is dealing with, that means that at 100K, a second has been added to agent execution time.

3.2.2. How is linearity defined in this context?

To determine linearity, one measures the execution time of each operation over a sample the has increasing scale and then performance a least squares fit 1 to the raw data. Such a fit looks to map a straight line (y=mx+b) to the sample data, where

  • x == the number of items being scaled,

  • m == the slope of the fit,

  • b == the vertical intercept, and

  • y == the operation’s execution time

In addition to finding m and b, the fit will also generate a correlation coefficient (r) which provides a measurement of how random the sample data was. As an initial filter, fits with a correlation coefficient above a certain threshold can be considered as candidates for improvement. Once an operation is considered a candidate for improvement, then the execution time of all of its sub-operations are measured and a least squares fit performed on them. When looking at sub-operations, of interest are the slope and the ratio of the vertical intercept to the slope (the “doubling scale” of the operation). These together determine the “long pole in the test” (the sub-operation that should be analyzed first), with the slope determining the order and the “doubling scale” acting as a tie breaker.

3.2.3. How Should Code be Instrumented When Looking for Hyper-Scale?

Today, instrumentation is a very manual process: after running devstack, debug LOG statements are added into the code base to indicate the entrance and exit of each routine that should be timed. These debug log statements can be tagged with strings like “instrument:” or “instrument2:” to allow multiple levels of instrumentation to be applied during a single test run. Then restart the agent that is being instrumented via the screen that is created by devstack.

Note: as this ends up to be an iterative process as one looks to isolate the code that shows linear execution time, for subsequent restacks, it usually makes sense to not reclone (unless you want to repeat the by hand editing afterwards).

It is hoped that the osprofiler sub-project of oslo 2 will be extended to allow for method decoration to replace the use of by hand editing.

3.2.4. Setup Considerations

There are two ways to go about looking for potential hyper-scale issues. The first is to use a brute force method where one actually builds a hyper-scale cloud and tests. Another route is to build a cloud using the slowest, smallest, simplest components one has on hand. The idea behind this approach is that by slowing down the hardware, the slope and intercept of the least squares fit are both scaled up, making linearity issues easier to find with lower numbers of instances. However, this makes comparing raw values from the least squares fits between different setups difficult - one can never be 100% sure that the comparison is “apples-to-apples” and that hardware effects are completely isolated. The choice above of using the correlation coefficient and “doubling scale” above are intended to use values that are more independent of the test cloud design.

3.2.5. An Example: Neutron L3 Scheduling

The rest of this section presents an example of this methodology in action (In fact, this example was what led to the methodology being developed). This example uses a four node cloud, configured as a controller, a network node, and two compute nodes.

To determine what parts of L3 scheduling needed scaling improvements the following experiment was used. This test can certainly be automated via Rally and should be (once instrumentation no longer requires manual decoration and/or code manipulation):

  1. Create the external network and subnet with:

neutron net-create test-external --router:external --provider:physical_network default --provider:network_type flat
neutron subnet-create --name test-external-subnet --disable-dhcp test-external 172.18.128.0/20
  1. Create X number of projects

  2. For each project, perform the following steps (in fhe following, $i is the tenant index and $id is the tenant UUID, $net is the UUID of the tenant network created in the first step below, and $port is the interface port UUID reported by nova):

neutron net-create network-$i --tenant-id $id
neutron subnet-create network-$i 192.168.18.0/24 --name subnet-$i --tenant-id $id
neutron router-create router-$i --tenant-id $id
neutron router-interface-add router-$i subnet-$i
neutron router-gateway-set router-$i test-external
keystone user-role-add --user=admin --tenant=tenant-$i --role=admin
nova --os-tenant-name tenant-$i boot --flavor m1.nano --image cirros-0.3.4-x86_64-uec --nic net-id=$net instance-tenant-$i
(once the instance's interface port is shown as active by nova):
neutron floatingip-create --tenant-id $id --port-id $port test-external
  1. For each project, perform the following steps:

neutron floatingip-delete <floatingip-uuid>
nova --os-tenant-name tenant-$i stop instance-tenant-$i
neutron router-gateway-clear <router-uuid> test-external
neutron router-interface-delete router-$i subnet-$i
neutron router-delete router-$i
neutron subnet-delete subnet-$i
neutron net-delete network-$i

This provides testing of both the paths that create and delete Neutron routers and the attributes that make them usuable.

3.2.5.1. Extracting Execution Time

Once one has instrumented logs (or instrumentation records), extracting execution time becomes a matter of filtering via one’s favorite language. One approach is to filter to a comma separate value (csv) file and then import that into a spreadsheet program that has the least squares function built in to find the fit and correlation coefficient.

3.2.5.2. Legacy Results Using Neutron Master as of 11/6/15 - Adding Routers/FIPs

Function

Corelation Coeficient

Slope (msec/router)

Doubling Scale (routers)

Interface Add

0.302

1.56

1211

Set Gateway

0.260

Add FIP

2.46E-05

Thus, the interface add operation is a candidate for further evaluation. Looking at the largest contributers to the slope, we find the following methods at successively deeper levels of code:

  • _process_router_if_compatible (1.34 msec/router)

    • _process_added_router (1.31 msec/router)

      • _router_added (0.226 msec/router)

      • _process (0.998 msec/router)

        • process_internal_ports (0.888 msec/router)

          • ovs add-port (0.505 msec/router)

This last time is outside of Neutron: it needs to be addressed from within the OVS code itself (this is being tracked by 3)

3.2.5.3. Legacy Results Using Neutron Master as of 11/6/15 - Removing Routers/FIPs

Function

Corelation Coeficient

Slope (msec/router)

Doubling Scale (routers)

Clear FIP

0.389

1.503

401.5

Clear Gateway

0.535

1.733

289.3

Remove Interface

0.390

1.425

302.6

Remove Router

0.526

1.5

252.8

Each of these operations is a candidate for improvement. Looking more deeply at each operation, we find the following contributors to the slope:

  • Clear FIP

    • get_routers (9.667 usec/router)

    • _process_routers_if_compatible (1.496 msec/router)

      • _process_updated_router (1.455 msec/router)

        • process (1.454 msec/router)

          • process_internal_ports (151 usec/router)

          • process_external (1.304 msec/router)

            • iptables apply time: slope (0.513 msec/router)

            • process_external_gateway (0.207 msec/router)

            • FIP cleanup (0.551 msec/router)

  • Clear Gateway

    • get_routers (25.8 usec/router)

    • _process_routers_if_compatible (1.714 msec/router)

      • _process_update_router (1.700 msec/router)

        • process (1.700 msec/router)

          • process_internal_ports (92 usec/router)

          • process_external (0.99 msec/router)

            • process_external_gateway (0.99 msec/router)

              • unplug (0.857 msec/router)

        • iptables apply time: slope (0.614 msec/router)

  • Remove Interface

    • _process_routers_if_compatible (1.398 msec/router)

      • _process_update_router (1.372 msec/router)

        • process (1.372 msec/router)

          • process_internal_ports (0.685 sec/router)

            • old_ports_loop (0.586 msec/router)

          • iptables apply time: slope (0.538 msec/router)

  • Remove Router

    • _safe_router_removed (1.5 msec/router)

      • before_delete_callback (0.482 msec/router)

      • delete (1.055 msec/router)

        • process (0.865 msec/router)

          • process_internal_ports (0.168 msec/router)

          • process_external (0.200 msec/router)

          • iptables apply time: slope (0.496 msec/router)

        • namespace delete (0.195 msec/router)

As can be seen, improving execution time for iptables will impact a lot of operations (and this is a known issue). In addition there are several other functions to be dug into further to see what improvements can be made.

3.2.6. References

1

http://mathworld.wolfram.com/LeastSquaresFitting.html

2

https://review.openstack.org/#/c/103825/

3

https://bugs.launchpad.net/neutron/+bug/1494959