bgpvpn

bgpvpn

A bgpvpn resource contains a set of parameters to define a BGP-based VPN. BGP-based IP VPNs networks are widely used in the industry especially for enterprises. The networking BGP VPN project aims at supporting inter-connection between L3VPNs and Neutron resources, i.e. Networks, Routers and Ports.

Network v2

bgpvpn create

Create BGP VPN resource

openstack bgpvpn create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--project <project>]
    [--project-domain <project-domain>]
    [--name <name>]
    [--route-target <route-target>]
    [--import-target <import-target>]
    [--export-target <export-target>]
    [--route-distinguisher <route-distinguisher>]
    [--vni VNI]
    [--local-pref LOCAL_PREF]
    [--type {l2,l3}]
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--noindent

whether to disable indenting the JSON

--prefix <PREFIX>

add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--project <project>

Owner’s project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--name <name>

Name of the BGP VPN

--route-target <route-target>

Add Route Target to import/export list (repeat option for multiple Route Targets)

--import-target <import-target>

Add Route Target to import list (repeat option for multiple Route Targets)

--export-target <export-target>

Add Route Target to export list (repeat option for multiple Route Targets)

--route-distinguisher <route-distinguisher>

Add Route Distinguisher to the list of Route Distinguishers from which a Route Distinguishers will be picked from to advertise a VPN route (repeat option for multiple Route Distinguishers)

--vni <VNI>

VXLAN Network Identifier to be used for this BGPVPN when a VXLAN encapsulation is used

--local-pref <LOCAL_PREF>

Default BGP LOCAL_PREF to use in route advertisementstowards this BGPVPN.

--type <TYPE>

BGP VPN type selection between IP VPN (l3) and Ethernet VPN (l2) (default: l3)

This command is provided by the python-neutronclient plugin.

bgpvpn delete

Delete BGP VPN resource(s)

openstack bgpvpn delete <bgpvpn> [<bgpvpn> ...]
bgpvpn

BGP VPN(s) to delete (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn list

List BGP VPN resources

openstack bgpvpn list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--project <project>]
    [--project-domain <project-domain>]
    [--long]
    [--property <key=value>]
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--quote <QUOTE_MODE>

when to include quotes, defaults to nonnumeric

--noindent

whether to disable indenting the JSON

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--sort-column SORT_COLUMN

specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--project <project>

Owner’s project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--long

List additional fields in output

--property <key=value>

Filter property to apply on returned BGP VPNs (repeat to filter on multiple properties)

This command is provided by the python-neutronclient plugin.

bgpvpn set

Set BGP VPN properties

openstack bgpvpn set
    [--name <name>]
    [--route-target <route-target>]
    [--no-route-target]
    [--import-target <import-target>]
    [--no-import-target]
    [--export-target <export-target>]
    [--no-export-target]
    [--route-distinguisher <route-distinguisher>]
    [--no-route-distinguisher]
    [--vni VNI]
    [--local-pref LOCAL_PREF]
    <bgpvpn>
--name <name>

Name of the BGP VPN

--route-target <route-target>

Add Route Target to import/export list (repeat option for multiple Route Targets)

--no-route-target

Empty route target list

--import-target <import-target>

Add Route Target to import list (repeat option for multiple Route Targets)

--no-import-target

Empty import route target list

--export-target <export-target>

Add Route Target to export list (repeat option for multiple Route Targets)

--no-export-target

Empty export route target list

--route-distinguisher <route-distinguisher>

Add Route Distinguisher to the list of Route Distinguishers from which a Route Distinguishers will be picked from to advertise a VPN route (repeat option for multiple Route Distinguishers)

--no-route-distinguisher

Empty route distinguisher list

--vni <VNI>

VXLAN Network Identifier to be used for this BGPVPN when a VXLAN encapsulation is used

--local-pref <LOCAL_PREF>

Default BGP LOCAL_PREF to use in route advertisementstowards this BGPVPN.

bgpvpn

BGP VPN to update (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn show

Show information of a given BGP VPN

openstack bgpvpn show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <bgpvpn>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--noindent

whether to disable indenting the JSON

--prefix <PREFIX>

add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

bgpvpn

BGP VPN to display (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn unset

Unset BGP VPN properties

openstack bgpvpn unset
    [--route-target <route-target>]
    [--all-route-target]
    [--import-target <import-target>]
    [--all-import-target]
    [--export-target <export-target>]
    [--all-export-target]
    [--route-distinguisher <route-distinguisher>]
    [--all-route-distinguisher]
    [--vni VNI]
    [--local-pref LOCAL_PREF]
    <bgpvpn>
--route-target <route-target>

Remove Route Target from import/export list (repeat option for multiple Route Targets)

--all-route-target

Empty route target list

--import-target <import-target>

Remove Route Target from import list (repeat option for multiple Route Targets)

--all-import-target

Empty import route target list

--export-target <export-target>

Remove Route Target from export list (repeat option for multiple Route Targets)

--all-export-target

Empty export route target list

--route-distinguisher <route-distinguisher>

Remove Route Distinguisher from the list of Route Distinguishers from which a Route Distinguishers will be picked from to advertise a VPN route (repeat option for multiple Route Distinguishers)

--all-route-distinguisher

Empty route distinguisher list

--vni <VNI>

VXLAN Network Identifier to be used for this BGPVPN when a VXLAN encapsulation is used

--local-pref <LOCAL_PREF>

Default BGP LOCAL_PREF to use in route advertisementstowards this BGPVPN.

bgpvpn

BGP VPN to update (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn network association create

Create a BGP VPN network association

openstack bgpvpn network association create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--project <project>]
    [--project-domain <project-domain>]
    <bgpvpn>
    <network>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--noindent

whether to disable indenting the JSON

--prefix <PREFIX>

add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--project <project>

Owner’s project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

bgpvpn

BGP VPN to apply the network association (name or ID)

network

Network to associate the BGP VPN (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn network association delete

Delete a BGP VPN network association(s) for a given BGP VPN

openstack bgpvpn network association delete
    <network
    association
    ID>
    [<network association ID> ...]
    <bgpvpn>
network association ID

Network association ID(s) to remove

bgpvpn

BGP VPN the network association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn network association list

List BGP VPN network associations for a given BGP VPN

openstack bgpvpn network association list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--long]
    [--property <key=value>]
    <bgpvpn>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--quote <QUOTE_MODE>

when to include quotes, defaults to nonnumeric

--noindent

whether to disable indenting the JSON

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--sort-column SORT_COLUMN

specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--long

List additional fields in output

--property <key=value>

Filter property to apply on returned BGP VPNs (repeat to filter on multiple properties)

bgpvpn

BGP VPN listed associations belong to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn network association show

Show information of a given BGP VPN network association

openstack bgpvpn network association show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <network
    association
    ID>
    <bgpvpn>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--noindent

whether to disable indenting the JSON

--prefix <PREFIX>

add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

network association ID

Network association ID to look up

bgpvpn

BGP VPN the association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association create

Create a BGP VPN router association

openstack bgpvpn router association create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--project <project>]
    [--project-domain <project-domain>]
    [--advertise_extra_routes | --no-advertise_extra_routes]
    <bgpvpn>
    <router>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--noindent

whether to disable indenting the JSON

--prefix <PREFIX>

add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--project <project>

Owner’s project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--advertise_extra_routes

Routes will be advertised to the BGP VPN (default)

--no-advertise_extra_routes

Routes from the router will not be advertised to the BGP VPN

bgpvpn

BGP VPN to apply the router association (name or ID)

router

Router to associate the BGP VPN (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association delete

Delete a BGP VPN router association(s) for a given BGP VPN

openstack bgpvpn router association delete
    <router
    association
    ID>
    [<router association ID> ...]
    <bgpvpn>
router association ID

Router association ID(s) to remove

bgpvpn

BGP VPN the router association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association list

List BGP VPN router associations for a given BGP VPN

openstack bgpvpn router association list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--long]
    [--property <key=value>]
    <bgpvpn>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--quote <QUOTE_MODE>

when to include quotes, defaults to nonnumeric

--noindent

whether to disable indenting the JSON

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--sort-column SORT_COLUMN

specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--long

List additional fields in output

--property <key=value>

Filter property to apply on returned BGP VPNs (repeat to filter on multiple properties)

bgpvpn

BGP VPN listed associations belong to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association set

Set BGP VPN router association properties

openstack bgpvpn router association set
    [--advertise_extra_routes | --no-advertise_extra_routes]
    <router
    association
    ID>
    <bgpvpn>
--advertise_extra_routes

Routes will be advertised to the BGP VPN

--no-advertise_extra_routes

Routes from the router will not be advertised to the BGP VPN

router association ID

Router association ID to update

bgpvpn

BGP VPN the router association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association show

Show information of a given BGP VPN router association

openstack bgpvpn router association show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <router
    association
    ID>
    <bgpvpn>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--noindent

whether to disable indenting the JSON

--prefix <PREFIX>

add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

router association ID

Router association ID to look up

bgpvpn

BGP VPN the association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association unset

Unset BGP VPN router association properties

openstack bgpvpn router association unset
    [--advertise_extra_routes | --no-advertise_extra_routes]
    <router
    association
    ID>
    <bgpvpn>
--advertise_extra_routes

Routes from the router will not be advertised to the BGP VPN

--no-advertise_extra_routes

Routes will be advertised to the BGP VPN

router association ID

Router association ID to update

bgpvpn

BGP VPN the router association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association create

Create a BGP VPN port association

openstack bgpvpn port association create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--project <project>]
    [--project-domain <project-domain>]
    [--advertise-fixed-ips | --no-advertise-fixed-ips]
    [--prefix-route prefix=<cidr>[,local_pref=<integer>]]
    [--bgpvpn-route bgpvpn=<BGP VPN ID or name>[,local_pref=<integer>]]
    <bgpvpn>
    <port>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--noindent

whether to disable indenting the JSON

--prefix <PREFIX>

add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--project <project>

Owner’s project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--advertise-fixed-ips

Fixed IPs of the port will be advertised to the BGP VPN (default)

--no-advertise-fixed-ips

Fixed IPs of the port will not be advertised to the BGP VPN

--prefix-route prefix=<cidr>[,local_pref=<integer>]

Add prefix route in CIDR notation. Optionally, can control the value of the BGP LOCAL_PREF of the routes that will be advertised (repeat option for multiple prefix routes)

--bgpvpn-route bgpvpn=<BGP VPN ID or name>[,local_pref=<integer>]

Add BGP VPN route for route leaking. Optionally, can control the value of the BGP LOCAL_PREF of the routes that will be advertised (repeat option for multiple BGP VPN routes)

bgpvpn

BGP VPN to apply the port association (name or ID)

port

Port to associate the BGP VPN (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association delete

Delete a BGP VPN port association(s) for a given BGP VPN

openstack bgpvpn port association delete
    <port
    association
    ID>
    [<port association ID> ...]
    <bgpvpn>
port association ID

Port association ID(s) to remove

bgpvpn

BGP VPN the port association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association list

List BGP VPN port associations for a given BGP VPN

openstack bgpvpn port association list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--long]
    [--property <key=value>]
    <bgpvpn>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--quote <QUOTE_MODE>

when to include quotes, defaults to nonnumeric

--noindent

whether to disable indenting the JSON

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--sort-column SORT_COLUMN

specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--long

List additional fields in output

--property <key=value>

Filter property to apply on returned BGP VPNs (repeat to filter on multiple properties)

bgpvpn

BGP VPN listed associations belong to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association set

Set BGP VPN port association properties

openstack bgpvpn port association set
    [--advertise-fixed-ips | --no-advertise-fixed-ips]
    [--prefix-route prefix=<cidr>[,local_pref=<integer>]]
    [--bgpvpn-route bgpvpn=<BGP VPN ID or name>[,local_pref=<integer>]]
    [--no-prefix-route]
    [--no-bgpvpn-route]
    <port
    association
    ID>
    <bgpvpn>
--advertise-fixed-ips

Fixed IPs of the port will be advertised to the BGP VPN

--no-advertise-fixed-ips

Fixed IPs of the port will not be advertised to the BGP VPN

--prefix-route prefix=<cidr>[,local_pref=<integer>]

Add prefix route in CIDR notation. Optionally, can control the value of the BGP LOCAL_PREF of the routes that will be advertised (repeat option for multiple prefix routes)

--bgpvpn-route bgpvpn=<BGP VPN ID or name>[,local_pref=<integer>]

Add BGP VPN route for route leaking. Optionally, can control the value of the BGP LOCAL_PREF of the routes that will be advertised (repeat option for multiple BGP VPN routes)

--no-prefix-route

Empty prefix route list

--no-bgpvpn-route

Empty BGP VPN route list

port association ID

Port association ID to update

bgpvpn

BGP VPN the port association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association show

Show information of a given BGP VPN port association

openstack bgpvpn port association show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <port
    association
    ID>
    <bgpvpn>
-f <FORMATTER>, --format <FORMATTER>

the output format, defaults to table

-c COLUMN, --column COLUMN

specify the column(s) to include, can be repeated

--noindent

whether to disable indenting the JSON

--prefix <PREFIX>

add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

port association ID

Port association ID to look up

bgpvpn

BGP VPN the association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association unset

Unset BGP VPN port association properties

openstack bgpvpn port association unset
    [--advertise-fixed-ips | --no-advertise-fixed-ips]
    [--prefix-route <cidr>]
    [--bgpvpn-route <BGP VPN ID or name>]
    [--all-prefix-routes]
    [--all-bgpvpn-routes]
    <port
    association
    ID>
    <bgpvpn>
--advertise-fixed-ips

Fixed IPs of the port will not be advertised to the BGP VPN

--no-advertise-fixed-ips

Fixed IPs of the port will be advertised to the BGP VPN

--prefix-route <cidr>

Remove prefix route in CIDR notation (repeat option for multiple prefix routes)

--bgpvpn-route <BGP VPN ID or name>

Remove BGP VPN route (repeat option for multiple BGP VPN routes)

--all-prefix-routes

Empty prefix route list

--all-bgpvpn-routes

Empty BGP VPN route list

port association ID

Port association ID to update

bgpvpn

BGP VPN the port association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.