RefStack Quickstart

You can use docker for one-click setup or follow step-by-step instructions below. These instructions have been tested on Ubuntu 14 and 16 LTS.

Install API dependencies

sudo apt-get install git python-dev python-virtualenv libssl-dev build-essential libffi-dev
sudo apt-get install mysql-server python-mysqldb

Install RefStack UI dependencies

curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update && sudo apt-get install -y nodejs yarn

Setup the RefStack database

Log into MySQL:

mysql -u root -p

After authentication, create the database:

CREATE DATABASE refstack;

Create a refstack user:

CREATE USER 'refstack'@'localhost' IDENTIFIED BY '<your password>';

or using hash value for your password:

CREATE USER 'refstack'@'localhost' IDENTIFIED BY PASSWORD '<hash value of your password';

Grant privileges:

GRANT ALL PRIVILEGES ON refstack . * TO 'refstack'@'localhost';

Reload privileges:

FLUSH PRIVILEGES;

Exit MySQL:

quit

Clone the repository

git clone https://opendev.org/openinfra/refstack
cd refstack

Create virtual environment:

virtualenv .venv --system-site-package

Source to virtual environment:

source .venv/bin/activate

Update pip:

pip install -U pip

Install environment pre-requirements:

pip install gunicorn==18 # App server
pip install PyMySQL>=0.6.2,!=0.6.4 # python mysql connector

Install RefStack application

pip install .

Install needed RefStack UI library dependencies

yarn

API configuration file preparation

Make a copy of the sample config file (etc/refstack.conf.sample) and update it with the correct information of your environment. Examples of the config parameters with default values are included in the sample config file.

You should ensure that the following values in the config file are noted and properly set:

connection field in the [database]section.

For example, if the backend database is MySQL then update:

#connection = <None> to connection = mysql+pymysql://refstack:<your password>@x.x.x.x/refstack

ui_url field in the [DEFAULT] section.

This should be the URL that the UI can be accessed from. This will likely be in the form http://<your server IP>:8000 (8000 being the default port RefStack is hosted on). For example:

http://192.168.56.101:8000

api_url field in the [api] section.

This should be the URL that the API can be accessed from. This, in most cases, will be the same as the value for ui_url above.

app_dev_mode field in the [api] section.

Set this field to true if you aren’t creating a production-level RefStack deployment and are just trying things out or developing. Setting this field to true will allow you to quickly bring up both the API and UI together, with the UI files being served by a simple file server that comes with Pecan.

Create UI config file

From the RefStack project root directory, create a config.json file and specify your API endpoint inside this file. This will be something like {“refstackApiUrl”: “http://192.168.56.101:8000/v1”}:

cp refstack-ui/app/config.json.sample refstack-ui/app/config.json

Openstack OpenID endpoint configuration (optional)

If you are only interested in the uploading and viewing of result sets, then this section can be ignored. However, in order for user accounts and authentication to work, you need to make sure you are properly configured with an OpenStack OpenID endpoint. There are two options:

  • Use the official endpoint openstackid.org

  • Host your own openstackid endpoint

Since openstackid checks for valid top-level domains, in both options you will likely have to edit the hosts file of the system where your web-browser for viewing the RefStack site resides. On Linux systems, you would modify /etc/hosts, adding a line like the following:

<RefStack server IP>  <some valid domain name>

Example:

192.168.56.101  myrefstack.com

On Windows, you would do the same in %SystemRoot%\System32\drivers\etc\hosts. Alternatively, you can add a custom DNS record with the domain name mapping if possible.

Note that doing this requires you to modify the config.json file and the api_url and ui_url fields in refstack.conf to use this domain name instead of the IP.

Option 1 - Use Official Endpoint

Using the official site is probably the easiest as no additional configuration is needed besides the hosts file modifications as noted above. RefStack, by default, points to this endpoint.

Option 2 - Use Local Endpoint

Instructions for setting this up are outside of the scope of this doc, but you can get started at Openstackid project . You would then need to modify the openstack_openid_endpoint field in the [osid] section in refstack.conf to match the local endpoint.

Database sync

Check current revision:

refstack-manage --config-file /path/to/refstack.conf version

The response will show the current database revision. If the revision is None (indicating a clear database), the following command should be performed to upgrade the database to the latest revision:

Upgrade database to latest revision:

refstack-manage --config-file /path/to/refstack.conf upgrade --revision head

Check current revision:

refstack-manage --config-file /path/to/refstack.conf version
Now it should be some revision number other than `None`.

(Optional) Generate About Page Content

The RefStack About page is populated with HTML templates generated from our RST documentation files. If you want this information displayed, then run the following command from the root of the project.

./tools/convert-docs.py -o ./refstack-ui/app/components/about/templates ./doc/source/*.rst

Ignore any unknown directive errors.

Start RefStack

A simple way to start refstack is to just kick off gunicorn using the refstack-api executable:

refstack-api --env REFSTACK_OSLO_CONFIG=/path/to/refstack.conf

If app_dev_mode is set to true, this will launch both the UI and API.

Now available:

  • http://<your server IP>:8000/v1/results with response JSON including records consisting of <test run id> and <upload date> of the test runs. The default response is limited to one page of the most recent uploaded test run records. The number of records per page is configurable via the RefStack configuration file. Filtering parameters such as page, start_date, and end_date can also be used to specify the desired records. For example: GET http://<your server IP>:8000/v1/results?page=n will return page n of the data.

  • http://<your server IP>:8000/v1/results/<test run id> with response JSON including the detail test results of the specified <test run id>

(Optional) Configure Foundation organization and group

Overall RefStack admin access is given to users belonging to a “Foundation” organization. To become a Foundation admin, first a “Foundation” organization must be created. Note that you must have logged into RefStack at least once so that a user record for your account is created.

Log into MySQL:

mysql -u root -p

Create a group for the “Foundation” organization:

INSERT INTO refstack.group (id, name, created_at) VALUES (UUID(), 'Foundation Group', NOW());

Get the group ID for the group you just created:

SELECT id from refstack.group WHERE name = 'Foundation Group';

Get your OpenID:

SELECT openid from refstack.user WHERE email = '<your email>';

Add your user account to the previously created “Foundation” group.

Replace <Group ID> and <Your OpenID> with the values retrieved in the two previous steps:

INSERT INTO refstack.user_to_group (created_by_user, user_openid, group_id, created_at)    VALUES ('<Your OpenID>', '<Your OpenID>', '<Group ID>', NOW());

Create the actual “Foundation” organization using this group:

INSERT INTO refstack.organization (id, type, name, group_id, created_by_user, created_at)    VALUES (UUID(), 0, 'Foundation', '<Group ID>', '<Your OpenID>', NOW());

(Optional) Build documentation

The RefStack documentation can be build using following commands:

cd ~/refstack; source .venv/bin/activate
sudo apt-get install python3-dev python-tox
tox -e docs

The documentation files will be build under ~/refstack/build/sphinx.