VNF Forwarding Graph Advanced Usage Guide

This section cover some examples about advanced VNFFG usage guide in Tacker. Users should have some basic knowledge about VNFFG 1, before following this document.

Two VNFFGs go through one VNF

This scenario describes an example, where 2 VNFFGs go through one virtual network functions (VNFs). The VNFFG1 creates the chain from VNF1 and VNF2, and VNFFG2 creates the chain from VNF1. VNF1 belongs to both of VNFFGs.

Bellow example is the template of VNFFG1 2, in properties of Forwarding_path1, the path shows that VNFFG1 will go through VNF1 and VNF2.

tosca_definitions_version: tosca_simple_profile_for_nfv_1_0_0

description: Sample VNFFG template

topology_template:

  node_templates:

    Forwarding_path1:
      type: tosca.nodes.nfv.FP.TackerV2
      description: creates path (CP12->CP22)
      properties:
        id: 51
        policy:
          type: ACL
          criteria:
            - name: block_tcp
              classifier:
                network_src_port_id: 640dfd77-c92b-45a3-b8fc-22712de480e1
                destination_port_range: 80-1024
                ip_proto: 6
                ip_dst_prefix: 192.168.1.2/24
        path:
          - forwarder: VNFD1
            capability: CP12
          - forwarder: VNFD2
            capability: CP22

  groups:
    VNFFG1:
      type: tosca.groups.nfv.VNFFG
      description: HTTP to Corporate Net
      properties:
        vendor: tacker
        version: 1.0
        number_of_endpoints: 2
        dependent_virtual_link: [VL12,VL22]
        connection_point: [CP12,CP22]
        constituent_vnfs: [VNFD1,VNFD2]
      members: [Forwarding_path1]

Similar to the above example, VNFFG2 template 3 only create a chain that goes through VNF1.

tosca_definitions_version: tosca_simple_profile_for_nfv_1_0_0

description: Sample VNFFG template

topology_template:

  node_templates:

    Forwarding_path1:
      type: tosca.nodes.nfv.FP.TackerV2
      description: creates path (CP12->CP22)
      properties:
        id: 51
        policy:
          type: ACL
          criteria:
            - name: block_tcp
              classifier:
                network_src_port_id: 640dfd77-c92b-45a3-b8fc-22712de480e1
                destination_port_range: 8080-8080
                ip_proto: 6
                ip_dst_prefix: 192.168.1.2/24
        path:
          - forwarder: VNFD1
            capability: CP12

  groups:
    VNFFG1:
      type: tosca.groups.nfv.VNFFG
      description: HTTP to Corporate Net
      properties:
        vendor: tacker
        version: 1.0
        number_of_endpoints: 1
        dependent_virtual_link: [VL12]
        connection_point: [CP12]
        constituent_vnfs: [VNFD1]
      members: [Forwarding_path1]

For testing VNF Forwarding graph feature, we create 2 servers, http_client and http_server. The example uses net0 to create VNFFG on that network.

$ net_id=$(openstack network list | grep net0 | awk '{print $2}')
$ openstack server create --flavor m1.tiny --image cirros-0.4.0-x86_64-disk --nic net-id=$net_id http_client
$ openstack server create --flavor m1.tiny --image cirros-0.4.0-x86_64-disk --nic net-id=$net_id http_server

To get information about neutron ports of http_client and http_server that are used for classifying traffics, user can use openstack commands to get these information.

$ client_ip=$(openstack server list | grep http_client | grep -Eo '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+')
$ network_source_port_id=$(openstack port list | grep $client_ip | awk '{print $2}')
$ ip_dst=$(openstack server list | grep http_server | grep -Eo '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+')

Note

Please update parameters in classifier such as network_src_port_id, destination_port_range, ip_proto, ip_dst_prefix to meet your environment, which is described in VNFFG usage guide 4. Classifiers must be different to each others.

We assume that http_server and http_client are already created. VNF1 and VNF2 templates are shown in 5 and 6.

Once the OpenStack VIM is ready, firstly we can create VNFs (VNF1 and VNF2) from VNFD templates. For easily, we put all VNFD templates and VNFFGD templates in 7.

$ openstack vnf descriptor create --vnfd-file tosca-vnffg-vnfd1.yaml VNFD1
$ openstack vnf create --vnfd-name VNFD1 --vim-name VIM0 VNF1
$ openstack vnf descriptor create --vnfd-file tosca-vnffg-vnfd2.yaml VNFD2
$ openstack vnf create --vnfd-name VNFD2 --vim-name VIM0 VNF2

To create VNFFG, we should get the vnf id for VNF1 and VNF2:

$ openstack vnf list --fit-width
+-------------------------------+------+---------------------------+--------+-------------------------------+----------------------------------+
| ID                            | Name | Mgmt Url                  | Status | VIM ID                        | VNFD ID                          |
+-------------------------------+------+---------------------------+--------+-------------------------------+----------------------------------+
| 2ea1b577-89c1-478e-bedd-      | VNF2 | {"VDU1": "192.168.120.5"} | ACTIVE | 45fecf6f-9080-4e8b-953c-      | 69a4d2d4-9329-4807-9c59-09cb8d95 |
| 76f69951e840                  |      |                           |        | d9556e6ad2cb                  | c612                             |
| 45c6c5ee-517e-                | VNF1 | {"VDU1": "192.168.120.9"} | ACTIVE | 45fecf6f-9080-4e8b-953c-      | f4cb1509-c216-47a1-b76e-         |
| 4fc3-ad41-6e86c38d1a63        |      |                           |        | d9556e6ad2cb                  | e419f8ae6534                     |
+-------------------------------+------+---------------------------+--------+-------------------------------+----------------------------------+

Then we can create VNFFG1 that goes through VNF1, VNF2 and VNFFG2 that only goes through VNF1. We need to record vnf id to provide them in create VNFFG commands.

$ openstack vnf graph descriptor create --vnffgd-file tosca-vnffgd-sample.yaml VNFFGD1
$ openstack vnf graph descriptor create --vnffgd-file tosca-vnffgd-sample-VNF1.yaml VNFFGD2
$ openstack vnf graph create --vnffgd-name VNFFGD1 --vnf-mapping VNFD1:45c6c5ee-517e-4fc3-ad41-6e86c38d1a63,VNFD2:2ea1b577-89c1-478e-bedd-76f69951e840 VNFFG1
$ openstack vnf graph create --vnffgd-name VNFFGD2 --vnf-mapping VNFD1:45c6c5ee-517e-4fc3-ad41-6e86c38d1a63 VNFFG2

To check the VNFFG works fine, we can use list VNFFG and neutron port chain list to see what happens.

$ openstack vnf graph list
+--------------------------------------+--------+--------------------------------------+--------+
| ID                                   | Name   | VNFFGD ID                            | Status |
+--------------------------------------+--------+--------------------------------------+--------+
| 097dcd5d-b329-44da-9693-8e56ff3612e3 | VNFFG1 | 75f53d50-f79b-446b-b9bd-48e26c3a87d0 | ACTIVE |
| e33bc531-e124-432a-abf3-bec4f66ec15b | VNFFG2 | ead1a94f-2bf9-41fd-b543-8446cdbaac83 | ACTIVE |
+--------------------------------------+--------+--------------------------------------+--------+

$ openstack sfc port chain list --fit-width
+----------------------------+-------------------+----------------------------+----------------------------+----------------------------+----------+
| ID                         | Name              | Port Pair Groups           | Flow Classifiers           | Chain Parameters           | Chain ID |
+----------------------------+-------------------+----------------------------+----------------------------+----------------------------+----------+
| 03ca4afb-8fc9-4337-94a3-98 | VNFFG1-port-chain | [u'1f71e5b1-b8f2-4f1b-     | [u'46fd7fac-29f9-49cd-8959 | {u'symmetric': False,      |        1 |
| c90c5511a8                 |                   | 9c85-6a6f31cf9906',        | -42078d873487']            | u'correlation': u'mpls'}   |          |
|                            |                   | u'8be115b1-7422-417b-      |                            |                            |          |
|                            |                   | abc0-49b194d432cf']        |                            |                            |          |
| 24cbfa45-4033-4f95-aaa0-dd | VNFFG2-port-chain | [u'1f71e5b1-b8f2-4f1b-     | [u'6c94dd78-9cda-4891-ad71 | {u'symmetric': False,      |        2 |
| 690ee1e9af                 |                   | 9c85-6a6f31cf9906']        | -81a46354356e']            | u'correlation': u'mpls'}   |          |
+----------------------------+-------------------+----------------------------+----------------------------+----------------------------+----------+

We can see that, both of port chain will go through port pair group with the id 1f71e5b1-b8f2-4f1b-9c85-6a6f31cf9906, that is created from neutron port of VNF1.

If user delete VNFFG1, the VNFFG2 is not affected because the port pair group 1f71e5b1-b8f2-4f1b-9c85-6a6f31cf9906 is not deleted.

$ openstack vnf graph delete VNFFG1
All specified vnffg(s) deleted successfully
$ openstack vnf graph list
+--------------------------------------+--------+--------------------------------------+--------+
| ID                                   | Name   | VNFFGD ID                            | Status |
+--------------------------------------+--------+--------------------------------------+--------+
| e33bc531-e124-432a-abf3-bec4f66ec15b | VNFFG2 | ead1a94f-2bf9-41fd-b543-8446cdbaac83 | ACTIVE |
+--------------------------------------+--------+--------------------------------------+--------+
$ openstack sfc port chain list --fit-width
+----------------------------+-------------------+----------------------------+----------------------------+----------------------------+----------+
| ID                         | Name              | Port Pair Groups           | Flow Classifiers           | Chain Parameters           | Chain ID |
+----------------------------+-------------------+----------------------------+----------------------------+----------------------------+----------+
| 24cbfa45-4033-4f95-aaa0-dd | VNFFG2-port-chain | [u'1f71e5b1-b8f2-4f1b-     | [u'6c94dd78-9cda-4891-ad71 | {u'symmetric': False,      |        2 |
| 690ee1e9af                 |                   | 9c85-6a6f31cf9906']        | -81a46354356e']            | u'correlation': u'mpls'}   |          |
+----------------------------+-------------------+----------------------------+----------------------------+----------------------------+----------+

Footnotes

1

https://docs.openstack.org/tacker/latest/user/vnffg_usage_guide.html

2

https://github.com/openstack/tacker/blob/master/samples/tosca-templates/vnffgd/tosca-vnffgd-sample.yaml

3

https://github.com/openstack/tacker/blob/master/samples/tosca-templates/vnffgd/tosca-vnffgd-sample-VNF1.yaml

4

https://docs.openstack.org/tacker/latest/user/vnffg_usage_guide.html

5

https://github.com/openstack/tacker/blob/master/samples/tosca-templates/vnffgd/tosca-vnffg-vnfd1.yaml

6

https://github.com/openstack/tacker/blob/master/samples/tosca-templates/vnffgd/tosca-vnffg-vnfd2.yaml

7

https://github.com/openstack/tacker/blob/master/samples/tosca-templates/vnffgd