Install via Devstack

Overview

Devstack based installation requires local.conf file. This file contains different configuration options required for installation.

Tacker provides some sample local.conf templates which can be used for Devstack based Tacker installation. You can find them in ${TACKER_ROOT}/devstack directory in the tacker repository.

Devstack supports installation from different code branches by specifying branch name in your local.conf.

  • For latest version installation, use master branch.

  • For specific release based installation, use corresponding branch name. For ex, to install wallaby release, use stable/wallaby.

For installation, stack.sh script in Devstack should be run as a non-root user with sudo enabled. Add a separate user stack and granting relevant privileges is a good way to install via Devstack [1].

Hardware Requirements

We recommend that your system meets the following hardware requirements:

Note

These are reference values to install Openstack and Kubernetes as VIM which generally requires the most resources. In reality, more parameters affect required resources.

Criteria

Recommended

CPU

4 cores or more

RAM

16 GB or more

Storage

80 GB or more

Note

We recommend that you run DevStack in a VM, rather than on your bare-metal server. If you have to run devstack on a bare-metal server, It is recommended to use a server that has at least two network interfaces [2].

Install

Devstack installation script stack.sh expects local.conf.

So the first step of installing tacker is to clone Devstack and prepare your local.conf.

  1. Download DevStack

    Get Devstack via git, with specific branch optionally if you prefer, and go down to the directory.

    $ git clone https://opendev.org/openstack/devstack -b <branch-name>
$ cd devstack

  2. Enable tacker related Devstack plugins in local.conf file

    The local.conf can be created manually, or copied from Tacker repo [3]. If copied, rename it as local.conf.

    We have two choices for configuration basically:

    1. All-in-one mode

      All-in-one mode installs full Devstack environment including Tacker in one PC or Laptop.

      There are two examples for all-in-one mode:

      1. OpenStack as VIM.

        The example local.conf file for all-in-one mode with OpenStack is available at ${TACKER_ROOT}/devstack/local.conf.example.

        Refer below the contents of local.conf.example:

        [[local|localrc]]
############################################################
# Customize the following HOST_IP based on your installation
############################################################
HOST_IP=127.0.0.1

ADMIN_PASSWORD=devstack
MYSQL_PASSWORD=devstack
RABBIT_PASSWORD=devstack
SERVICE_PASSWORD=$ADMIN_PASSWORD
SERVICE_TOKEN=devstack

############################################################
# Customize the following section based on your installation
############################################################

# Pip
PIP_USE_MIRRORS=False
USE_GET_PIP=1

#OFFLINE=False
#RECLONE=True

# Logging
LOGFILE=$DEST/logs/stack.sh.log
VERBOSE=True
ENABLE_DEBUG_LOG_LEVEL=True
ENABLE_VERBOSE_LOG_LEVEL=True

# Neutron ML2 with OpenVSwitch
Q_PLUGIN=ml2
Q_AGENT=ovn

# Disable security groups
LIBVIRT_FIREWALL_DRIVER=nova.virt.firewall.NoopFirewallDriver

# Enable heat, networking-sfc, barbican and mistral
enable_plugin heat https://opendev.org/openstack/heat master
enable_plugin networking-sfc https://opendev.org/openstack/networking-sfc master
enable_plugin barbican https://opendev.org/openstack/barbican master
enable_plugin mistral https://opendev.org/openstack/mistral master

# Ceilometer
#CEILOMETER_PIPELINE_INTERVAL=300
CEILOMETER_EVENT_ALARM=True
enable_plugin ceilometer https://opendev.org/openstack/ceilometer master
enable_plugin aodh https://opendev.org/openstack/aodh master

# Blazar
enable_plugin blazar https://github.com/openstack/blazar.git master

# Fenix
enable_plugin fenix https://opendev.org/x/fenix.git master

# Tacker
enable_plugin tacker https://opendev.org/openstack/tacker master

enable_service n-novnc
enable_service n-cauth

disable_service tempest

[[post-config|/etc/neutron/dhcp_agent.ini]]
[DEFAULT]
enable_isolated_metadata = True

      2. Openstack and Kubernetes as VIM.

        The difference between all-in-one mode with Kubernetes is to deploy kuryr-kubernetes and octavia.

        The example local.conf for all-in-one mode with Kubernetes is available at ${TACKER_ROOT}/devstack/local.conf.kubernetes

        Refer below the contents of local.conf.kubernetes

        [[local|localrc]]
############################################################
# Customize the following HOST_IP based on your installation
############################################################
HOST_IP=127.0.0.1

ADMIN_PASSWORD=devstack
MYSQL_PASSWORD=devstack
RABBIT_PASSWORD=devstack
SERVICE_PASSWORD=$ADMIN_PASSWORD
SERVICE_TOKEN=devstack

############################################################
# Customize the following section based on your installation
############################################################

# Pip
PIP_USE_MIRRORS=False
USE_GET_PIP=1

#OFFLINE=False
#RECLONE=True

# Logging
LOGFILE=$DEST/logs/stack.sh.log
VERBOSE=True
ENABLE_DEBUG_LOG_LEVEL=True
ENABLE_VERBOSE_LOG_LEVEL=True

# Neutron ML2 with OpenVSwitch
Q_PLUGIN=ml2
Q_AGENT=ovn

# Disable security groups
LIBVIRT_FIREWALL_DRIVER=nova.virt.firewall.NoopFirewallDriver

# Enable neutron, heat, networking-sfc, barbican and mistral
enable_plugin neutron https://opendev.org/openstack/neutron master
enable_plugin heat https://opendev.org/openstack/heat master
enable_plugin networking-sfc https://opendev.org/openstack/networking-sfc master
enable_plugin barbican https://opendev.org/openstack/barbican master
enable_plugin mistral https://opendev.org/openstack/mistral master

# Ceilometer
#CEILOMETER_PIPELINE_INTERVAL=300
enable_plugin ceilometer https://opendev.org/openstack/ceilometer master
enable_plugin aodh https://opendev.org/openstack/aodh master

# Blazar
enable_plugin blazar https://github.com/openstack/blazar.git master

# Fenix
enable_plugin fenix https://opendev.org/x/fenix.git master

# Tacker
enable_plugin tacker https://opendev.org/openstack/tacker master

enable_service n-novnc
enable_service n-cauth

disable_service tempest

# Enable kuryr-kubernetes, docker, octavia
KUBERNETES_VIM=True
enable_plugin kuryr-kubernetes https://opendev.org/openstack/kuryr-kubernetes master
enable_plugin octavia https://opendev.org/openstack/octavia master
enable_plugin devstack-plugin-container https://opendev.org/openstack/devstack-plugin-container master
#KURYR_K8S_CLUSTER_IP_RANGE="10.0.0.0/24"

enable_service kubernetes-master
enable_service kuryr-kubernetes
enable_service kuryr-daemon

[[post-config|/etc/neutron/dhcp_agent.ini]]
[DEFAULT]
enable_isolated_metadata = True

[[post-config|$OCTAVIA_CONF]]
[controller_worker]
amp_active_retries=9999

        Note

        The above local.conf.kubernetes does not work on CentOS8. Because docker-ce is not supported on CentOS8.

    2. Standalone mode

      Standalone mode installs only Tacker environment with some mandatory OpenStack services. Nova, Neutron or other essential components are not included in this mode.

      The example local.conf for standalone mode is available at ${TACKER_ROOT}/devstack/local.conf.standalone

      Refer below the contents of local.conf.standalone

      [[local|localrc]]
############################################################
# Customize the following HOST_IP based on your installation
############################################################
HOST_IP=127.0.0.1
SERVICE_HOST=127.0.0.1

SERVICE_PASSWORD=devstack
ADMIN_PASSWORD=devstack
SERVICE_TOKEN=devstack
DATABASE_PASSWORD=root
RABBIT_PASSWORD=password
ENABLE_HTTPD_MOD_WSGI_SERVICES=True
KEYSTONE_USE_MOD_WSGI=True

# Logging
LOGFILE=$DEST/logs/stack.sh.log
VERBOSE=True
ENABLE_DEBUG_LOG_LEVEL=True
ENABLE_VERBOSE_LOG_LEVEL=True
GIT_BASE=${GIT_BASE:-https://opendev.org}

TACKER_MODE=standalone
USE_BARBICAN=True
enable_plugin networking-sfc ${GIT_BASE}/openstack/networking-sfc
enable_plugin barbican ${GIT_BASE}/openstack/barbican
enable_plugin mistral ${GIT_BASE}/openstack/mistral
enable_plugin tacker ${GIT_BASE}/openstack/tacker

  3. In CentOS environment install and start ovn services before executing stack.sh.

    $ sudo yum install -y centos-release-openstack-victoria
$ sudo yum install -y openvswitch
$ sudo yum install -y openvswitch-ovn-common
$ sudo yum install -y openvswitch-ovn-central
$ sudo yum install -y openvswitch-ovn-host
$ sudo systemctl start ovn-northd.service
$ sudo systemctl start ovn-controller.service
$ sudo systemctl start ovs-vswitchd.service
$ sudo systemctl start ovsdb-server.service

  4. Execute installation script

    After saving the local.conf, we can run stack.sh in the terminal to start installation.

    $ ./stack.sh

Footnotes