Inputs and outputs

In TaskFlow there are multiple ways to provide inputs for your tasks and flows and get information from them. This document describes one of them, that involves task arguments and results. There are also notifications, which allow you to get notified when a task or flow changes state. You may also opt to use the persistence layer itself directly.

Flow inputs and outputs

Tasks accept inputs via task arguments and provide outputs via task results (see arguments and results for more details). This is the standard and recommended way to pass data from one task to another. Of course not every task argument needs to be provided to some other task of a flow, and not every task result should be consumed by every task.

If some value is required by one or more tasks of a flow, but it is not provided by any task, it is considered to be flow input, and must be put into the storage before the flow is run. A set of names required by a flow can be retrieved via that flow’s requires property. These names can be used to determine what names may be applicable for placing in storage ahead of time and which names are not applicable.

All values provided by tasks of the flow are considered to be flow outputs; the set of names of such values is available via the provides property of the flow.

For example:

>>> class MyTask(task.Task):
...     def execute(self, **kwargs):
...         return 1, 2
...
>>> flow = linear_flow.Flow('test').add(
...     MyTask(requires='a', provides=('b', 'c')),
...     MyTask(requires='b', provides='d')
... )
>>> flow.requires
frozenset(['a'])
>>> sorted(flow.provides)
['b', 'c', 'd']

As you can see, this flow does not require b, as it is provided by the fist task.

Note

There is no difference between processing of Task and Retry inputs and outputs.

Engine and storage

The storage layer is how an engine persists flow and task details (for more in-depth details see persistence).

Inputs

As mentioned above, if some value is required by one or more tasks of a flow, but is not provided by any task, it is considered to be flow input, and must be put into the storage before the flow is run. On failure to do so MissingDependencies is raised by the engine prior to running:

>>> class CatTalk(task.Task):
...   def execute(self, meow):
...     print meow
...     return "cat"
...
>>> class DogTalk(task.Task):
...   def execute(self, woof):
...     print woof
...     return "dog"
...
>>> flo = linear_flow.Flow("cat-dog")
>>> flo.add(CatTalk(), DogTalk(provides="dog"))
<taskflow.patterns.linear_flow.Flow object at 0x...>
>>> engines.run(flo)
Traceback (most recent call last):
   ...
taskflow.exceptions.MissingDependencies:
taskflow.patterns.linear_flow.Flow: cat-dog;
2 requires ['meow', 'woof'] but no other entity produces said requirements

The recommended way to provide flow inputs is to use the store parameter of the engine helpers (run() or load()):

>>> class CatTalk(task.Task):
...   def execute(self, meow):
...     print meow
...     return "cat"
...
>>> class DogTalk(task.Task):
...   def execute(self, woof):
...     print woof
...     return "dog"
...
>>> flo = linear_flow.Flow("cat-dog")
>>> flo.add(CatTalk(), DogTalk(provides="dog"))
<taskflow.patterns.linear_flow.Flow object at 0x...>
>>> result = engines.run(flo, store={'meow': 'meow', 'woof': 'woof'})
meow
woof
>>> pprint(result)
{'dog': 'dog', 'meow': 'meow', 'woof': 'woof'}

You can also directly interact with the engine storage layer to add additional values, note that if this route is used you can’t use the helper method run(). Instead, you must activate the engine’s run method directly run():

>>> flo = linear_flow.Flow("cat-dog")
>>> flo.add(CatTalk(), DogTalk(provides="dog"))
<taskflow.patterns.linear_flow.Flow object at 0x...>
>>> eng = engines.load(flo, store={'meow': 'meow'})
>>> eng.storage.inject({"woof": "bark"})
>>> eng.run()
meow
bark

Outputs

As you can see from examples above, the run method returns all flow outputs in a dict. This same data can be fetched via fetch_all() method of the engines storage object. You can also get single results using the engines storage objects fetch() method.

For example:

>>> eng = engines.load(flo, store={'meow': 'meow', 'woof': 'woof'})
>>> eng.run()
meow
woof
>>> pprint(eng.storage.fetch_all())
{'dog': 'dog', 'meow': 'meow', 'woof': 'woof'}
>>> print(eng.storage.fetch("dog"))
dog