Support checking if chassis is alive

Support checking if chassis is alive

https://blueprints.launchpad.net/dragonflow/+spec/is-chassis-alive-support

Chassis is important to some functionalities, for example, segments support, router gateway. Dragonflow should provide a way to check if a chassis is active. So that other functionalities can use it.

Problem Description

Currently, Dragonflow doesn’t provide a way to check if a chassis is active. This causes several problems.

  • Once a chassis is registered in Dragonflow Northbound Database, there is no way to unregister it, even if it goes down. This fact will increase the unnecessary burden to the Dragonflow Northbound Database and OpenFlow in each Dragonflow controller.
  • The network segments support needs the information of if chassis is active. This involves the ml2 port binding and routed networks.
  • To support router gateway in native Dragonflow, the information of if chassis is active is required. Because, either centralized router gateway or distributed router gateway, needs to run in active chassis.

Proposed Change

Make Dragonflow controller report its timestamp to Dragonflow Northbound Database periodly. Add a method to tell if a chassis is active.

The implementation will under the assumption that all the nodes in OpenStack cloud have consistent time. This is a reliable assumption because it is recommended to use NTP(Network Time Protocol) to properly synchronize services among nodes, according to [1].

[1]http://docs.openstack.org/newton/install-guide-obs/environment-ntp.html

As distributed controller of SDN(software defined network), Dragonflow controller can be used to monitor and manage other local services, for example, Dragonflow L3 agent, metadata proxy, and other services in future. By using [2] from OpenStack Neutron, it is easy to start/stop/check the local services.

[2]neutron.agent.linux.external_process.ProcessManager

Dragonflow controller can report the status of local services to Dragonflow Northbound Database, when it reports its timestamp.

For the services that should run with neutron-server process, it could also be managed by ProcessManager mentioned above.

Configuration Impact

Add a new configuration option, chassis_down_time, which means that the chassis will be considered as down if it doesn’t report itself for such a long time. The default value of chassis_down_time will be 75 seconds, which should be at least more than twice of report_interval described below.

Add a new configuration option, report_interval. Dragonflow controller will report timestamp to Dragonflow Northbound Database by using this option as time interval. The default value of report_interval is 30 seconds, which should not cause big impact to the performance of Dragonflow Northbound Database.

NB Data Model Impact

Add a new field called timestamp to Chassis in Dragonflow Northbound Database. This field will not be exposed. The Chassis class in Dragonflow Northbound will provide a new method called is_active. The new method will compare timestamp of chassis and current time. If timestamp is older than current time, and the gap is greater than chassis_down_time, the method will return false.

Add a new field called service_status to Chassis in Dragonflow Northbound Database. The status of local services will be recorded in this field.

The new DB cli commands that are mentioned below will show the Chassis status according to the return value of this method. Administrator can then delete the stale Chassis.

Other functionalities, for example ml2 port binding, can avoid using the stale Chassis by checking the return value of this method. If the return value is false, ml2 can report error on port binding. The details depend on the implementation of other functionalities. This method just provides the possibility to do that.

Publisher Subscriber Impact

Dragonflow controller should silently ignore the update of timestamp. Actually, it should only concern about the IP address change of chassis once virtual tunnel port is implemented at [3].

[3]https://blueprints.launchpad.net/dragonflow/+spec/virtual-tunnel-port-support

Dragonflow DB CLI Impact

Dragonflow DB CLI should provide 2 commands.

  1. A command to list chassis, administrator can use this command to check all chassis in the OpenStack Cloud. Also, an optional parameter will be added to the command. The optional parameter will provide the ability to filter out the active chassis or stale chassis.
  2. A command to delete stale chassis. When administrator deletes chassis, the chassis delete event should be broadcasted to all Dragonflow controllers. Dragonflow controllers should clear local information of stale chassis when receive such event.

So that administrator can clean the stale chassis.

Dragonflow Applications Impact

None

Installed flows Impact

None

Implementation

Assignee(s)

Primary assignee:
xiaohhui

Work Items

  1. Make Dragonflow controller silently ignore the change of timestamp of chassis.
  2. Make Dragonflow controller manage services other than itself.
  3. Add configuration and make Dragonflow controller report to Dragonflow Northbound Database periodly.
  4. Add commands to Dragonflow DB CLI.
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.