[ English | Indonesia | Deutsch | English (United Kingdom) | русский | español ]
Beispiel für eine geroutete Umgebung¶
In diesem Abschnitt wird eine Beispielproduktionsumgebung für eine funktionierende OpenStack-Ansible-Bereitstellung (OSA) mit Hochverfügbarkeitsdiensten beschrieben, bei der Providernetzwerke und Verbindungen zwischen physischen Maschinen geroutet werden (Layer 3).
Diese Beispielumgebung weist die folgenden Merkmale auf:
Drei Infrastruktur (Kontrollebene) Hosts
Zwei Rechnerhosts
Ein NFS-Speichergerät
Ein Protokollaggregationshost
Mehrere Netzwerkschnittstellenkarten (Network Interface Cards, NIC), die als verbundene Paare für jeden Host konfiguriert sind
Komplettes Compute-Kit mit dem Telemetrie-Service (Ceilometer) im Lieferumfang enthalten, wobei NFS als Speicher-Backend für die Dienste Image (Glance) und Block Storage (Cinder) konfiguriert ist
Statische Routen werden hinzugefügt, um die Kommunikation zwischen den Verwaltungs-, Tunnel- und Speichernetzwerken jedes Pods zu ermöglichen. Die Gateway-Adresse ist die erste verwendbare Adresse innerhalb des Subnetzes jedes Netzwerks.
Netzwerkkonfiguration¶
Netzwerk CIDR / VLAN Zuweisungen¶
Die folgenden CIDR-Zuweisungen werden für diese Umgebung verwendet.
Netzwerk |
CIDR |
VLAN |
---|---|---|
POD 1 Verwaltungsnetzwerk |
172.29.236.0/24 |
10 |
POD 1 Tunnel (VXLAN) Netzwerk |
172.29.237.0/24 |
30 |
POD 1 Speichernetzwerk |
172.29.238.0/24 |
20 |
POD 2 Verwaltungsnetzwerk |
172.29.239.0/24 |
10 |
POD 2 Tunnel (VXLAN) Netzwerk |
172.29.240.0/24 |
30 |
POD 2-Speichernetzwerk |
172.29.241.0/24 |
20 |
POD 3 Verwaltungsnetzwerk |
172.29.242.0/24 |
10 |
POD 3 Tunnel (VXLAN) Netzwerk |
172.29.243.0/24 |
30 |
POD 3 Speichernetzwerk |
172.29.244.0/24 |
20 |
POD 4 Verwaltungsnetzwerk |
172.29.245.0/24 |
10 |
POD 4 Tunnel (VXLAN) Netzwerk |
172.29.246.0/24 |
30 |
POD 4 Speichernetzwerk |
172.29.247.0/24 |
20 |
IP-Zuweisungen¶
Die folgenden Hostnamen und IP-Adresszuweisungen werden für diese Umgebung verwendet.
Hostname |
Verwaltungs-IP |
Tunnel (VxLAN) IP |
Speicher-IP |
---|---|---|---|
lb_vip_adresse |
172.29.236.9 |
||
infra1 |
172.29.236.10 |
172.29.237.10 |
|
infra2 |
172.29.239.10 |
172.29.240.10 |
|
infra3 |
172.29.242.10 |
172.29.243.10 |
|
log1 |
172.29.236.11 |
||
NFS-Speicher |
172.29.244.15 |
||
compute1 |
172.29.245.10 |
172.29.246.10 |
172.29.247.10 |
compute2 |
172.29.245.11 |
172.29.246.11 |
172.29.247.11 |
Host-Netzwerkkonfiguration¶
Für jeden Host müssen die richtigen Netzwerkbrücken implementiert werden. Das Folgende ist die /etc/network/interfaces
Datei für `` infra1``.
Bemerkung
Wenn Ihre Umgebung nicht eth0
, sondern p1p1
oder einen anderen Namen hat, stellen Sie sicher, dass alle Verweise auf eth0
in allen Konfigurationsdateien durch den entsprechenden Namen ersetzt werden. Gleiches gilt für zusätzliche Netzwerkschnittstellen.
# This is a multi-NIC bonded configuration to implement the required bridges
# for OpenStack-Ansible. This illustrates the configuration of the first
# Infrastructure host and the IP addresses assigned should be adapted
# for implementation on the other hosts.
#
# After implementing this configuration, the host will need to be
# rebooted.
# Assuming that eth0/1 and eth2/3 are dual port NIC's we pair
# eth0 with eth2 and eth1 with eth3 for increased resiliency
# in the case of one interface card failing.
auto eth0
iface eth0 inet manual
bond-master bond0
bond-primary eth0
auto eth1
iface eth1 inet manual
bond-master bond1
bond-primary eth1
auto eth2
iface eth2 inet manual
bond-master bond0
auto eth3
iface eth3 inet manual
bond-master bond1
# Create a bonded interface. Note that the "bond-slaves" is set to none. This
# is because the bond-master has already been set in the raw interfaces for
# the new bond0.
auto bond0
iface bond0 inet manual
bond-slaves none
bond-mode active-backup
bond-miimon 100
bond-downdelay 200
bond-updelay 200
# This bond will carry VLAN and VXLAN traffic to ensure isolation from
# control plane traffic on bond0.
auto bond1
iface bond1 inet manual
bond-slaves none
bond-mode active-backup
bond-miimon 100
bond-downdelay 250
bond-updelay 250
# Container/Host management VLAN interface
auto bond0.10
iface bond0.10 inet manual
vlan-raw-device bond0
# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
auto bond1.30
iface bond1.30 inet manual
vlan-raw-device bond1
# Storage network VLAN interface (optional)
auto bond0.20
iface bond0.20 inet manual
vlan-raw-device bond0
# Container/Host management bridge
auto br-mgmt
iface br-mgmt inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
bridge_ports bond0.10
address 172.29.236.10
netmask 255.255.255.0
gateway 172.29.236.1
dns-nameservers 8.8.8.8 8.8.4.4
# OpenStack Networking VXLAN (tunnel/overlay) bridge
#
# The COMPUTE, NETWORK and INFRA nodes must have an IP address
# on this bridge.
#
auto br-vxlan
iface br-vxlan inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
bridge_ports bond1.30
address 172.29.237.10
netmask 255.255.252.0
# OpenStack Networking VLAN bridge
auto br-vlan
iface br-vlan inet manual
bridge_stp off
bridge_waitport 0
bridge_fd 0
bridge_ports bond1
# compute1 Network VLAN bridge
#auto br-vlan
#iface br-vlan inet manual
# bridge_stp off
# bridge_waitport 0
# bridge_fd 0
#
# For tenant vlan support, create a veth pair to be used when the neutron
# agent is not containerized on the compute hosts. 'eth12' is the value used on
# the host_bind_override parameter of the br-vlan network section of the
# openstack_user_config example file. The veth peer name must match the value
# specified on the host_bind_override parameter.
#
# When the neutron agent is containerized it will use the container_interface
# value of the br-vlan network, which is also the same 'eth12' value.
#
# Create veth pair, do not abort if already exists
# pre-up ip link add br-vlan-veth type veth peer name eth12 || true
# Set both ends UP
# pre-up ip link set br-vlan-veth up
# pre-up ip link set eth12 up
# Delete veth pair on DOWN
# post-down ip link del br-vlan-veth || true
# bridge_ports bond1 br-vlan-veth
# Storage bridge (optional)
#
# Only the COMPUTE and STORAGE nodes must have an IP address
# on this bridge. When used by infrastructure nodes, the
# IP addresses are assigned to containers which use this
# bridge.
#
auto br-storage
iface br-storage inet manual
bridge_stp off
bridge_waitport 0
bridge_fd 0
bridge_ports bond0.20
# compute1 Storage bridge
#auto br-storage
#iface br-storage inet static
# bridge_stp off
# bridge_waitport 0
# bridge_fd 0
# bridge_ports bond0.20
# address 172.29.247.10
# netmask 255.255.255.0
Bereitstellungskonfiguration¶
Umgebungslayout¶
Die Datei /etc/openstack_deploy/openstack_user_config.yml
definiert das Umgebungslayout.
Für jeden Pod muss eine Gruppe definiert werden, die alle Hosts innerhalb dieses Pods enthält.
Innerhalb definierter Provider-Netzwerke wird address_prefix` verwendet, um das Präfix des Schlüssels zu überschreiben, der jedem Host hinzugefügt wurde, der IP-Adressinformationen enthält. Dies sollte normalerweise entweder Container
, Tunnel
oder Speicher
sein. `` reference_group`` enthält den Namen einer definierten Pod-Gruppe und wird verwendet, um den Umfang jedes Provider-Netzwerks auf diese Gruppe zu beschränken.
Statische Routen werden hinzugefügt, um die Kommunikation von Provider-Netzwerken zwischen Pods zu ermöglichen.
Die folgende Konfiguration beschreibt das Layout für diese Umgebung.
---
cidr_networks:
pod1_container: 172.29.236.0/24
pod2_container: 172.29.237.0/24
pod3_container: 172.29.238.0/24
pod4_container: 172.29.239.0/24
pod1_tunnel: 172.29.240.0/24
pod2_tunnel: 172.29.241.0/24
pod3_tunnel: 172.29.242.0/24
pod4_tunnel: 172.29.243.0/24
pod1_storage: 172.29.244.0/24
pod2_storage: 172.29.245.0/24
pod3_storage: 172.29.246.0/24
pod4_storage: 172.29.247.0/24
used_ips:
- "172.29.236.1,172.29.236.50"
- "172.29.237.1,172.29.237.50"
- "172.29.238.1,172.29.238.50"
- "172.29.239.1,172.29.239.50"
- "172.29.240.1,172.29.240.50"
- "172.29.241.1,172.29.241.50"
- "172.29.242.1,172.29.242.50"
- "172.29.243.1,172.29.243.50"
- "172.29.244.1,172.29.244.50"
- "172.29.245.1,172.29.245.50"
- "172.29.246.1,172.29.246.50"
- "172.29.247.1,172.29.247.50"
global_overrides:
#
# The below domains name must resolve to an IP address
# in the CIDR specified in haproxy_keepalived_external_vip_cidr and
# haproxy_keepalived_internal_vip_cidr.
# If using different protocols (https/http) for the public/internal
# endpoints the two addresses must be different.
#
internal_lb_vip_address: internal-openstack.example.com
external_lb_vip_address: openstack.example.com
management_bridge: "br-mgmt"
provider_networks:
- network:
container_bridge: "br-mgmt"
container_type: "veth"
container_interface: "eth1"
ip_from_q: "pod1_container"
address_prefix: "management"
type: "raw"
group_binds:
- all_containers
- hosts
reference_group: "pod1_hosts"
is_management_address: true
# Containers in pod1 need routes to the container networks of other pods
static_routes:
# Route to container networks
- cidr: 172.29.236.0/22
gateway: 172.29.236.1
- network:
container_bridge: "br-mgmt"
container_type: "veth"
container_interface: "eth1"
ip_from_q: "pod2_container"
address_prefix: "management"
type: "raw"
group_binds:
- all_containers
- hosts
reference_group: "pod2_hosts"
is_management_address: true
# Containers in pod2 need routes to the container networks of other pods
static_routes:
# Route to container networks
- cidr: 172.29.236.0/22
gateway: 172.29.237.1
- network:
container_bridge: "br-mgmt"
container_type: "veth"
container_interface: "eth1"
ip_from_q: "pod3_container"
address_prefix: "management"
type: "raw"
group_binds:
- all_containers
- hosts
reference_group: "pod3_hosts"
is_management_address: true
# Containers in pod3 need routes to the container networks of other pods
static_routes:
# Route to container networks
- cidr: 172.29.236.0/22
gateway: 172.29.238.1
- network:
container_bridge: "br-mgmt"
container_type: "veth"
container_interface: "eth1"
ip_from_q: "pod4_container"
address_prefix: "management"
type: "raw"
group_binds:
- all_containers
- hosts
reference_group: "pod4_hosts"
is_management_address: true
# Containers in pod4 need routes to the container networks of other pods
static_routes:
# Route to container networks
- cidr: 172.29.236.0/22
gateway: 172.29.239.1
- network:
container_bridge: "br-vxlan"
container_type: "veth"
container_interface: "eth10"
ip_from_q: "pod1_tunnel"
address_prefix: "tunnel"
type: "vxlan"
range: "1:1000"
net_name: "vxlan"
group_binds:
- neutron_linuxbridge_agent
reference_group: "pod1_hosts"
# Containers in pod1 need routes to the tunnel networks of other pods
static_routes:
# Route to tunnel networks
- cidr: 172.29.240.0/22
gateway: 172.29.240.1
- network:
container_bridge: "br-vxlan"
container_type: "veth"
container_interface: "eth10"
ip_from_q: "pod2_tunnel"
address_prefix: "tunnel"
type: "vxlan"
range: "1:1000"
net_name: "vxlan"
group_binds:
- neutron_linuxbridge_agent
reference_group: "pod2_hosts"
# Containers in pod2 need routes to the tunnel networks of other pods
static_routes:
# Route to tunnel networks
- cidr: 172.29.240.0/22
gateway: 172.29.241.1
- network:
container_bridge: "br-vxlan"
container_type: "veth"
container_interface: "eth10"
ip_from_q: "pod3_tunnel"
address_prefix: "tunnel"
type: "vxlan"
range: "1:1000"
net_name: "vxlan"
group_binds:
- neutron_linuxbridge_agent
reference_group: "pod3_hosts"
# Containers in pod3 need routes to the tunnel networks of other pods
static_routes:
# Route to tunnel networks
- cidr: 172.29.240.0/22
gateway: 172.29.242.1
- network:
container_bridge: "br-vxlan"
container_type: "veth"
container_interface: "eth10"
ip_from_q: "pod4_tunnel"
address_prefix: "tunnel"
type: "vxlan"
range: "1:1000"
net_name: "vxlan"
group_binds:
- neutron_linuxbridge_agent
reference_group: "pod4_hosts"
# Containers in pod4 need routes to the tunnel networks of other pods
static_routes:
# Route to tunnel networks
- cidr: 172.29.240.0/22
gateway: 172.29.243.1
- network:
container_bridge: "br-vlan"
container_type: "veth"
container_interface: "eth12"
host_bind_override: "eth12"
type: "flat"
net_name: "flat"
group_binds:
- neutron_linuxbridge_agent
- network:
container_bridge: "br-vlan"
container_type: "veth"
container_interface: "eth11"
type: "vlan"
range: "101:200,301:400"
net_name: "vlan"
group_binds:
- neutron_linuxbridge_agent
- network:
container_bridge: "br-storage"
container_type: "veth"
container_interface: "eth2"
ip_from_q: "pod1_storage"
address_prefix: "storage"
type: "raw"
group_binds:
- glance_api
- cinder_api
- cinder_volume
- nova_compute
reference_group: "pod1_hosts"
# Containers in pod1 need routes to the storage networks of other pods
static_routes:
# Route to storage networks
- cidr: 172.29.244.0/22
gateway: 172.29.244.1
- network:
container_bridge: "br-storage"
container_type: "veth"
container_interface: "eth2"
ip_from_q: "pod2_storage"
address_prefix: "storage"
type: "raw"
group_binds:
- glance_api
- cinder_api
- cinder_volume
- nova_compute
reference_group: "pod2_hosts"
# Containers in pod2 need routes to the storage networks of other pods
static_routes:
# Route to storage networks
- cidr: 172.29.244.0/22
gateway: 172.29.245.1
- network:
container_bridge: "br-storage"
container_type: "veth"
container_interface: "eth2"
ip_from_q: "pod3_storage"
address_prefix: "storage"
type: "raw"
group_binds:
- glance_api
- cinder_api
- cinder_volume
- nova_compute
reference_group: "pod3_hosts"
# Containers in pod3 need routes to the storage networks of other pods
static_routes:
# Route to storage networks
- cidr: 172.29.244.0/22
gateway: 172.29.246.1
- network:
container_bridge: "br-storage"
container_type: "veth"
container_interface: "eth2"
ip_from_q: "pod4_storage"
address_prefix: "storage"
type: "raw"
group_binds:
- glance_api
- cinder_api
- cinder_volume
- nova_compute
reference_group: "pod4_hosts"
# Containers in pod4 need routes to the storage networks of other pods
static_routes:
# Route to storage networks
- cidr: 172.29.244.0/22
gateway: 172.29.247.1
###
### Infrastructure
###
pod1_hosts: &pod1
infra1:
ip: 172.29.236.10
pod2_hosts: &pod2
infra2:
ip: 172.29.239.10
pod3_hosts: &pod3
infra3:
ip: 172.29.242.10
pod4_hosts: &pod4
compute1:
ip: 172.29.245.10
compute2:
ip: 172.29.245.11
# galera, memcache, rabbitmq, utility
shared-infra_hosts: &controllers
<<: *pod1
<<: *pod2
<<: *pod3
# repository (apt cache, python packages, etc)
repo-infra_hosts: *controllers
# load balancer
# Ideally the load balancer should not use the Infrastructure hosts.
# Dedicated hardware is best for improved performance and security.
haproxy_hosts: *controllers
###
### OpenStack
###
# keystone
identity_hosts: *controllers
# cinder api services
storage-infra_hosts: *controllers
# glance
# The settings here are repeated for each infra host.
# They could instead be applied as global settings in
# user_variables, but are left here to illustrate that
# each container could have different storage targets.
image_hosts:
infra1:
ip: 172.29.236.11
container_vars:
limit_container_types: glance
glance_remote_client:
- what: "172.29.244.15:/images"
where: "/var/lib/glance/images"
type: "nfs"
options: "_netdev,auto"
infra2:
ip: 172.29.236.12
container_vars:
limit_container_types: glance
glance_remote_client:
- what: "172.29.244.15:/images"
where: "/var/lib/glance/images"
type: "nfs"
options: "_netdev,auto"
infra3:
ip: 172.29.236.13
container_vars:
limit_container_types: glance
glance_remote_client:
- what: "172.29.244.15:/images"
where: "/var/lib/glance/images"
type: "nfs"
options: "_netdev,auto"
# nova api, conductor, etc services
compute-infra_hosts: *controllers
# heat
orchestration_hosts: *controllers
# horizon
dashboard_hosts: *controllers
# neutron server, agents (L3, etc)
network_hosts: *controllers
# ceilometer (telemetry data collection)
metering-infra_hosts: *controllers
# aodh (telemetry alarm service)
metering-alarm_hosts: *controllers
# gnocchi (telemetry metrics storage)
metrics_hosts: *controllers
# nova hypervisors
compute_hosts: *pod4
# ceilometer compute agent (telemetry data collection)
metering-compute_hosts: *pod4
# cinder volume hosts (NFS-backed)
# The settings here are repeated for each infra host.
# They could instead be applied as global settings in
# user_variables, but are left here to illustrate that
# each container could have different storage targets.
storage_hosts:
infra1:
ip: 172.29.236.11
container_vars:
cinder_backends:
limit_container_types: cinder_volume
nfs_volume:
volume_backend_name: NFS_VOLUME1
volume_driver: cinder.volume.drivers.nfs.NfsDriver
nfs_mount_options: "rsize=65535,wsize=65535,timeo=1200,actimeo=120"
nfs_shares_config: /etc/cinder/nfs_shares
shares:
- ip: "172.29.244.15"
share: "/vol/cinder"
infra2:
ip: 172.29.236.12
container_vars:
cinder_backends:
limit_container_types: cinder_volume
nfs_volume:
volume_backend_name: NFS_VOLUME1
volume_driver: cinder.volume.drivers.nfs.NfsDriver
nfs_mount_options: "rsize=65535,wsize=65535,timeo=1200,actimeo=120"
nfs_shares_config: /etc/cinder/nfs_shares
shares:
- ip: "172.29.244.15"
share: "/vol/cinder"
infra3:
ip: 172.29.236.13
container_vars:
cinder_backends:
limit_container_types: cinder_volume
nfs_volume:
volume_backend_name: NFS_VOLUME1
volume_driver: cinder.volume.drivers.nfs.NfsDriver
nfs_mount_options: "rsize=65535,wsize=65535,timeo=1200,actimeo=120"
nfs_shares_config: /etc/cinder/nfs_shares
shares:
- ip: "172.29.244.15"
share: "/vol/cinder"
Umgebungsanpassungen¶
Die optional bereitgestellten Dateien in /etc/openstack_deploy/env.d
ermöglichen die Anpassung von Ansible-Gruppen. Dadurch kann der Deployer festlegen, ob die Dienste in einem Container (Standard) oder auf dem Host (auf Metall) ausgeführt werden.
Für diese Umgebung wird das cinder-volume
in einem Container auf den Infrastrukturhosts ausgeführt. Um dies zu erreichen, implementieren Sie /etc/openstack_deploy/env.d/cinder.yml
mit folgendem Inhalt:
---
# This file contains an example to show how to set
# the cinder-volume service to run in a container.
#
# Important note:
# When using LVM or any iSCSI-based cinder backends, such as NetApp with
# iSCSI protocol, the cinder-volume service *must* run on metal.
# Reference: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1226855
container_skel:
cinder_volumes_container:
properties:
is_metal: false
You can also declare a custom group for each pod that will also include all containers from hosts that belong to this pod. This might be handy if you want to define some variable for all hosts in the pod using group_variables.
For that create /etc/openstack_deploy/env.d/pod.yml
with the following content:
---
component_skel:
pod1_containers:
belongs_to:
- pod1_all
pod1_hosts:
belongs_to:
- pod1_all
pod2_containers:
belongs_to:
- pod2_all
pod2_hosts:
belongs_to:
- pod2_all
pod3_containers:
belongs_to:
- pod3_all
pod3_hosts:
belongs_to:
- pod3_all
pod4_containers:
belongs_to:
- pod3_all
pod4_hosts:
belongs_to:
- pod3_all
container_skel:
pod1_containers:
properties:
is_nest: True
pod2_containers:
properties:
is_nest: True
pod3_containers:
properties:
is_nest: True
pod4_containers:
properties:
is_nest: True
Above example will create following groups:
podN_hosts
which will contain only bare metal nodes
podN_containers
that will contain all containers that are spawned onbare metal nodes, that are part of the pod.
podN_all
that will contain podN_hosts and podN_containers members
Benutzervariablen¶
Die Datei /etc/openstack_deploy/user_variables.yml
definiert die globalen Überschreibungen für die Standardvariablen.
Implementieren Sie für diese Umgebung den Lastenausgleich auf den Infrastrukturhosts. Stellen Sie sicher, dass keepalived auch mit HAProxy in /etc/ openstack_deploy/user_variables.yml
mit folgendem Inhalt konfiguriert ist.
---
# This file contains an example of the global variable overrides
# which may need to be set for a production environment.
# These variables must be defined when external_lb_vip_address or
# internal_lb_vip_address is set to FQDN.
## Load Balancer Configuration (haproxy/keepalived)
haproxy_keepalived_external_vip_cidr: "<external_vip_address>/<netmask>"
haproxy_keepalived_internal_vip_cidr: "172.29.236.9/32"
haproxy_keepalived_external_interface: ens2
haproxy_keepalived_internal_interface: br-mgmt