[ English | English (United Kingdom) | español | Indonesia | русский | Deutsch ]
Security settings¶
This chapter contains information to configure specific security settings for your OpenStack-Ansible cloud.
For understanding security design, please see Security.
[ English | English (United Kingdom) | español | Indonesia | русский | Deutsch ]
Securing services with SSL certificates¶
The OpenStack Security Guide recommends providing secure communication between various services in an OpenStack deployment. The OpenStack-Ansible project currently offers the ability to configure SSL certificates for secure communication between services:
All public endpoints reside behind haproxy, resulting in the only certificate management for externally visible https services are those for haproxy. Certain internal services such as RabbitMQ also require proper SSL configuration.
When deploying with OpenStack-Ansible, you can either use self-signed certificates that are generated during the deployment process or provide SSL certificates, keys, and CA certificates from your own trusted certificate authority. Highly secured environments use trusted, user-provided certificates for as many services as possible.
Nota
Perform all SSL certificate configuration in
/etc/openstack_deploy/user_variables.yml
file. Do not edit the playbooks
or roles themselves.
Openstack-Ansible uses an ansible role ansible_role_pki as a general tool to manage and install self-signed and user provided certificates.
Nota
The openstack-ansible example configurations are designed to be minimal
examples and in test or development use-cases will set external_lb_vip_address
to the IP address of the haproxy external endpoint. For a production
deployment it is advised to set external_lb_vip_address
to be
the FQDN which resolves via DNS to the IP of the external endpoint.
Self-signed certificates¶
Self-signed certificates enable you to start quickly and encrypt data in transit. However, they do not provide a high level of trust for public endpoints in highly secure environments. By default, self-signed certificates are used in OpenStack-Ansible. When self-signed certificates are used, certificate verification is automatically disabled.
Self-signed certificates can play an important role in securing internal services within the Openstack-Ansible deployment, as they can only be issued by the private CA associated with the deployment. Using mutual TLS between backend services such as RabbitMQ and MariaDB with self-signed certificates and a robust CA setup can ensure that only correctly authenticated clients can connect to these internal services.
Generating and regenerating self-signed certificates¶
Self-signed certificates are generated for each service during the first run of the playbook.
To regenerate a new self-signed certificate for a service, you must set
the <servicename>_pki_regen_cert
variable to true in one of the
following ways:
To force a self-signed certificate to regenerate, you can pass the variable to
openstack-ansible
on the command line:# openstack-ansible -e "haproxy_pki_regen_cert=true" haproxy-install.yml
To force a self-signed certificate to regenerate with every playbook run, set the appropriate regeneration option to
true
. For example, if you have already run thehaproxy
playbook, but you want to regenerate the self-signed certificate, set thehaproxy_pki_regen_cert
variable totrue
in the/etc/openstack_deploy/user_variables.yml
file:haproxy_pki_regen_cert: true
Generating and regenerating self-signed user certificates¶
Self-signed user certificates are generated but not installed for services outside of Openstack ansible. These user certificates are signed by the same self-signed certificate authority as is used by openstack services but are intended to be used by user applications.
To generate user certificates, define a variable with the prefix
user_pki_certificates_
in the /etc/openstack_deploy/user_variables.yml
file.
Example
user_pki_certificates_example:
- name: "example"
provider: ownca
cn: "example.com"
san: "DNS:example.com,IP:x.x.x.x"
signed_by: "{{ openstack_pki_service_intermediate_cert_name }}"
key_usage:
- digitalSignature
- keyAgreement
extended_key_usage:
- serverAuth
Generate the certificate with the following command:
# openstack-ansible certificate-generate.yml
To regenerate a new self-signed certificate for a service, you must set
the user_pki_regen_cert
variable to true in one of the
following ways:
To force a self-signed certificate to regenerate, you can pass the variable to
openstack-ansible
on the command line:# openstack-ansible -e "user_pki_regen_cert=true" certificate-generate.yml
To force a self-signed certificate to regenerate with every playbook run, set the
user_pki_regen_cert
variable totrue
in the/etc/openstack_deploy/user_variables.yml
file:user_pki_regen_cert: true
User-provided certificates¶
For added trust in highly secure environments, you can provide your own SSL certificates, keys, and CA certificates. Acquiring certificates from a trusted certificate authority is outside the scope of this document, but the Certificate Management section of the Linux Documentation Project explains how to create your own certificate authority and sign certificates.
Use the following process to deploy user-provided SSL certificates in OpenStack-Ansible:
Copy your SSL certificate, key, and CA certificate files to the deployment host.
Specify the path to your SSL certificate, key, and CA certificate in the
/etc/openstack_deploy/user_variables.yml
file.Run the playbook for that service.
HAProxy example¶
The variables to set which provide the path on the deployment node to the certificates for HAProxy configuration are:
haproxy_user_ssl_cert: /etc/openstack_deploy/ssl/example.com.crt
haproxy_user_ssl_key: /etc/openstack_deploy/ssl/example.com.key
haproxy_user_ssl_ca_cert: /etc/openstack_deploy/ssl/ExampleCA.crt
RabbitMQ example¶
To deploy user-provided certificates for RabbitMQ,
copy the certificates to the deployment host, edit
the /etc/openstack_deploy/user_variables.yml
file and set the following
three variables:
rabbitmq_user_ssl_cert: /etc/openstack_deploy/ssl/example.com.crt
rabbitmq_user_ssl_key: /etc/openstack_deploy/ssl/example.com.key
rabbitmq_user_ssl_ca_cert: /etc/openstack_deploy/ssl/ExampleCA.crt
Then, run the playbook to apply the certificates:
# openstack-ansible rabbitmq-install.yml
The playbook deploys your user-provided SSL certificate, key, and CA certificate to each RabbitMQ container.
The process is identical for the other services. Replace rabbitmq in the preceding configuration variables with horizon, haproxy, or keystone, and then run the playbook for that service to deploy user-provided certificates to those services.
Certbot certificates¶
The HAProxy ansible role supports using certbot to automatically deploy trusted SSL certificates for the public endpoint. Each HAProxy server will individually request a SSL certificate using certbot.
Certbot defaults to using LetsEncrypt as the Certificate Authority, other
Certificate Authorities can be used by setting the
haproxy_ssl_letsencrypt_certbot_server
variable in the
/etc/openstack_deploy/user_variables.yml
file:
haproxy_ssl_letsencrypt_certbot_server: "https://acme-staging-v02.api.letsencrypt.org/directory"
The http-01 type challenge is used by certbot to deploy certificates so it is required that the public endpoint is accessible directly by the Certificate Authority.
Deployment of certificates using LetsEncrypt has been validated for openstack-ansible using Ubuntu Jammy. Other distributions should work but are not tested.
To deploy certificates with certbot, add the following to
/etc/openstack_deploy/user_variables.yml
to enable the
certbot function in the haproxy ansible role, and to
create a new backend service called certbot
to service
http-01 challenge requests.
haproxy_ssl: true
haproxy_ssl_letsencrypt_enable: True
haproxy_ssl_letsencrypt_email: "email.address@example.com"
TLS for Haproxy Internal VIP¶
As well as load balancing public endpoints, haproxy is also used to load balance internal connections.
By default, OpenStack-Ansible does not secure connections to the internal VIP.
To enable this you must set the following variables in the
/etc/openstack_deploy/user_variables.yml
file:
openstack_service_adminuri_proto: https
openstack_service_internaluri_proto: https
haproxy_ssl_all_vips: true
Run all playbooks to configure haproxy and openstack services.
When enabled haproxy will use the same TLS certificate on all interfaces (internal and external). It is not currently possible in OpenStack-Ansible to use different self-signed or user-provided TLS certificates on different haproxy interfaces.
The only way to use a different TLS certificates on the internal and external VIP is to use certbot.
Enabling TLS on the internal VIP for existing deployments will cause some downtime, this is because haproxy only listens on a single well known port for each OpenStack service and OpenStack services are configured to use http or https. This means once haproxy is updated to only accept HTTPS connections, the OpenStack services will stop working until they are updated to use HTTPS.
To avoid downtime, it is recommended to enable
openstack_service_accept_both_protocols
until all services are configured
correctly. It allows haproxy frontends to listen on both HTTP and HTTPS.
TLS for Haproxy Backends¶
Communication between haproxy and service backends can be encrypted. Currently it is disabled by default. It can be enabled for all services by setting the following variable:
openstack_service_backend_ssl: True
There is also an option to enable it only for individual services:
keystone_backend_ssl: True
neutron_backend_ssl: True
By default, self-signed certificates will be used to secure traffic but user-provided certificates are also supported.
TLS for Live Migrations¶
Live migration of VM’s using SSH is deprecated and the OpenStack Nova Docs recommends using the more secure native TLS method supported by QEMU. The default live migration method used by OpenStack-Ansible has been updated to use TLS migrations.
QEMU-native TLS requires all compute hosts to accept TCP connections on port 16514 and port range 49152 to 49261.
It is not possible to have a mixed estate of some compute nodes using SSH and some using TLS for live migrations, as this would prevent live migrations between the compute nodes.
There are no issues enabling TLS live migration during an OpenStack upgrade, as long as you do not need to live migrate instances during the upgrade. If you you need to live migrate instances during an upgrade, enable TLS live migrations before or after the upgrade.
To force the use of SSH instead of TLS for live migrations you must set the
nova_libvirtd_listen_tls
variable to 0
in the
/etc/openstack_deploy/user_variables.yml
file:
nova_libvirtd_listen_tls: 0
TLS for VNC¶
When using VNC for console access there are 3 connections to secure, client to haproxy, haproxy to noVNC Proxy and noVNC Proxy to Compute nodes. The OpenStack Nova Docs for remote console access cover console security in much more detail.
In OpenStack-Ansible TLS to haproxy is configured in haproxy, TLS from haproxy to noVNC is not currently enabled and TLS from nVNC to Compute nodes is enabled by default.
Changes will not apply to any existing running guests on the compute node, so this configuration should be done before launching any instances. For existing deployments it is recommended that you migrate instances off the compute node before enabling.
To help with the transition from unencrypted VNC to VeNCrypt, initially noVNC proxy auth scheme allows for both encrypted and unencrypted sessions using the variable nova_vencrypt_auth_scheme. This will be restricted to VeNCrypt only in future versions of OpenStack-Ansible.
nova_vencrypt_auth_scheme: "vencrypt,none"
To not encrypt data from noVNC proxy to Compute nodes you must set the
nova_qemu_vnc_tls
variable to 0
in the
/etc/openstack_deploy/user_variables.yml
file:
nova_qemu_vnc_tls: 0
[ English | English (United Kingdom) | español | Indonesia | русский | Deutsch ]
Security Headers¶
Security headers are HTTP headers that can be used to increase the security of a web application by restricting what modern browsers are able to run.
In OpenStack-Ansible, security headers are implemented in haproxy as all the public endpoints reside behind it.
The following headers are enabled by default on all the haproxy interfaces that implement TLS, but only for the Horizon service. The security headers can be implemented on other haproxy services, but only services used by browsers will make use of the headers.
HTTP Strict Transport Security¶
The OpenStack TLS Security Guide recommends that all production deployments use HTTP strict transport security (HSTS).
By design, this header is difficult to disable once set. It is recommended that during testing you set a short time of 1 day and after testing increase the time to 1 year.
To change the default max age to 1 day, override the variable
haproxy_security_headers_max_age
in the
/etc/openstack_deploy/user_variables.yml
file:
haproxy_security_headers_max_age: 86400
If you would like your domain included in the HSTS preload list, which is built
into browsers, before submitting your request to be added to the HSTS preload
list you must add the preload
token to your response header. The preload
token indicates to the maintainers of HSTS preload list that you are happy to
have your site included.
- "http-response set-header Strict-Transport-Security \"max-age={{ haproxy_security_headers_max_age }}; includeSubDomains; preload;\""
X-Content-Type-Options¶
The X-Content-Type-Options
header prevents MIME type sniffing.
This functionality can be changed by overriding the list of headers in
haproxy_security_headers
variable in the
/etc/openstack_deploy/user_variables.yml
file.
Referrer Policy¶
The Referrer-Policy
header controls how much referrer information is sent
with requests. It defaults to same-origin
, which does not send the origin
path for cross-origin requests.
This functionality can be changed by overriding the list of headers in
haproxy_security_headers
variable in the
/etc/openstack_deploy/user_variables.yml
file.
Permission Policy¶
The Permissions-Policy
header allows you to selectively enable, disable or
modify the use of browser features and APIs, previously known as Feature Policy.
By default this header is set to block access to all features apart from the following from the same origin; fullscreen, clipboard read, clipboard write and spatial navigation.
This functionality can be changed by overriding the list of headers in
haproxy_security_headers
variable in the
/etc/openstack_deploy/user_variables.yml
file.
Content Security Policy (CSP)¶
The Content-Security-Policy
header allows you to control what resources a
browser is allowed to load for a given page, which helps to mitigate the risks
from Cross-Site Scripting (XSS) and data injection attacks.
By default, the Content Security Policy (CSP) enables a minimum set of resources
to allow Horizon to work, which includes access the Nova console. If you require
access to other resources these can be set by overriding the
haproxy_security_headers_csp
variable in the
/etc/openstack_deploy/user_variables.yml
file.
Report Only¶
Implementing CSP could lead to broken content if a browser is blocked from
accessing certain resources, therefore it is recommended that when testing CSP
you use the Content-Security-Policy-Report-Only
header, instead of
Content-Security-Policy
, this reports CSP violations to the browser console,
but does not enforce the policy.
To set the CSP policy to report only by overriding the
haproxy_security_headers_csp_report_only
variable to True
in the
/etc/openstack_deploy/user_variables.yml
file:
haproxy_security_headers_csp_report_only: True
Reporting Violations¶
It is recommended that you monitor attempted CSP violations in production, this
is achieved by setting the report-uri
and report-to
tokens.
Federated Login¶
When using federated login you will need to override the default Content
Security Policy to allow access to your authorisation server by overriding the
haproxy_horizon_csp
variable in the
/etc/openstack_deploy/user_variables.yml
file:
haproxy_horizon_csp: >
http-response set-header Content-Security-Policy "
default-src 'self';
frame-ancestors 'self';
form-action 'self' {{ external_lb_vip_address }}:5000 <YOUR-AUTHORISATION-SERVER-ORIGIN>;
upgrade-insecure-requests;
style-src 'self' 'unsafe-inline';
script-src 'self' 'unsafe-inline' 'unsafe-eval';
child-src 'self' {{ external_lb_vip_address }}:{{ nova_spice_html5proxy_base_port }} {{ external_lb_vip_address }}:{{ nova_novncproxy_port }} {{ external_lb_vip_address }}:{{ nova_serialconsoleproxy_port }};
frame-src 'self' {{ external_lb_vip_address }}:{{ nova_spice_html5proxy_base_port }} {{ external_lb_vip_address }}:{{ nova_novncproxy_port }} {{ external_lb_vip_address }}:{{ nova_serialconsoleproxy_port }};
"
[ English | English (United Kingdom) | español | Indonesia | русский | Deutsch ]
Security.txt¶
security.txt is a proposed IETF standard to allow independent security
researchers to easily report vulnerabilities. The standard defines that a text
file called security.txt
should be found at «/.well-known/security.txt». For
legacy compatibility reasons the file might also be placed at «/security.txt».
In OpenStack-Ansible, security.txt
is implemented in haproxy as all public
endpoints reside behind it. It defaults to directing any request paths that
end with /security.txt
to the text file using an ACL rule in haproxy.
Enabling security.txt¶
Use the following process to add a security.txt
file to your deployment
using OpenStack-Ansible:
Write the contents of the
security.txt
file in accordance with the standard.Define the contents of
security.txt
in the variablehaproxy_security_txt_content
in the/etc/openstack_deploy/user_variables.yml
file:
haproxy_security_txt_content: | # This is my example security.txt file # Please see https://securitytxt.org/ for details of the specification of this file
Update haproxy
# openstack-ansible haproxy-install.yml
Advanced security.txt ACL¶
In some cases you may need to change the haproxy ACL used to redirect requests
to the security.txt
file, such as adding extra domains.
The haproxy ACL is updated by overriding the variable
haproxy_map_entries
inside haproxy_security_txt_service
.
[ English | English (United Kingdom) | español | Indonesia | русский | Deutsch ]
Apply ansible-hardening¶
The ansible-hardening
role is applicable to physical hosts within
an OpenStack-Ansible deployment
that are operating as any type of node, infrastructure or compute. By
default, the role is enabled. You can disable it by changing the value of
the apply_security_hardening
variable in the user_variables.yml
file
to false
:
apply_security_hardening: false
You can apply security hardening configurations to an existing environment or audit an environment by using a playbook supplied with OpenStack-Ansible:
# Apply security hardening configurations
openstack-ansible security-hardening.yml
# Perform a quick audit by using Ansible's check mode
openstack-ansible --check security-hardening.yml
For more information about the security configurations, see the security hardening role documentation.
[ English | English (United Kingdom) | español | Indonesia | русский | Deutsch ]
Running as non-root user¶
Deployers do not have to use root
user accounts on deploy or target hosts.
This approach works out of the box by leveraging Ansible privilege escalation.
Deploment hosts¶
You can avoid usage of the root
user on a deployment by following these
guidelines:
Clone OpenStack-Ansible repository to home user directory. It means, that instead of
/opt/openstack-ansible
repository will be in~/openstack-ansible
.Use custom path for
/etc/openstack_deploy
directory. You can place OpenStack-Ansible configuration directory inside user home directory. For that you will need to define the following environment variable:export OSA_CONFIG_DIR="${HOME}/openstack_deploy"
If you want to keep basic ansible logging, you need either to create
/openstack/log/ansible-logging/
directory and allow user to write there, or define the following environment variable:export ANSIBLE_LOG_PATH="${HOME}/ansible-logging/ansible.log"
Nota
You can also add the environment variable to
user.rc
file inside openstack_deploy folder (${OSA_CONFIG_DIR}/user.rc
).user.rc
file is sourced each time you runopenstack-ansible
binary.Initial bootstrap of OpenStack-Ansible using ./scripts/bootstrap-ansible.sh script still should be done either as the
root
user or escalate privileges usingsudo
orsu
.
Destination hosts¶
It is also possible to use non-root user for Ansible authentication on destination hosts. However, this user must be able to escalate privileges using Ansible privilege escalation.
Nota
You can add environment variables from that section to user.rc
file
inside openstack_deploy folder (${OSA_CONFIG_DIR}/user.rc
). user.rc
file is sourced each time you run openstack-ansible
binary.
There are also couple of additional things which you might want to consider:
Provide
--become
flag each time your run a playbook or ad-hoc command. Alternatively, you can define the following environment variable:export ANSIBLE_BECOME="True"
Override Ansible temporary path if LXC containers are used. The ansible connection from the physical host to the LXC container passes environment variables from the host. This means that Ansible attempts to use the same temporary folder in the LXC container as it would on the host, relative to the non-root user ${HOME} directory. This will not exist inside the container and another path must be used instead.
You can do that following in multiple ways:
Define
ansible_remote_tmp: /tmp
in user_variables.ymlDefine the following environment variable:
export ANSIBLE_LOCAL_TEMP="/tmp"
Define the user that will be used for for connections from the deploy host to the ansible target hosts. In case the user is the same for all hosts in your deployment, you can do it in one of following ways:
Define
ansible_user: <USER>
in user_variables.ymlDefine the following environment variable:
export ANSIBLE_REMOTE_USER="<USER>"
If the user differs from host to host, you can leverage group_vars or host_vars. More information on how to use that can be found in the overrides guide