security group rule

security group rule

A security group rule specifies the network access rules for servers and other resources on the network.

Compute v2, Network v2

security group rule create

Create a new security group rule

openstack security group rule create
    [--remote-ip <ip-address> | --remote-group <group>]
    [--dst-port <port-range> | [--icmp-type <icmp-type> [--icmp-code <icmp-code>]]]
    [--protocol <protocol>]
    [--ingress | --egress]
    [--ethertype <ethertype>]
    [--project <project> [--project-domain <project-domain>]]
    [--description <description>]
    <group>
--remote-ip <ip-address>

Remote IP address block (may use CIDR notation; default for IPv4 rule: 0.0.0.0/0)

--remote-group <group>

Remote security group (name or ID)

--dst-port <port-range>

Destination port, may be a single port or a starting and ending port range: 137:139. Required for IP protocols TCP and UDP. Ignored for ICMP IP protocols.

--icmp-type <icmp-type>

ICMP type for ICMP IP protocols

Network version 2 only

--icmp-code <icmp-code>

ICMP code for ICMP IP protocols

Network version 2 only

--protocol <protocol>

IP protocol (icmp, tcp, udp; default: tcp)

Compute version 2

IP protocol (ah, dccp, egp, esp, gre, icmp, igmp, ipv6-encap, ipv6-frag, ipv6-icmp, ipv6-nonxt, ipv6-opts, ipv6-route, ospf, pgm, rsvp, sctp, tcp, udp, udplite, vrrp and integer representations [0-255] or any; default: any (all protocols))

Network version 2

--ingress

Rule applies to incoming network traffic (default)

Network version 2 only

--egress

Rule applies to outgoing network traffic

Network version 2 only

--ethertype <ethertype>

Ethertype of network traffic (IPv4, IPv6; default: based on IP protocol)

Network version 2 only

--project <project>

Owner’s project (name or ID)

Network version 2 only

--project-domain <project-domain>

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

Network version 2 only

--description <description>

Set security group rule description

Network version 2 only

<group>

Create rule in this security group (name or ID)

security group rule delete

Delete security group rule(s)

openstack security group rule delete
    <rule> [<rule> ...]
<rule>

Security group rule(s) to delete (ID only)

security group rule list

List security group rules

openstack security group rule list
    [--all-projects]
    [--protocol <protocol>]
    [--ingress | --egress]
    [--long]
    [<group>]
--all-projects

Display information from all projects (admin only)

Network version 2 ignores this option and will always display information for all projects (admin only).

--long

List additional fields in output

Compute version 2 does not have additional fields to display.

--protocol

List rules by the IP protocol (ah, dhcp, egp, esp, gre, icmp, igmp, ipv6-encap, ipv6-frag, ipv6-icmp, ipv6-nonxt,ipv6-opts, ipv6-route, ospf, pgm, rsvp, sctp, tcp, udp, udplite, vrrp and integer representations [0-255] or any; default: any (all protocols))

Network version 2

--ingress

List rules applied to incoming network traffic

Network version 2 only

--egress

List rules applied to outgoing network traffic

Network version 2 only

<group>

List all rules in this security group (name or ID)

security group rule show

Display security group rule details

openstack security group rule show
    <rule>
<rule>

Security group rule to display (ID only)

Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.