Source code for compute.admin.test_volume_swap

#    Licensed under the Apache License, Version 2.0 (the "License"); you may
#    not use this file except in compliance with the License. You may obtain
#    a copy of the License at
#
#         http://www.apache.org/licenses/LICENSE-2.0
#
#    Unless required by applicable law or agreed to in writing, software
#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
#    License for the specific language governing permissions and limitations
#    under the License.

import time

from tempest.api.compute import base
from tempest.common import waiters
from tempest import config
from tempest.lib import decorators
from tempest.lib import exceptions as lib_exc

CONF = config.CONF


[docs] class TestVolumeSwapBase(base.BaseV2ComputeAdminTest): create_default_network = True @classmethod def setup_credentials(cls): cls.prepare_instance_network() super(TestVolumeSwapBase, cls).setup_credentials() @classmethod def skip_checks(cls): super(TestVolumeSwapBase, cls).skip_checks() if not CONF.service_available.cinder: raise cls.skipException("Cinder is not available") if not CONF.compute_feature_enabled.swap_volume: raise cls.skipException("Swapping volumes is not supported.") def wait_for_server_volume_swap(self, server_id, old_volume_id, new_volume_id): """Waits for a server to swap the old volume to a new one.""" volume_attachments = self.servers_client.list_volume_attachments( server_id)['volumeAttachments'] attached_volume_ids = [attachment['volumeId'] for attachment in volume_attachments] start = int(time.time()) while (old_volume_id in attached_volume_ids) \ or (new_volume_id not in attached_volume_ids): time.sleep(self.servers_client.build_interval) volume_attachments = self.servers_client.list_volume_attachments( server_id)['volumeAttachments'] attached_volume_ids = [attachment['volumeId'] for attachment in volume_attachments] if int(time.time()) - start >= self.servers_client.build_timeout: old_vol_bdm_status = 'in BDM' \ if old_volume_id in attached_volume_ids else 'not in BDM' new_vol_bdm_status = 'in BDM' \ if new_volume_id in attached_volume_ids else 'not in BDM' message = ('Failed to swap old volume %(old_volume_id)s ' '(current %(old_vol_bdm_status)s) to new volume ' '%(new_volume_id)s (current %(new_vol_bdm_status)s)' ' on server %(server_id)s within the required time ' '(%(timeout)s s)' % {'old_volume_id': old_volume_id, 'old_vol_bdm_status': old_vol_bdm_status, 'new_volume_id': new_volume_id, 'new_vol_bdm_status': new_vol_bdm_status, 'server_id': server_id, 'timeout': self.servers_client.build_timeout}) raise lib_exc.TimeoutException(message)
[docs] class TestVolumeSwap(TestVolumeSwapBase): """The test suite for swapping of volume with admin user""" # NOTE(mriedem): This is an uncommon scenario to call the compute API # to swap volumes directly; swap volume is primarily only for volume # live migration and retype callbacks from the volume service, and is slow # so it's marked as such.
[docs] @decorators.attr(type='slow') @decorators.idempotent_id('1769f00d-a693-4d67-a631-6a3496773813') def test_volume_swap(self): """Test swapping of volume attached to server with admin user The following is the scenario outline: 1. Create a volume "volume1" with non-admin. 2. Create a volume "volume2" with non-admin. 3. Boot an instance "instance1" with non-admin. 4. Attach "volume1" to "instance1" with non-admin. 5. Swap volume from "volume1" to "volume2" as admin. 6. Check the swap volume is successful and "volume2" is attached to "instance1" and "volume1" is in available state. 7. Swap volume from "volume2" to "volume1" as admin. 8. Check the swap volume is successful and "volume1" is attached to "instance1" and "volume2" is in available state. """ # Create two volumes. # NOTE(gmann): Volumes are created before server creation so that # volumes cleanup can happen successfully irrespective of which volume # is attached to server. volume1 = self.create_volume() volume2 = self.create_volume() # Boot server validation_resources = self.get_class_validation_resources( self.os_primary) # NOTE(gibi): We need to wait for the guest to fully boot as the test # will attach a volume to the server and therefore cleanup will try to # detach it. See bug 1960346 for details. server = self.create_test_server( validatable=True, validation_resources=validation_resources, wait_until='SSHABLE' ) # Attach "volume1" to server self.attach_volume(server, volume1) # Swap volume from "volume1" to "volume2" self.admin_servers_client.update_attached_volume( server['id'], volume1['id'], volumeId=volume2['id']) waiters.wait_for_volume_resource_status(self.volumes_client, volume1['id'], 'available') waiters.wait_for_volume_resource_status(self.volumes_client, volume2['id'], 'in-use') self.wait_for_server_volume_swap(server['id'], volume1['id'], volume2['id']) # Verify "volume2" is attached to the server vol_attachments = self.servers_client.list_volume_attachments( server['id'])['volumeAttachments'] self.assertEqual(1, len(vol_attachments)) self.assertIn(volume2['id'], vol_attachments[0]['volumeId']) # Swap volume from "volume2" to "volume1" self.admin_servers_client.update_attached_volume( server['id'], volume2['id'], volumeId=volume1['id']) waiters.wait_for_volume_resource_status(self.volumes_client, volume2['id'], 'available') waiters.wait_for_volume_resource_status(self.volumes_client, volume1['id'], 'in-use') self.wait_for_server_volume_swap(server['id'], volume2['id'], volume1['id']) # Verify "volume1" is attached to the server vol_attachments = self.servers_client.list_volume_attachments( server['id'])['volumeAttachments'] self.assertEqual(1, len(vol_attachments)) self.assertIn(volume1['id'], vol_attachments[0]['volumeId'])
[docs] class TestMultiAttachVolumeSwap(TestVolumeSwapBase): """Test swapping volume attached to multiple servers Test swapping volume attached to multiple servers with microversion greater than 2.59 """ min_microversion = '2.60' max_microversion = 'latest' @classmethod def skip_checks(cls): super(TestMultiAttachVolumeSwap, cls).skip_checks() if not CONF.compute_feature_enabled.volume_multiattach: raise cls.skipException('Volume multi-attach is not available.') @classmethod def setup_clients(cls): super(TestMultiAttachVolumeSwap, cls).setup_clients() # Need this to set readonly volumes. cls.admin_volumes_client = cls.os_admin.volumes_client_latest # NOTE(mriedem): This is an uncommon scenario to call the compute API # to swap volumes directly; swap volume is primarily only for volume # live migration and retype callbacks from the volume service, and is slow # so it's marked as such.
[docs] @decorators.attr(type='slow') @decorators.idempotent_id('e8f8f9d1-d7b7-4cd2-8213-ab85ef697b6e') # For some reason this test intermittently fails on teardown when there are # multiple compute nodes and the servers are split across the computes. # For now, just skip this test if there are multiple computes. # Alternatively we could put the servers in an affinity group if there are # multiple computes but that would just side-step the underlying bug. @decorators.skip_because(bug='1807723', condition=CONF.compute.min_compute_nodes > 1) def test_volume_swap_with_multiattach(self): """Test swapping volume attached to multiple servers The following is the scenario outline: 1. Create a volume "volume1" with non-admin. 2. Create a volume "volume2" with non-admin. 3. Boot 2 instances "server1" and "server2" with non-admin. 4. Attach "volume1" to "server1" with non-admin. 5. Attach "volume1" to "server2" with non-admin. 6. Swap "volume1" to "volume2" on "server1" 7. Check "volume1" is attached to "server2" and not attached to "server1" 8. Check "volume2" is attached to "server1". """ multiattach_vol_type = CONF.volume.volume_type_multiattach # Create two volumes. # NOTE(gmann): Volumes are created before server creation so that # volumes cleanup can happen successfully irrespective of which volume # is attached to server. volume1 = self.create_volume(volume_type=multiattach_vol_type) # Make volume1 read-only since you can't swap from a volume with # multiple read/write attachments, and you can't change the readonly # flag on an in-use volume so we have to do this before attaching # volume1 to anything. If the compute API ever supports per-attachment # attach modes, then we can handle this differently. self.admin_volumes_client.update_volume_readonly( volume1['id'], readonly=True) volume2 = self.create_volume(volume_type=multiattach_vol_type) # Create two servers and wait for them to be ACTIVE. validation_resources = self.get_class_validation_resources( self.os_primary) # NOTE(gibi): We need to wait for the guests to fully boot as the test # will attach volumes to the servers and therefore cleanup will try to # detach them. See bug 1960346 for details. reservation_id = self.create_test_server( validatable=True, validation_resources=validation_resources, wait_until='SSHABLE', min_count=2, return_reservation_id=True, )['reservation_id'] # Get the servers using the reservation_id. servers = self.servers_client.list_servers( reservation_id=reservation_id)['servers'] self.assertEqual(2, len(servers)) # Attach volume1 to server1 server1 = servers[0] self.attach_volume(server1, volume1) # Attach volume1 to server2 server2 = servers[1] self.attach_volume(server2, volume1) # Swap volume1 to volume2 on server1, volume1 should remain attached # to server 2 self.admin_servers_client.update_attached_volume( server1['id'], volume1['id'], volumeId=volume2['id']) # volume1 will return to in-use after the swap waiters.wait_for_volume_resource_status(self.volumes_client, volume1['id'], 'in-use') waiters.wait_for_volume_resource_status(self.volumes_client, volume2['id'], 'in-use') self.wait_for_server_volume_swap(server1['id'], volume1['id'], volume2['id']) # Verify volume2 is attached to server1 vol_attachments = self.servers_client.list_volume_attachments( server1['id'])['volumeAttachments'] self.assertEqual(1, len(vol_attachments)) self.assertIn(volume2['id'], vol_attachments[0]['volumeId']) # Verify volume1 is still attached to server2 vol_attachments = self.servers_client.list_volume_attachments( server2['id'])['volumeAttachments'] self.assertEqual(1, len(vol_attachments)) self.assertIn(volume1['id'], vol_attachments[0]['volumeId'])