watcher.conf

The watcher.conf file contains most of the options to configure the Watcher services.

DEFAULT

enable_authentication
Type

boolean

Default

True

This option enables or disables user authentication via keystone. Default value is True.

fatal_exception_format_errors
Type

boolean

Default

False

Make exception message format errors fatal.

pybasedir
Type

string

Default

/home/zuul/src/opendev.org/openstack/watcher/watcher

Directory where the watcher python module is installed.

bindir
Type

string

Default

$pybasedir/bin

Directory where watcher binaries are installed.

state_path
Type

string

Default

$pybasedir

Top-level directory for maintaining watcher’s state.

periodic_interval
Type

integer

Default

60

Mutable

This option can be changed without restarting.

Seconds between running periodic tasks.

host
Type

host address

Default

ubuntu-bionic-inap-mtl01-0018297653

Name of this node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address. However, the node name must be valid within an AMQP key.

service_down_time
Type

integer

Default

90

Maximum time since last check-in for up service.

debug
Type

boolean

Default

False

Mutable

This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append
Type

string

Default

<None>

Mutable

This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

Deprecated Variations

Group

Name

DEFAULT

log-config

DEFAULT

log_config

log_date_format
Type

string

Default

%Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file
Type

string

Default

<None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations

Group

Name

DEFAULT

logfile

log_dir
Type

string

Default

<None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations

Group

Name

DEFAULT

logdir

watch_log_file
Type

boolean

Default

False

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog
Type

boolean

Default

False

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal
Type

boolean

Default

False

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility
Type

string

Default

LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json
Type

boolean

Default

False

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr
Type

boolean

Default

False

Log output to standard error. This option is ignored if log_config_append is set.

use_eventlog
Type

boolean

Default

False

Log output to Windows Event Log.

log_rotate_interval
Type

integer

Default

1

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is setto “interval”.

log_rotate_interval_type
Type

string

Default

days

Valid Values

Seconds, Minutes, Hours, Days, Weekday, Midnight

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

max_logfile_count
Type

integer

Default

30

Maximum number of rotated log files.

max_logfile_size_mb
Type

integer

Default

200

Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.

log_rotation_type
Type

string

Default

none

Valid Values

interval, size, none

Log rotation type.

Possible values

interval

Rotate logs at predefined time intervals.

size

Rotate logs once they reach a predefined size.

none

Do not rotate log files.

logging_context_format_string
Type

string

Default

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string
Type

string

Default

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix
Type

string

Default

%(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix
Type

string

Default

%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format
Type

string

Default

%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

default_log_levels
Type

list

Default

['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors
Type

boolean

Default

False

Enables or disables publication of error events.

instance_format
Type

string

Default

"[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format
Type

string

Default

"[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval
Type

integer

Default

0

Interval, number of seconds, of log rate limiting.

rate_limit_burst
Type

integer

Default

0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level
Type

string

Default

CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations
Type

boolean

Default

False

Enables or disables fatal status of deprecations.

run_external_periodic_tasks
Type

boolean

Default

True

Some periodic tasks can be run in a separate process. Should we run them here?

backdoor_port
Type

string

Default

<None>

Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.

backdoor_socket
Type

string

Default

<None>

Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with ‘backdoor_port’ in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option. Inside the path {pid} will be replaced with the PID of the current process.

log_options
Type

boolean

Default

True

Enables or disables logging values of all registered options when starting a service (at DEBUG level).

graceful_shutdown_timeout
Type

integer

Default

60

Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.

api_paste_config
Type

string

Default

api-paste.ini

File name for the paste.deploy config for api service

wsgi_log_format
Type

string

Default

%(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f

A python format string that is used as the template to generate log lines. The following values can beformatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.

tcp_keepidle
Type

integer

Default

600

Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not supported on OS X.

wsgi_default_pool_size
Type

integer

Default

100

Size of the pool of greenthreads used by wsgi

max_header_line
Type

integer

Default

16384

Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated when keystone is configured to use PKI tokens with big service catalogs).

wsgi_keep_alive
Type

boolean

Default

True

If False, closes the client socket connection explicitly.

client_socket_timeout
Type

integer

Default

900

Timeout for client connections’ socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value of ‘0’ means wait forever.

rpc_conn_pool_size
Type

integer

Default

30

Size of RPC connection pool.

Deprecated Variations

Group

Name

DEFAULT

rpc_conn_pool_size

conn_pool_min_size
Type

integer

Default

2

The pool size limit for connections expiration policy

conn_pool_ttl
Type

integer

Default

1200

The time-to-live in sec of idle connections in the pool

executor_thread_pool_size
Type

integer

Default

64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations

Group

Name

DEFAULT

rpc_thread_pool_size

rpc_response_timeout
Type

integer

Default

60

Seconds to wait for a response from a call.

transport_url
Type

string

Default

rabbit://

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

control_exchange
Type

string

Default

openstack

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

api

port
Type

port number

Default

9322

Minimum Value

0

Maximum Value

65535

The port for the watcher API server

host
Type

host address

Default

127.0.0.1

The listen IP address for the watcher API server

max_limit
Type

integer

Default

1000

The maximum number of items returned in a single response from a collection resource

workers
Type

integer

Default

<None>

Minimum Value

1

Number of workers for Watcher API service. The default is equal to the number of CPUs available if that can be determined, else a default worker count of 1 is returned.

enable_ssl_api
Type

boolean

Default

False

Enable the integrated stand-alone API to service requests via HTTPS instead of HTTP. If there is a front-end service performing HTTPS offloading from the service, this option should be False; note, you will want to change public API endpoint to represent SSL termination URL with ‘public_endpoint’ option.

cache

config_prefix
Type

string

Default

cache.oslo

Prefix for building the configuration dictionary for the cache region. This should not need to be changed unless there is another dogpile.cache region with the same configuration name.

expiration_time
Type

integer

Default

600

Default TTL, in seconds, for any cached item in the dogpile.cache region. This applies to any cached method that doesn’t have an explicit cache expiration time defined for it.

backend
Type

string

Default

dogpile.cache.null

Valid Values

oslo_cache.memcache_pool, oslo_cache.dict, oslo_cache.mongo, oslo_cache.etcd3gw, dogpile.cache.memcached, dogpile.cache.pylibmc, dogpile.cache.bmemcached, dogpile.cache.dbm, dogpile.cache.redis, dogpile.cache.memory, dogpile.cache.memory_pickle, dogpile.cache.null

Cache backend module. For eventlet-based or environments with hundreds of threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is recommended. For environments with less than 100 threaded servers, Memcached (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test environments with a single instance of the server can use the dogpile.cache.memory backend.

backend_argument
Type

multi-valued

Default

''

Arguments supplied to the backend module. Specify this option once per argument to be passed to the dogpile.cache backend. Example format: “<argname>:<value>”.

proxies
Type

list

Default

[]

Proxy classes to import that will affect the way the dogpile.cache backend functions. See the dogpile.cache documentation on changing-backend-behavior.

enabled
Type

boolean

Default

False

Global toggle for caching.

debug_cache_backend
Type

boolean

Default

False

Extra debugging from the cache backend (cache keys, get/set/delete/etc calls). This is only really useful if you need to see the specific cache-backend get/set/delete calls with the keys/values. Typically this should be left set to false.

memcache_servers
Type

list

Default

['localhost:11211']

Memcache servers in the format of “host:port”. (dogpile.cache.memcached and oslo_cache.memcache_pool backends only). If a given host refer to an IPv6 or a given domain refer to IPv6 then you should prefix the given address with the address family (inet6) (e.g inet6[::1]:11211, inet6:[fd12:3456:789a:1::1]:11211, inet6:[controller-0.internalapi]:11211). If the address family is not given then default address family used will be inet which correspond to IPv4

memcache_dead_retry
Type

integer

Default

300

Number of seconds memcached server is considered dead before it is tried again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_socket_timeout
Type

floating point

Default

1.0

Timeout in seconds for every call to a server. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_pool_maxsize
Type

integer

Default

10

Max total number of open connections to every memcached server. (oslo_cache.memcache_pool backend only).

memcache_pool_unused_timeout
Type

integer

Default

60

Number of seconds a connection to memcached is held unused in the pool before it is closed. (oslo_cache.memcache_pool backend only).

memcache_pool_connection_get_timeout
Type

integer

Default

10

Number of seconds that an operation will wait to get a memcache client connection.

tls_enabled
Type

boolean

Default

False

Global toggle for TLS usage when comunicating with the caching servers.

tls_cafile
Type

string

Default

<None>

Path to a file of concatenated CA certificates in PEM format necessary to establish the caching servers’ authenticity. If tls_enabled is False, this option is ignored.

tls_certfile
Type

string

Default

<None>

Path to a single file in PEM format containing the client’s certificate as well as any number of CA certificates needed to establish the certificate’s authenticity. This file is only required when client side authentication is necessary. If tls_enabled is False, this option is ignored.

tls_keyfile
Type

string

Default

<None>

Path to a single file containing the client’s private key in. Otherwhise the private key will be taken from the file specified in tls_certfile. If tls_enabled is False, this option is ignored.

tls_allowed_ciphers
Type

string

Default

<None>

Set the available ciphers for sockets created with the TLS context. It should be a string in the OpenSSL cipher list format. If not specified, all OpenSSL enabled ciphers will be available.

ceilometer_client

api_version
Type

string

Default

2

Version of Ceilometer API to use in ceilometerclient.

Warning

This option is deprecated for removal since 1.13.0. Its value may be silently ignored in the future.

Reason

Ceilometer API is deprecated since Ocata release. Any related configuration options are deprecated too.

endpoint_type
Type

string

Default

internalURL

Type of endpoint to use in ceilometerclient. Supported values: internalURL, publicURL, adminURL. The default is internalURL.

Warning

This option is deprecated for removal since 1.13.0. Its value may be silently ignored in the future.

Reason

Ceilometer API is deprecated since Ocata release. Any related configuration options are deprecated too.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

Warning

This option is deprecated for removal since 1.13.0. Its value may be silently ignored in the future.

Reason

Ceilometer API is deprecated since Ocata release. Any related configuration options are deprecated too.

cinder_client

api_version
Type

string

Default

3

Version of Cinder API to use in cinderclient.

endpoint_type
Type

string

Default

publicURL

Type of endpoint to use in cinderclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

collector

collector_plugins
Type

list

Default

['compute']

The cluster data model plugin names.

Supported in-tree collectors include:

  • compute - data model collector for nova

  • storage - data model collector for cinder

  • baremetal - data model collector for ironic

Custom data model collector plugins can be defined with the watcher_cluster_data_model_collectors extension point.

api_call_retries
Type

integer

Default

10

Number of retries before giving up on external service calls.

api_query_timeout
Type

integer

Default

1

Time before retry after failed call to external service.

database

mysql_engine
Type

string

Default

InnoDB

MySQL engine to use.

sqlite_synchronous
Type

boolean

Default

True

If True, SQLite uses synchronous mode.

Deprecated Variations

Group

Name

DEFAULT

sqlite_synchronous

backend
Type

string

Default

sqlalchemy

The back end to use for the database.

Deprecated Variations

Group

Name

DEFAULT

db_backend

connection
Type

string

Default

<None>

The SQLAlchemy connection string to use to connect to the database.

Deprecated Variations

Group

Name

DEFAULT

sql_connection

DATABASE

sql_connection

sql

connection

slave_connection
Type

string

Default

<None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode
Type

string

Default

TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

mysql_enable_ndb
Type

boolean

Default

False

If True, transparently enables support for handling MySQL Cluster (NDB).

connection_recycle_time
Type

integer

Default

3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

Deprecated Variations

Group

Name

DATABASE

idle_timeout

database

idle_timeout

DEFAULT

sql_idle_timeout

DATABASE

sql_idle_timeout

sql

idle_timeout

max_pool_size
Type

integer

Default

5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

Deprecated Variations

Group

Name

DEFAULT

sql_max_pool_size

DATABASE

sql_max_pool_size

max_retries
Type

integer

Default

10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

Deprecated Variations

Group

Name

DEFAULT

sql_max_retries

DATABASE

sql_max_retries

retry_interval
Type

integer

Default

10

Interval between retries of opening a SQL connection.

Deprecated Variations

Group

Name

DEFAULT

sql_retry_interval

DATABASE

reconnect_interval

max_overflow
Type

integer

Default

50

If set, use this value for max_overflow with SQLAlchemy.

Deprecated Variations

Group

Name

DEFAULT

sql_max_overflow

DATABASE

sqlalchemy_max_overflow

connection_debug
Type

integer

Default

0

Minimum Value

0

Maximum Value

100

Verbosity of SQL debugging information: 0=None, 100=Everything.

Deprecated Variations

Group

Name

DEFAULT

sql_connection_debug

connection_trace
Type

boolean

Default

False

Add Python stack traces to SQL as comment strings.

Deprecated Variations

Group

Name

DEFAULT

sql_connection_trace

pool_timeout
Type

integer

Default

<None>

If set, use this value for pool_timeout with SQLAlchemy.

Deprecated Variations

Group

Name

DATABASE

sqlalchemy_pool_timeout

use_db_reconnect
Type

boolean

Default

False

Enable the experimental use of database reconnect on connection lost.

db_retry_interval
Type

integer

Default

1

Seconds between retries of a database transaction.

db_inc_retry_interval
Type

boolean

Default

True

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval
Type

integer

Default

10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries
Type

integer

Default

20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

connection_parameters
Type

string

Default

''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

glance_client

api_version
Type

string

Default

2

Version of Glance API to use in glanceclient.

endpoint_type
Type

string

Default

publicURL

Type of endpoint to use in glanceclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

gnocchi_client

api_version
Type

string

Default

1

Version of Gnocchi API to use in gnocchiclient.

endpoint_type
Type

string

Default

public

Type of endpoint to use in gnocchi client. Supported values: internal, public, admin. The default is public.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

grafana_client

See https://docs.openstack.org/watcher/latest/datasources/grafana.html for details on how these options are used.

token
Type

string

Default

<None>

Authentication token to gain access

base_url
Type

string

Default

<None>

First part of the url (including https:// or http://) up until project id part. Example: https://secure.org/api/datasource/proxy/

project_id_map
Type

dict

Default

{'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to grafana project ids. Dictionary values should be positive integers. Example: 7465

database_map
Type

dict

Default

{'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to grafana databases. Values should be strings. Example: influx_production

attribute_map
Type

dict

Default

{'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to resource attributes. For a complete list of available attributes see https://docs.openstack.org/watcher/latest/datasources/grafana.html#attribute Values should be strings. Example: hostname

translator_map
Type

dict

Default

{'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to grafana translators. Values should be strings. Example: influxdb

query_map
Type

dict

Default

{'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to grafana queries. Values should be strings for which the .format method will transform it. The transformation offers five parameters to the query labeled {0} to {4}. {0} will be replaced with the aggregate, {1} with the resource attribute, {2} with the period, {3} with the granularity and {4} with translator specifics for InfluxDB this will be the retention period. These queries will need to be constructed using tools such as Postman. Example: SELECT cpu FROM {4}.cpu_percent WHERE host == ‘{1}’ AND time > now()-{2}s

grafana_translators

retention_periods
Type

dict

Default

{'one_week': 604800, 'one_month': 2592000, 'five_years': 31556952}

Keys are the names of retention periods in InfluxDB and the values should correspond with the maximum time they can retain in seconds. Example: {‘one_day’: 86400}

ironic_client

api_version
Type

string

Default

1

Version of Ironic API to use in ironicclient.

endpoint_type
Type

string

Default

publicURL

Type of endpoint to use in ironicclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

keystone_authtoken

www_authenticate_uri
Type

string

Default

<None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

Deprecated Variations

Group

Name

keystone_authtoken

auth_uri

auth_uri
Type

string

Default

<None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

Warning

This option is deprecated for removal since Queens. Its value may be silently ignored in the future.

Reason

The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

auth_version
Type

string

Default

<None>

API version of the Identity API endpoint.

interface
Type

string

Default

admin

Interface to use for the Identity API endpoint. Valid values are “public”, “internal” or “admin”(default).

delay_auth_decision
Type

boolean

Default

False

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

http_connect_timeout
Type

integer

Default

<None>

Request timeout value for communicating with Identity API server.

http_request_max_retries
Type

integer

Default

3

How many times are we trying to reconnect when communicating with Identity API Server.

cache
Type

string

Default

<None>

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

certfile
Type

string

Default

<None>

Required if identity server requires client certificate

keyfile
Type

string

Default

<None>

Required if identity server requires client certificate

cafile
Type

string

Default

<None>

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

insecure
Type

boolean

Default

False

Verify HTTPS connections.

region_name
Type

string

Default

<None>

The region in which the identity server can be found.

memcached_servers
Type

list

Default

<None>

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

Deprecated Variations

Group

Name

keystone_authtoken

memcache_servers

token_cache_time
Type

integer

Default

300

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

memcache_security_strategy
Type

string

Default

None

Valid Values

None, MAC, ENCRYPT

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_secret_key
Type

string

Default

<None>

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_pool_dead_retry
Type

integer

Default

300

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize
Type

integer

Default

10

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout
Type

integer

Default

3

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout
Type

integer

Default

60

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_pool_conn_get_timeout
Type

integer

Default

10

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_use_advanced_pool
Type

boolean

Default

False

(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.

include_service_catalog
Type

boolean

Default

True

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

enforce_token_bind
Type

string

Default

permissive

Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

service_token_roles
Type

list

Default

['service']

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required
Type

boolean

Default

False

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

service_type
Type

string

Default

<None>

The name or type of the service as it appears in the service catalog. This is used to validate tokens that have restricted access rules.

auth_type
Type

unknown type

Default

<None>

Authentication type to load

Deprecated Variations

Group

Name

keystone_authtoken

auth_plugin

auth_section
Type

unknown type

Default

<None>

Config Section from which to load plugin specific options

keystone_client

interface
Type

string

Default

admin

Valid Values

internal, public, admin

Type of endpoint to use in keystoneclient.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

monasca_client

api_version
Type

string

Default

2_0

Version of Monasca API to use in monascaclient.

interface
Type

string

Default

internal

Type of interface used for monasca endpoint. Supported values: internal, public, admin. The default is internal.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

neutron_client

api_version
Type

string

Default

2.0

Version of Neutron API to use in neutronclient.

endpoint_type
Type

string

Default

publicURL

Type of endpoint to use in neutronclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

nova_client

api_version
Type

string

Default

2.56

Version of Nova API to use in novaclient.

Minimum required version: 2.56

Certain Watcher features depend on a minimum version of the compute API being available which is enforced with this option. See https://docs.openstack.org/nova/latest/reference/api-microversion-history.html for the compute API microversion history.

endpoint_type
Type

string

Default

publicURL

Type of endpoint to use in novaclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

oslo_concurrency

disable_process_locking
Type

boolean

Default

False

Enables or disables inter-process locks.

Deprecated Variations

Group

Name

DEFAULT

disable_process_locking

lock_path
Type

string

Default

<None>

Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, a lock path must be set.

Deprecated Variations

Group

Name

DEFAULT

lock_path

oslo_messaging_amqp

container_name
Type

string

Default

<None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations

Group

Name

amqp1

container_name

idle_timeout
Type

integer

Default

0

Timeout for inactive connections (in seconds)

Deprecated Variations

Group

Name

amqp1

idle_timeout

trace
Type

boolean

Default

False

Debug: dump AMQP frames to stdout

Deprecated Variations

Group

Name

amqp1

trace

ssl
Type

boolean

Default

False

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file
Type

string

Default

''

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations

Group

Name

amqp1

ssl_ca_file

ssl_cert_file
Type

string

Default

''

Self-identifying certificate PEM file for client authentication

Deprecated Variations

Group

Name

amqp1

ssl_cert_file

ssl_key_file
Type

string

Default

''

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations

Group

Name

amqp1

ssl_key_file

ssl_key_password
Type

string

Default

<None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations

Group

Name

amqp1

ssl_key_password

ssl_verify_vhost
Type

boolean

Default

False

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

sasl_mechanisms
Type

string

Default

''

Space separated list of acceptable SASL mechanisms

Deprecated Variations

Group

Name

amqp1

sasl_mechanisms

sasl_config_dir
Type

string

Default

''

Path to directory that contains the SASL configuration

Deprecated Variations

Group

Name

amqp1

sasl_config_dir

sasl_config_name
Type

string

Default

''

Name of configuration file (without .conf suffix)

Deprecated Variations

Group

Name

amqp1

sasl_config_name

sasl_default_realm
Type

string

Default

''

SASL realm to use if no realm present in username

connection_retry_interval
Type

integer

Default

1

Minimum Value

1

Seconds to pause before attempting to re-connect.

connection_retry_backoff
Type

integer

Default

2

Minimum Value

0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max
Type

integer

Default

30

Minimum Value

1

Maximum limit for connection_retry_interval + connection_retry_backoff

Type

integer

Default

10

Minimum Value

1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry
Type

integer

Default

0

Minimum Value

-1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout
Type

integer

Default

30

Minimum Value

5

The deadline for an rpc reply message delivery.

default_send_timeout
Type

integer

Default

30

Minimum Value

5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout
Type

integer

Default

30

Minimum Value

5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

Type

integer

Default

600

Minimum Value

1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode
Type

string

Default

dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost
Type

boolean

Default

True

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix
Type

string

Default

exclusive

address prefix used when sending to a specific server

Deprecated Variations

Group

Name

amqp1

server_request_prefix

broadcast_prefix
Type

string

Default

broadcast

address prefix used when broadcasting to all servers

Deprecated Variations

Group

Name

amqp1

broadcast_prefix

group_request_prefix
Type

string

Default

unicast

address prefix when sending to any server in group

Deprecated Variations

Group

Name

amqp1

group_request_prefix

rpc_address_prefix
Type

string

Default

openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix
Type

string

Default

openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address
Type

string

Default

multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address
Type

string

Default

unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address
Type

string

Default

anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange
Type

string

Default

<None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange
Type

string

Default

<None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

Type

integer

Default

200

Minimum Value

1

Window size for incoming RPC Reply messages.

rpc_server_credit
Type

integer

Default

100

Minimum Value

1

Window size for incoming RPC Request messages

notify_server_credit
Type

integer

Default

100

Minimum Value

1

Window size for incoming Notification messages

pre_settled
Type

multi-valued

Default

rpc-cast

Default

rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

oslo_messaging_kafka

kafka_max_fetch_bytes
Type

integer

Default

1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout
Type

floating point

Default

1.0

Default timeout(s) for Kafka consumers

pool_size
Type

integer

Default

10

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

Driver no longer uses connection pool.

conn_pool_min_size
Type

integer

Default

2

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

Driver no longer uses connection pool.

conn_pool_ttl
Type

integer

Default

1200

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason

Driver no longer uses connection pool.

consumer_group
Type

string

Default

oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout
Type

floating point

Default

0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size
Type

integer

Default

16384

Size of batch for the producer async send

compression_codec
Type

string

Default

none

Valid Values

none, gzip, snappy, lz4, zstd

The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version

enable_auto_commit
Type

boolean

Default

False

Enable asynchronous consumer commits

max_poll_records
Type

integer

Default

500

The maximum number of records returned in a poll call

security_protocol
Type

string

Default

PLAINTEXT

Valid Values

PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL

Protocol used to communicate with brokers

sasl_mechanism
Type

string

Default

PLAIN

Mechanism when security protocol is SASL

ssl_cafile
Type

string

Default

''

CA certificate PEM file used to verify the server certificate

ssl_client_cert_file
Type

string

Default

''

Client certificate PEM file used for authentication.

ssl_client_key_file
Type

string

Default

''

Client key PEM file used for authentication.

ssl_client_key_password
Type

string

Default

''

Client key password file used for authentication.

oslo_messaging_notifications

driver
Type

multi-valued

Default

''

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations

Group

Name

DEFAULT

notification_driver

transport_url
Type

string

Default

<None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations

Group

Name

DEFAULT

notification_transport_url

topics
Type

list

Default

['notifications']

AMQP topic used for OpenStack notifications.

Deprecated Variations

Group

Name

rpc_notifier2

topics

DEFAULT

notification_topics

retry
Type

integer

Default

-1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

oslo_messaging_rabbit

amqp_durable_queues
Type

boolean

Default

False

Use durable queues in AMQP.

amqp_auto_delete
Type

boolean

Default

False

Auto-delete queues in AMQP.

Deprecated Variations

Group

Name

DEFAULT

amqp_auto_delete

ssl
Type

boolean

Default

False

Connect over SSL.

Deprecated Variations

Group

Name

oslo_messaging_rabbit

rabbit_use_ssl

ssl_version
Type

string

Default

''

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_ssl_version

ssl_key_file
Type

string

Default

''

SSL key file (valid only if SSL enabled).

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_ssl_keyfile

ssl_cert_file
Type

string

Default

''

SSL cert file (valid only if SSL enabled).

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_ssl_certfile

ssl_ca_file
Type

string

Default

''

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_ssl_ca_certs

heartbeat_in_pthread
Type

boolean

Default

False

EXPERIMENTAL: Run the health check heartbeat thread through a native python thread. By default if this option isn’t provided the health check heartbeat will inherit the execution model from the parent process. By example if the parent process have monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread.

kombu_reconnect_delay
Type

floating point

Default

1.0

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations

Group

Name

DEFAULT

kombu_reconnect_delay

kombu_compression
Type

string

Default

<None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout
Type

integer

Default

60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations

Group

Name

oslo_messaging_rabbit

kombu_reconnect_timeout

kombu_failover_strategy
Type

string

Default

round-robin

Valid Values

round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_login_method
Type

string

Default

AMQPLAIN

Valid Values

PLAIN, AMQPLAIN, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations

Group

Name

DEFAULT

rabbit_login_method

rabbit_retry_interval
Type

integer

Default

1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff
Type

integer

Default

2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations

Group

Name

DEFAULT

rabbit_retry_backoff

rabbit_interval_max
Type

integer

Default

30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_ha_queues
Type

boolean

Default

False

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations

Group

Name

DEFAULT

rabbit_ha_queues

rabbit_transient_queues_ttl
Type

integer

Default

1800

Minimum Value

1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count
Type

integer

Default

0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold
Type

integer

Default

60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).

heartbeat_rate
Type

integer

Default

2

How often times during the heartbeat_timeout_threshold we check the heartbeat.

direct_mandatory_flag
Type

integer

Default

True

Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.

oslo_policy

enforce_scope
Type

boolean

Default

False

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

enforce_new_defaults
Type

boolean

Default

False

This option controls whether or not to use old deprecated defaults when evaluating policies. If True, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with the enforce_scope flag so that you can get the benefits of new defaults and scope_type together

policy_file
Type

string

Default

policy.json

The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.

Deprecated Variations

Group

Name

DEFAULT

policy_file

policy_default_rule
Type

string

Default

default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations

Group

Name

DEFAULT

policy_default_rule

policy_dirs
Type

multi-valued

Default

policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations

Group

Name

DEFAULT

policy_dirs

remote_content_type
Type

string

Default

application/x-www-form-urlencoded

Valid Values

application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt
Type

boolean

Default

False

server identity verification for REST based policy check

remote_ssl_ca_crt_file
Type

string

Default

<None>

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file
Type

string

Default

<None>

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file
Type

string

Default

<None>

Absolute path client key file REST based policy check

oslo_reports

log_dir
Type

string

Default

<None>

Path to a log directory where to create a file

file_event_handler
Type

string

Default

<None>

The path to a file to watch for changes to trigger the reports, instead of signals. Setting this option disables the signal trigger for the reports. If application is running as a WSGI application it is recommended to use this instead of signals.

file_event_handler_interval
Type

integer

Default

1

How many seconds to wait between polls when file_event_handler is set

placement_client

Configuration options for connecting to the placement API service

api_version
Type

string

Default

1.29

microversion of placement API when using placement service.

interface
Type

string

Default

public

Valid Values

internal, public, admin

Type of endpoint when using placement service.

region_name
Type

string

Default

<None>

Region in Identity service catalog to use for communication with the OpenStack service.

watcher_applier

workers
Type

integer

Default

1

Minimum Value

1

Number of workers for applier, default value is 1.

conductor_topic
Type

string

Default

watcher.applier.control

The topic name used for control events, this topic used for rpc call

publisher_id
Type

string

Default

watcher.applier.api

The identifier used by watcher module on the message broker

workflow_engine
Type

string

Default

taskflow

Select the engine to use to execute the workflow

watcher_clients_auth

cafile
Type

string

Default

<None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile
Type

string

Default

<None>

PEM encoded client certificate cert file

keyfile
Type

string

Default

<None>

PEM encoded client certificate key file

insecure
Type

boolean

Default

False

Verify HTTPS connections.

timeout
Type

integer

Default

<None>

Timeout value for http requests

collect_timing
Type

boolean

Default

False

Collect per-API call timing information.

split_loggers
Type

boolean

Default

False

Log requests to multiple loggers.

auth_type
Type

unknown type

Default

<None>

Authentication type to load

Deprecated Variations

Group

Name

watcher_clients_auth

auth_plugin

auth_section
Type

unknown type

Default

<None>

Config Section from which to load plugin specific options

watcher_cluster_data_model_collectors.baremetal

period
Type

integer

Default

3600

The time interval (in seconds) between each synchronization of the model

watcher_cluster_data_model_collectors.compute

period
Type

integer

Default

3600

The time interval (in seconds) between each synchronization of the model

watcher_cluster_data_model_collectors.storage

period
Type

integer

Default

3600

The time interval (in seconds) between each synchronization of the model

watcher_datasources

datasources
Type

list

Default

['gnocchi', 'ceilometer', 'monasca', 'grafana']

Datasources to use in order to query the needed metrics. If one of strategy metric is not available in the first datasource, the next datasource will be chosen. This is the default for all strategies unless a strategy has a specific override.

query_max_retries
Type

integer

Default

10

Minimum Value

1

Mutable

This option can be changed without restarting.

How many times Watcher is trying to query again

Deprecated Variations

Group

Name

gnocchi_client

query_max_retries

query_timeout
Type

integer

Default

1

Minimum Value

0

Mutable

This option can be changed without restarting.

How many seconds Watcher should wait to do query again

Deprecated Variations

Group

Name

gnocchi_client

query_timeout

watcher_decision_engine

conductor_topic
Type

string

Default

watcher.decision.control

The topic name used for control events, this topic used for RPC calls

notification_topics
Type

list

Default

['nova.versioned_notifications', 'watcher.watcher_notifications']

The exchange and topic names from which notification events will be listened to. The exchange should be specified to get an ability to use pools.

publisher_id
Type

string

Default

watcher.decision.api

The identifier used by the Watcher module on the message broker

max_workers
Type

integer

Default

2

The maximum number of threads that can be used to execute strategies

action_plan_expiry
Type

integer

Default

24

Mutable

This option can be changed without restarting.

An expiry timespan(hours). Watcher invalidates any action plan for which its creation time -whose number of hours has been offset by this value- is older that the current time.

check_periodic_interval
Type

integer

Default

1800

Mutable

This option can be changed without restarting.

Interval (in seconds) for checking action plan expiry.

metric_map_path
Type

string

Default

/etc/watcher/metric_map.yaml

Path to metric map yaml formatted file. The file contains a map per datasource whose keys are the metric names as recognized by watcher and the value is the real name of the metric in the datasource. For example:

monasca:
  instance_cpu_usage: VM_CPU
gnocchi:
  instance_cpu_usage: cpu_vm_util

This file is optional.

continuous_audit_interval
Type

integer

Default

10

Mutable

This option can be changed without restarting.

Interval (in seconds) for checking newly created continuous audits.

watcher_planner

planner
Type

string

Default

weight

The selected planner used to schedule the actions

watcher_planners.weight

weights
Type

dict

Default

{'nop': 70, 'volume_migrate': 60, 'change_nova_service_state': 50, 'sleep': 40, 'migrate': 30, 'resize': 20, 'turn_host_to_acpi_s3_state': 10, 'change_node_power_state': 9}

These weights are used to schedule the actions. Action Plan will be build in accordance with sets of actions ordered by descending weights.Two action types cannot have the same weight.

parallelization
Type

dict

Default

{'turn_host_to_acpi_s3_state': 2, 'resize': 2, 'migrate': 2, 'sleep': 1, 'change_nova_service_state': 1, 'nop': 1, 'change_node_power_state': 2, 'volume_migrate': 2}

Number of actions to be run in parallel on a per action type basis.

watcher_planners.workload_stabilization

weights
Type

dict

Default

{'turn_host_to_acpi_s3_state': 0, 'resize': 1, 'migrate': 2, 'sleep': 3, 'change_nova_service_state': 4, 'nop': 5}

These weights are used to schedule the actions

watcher_strategies.basic

datasources
Type

list

Default

<None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

check_optimize_metadata
Type

boolean

Default

False

Check optimize metadata field in instance before migration

watcher_strategies.node_resource_consolidation

datasources
Type

list

Default

<None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.noisy_neighbor

datasources
Type

list

Default

<None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.outlet_temperature

datasources
Type

list

Default

<None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.storage_capacity_balance

datasources
Type

list

Default

<None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

ex_pools
Type

list

Default

['local_vstorage']

exclude pools

watcher_strategies.uniform_airflow

datasources
Type

list

Default

<None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.vm_workload_consolidation

datasources
Type

list

Default

<None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.workload_balance

datasources
Type

list

Default

<None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.workload_stabilization

datasources
Type

list

Default

<None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_workflow_engines.taskflow

max_workers
Type

integer

Default

8

Minimum Value

1

Number of workers for taskflow engine to execute actions.

action_execution_rule
Type

dict

Default

{}

The execution rule for linked actions,the key is strategy name and value ALWAYS means all actions will be executed,value ANY means if previous action executes success, the next action will be ignored.None means ALWAYS.