Managing TLS certificates

Overview

The encryption of API endpoints in an OpenStack cloud requires a method for the creation and distribution of TLS certificates, as well as the management of a certificate authority (CA). Charmed OpenStack supports two ways of doing this:

  1. on a per-model basis (using the vault application)

  2. on a per-application basis (using charm configuration options)

Note

The recommended way to manage TLS in Charmed OpenStack is with Vault. It is a centrally managed encryption solution, it is designed for the task, and it integrates well with charms.

Certificate management with Vault

First ensure that Vault is deployed to the model containing the cloud and the required post-deployment steps have been completed. See the vault charm README for instructions.

The next step is to add a CA certificate to the model.

Add a CA certificate

For Vault to be able to issue certificates on your behalf you must equip it with a CA certificate. This is done in one of two ways:

  1. a Vault-generated self-signed root CA certificate

  2. a third-party intermediate CA certificate

The Vault method is by far the simpler of the two.

Self-signed root CA certificate

To have Vault generate a self-signed root CA certificate:

juju run-action --wait vault/leader generate-root-ca

You’re done.

Third-party intermediate CA certificate

The supported workflow for a third-party certificate involves three steps:

  1. retrieve a Certificate Signing Request (CSR) for an intermediate CA from Vault

  2. transfer the CSR to an external CA to have a signed certificate created

  3. upload certificate information to Vault

Retrieve a CSR from Vault

To retrieve a Vault-generated CSR run the get-csr action on the leader unit:

juju run-action --wait vault/leader get-csr

Note

The CSR may be rejected by the signing CA due to incorrect values for certain properties (e.g. common-name). It would be prudent therefore to inquire before generating the CSR. Use command juju actions --schema vault for help on setting properties with action get-csr.

This will produce output similar to:

unit-vault-0:
  UnitId: vault/0
  id: "8"
  results:
    Stdout: |
      lxc
      lxc
      active
      lxc
    output: |-
      -----BEGIN CERTIFICATE REQUEST-----
      MIICijCCAXICAQAwRTFDMEEGA1UEAxM6VmF1bHQgSW50ZXJtZWRpYXRlIENlcnRp
      ZmljYXRlIEF1dGhvcml0eSAoY2hhcm0tcGtpLWxvY2FsKTCCASIwDQYJKoZIhvcN
      AQEBBQADggEPADCCAQoCggEBAJvof3Gut71YY9Ke3TlAYT+AoVUu8w0q2DKGh7dL
      5mUggcvThZuckbuj8IJZZ3pl5D114REcRRH9DIRxp4tH0TSmnb0PJLdjnuLyMQqy
      /IEipmSQWiILBF8c/QjYqEkvUoprADeJ+9L9KGc/axwuIoLWHqaXLnkSFzypgyz+
      9Qvxir4wSPvyygZVUDJvUoEekk/sMBidzpEaKuMF7U+aZAdlZvEPr39FilEwcUgQ
      EY2m3bDDe5maNcD6+la95ENuo0kuHF6wkjXuLGkzDV5xYBMtSO8sqymwRA1CPLyr
      WIA+ciDQ11Hy+1Q+YTurOoWzmr48QPlamCZEIz8BZeuf8vsCAwEAAaAAMA0GCSqG
      SIb3DQEBCwUAA4IBAQAoPhk5k5nXpFSYfbsOvm8Rc0hHUTfEHgB4xcQfzMrMTDMX
      fVmiJjGQhiM1q+eKNLLTDxuOGBBbyniQsveV6JZwpOlkOZ1YVdkw0EoaQndz6dEA
      JNjjelV2z1FxppKT3504uX/YkASTDnpb63aknE4W3C5aZSvyx/qw/WdUauCNnYoV
      NdFrzy0p2qm8kXwPsbjIwZTq/AqQ4t7UrNoXoONcxjAdq5UpuoBxgbRJJ7zr1RJp
      NUhVk/1qi9EQSGeigkuzGGPeRdBXvw4NXAXwnQfCiIBHgLEfkE3PVHNbXfVYqtjC
      3D2eeYPraKcSJIEts4DCJnbhj5FEzi1km9QgSZgA
      -----END CERTIFICATE REQUEST-----
  status: completed
  timing:
    completed: 2021-02-16 22:40:12 +0000 UTC
    enqueued: 2021-02-16 22:40:08 +0000 UTC
    started: 2021-02-16 22:40:09 +0000 UTC

Place the CSR data (minus any leading whitespace) in a file, say ~/csr_file. In this example, the file’s contents would be:

-----BEGIN CERTIFICATE REQUEST-----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-----END CERTIFICATE REQUEST-----
Have the CSR signed

The procedure for obtaining a signed certificate from an external CA is particular to the given CA, but it always entails sending the CSR to the CA (typically from its website) and waiting for a reply.

For informational purposes, an example CLI command is provided below. The exact command syntax is dependent upon the CA. Note the inclusion of the input file ~/csr_file:

openssl ca -config openssl.cnf -extensions v3_intermediate_ca -days 3650 \
   -notext -md sha256 -in ~/csr_file -out ~/vault-charm-int.pem -batch \
   -passin pass:secretpassword

The certificate is normally provided in PEM format, like the output file ~/vault-charm-int.pem in the above command. A root CA certificate should also be provided and placed in, say, file ~/root-ca.pem.

Upload the signed certificate and the root CA certificate to Vault

To upload certificate information to Vault run the upload-signed-csr action on the leader unit:

juju run-action --wait vault/leader upload-signed-csr \
    pem="$(cat ~/vault-charm-int.pem | base64)" \
    root-ca="$(cat ~/root-ca.pem | base64)" \
    allowed-domains='openstack.local'

The file that the pem parameter refers to must contain a PEM bundle consisting of:

  1. the signed certificate

  2. any other intermediate CA certificates

  3. the root CA certificate

The file that the root-ca parameter refers to must contain a PEM bundle consisting of:

  1. any other intermediate CA certificates

  2. the root CA certificate

Important

Omitting the (other) intermediate certificate information will result in the new certificate being rejected (due to an incomplete trust chain).

See the following resources:

  • RFC5280: for details concerning certificate paths and trust

  • RFC7468: for details on the format of certificate PEM bundles

Issuing of certificates

Now that Vault is in possession of a CA certificate it will be able to issue certificates to clients (API services). Client requests are made via the vault:certificates relation. For example:

juju add-relation keystone:certificates vault:certificates
juju add-relation nova-cloud-controller:certificates vault:certificates
juju add-relation cinder:certificates vault:certificates
juju add-relation neutron-api:certificates vault:certificates
juju add-relation glance:certificates vault:certificates

A request will result in the transfer of certificates and keys from Vault. The corresponding API endpoint will also be updated in Keystone’s service catalogue list to reflect that it is now using HTTPS. The service is now TLS-enabled.

A special client is mysql-innodb-cluster, the cloud database. It has a self-signed certificate but it is recommended to use the one signed by Vault’s CA:

juju add-relation mysql-innodb-cluster:certificates vault:certificates

Important

Once Keystone is TLS-enabled every application that talks to Keystone (i.e. there exists a relation between the two) must be in possession of the CA certificate. This is achieved as a side-effect when enabling TLS for that application.

Verification

To verify the CA certificate begin by sourcing the cloud init file and inspecting the certificate’s location and the Keystone API endpoint. The latter should be using HTTPS:

source novarc
env | grep -e OS_AUTH_URL -e OS_CACERT

Sample output is:

OS_CACERT=/home/ubuntu/snap/openstackclients/common/root-ca.crt
OS_AUTH_URL=https://10.0.0.215:5000/v3

API services can now be queried by referring explicitly to the certificate. The below tests correspond to the clients mentioned in the previous section:

# Keystone
openstack --os-cacert $OS_CACERT catalog list
# Nova
openstack --os-cacert $OS_CACERT server list
# Cinder
openstack --os-cacert $OS_CACERT volume list
# Neutron
openstack --os-cacert $OS_CACERT network list
# Glance
openstack --os-cacert $OS_CACERT image list

Reissuing of certificates

New certificates can be reissued to all TLS-enabled clients by means of the reissue-certificates action. See cloud operation Reissue TLS certificates across the cloud in the Admin Guide for details.