Series upgrade

The purpose of this document is to provide foundational knowledge for preparing an administrator to perform a series upgrade across a Charmed OpenStack cloud. This translates to upgrading the operating system of every cloud node to an entirely new version.

Please read the following before continuing:

Once this document has been studied the administrator will be ready to graduate to the Series upgrade OpenStack guide that describes the process in more detail.

Concerning the cloud being operated upon, the following is assumed:

  • It is being upgraded from one LTS series to another (e.g. xenial to bionic, bionic to focal, etc.).

  • Its nodes are backed by MAAS.

  • Its services are highly available.

  • It is being upgraded with minimal downtime.

Warning

Upgrading a single production machine from one LTS to another is a serious task. Doing so for every cloud node can be that much harder. Attempting to do this with minimal cloud downtime is an order of magnitude more complex.

Such an undertaking should be executed by persons who are intimately familiar with Juju and the currently deployed charms (and their related applications). It should first be tested on a non-production cloud that closely resembles the production environment.

Upgrade candidate availability

Ensure that there is an upgrade candidate available. Charmed OpenStack is primarily designed to run on Ubuntu LTS releases, and an Ubuntu system is configured, by default, to upgrade only to the next LTS. In addition, this will be possible only once the first LTS point release is published (see the Ubuntu releases wiki page for release date information). For example, an upgrade to Focal was possible starting on August 6, 2020.

Caution

The Juju tooling will initiate the upgrade process irrespective of whether an upgrade candidate is available or not. A cancelled upgrade is not fatal, but it will leave erroneous messaging in juju status output.

The Juju upgrade-series command

The Juju upgrade-series command is the cornerstone of the entire procedure. This command manages an operating system upgrade of a targeted machine and operates on every application unit hosted on that machine. The command works in conjunction with either the prepare or the complete sub-command.

The basic process is to inform the units on a machine that a series upgrade is about to commence, to perform the upgrade, and then inform the units that the upgrade has finished. In most cases with the OpenStack charms, units will first be paused and be left with a workload status of “blocked” and a message of “Ready for do-release-upgrade and reboot.”

For example, to inform units on machine ‘0’ that an upgrade (to series ‘bionic’) is about to occur:

juju upgrade-series 0 prepare bionic

The prepare sub-command causes all the charms (including subordinates) on the machine to run their pre-series-upgrade hook.

The administrator must then perform the traditional steps involved in upgrading the OS on the targeted machine (in this example, machine ‘0’). For example, update/upgrade packages with apt update && apt full-upgrade; invoke the do-release-upgrade command; and reboot the machine once complete.

The complete sub-command causes all the charms (including subordinates) on the machine to run their post-series-upgrade hook. In most cases with the OpenStack charms, configuration files will be re-written, units will be resumed automatically (if paused), and be left with a workload status of “active” and a message of “Unit is ready”:

juju upgrade-series 0 complete

At this point the series upgrade on the machine and its charms is now done. In the juju status output the machine’s entry under the Series column will have changed from ‘xenial’ to ‘bionic’.

Note

Charms are not obliged to support the two series upgrade hooks but they do make for a more intelligent and a less error-prone series upgrade.

Containers (and their charms) hosted on the target machine remain unaffected by this command. However, during the required post-upgrade reboot of the host all containerised services will naturally be unavailable.

See the Juju documentation to learn more about the series upgrade feature.

Pre-upgrade requirements

This is a list of requirements that apply to any cloud. They must be met before making any changes.

  • All the cloud nodes should be using the same series, be in good working order, and be updated with the latest stable software packages (APT upgrades).

  • The cloud should be running the latest OpenStack release supported by the current series. See Ubuntu OpenStack release cycle and OpenStack upgrade.

  • The cloud should be fully operational and error-free.

  • All currently deployed charms should be upgraded to the latest stable charm revision. See Charms upgrade.

  • The Juju model comprising the cloud should be error-free (e.g. there should be no charm hook errors).

Unattended upgrades

Automatic package updates should be disabled on a node that is about to undergo a series upgrade. This is to avoid potential conflicts with the manual (or scripted) APT steps. One way to achieve this is with:

sudo dpkg-reconfigure -plow unattended-upgrades

Once the upgrade is complete it is advised to re-enable unattended upgrades for security reasons.

Workload specific preparations

These are preparations that are specific to the current cloud deployment. Completing them in advance is an integral part of the upgrade.

Charm upgradability

Verify the documented series upgrade processes for all currently deployed charms. Some charms, especially third-party charms, may either not have implemented series upgrade yet or simply may not work with the target series. Pay particular attention to SDN (software defined networking) and storage charms as these play a crucial role in cloud operations.

Workload maintenance

Any workload-specific pre and post series upgrade maintenance tasks should be readied in advance. For example, if a node’s workload requires a database then a pre-upgrade backup plan should be drawn up. Similarly, if a workload requires settings to be adjusted post-upgrade then those changes should be prepared ahead of time. Pay particular attention to stateful services due to their importance in cloud operations. Examples include evacuating a compute node, switching an HA router to another node, and storage rebalancing.

Pre-upgrade tasks are performed before issuing the prepare subcommand, and post-upgrade tasks are done immediately prior to issuing the complete subcommand.

Workflow: sequential vs. concurrent

In terms of the workflow there are two approaches:

  • Sequential - upgrading one machine at a time

  • Concurrent - upgrading a group of machines simultaneously

Normally, it is best to upgrade sequentially as this ensures data reliability and availability (we’ve assumed an HA cloud). This approach also minimises adverse effects to the deployment if something goes wrong.

However, for even moderately sized clouds, an intervention based purely on a sequential approach can take a very long time to complete. This is where the concurrent method becomes attractive.

In general, a concurrent approach is a viable option for API applications but is not an option for stateful applications. During the course of the cloud-wide series upgrade a hybrid strategy is a reasonable choice.

To be clear, the above pertains to upgrading the series on machines associated with a single application. It is also possible however to employ similar thinking to multiple applications.

Application leadership

Application leadership plays a role in determining the order in which machines will have their series upgraded. The guiding principle is that an application’s non-leader units (if they exist) are upgraded (in no particular order) prior to its leader unit. There are exceptions to this however, and they will be indicated on the Series upgrade OpenStack page.

Note

Juju will not transfer the leadership of an application (and any subordinate) to another unit while the application is undergoing a series upgrade. This allows a charm to make assumptions that will lead to a more reliable outcome.

Assuming that a cloud is intended to eventually undergo a series upgrade, this guideline will generally influence the cloud’s topology. Containerisation is an effective response to this.

Important

Applications should be co-located on the same machine only if leadership plays a negligible role. Applications deployed with the compute and storage charms fall into this category.

Generic series upgrade

This section contains a generic overview of a series upgrade for three machines, each hosting a unit of the ubuntu application. The initial and target series are xenial and bionic, respectively.

This scenario is represented by the following juju status command output:

Model    Controller       Cloud/Region    Version  SLA          Timestamp
upgrade  maas-controller  mymaas/default  2.7.6    unsupported  18:33:49Z

App      Version  Status  Scale  Charm   Store       Rev  OS      Notes
ubuntu1  16.04    active      3  ubuntu  jujucharms   15  ubuntu

Unit        Workload  Agent  Machine  Public address  Ports  Message
ubuntu1/0*  active    idle   0        10.0.0.241             ready
ubuntu1/1   active    idle   1        10.0.0.242             ready
ubuntu1/2   active    idle   2        10.0.0.243             ready

Machine  State    DNS         Inst id  Series  AZ     Message
0        started  10.0.0.241  node2    xenial  zone3  Deployed
1        started  10.0.0.242  node3    xenial  zone4  Deployed
2        started  10.0.0.243  node1    xenial  zone5  Deployed

Important

The asterisk in the Unit column denotes the leader. Here, ubuntu1/0 is the leader and its machine ID is 0.

First ensure that any new applications will (by default) use the new series, in this case bionic. This is done by configuring at the model level:

juju model-config default-series=bionic

Now do the same at the application level. This will affect any new units of the existing application, in this case ‘ubuntu1’:

juju set-series ubuntu1 bionic

To perform the actual series upgrade we begin with a non-leader machine (1):

1# Perform any workload maintenance pre-upgrade steps here
2juju upgrade-series 1 prepare bionic
3juju ssh 1 sudo apt update
4juju ssh 1 sudo apt full-upgrade
5juju ssh 1 sudo do-release-upgrade
6# Perform any workload maintenance post-upgrade steps here
7# Reboot the machine (if not already done)
8juju upgrade-series 1 complete

Note

It is recommended to use a terminal multiplexer (e.g. tmux) in order to prevent a network disruption from breaking the invoked commands.

In this generic example there are no workload maintenance steps to perform. If there were post-upgrade steps then the prompt to reboot the machine at the end of do-release-upgrade should be answered in the negative and the reboot will be initiated manually on line 7 (i.e. sudo reboot).

It is possible to invoke the complete sub-command before the upgraded machine is ready to process it. Juju will block until the unit is ready after being restarted.

In lines 4 and 5 the upgrade proceeds in the usual interactive fashion. If a non-interactive mode is preferred, those two lines can be replaced with:

juju ssh 1 sudo DEBIAN_FRONTEND=noninteractive apt-get --assume-yes \
   -o "Dpkg::Options::=--force-confdef" \
   -o "Dpkg::Options::=--force-confold" dist-upgrade
juju ssh 1 sudo DEBIAN_FRONTEND=noninteractive \
   do-release-upgrade -f DistUpgradeViewNonInteractive

The apt-get command is preferred while in non-interactive mode (or with scripting).

By default, an LTS release will not have an upgrade candidate until the “point release” of the next LTS is published. You can override this policy by using the -d (development) option with the do-release-upgrade command.

Caution

Performing a series upgrade non-interactively can be risky so the decision to do so should be made only after careful deliberation.

The remaining non-leader machine (2) is then upgraded:

juju upgrade-series 2 prepare bionic
...
...

Finally, the leader machine (0) is upgraded in the same way.

Next steps

When you are ready to perform a series upgrade across your cloud proceed to the Series upgrade OpenStack page.