Container Image Preparation¶

This documentation explains how to instruct container image preparation to do different preparation tasks.

Choosing an image registry strategy¶

Container images need to be pulled from an image registry which is reliably available to overcloud nodes. The three common options to serve images are to use the default registry, the registry available on the undercloud, or an independently managed registry.

Note

Private SSL-enabled registries with a custom CA are not tested. If you have to use one, the custom CA (certificate authority) that is needed for the registry should be installed before deploying the overcloud. For example, it can be injected into the overcloud image, or installed via first boot scripts.

During deployment the environment parameter ContainerImagePrepare is used to specify any desired behaviour, including:

Where to pull images from
Optionally, which local repository to push images to
How to discover the latest versioned tag for each image

In the following examples, the parameter ContainerImagePrepare will be specified in its own file containers-prepare-parameters.yaml.

Default registry¶

By default the images will be pulled from a remote registry namespace such as docker.io/tripleomaster. This is fine for development or POC clouds but is not appropriate for production clouds due to the transfer of large amounts of duplicate image data over a potentially unreliable internet connection.

During deployment with this default, any heat parameters which refer to required container images will be populated with a value pointing at the default registry, with a tag representing the latest image version.

To generate the containers-prepare-parameters.yaml containing these defaults, run this command:

openstack tripleo container image prepare default \
  --output-env-file containers-prepare-parameters.yaml

This will generate a file containing a ContainerImagePrepare similar to the following:

parameter_defaults:
  ContainerImagePrepare:
  - set:
      ceph_image: daemon
      ceph_namespace: docker.io/ceph
      ceph_tag: v4.0.0-stable-4.0-nautilus-centos-7-x86_64
      name_prefix: centos-binary-
      name_suffix: ''
      namespace: docker.io/tripleomaster
      neutron_driver: null
      tag: current-tripleo
    tag_from_label: rdo_version

During deployment, this will lookup images in docker.io/tripleomaster tagged with current-tripleo and discover a versioned tag by looking up the label rdo_version. This will result in the heat image parameters in the plan being set with appropriate values, such as:

DockerNeutronMetadataImage: docker.io/tripleomaster/centos-binary-neutron-metadata-agent:35414701c176a6288fc2ad141dad0f73624dcb94_43527485
DockerNovaApiImage: docker.io/tripleomaster/centos-binary-nova-api:35414701c176a6288fc2ad141dad0f73624dcb94_43527485

Note

The tag is actually a Delorean hash. You can find out the versions of packages by using this tag. For example, 35414701c176a6288fc2ad141dad0f73624dcb94_43527485 tag, is in fact using this Delorean repository.

Undercloud registry¶

As part of the undercloud install, an image registry is configured on port 8787. This can be used to increase reliability of image pulls, and minimise overall network transfers. The undercloud registry can be used by generating the following containers-prepare-parameters.yaml file:

openstack tripleo container image prepare default \
  --local-push-destination \
  --output-env-file containers-prepare-parameters.yaml

This will generate a file containing a ContainerImagePrepare similar to the following:

parameter_defaults:
  ContainerImagePrepare:
  - push_destination: true
    set:
      ceph_image: daemon
      ceph_namespace: docker.io/ceph
      ceph_tag: v4.0.0-stable-4.0-nautilus-centos-7-x86_64
      name_prefix: centos-binary-
      name_suffix: ''
      namespace: docker.io/tripleomaster
      neutron_driver: null
      tag: current-tripleo
    tag_from_label: rdo_version

This is identical to the default registry, except for the push_destination: true entry which indicates that the address of the local undercloud registry will be discovered at upload time.

By specifying a push_destination value such as 192.168.24.1:8787, during deployment all images will be pulled from the remote registry then pushed to the specified registry. The resulting image parameters will also be modified to refer to the images in push_destination instead of namespace.

Stein and newer

Prior to Stein, Docker Registry v2 (provided by “Docker Distribution” package), was the service running on tcp 8787. Since Stein it has been replaced with an Apache vhost called “image-serve”, which serves the containers on tcp 8787 and supports podman or buildah pull commands. Though podman or buildah tag, push, and commit commands are not supported, they are not necessary because the same functionality may be achieved through use of the “sudo openstack tripleo container image prepare” commands described in this document.

Running container image prepare¶

The prepare operations are run at the following times:

During undercloud install when undercloud.conf has container_images_file=$HOME/containers-prepare-parameters.yaml (see Installing the Undercloud)
During overcloud deploy when a ContainerImagePrepare parameter is provided by including the argument -e $HOME/containers-prepare-parameters.yaml (see Deploying the containerized Overcloud)
Any other time when sudo openstack tripleo container image prepare is run

As seen in the last of the above commands, sudo openstack tripleo container image prepare may be run without default to set up an undercloud registry without deploying the overcloud. It is run with sudo because it needs to write to /var/lib/image-serve on the undercloud.

Options available in heat parameter ContainerImagePrepare¶

To do something different to the above two registry scenarios, your custom environment can set the value of the ContainerImagePrepare heat parameter to result in any desired registry and image scenario.

Discovering versioned tags with tag_from_label¶

If you want these parameters to have the actual tag current-tripleo instead of the discovered tag (in this case the Delorean hash, 35414701c176a6288fc2ad141dad0f73624dcb94_43527485 ) then the tag_from_label entry can be omitted.

Likewise, if all images should be deployed with a different tag, the value of tag can be set to the desired tag.

Some build pipelines have a versioned tag which can only be discovered via a combination of labels. For this case, a template format can be specified instead:

tag_from_label: {version}-{release}

It’s possible to use the above feature while also disabling it only for a subset of images by using an includes and excludes list as described later in this document. This is useful when using the above but also using containers from external projects which doesn’t follow the same convention like Ceph.

Copying images with push_destination¶

By specifying a push_destination, the required images will be copied from namespace to this registry, for example:

ContainerImagePrepare:
- push_destination: 192.168.24.1:8787
  set:
    namespace: docker.io/tripleomaster
    ...

This will result in images being copied from docker.io/tripleomaster to 192.168.24.1:8787/tripleomaster and heat parameters set with values such as:

DockerNeutronMetadataImage: 192.168.24.1:8787/tripleomaster/centos-binary-neutron-metadata-agent:35414701c176a6288fc2ad141dad0f73624dcb94_43527485
DockerNovaApiImage: 192.168.24.1:8787/tripleomaster/centos-binary-nova-api:35414701c176a6288fc2ad141dad0f73624dcb94_43527485

Note

Use the IP address of your undercloud, which you previously set with the local_ip parameter in your undercloud.conf file. For these example commands, the address is assumed to be 192.168.24.1:8787.

By setting different values for namespace and push_destination any alternative registry strategy can be specified.

Ceph and other set options¶

The options ceph_namespace, ceph_image, and ceph_tag are similar to namespace and tag but they specify the values for the ceph image. It will often come from a different registry, and have a different versioned tag policy.

The values in the set map are used when evaluating the file /usr/share/openstack-tripleo-common/container-images/tripleo_containers.yaml.j2 as a Jinja2 template. This file contains the list of every container image and how it relates to TripleO services and heat parameters. If Ceph is not part of the overcloud deployment, it’s possible to skip pulling the related containers by setting the ceph_images parameter to false as shown in the example below:

ContainerImagePrepare:
- push_destination: 192.168.24.1:8787
  set:
    ceph_images: false

By doing this, the Ceph container images are not pulled from the remote registry during the deployment.

Authenticated Registries¶

If a container registry requires a username and password, then those values may be passed using the following syntax:

ContainerImagePrepare:
- push_destination: 192.168.24.1:8787
  set:
    namespace: quay.io/...
    ...
ContainerImageRegistryCredentials:
  'quay.io': {'<your_quay_username>': '<your_quay_password>'}

Note

If the ContainerImageRegistryCredentials contain the credentials for a registry whose name matches the ceph_namespace parameter, those credentials will be extracted and passed to ceph-ansible as the ceph_docker_registry_username and ceph_docker_registry_password parameters.

Layering image preparation entries¶

Since the value of ContainerImagePrepare is a list, multiple entries can be specified, and later entries will overwrite any earlier ones. Consider the following:

ContainerImagePrepare:
- tag_from_label: rdo_version
  push_destination: true
  excludes:
  - nova-api
  set:
    namespace: docker.io/tripleomaster
    name_prefix: centos-binary-
    name_suffix: ''
    tag: current-tripleo
- push_destination: true
  includes:
  - nova-api
  set:
    namespace: mylocal
    tag: myhotfix

This will result in the following heat parameters which shows a locally built <build_container_images> and tagged centos-binary-nova-api being used for DockerNovaApiImage:

DockerNeutronMetadataImage: 192.168.24.1:8787/tripleomaster/centos-binary-neutron-metadata-agent:35414701c176a6288fc2ad141dad0f73624dcb94_43527485
DockerNovaApiImage: 192.168.24.1:8787/mylocal/centos-binary-nova-api:myhotfix

The includes and excludes entries can control the resulting image list in addition to the filtering which is determined by roles and containerized services in the plan. includes matches take precedence over excludes matches, followed by role/service filtering. The image name must contain the value within it to be considered a match.

The includes and excludes list is useful when pulling OpenStack images using tag_from_label: ‘{version}-{release}’ while also pulling images which are not tagged the same way. The following example shows how to do this with Ceph:

ContainerImagePrepare:
- push_destination: true
  set:
    namespace: docker.io/tripleomaster
    name_prefix: centos-binary-
    name_suffix: ''
    tag: current-tripleo
  tag_from_label: '{version}-{release}'
  excludes: [ceph]
- push_destination: true
  set:
    ceph_image: ceph
    ceph_namespace: docker.io/ceph
    ceph_tag: latest
  includes: [ceph]

Modifying images during prepare¶

It is possible to modify images during prepare to make any required changes, then immediately deploy with those changes. The use-cases for modifying images include:

As part of a Continuous Integration pipeline where images are modified with the changes being tested before deployment
As part of a development workflow where local changes need to be deployed for testing and development
When changes need to be deployed but are not available through an image build pipeline (proprietary addons, emergency fixes)

The modification is done by invoking an ansible role on each image which needs to be modified. The role takes a source image, makes the requested changes, then tags the result. The prepare can then push the image and set the heat parameters to refer to the modified image. The modification is done in the undercloud registry so it is not possible to use this feature when using the Default registry, where images are pulled directly from a remote registry during deployment.

The ansible role tripleo-modify-image conforms with the required role interface, and provides the required behaviour for the modify use-cases. Modification is controlled via modify-specific keys in the ContainerImagePrepare parameter:

modify_role specifies what ansible role to invoke for each image to modify.
modify_append_tag is used to append to the end of the source image tag. This makes it obvious that the resulting image has been modified. It is also used to skip modification if the push_destination registry already has that image, so it is recommended to change modify_append_tag whenever the image must be modified.
modify_vars is a dictionary of ansible variables to pass to the role.

The different use-cases handled by role tripleo-modify-image are selected by setting the tasks_from variable to the required file in that role. For all of the following examples, see the documentation for the role tripleo-modify-image for the other variables supported by that tasks_from.

While developing and testing the ContainerImagePrepare entries which modify images, it is recommended to run prepare on its own to confirm it is being modified as expected:

sudo openstack tripleo container image prepare \
  -e ~/containers-prepare-parameters.yaml

Updating existing packages¶

The following entries will result in all packages being updated in the images, but using the undercloud host’s yum repository configuration:

ContainerImagePrepare:
- push_destination: true
  ...
  modify_role: tripleo-modify-image
  modify_append_tag: "-updated"
  modify_vars:
    tasks_from: yum_update.yml
    compare_host_packages: true
    yum_repos_dir_path: /etc/yum.repos.d
  ...

Install RPM files¶

It is possible to install a directory of RPM files, which is useful for installing hotfixes, local package builds, or any package which is not available through a package repository. For example the following would install some hotfix packages only in the centos-binary-nova-compute image:

ContainerImagePrepare:
- push_destination: true
  ...
  includes:
  - nova-compute
  modify_role: tripleo-modify-image
  modify_append_tag: "-hotfix"
  modify_vars:
    tasks_from: rpm_install.yml
    rpms_path: /home/stack/nova-hotfix-pkgs
  ...

Modify with custom Dockerfile¶

For maximum flexibility, it is possible to specify a directory containing a Dockerfile to make the required changes. When the role is invoked, a Dockerfile.modified is generated which changes the FROM directive and adds extra LABEL directives. The following example runs the custom Dockerfile on the centos-binary-nova-compute image:

ContainerImagePrepare:
- push_destination: true
  ...
  includes:
  - nova-compute
  modify_role: tripleo-modify-image
  modify_append_tag: "-hotfix"
  modify_vars:
    tasks_from: modify_image.yml
    modify_dir_path: /home/stack/nova-custom
  ...

An example /home/stack/nova-custom/Dockerfile follows. Note that after any USER root directives have been run, it is necessary to switch back to the original image default user:

FROM docker.io/tripleomaster/centos-binary-nova-compute:latest

USER root

COPY customize.sh /tmp/
RUN /tmp/customize.sh

USER "nova"

Modify with Python source code installed via pip from OpenDev Gerrit¶

If you would like to build an image and apply your patch in a Python project in OpenStack, you can use this example:

ContainerImagePrepare:
- push_destination: true
  ...
  includes:
  - heat-api
  modify_role: tripleo-modify-image
  modify_append_tag: "-devel"
  modify_vars:
    tasks_from: dev_install.yml
    source_image: docker.io/tripleomaster/centos-binary-heat-api:current-tripleo
    refspecs:
      -
        project: heat
        refspec: refs/changes/12/1234/3
  ...

It will produce a modified image with Python source code installed via pip.

Building hotfixed containers¶

The tripleoclient OpenStack plugin provides a command line interface which will allow operators to apply packages (hotfixes) to running containers. This capability leverages the tripleo-modify-image role, and automates its application to a set of containers for a given collection of packages.

Using the provided command line interface is simple. The interface has very few required options. The noted options below inform the tooling which containers need to have the hotfix(es) applied, and where to find the hotfixed package(s).

option	Description
–image	The –image argument requires the use fully qualified image name, something like localhost/image/name:tag-data. The –image option can be used more than once, which will inform the tooling that multiple containers need to have the same hotfix packages applied.
–rpms-path	The –rpms-path argument requires the full path to a directory where RPMs exist. The RPMs within this directory will be installed into the container, producing a new layer for an existing container.
–tag	The –tag argument is optional, though it is recommended to be used. The value of this option will append to the tag of the running container. By using the tag argument, images that have been modified can be easily identified.

With all of the required information, the command to modify existing container images can be executed like so.

# The shell variables need to be replaced with data that pertains to the given environment.
openstack tripleo container image hotfix --image ${FULLY_QUALIFIED_IMAGE_NAME} \
                                         --rpms-path ${RPM_DIRECTORY} \
                                         --tag ${TAG_VALUE}

When this command completes, new container images will be available on the local system and are ready to be integrated into the environment.

You should see the image built on your local system via buildah CLI:

# The shell variables need to be replaced with data that pertains to the given environment.
sudo buildah images | grep ${TAG_VALUE}

Here is an example on how to push it into the TripleO Container registry:

# ${IMAGE} is in this format: <registry>/<namespace>/<name>:<tag>
sudo openstack tripleo container image push --local \
     --registry-url 192.168.24.1:8787 ${IMAGE}

Note

Container images can be pushed to the TripleO Container registry or a Docker Registry (using basic auth or the bearer token auth).

Now that your container image is pushed into a registry, you can deploy it where it’s needed. Two ways are supported:

(Long but persistent): Update Container$NameImage where $Name is the name of the service we update (e.g. ContainerNovaComputeImage). The parameters can be found in TripleO Heat Templates. Once you update it into your environment, you need to re-run the “openstack overcloud deploy” command again and the necessary hosts will get the new container.

Example:
```
parameter_defaults:
    # Replace the values by where the image is stored
    ContainerNovaComputeImage: <registry>/<namespace>/<name>:<tag>
```
(Short but not persistent after a minor update): Run Paunch or Ansible to update the container on a host. The procedure is already documented in the Tips and Tricks for containerizing services manual.

Once the hotfixed container image has been deployed, it’s very important to check that the container is running with the right rpm version. For example, if the nova-compute container was updated with a new hotfix image, we want to check that the right nova-compute rpm is installed:

sudo podman exec -ti -u root nova_compute rpm -qa | grep nova-compute

It will return the version of the openstack-nova-compute rpm and we can compare it with the one that was delivered via rpm. If the version is not correct (e.g. older), it means that the hotfix image is wrong and doesn’t contain the rpm provided to build the new image. The image has to be rebuilt and redeployed.

Container Image Preparation

Container Image Preparation¶

Choosing an image registry strategy¶

Default registry¶

Undercloud registry¶

Running container image prepare¶

Options available in heat parameter ContainerImagePrepare¶

Discovering versioned tags with tag_from_label¶

Copying images with push_destination¶

Ceph and other set options¶

Authenticated Registries¶

Layering image preparation entries¶

Modifying images during prepare¶

Updating existing packages¶

Install RPM files¶

Modify with custom Dockerfile¶

Modify with Python source code installed via pip from OpenDev Gerrit¶

Building hotfixed containers¶

TripleO 3.0.0

Page Contents