Liberty -  Liberty -  Liberty -  Liberty -  Liberty -  Liberty -  Liberty -  Liberty - 
 iSCSI configuration

Set the following in your cinder.conf configuration file for setup of an iSCSI array, replacing the variables using the guide in the following section:

volume_driver = cinder.volume.drivers.violin.v6000_iscsi.V6000ISCSIDriver
san_thin_provision = True
san_ip = VMEM_MGMT_IP
san_login = VMEM_USER_NAME
san_password = VMEM_PASSWORD
iscsi_target_prefix = iqn.2004-02.com.vmem:
iscsi_port = 3260
iscsi_ip_address = CINDER_INITIATOR_IP
gateway_mga = VMEM_MGA_IP
gateway_mgb = VMEM_MGB_IP
      
Questions? Discuss on ask.openstack.org
Found an error? Report a bug against this page

loading table of contents...