Atom feed of this document
  
Juno -  Juno -  Juno -  Juno -  Juno -  Juno -  Juno -  Juno - 

 Brocade Fibre Channel Zone Driver

Brocade Fibre Channel Zone Driver performs zoning operations via SSH. Configure Brocade Zone Driver and lookup service by specifying the following parameters:

Table 1.40. Description of zoning manager configuration options
Configuration option = Default value Description
[fc-zone-manager]
brcd_sb_connector = cinder.zonemanager.drivers.brocade.brcd_fc_zone_client_cli.BrcdFCZoneClientCLI (StrOpt) Southbound connector for zoning operation
cisco_sb_connector = cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI (StrOpt) Southbound connector for zoning operation
fc_san_lookup_service = cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService (StrOpt) FC San Lookup Service
zone_driver = cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver (StrOpt) FC Zone Driver responsible for zone management

Configure SAN fabric parameters in the form of fabric groups as described in the example below:

Table 1.41. Description of zoning fabrics configuration options
Configuration option = Default value Description
[BRCD_FABRIC_EXAMPLE]
fc_fabric_address = (StrOpt) Management IP of fabric
fc_fabric_password = (StrOpt) Password for user
fc_fabric_port = 22 (IntOpt) Connecting port
fc_fabric_user = (StrOpt) Fabric user ID
principal_switch_wwn = None (StrOpt) Principal switch WWN of the fabric
zone_activate = True (BoolOpt) overridden zoning activation state
zone_name_prefix = None (StrOpt) overridden zone name prefix
zoning_policy = initiator-target (StrOpt) overridden zoning policy
[CISCO_FABRIC_EXAMPLE]
cisco_fc_fabric_address = (StrOpt) Management IP of fabric
cisco_fc_fabric_password = (StrOpt) Password for user
cisco_fc_fabric_port = 22 (IntOpt) Connecting port
cisco_fc_fabric_user = (StrOpt) Fabric user ID
cisco_zone_activate = True (BoolOpt) overridden zoning activation state
cisco_zone_name_prefix = None (StrOpt) overridden zone name prefix
cisco_zoning_policy = initiator-target (StrOpt) overridden zoning policy
cisco_zoning_vsan = None (StrOpt) VSAN of the Fabric

[Note]Note

Define a fabric group for each fabric using the fabric names used in fc_fabric_names configuration option as group name.

Questions? Discuss on ask.openstack.org
Found an error? Report a bug against this page

loading table of contents...