Atom feed of this document
  
Juno -  Juno -  Juno -  Juno -  Juno -  Juno -  Juno -  Juno - 
 Modular Layer 2 (ml2) Cisco Mechanism configuration options

Table 8.21. Description of ML2 Cisco mechanism driver configuration options
Configuration option = Default value Description
[DEFAULT]
apic_system_id = openstack (StrOpt) Prefix for APIC domain/names/profiles created
[ml2_cisco]
managed_physical_network = None (StrOpt) The physical network managed by the switches.
[ml2_cisco_apic]
apic_agent_poll_interval = 2 (FloatOpt) Interval between agent poll for topology (in sec)
apic_agent_report_interval = 30 (FloatOpt) Interval between agent status updates (in sec)
apic_app_profile_name = ${apic_system_id}_app (StrOpt) Name for the app profile used for Openstack
apic_domain_name = ${apic_system_id} (StrOpt) Name for the domain created on APIC
apic_entity_profile = ${apic_system_id}_entity_profile (StrOpt) Name of the entity profile to be created
apic_function_profile = ${apic_system_id}_function_profile (StrOpt) Name of the function profile to be created
apic_host_uplink_ports = (ListOpt) The uplink ports to check for ACI connectivity
apic_hosts = (ListOpt) An ordered list of host names or IP addresses of the APIC controller(s).
apic_lacp_profile = ${apic_system_id}_lacp_profile (StrOpt) Name of the LACP profile to be created
apic_name_mapping = use_name (StrOpt) Name mapping strategy to use: use_uuid | use_name
apic_node_profile = ${apic_system_id}_node_profile (StrOpt) Name of the node profile to be created
apic_password = None (StrOpt) Password for the APIC controller
apic_sync_interval = 0 (IntOpt) Synchronization interval in seconds
apic_use_ssl = True (BoolOpt) Use SSL to connect to the APIC controller
apic_username = None (StrOpt) Username for the APIC controller
apic_vlan_ns_name = ${apic_system_id}_vlan_ns (StrOpt) Name for the vlan namespace to be used for Openstack
apic_vlan_range = 2:4093 (StrOpt) Range of VLAN's to be used for Openstack
apic_vpc_pairs = (ListOpt) The switch pairs for VPC connectivity
root_helper = sudo /usr/local/bin/neutron-rootwrap /etc/neutron/rootwrap.conf (StrOpt) Setup root helper as rootwrap or sudo

Questions? Discuss on ask.openstack.org
Found an error? Report a bug against this page

loading table of contents...