[ English | español | Deutsch | русский | Indonesia | English (United Kingdom) ]
Contoh lingkungan yang diarahkan¶
Bagian ini menjelaskan contoh lingkungan produksi untuk penyebaran OpenStack-Ansible (OSA) yang berfungsi dengan layanan ketersediaan tinggi di mana jaringan penyedia dan konektivitas antara mesin fisik dialihkan (layer 3).
Lingkungan contoh ini memiliki karakteristik sebagai berikut:
Tiga host infrastruktur (control plane)
Dua host komputasi
Satu perangkat penyimpanan NFS
Satu host agregasi log
Multiple Network Interface Cards (NIC) dikonfigurasikan sebagai pasangan berikat untuk setiap host
Compute kit lengkap dengan layanan Telemetri (ceilometer) disertakan, dengan NFS dikonfigurasikan sebagai backend penyimpanan untuk layanan Image (glance), dan Block Storage (cinder)
Rute statis ditambahkan untuk memungkinkan komunikasi antara Management, Tunnel, dan Storage Network setiap pod. Alamat gateway adalah alamat yang dapat digunakan pertama dalam setiap subnet jaringan.
Konfigurasi jaringan¶
Penetapan CIDR/VLAN jaringan¶
Penugasan CIDR berikut digunakan untuk lingkungan ini.
Network |
CIDR |
VLAN |
---|---|---|
POD 1 Management Network |
172.29.236.0/24 |
10 |
POD 1 Tunnel (VXLAN) Network |
172.29.237.0/24 |
30 |
POD 1 Storage Network |
172.29.238.0/24 |
20 |
POD 2 Management Network |
172.29.239.0/24 |
10 |
POD 2 Tunnel (VXLAN) Network |
172.29.240.0/24 |
30 |
POD 2 Storage Network |
172.29.241.0/24 |
20 |
POD 3 Management Network |
172.29.242.0/24 |
10 |
POD 3 Tunnel (VXLAN) Network |
172.29.243.0/24 |
30 |
POD 3 Storage Network |
172.29.244.0/24 |
20 |
POD 4 Management Network |
172.29.245.0/24 |
10 |
POD 4 Tunnel (VXLAN) Network |
172.29.246.0/24 |
30 |
POD 4 Storage Network |
172.29.247.0/24 |
20 |
IP assignments¶
Nama host dan alamat IP berikut digunakan untuk lingkungan ini.
Host name |
Management IP |
Tunnel (VxLAN) IP |
Storage IP |
---|---|---|---|
lb_vip_address |
172.29.236.9 |
||
infra1 |
172.29.236.10 |
172.29.237.10 |
|
infra2 |
172.29.239.10 |
172.29.240.10 |
|
infra3 |
172.29.242.10 |
172.29.243.10 |
|
log1 |
172.29.236.11 |
||
NFS Storage |
172.29.244.15 |
||
compute1 |
172.29.245.10 |
172.29.246.10 |
172.29.247.10 |
compute2 |
172.29.245.11 |
172.29.246.11 |
172.29.247.11 |
Konfigurasi jaringan host¶
Setiap host akan membutuhkan jembatan jaringan (network bridge) yang benar untuk diimplementasikan. Berikut ini adalah file /etc/network/interfaces
untuk infra1
.
Catatan
Jika lingkungan Anda tidak memiliki eth0
, tetapi sebaliknya memiliki p1p1
atau nama antarmuka lainnya, pastikan bahwa semua referensi ke eth0
di semua file konfigurasi diganti dengan nama yang sesuai. Hal yang sama berlaku untuk antarmuka jaringan tambahan.
# This is a multi-NIC bonded configuration to implement the required bridges
# for OpenStack-Ansible. This illustrates the configuration of the first
# Infrastructure host and the IP addresses assigned should be adapted
# for implementation on the other hosts.
#
# After implementing this configuration, the host will need to be
# rebooted.
# Assuming that eth0/1 and eth2/3 are dual port NIC's we pair
# eth0 with eth2 and eth1 with eth3 for increased resiliency
# in the case of one interface card failing.
auto eth0
iface eth0 inet manual
bond-master bond0
bond-primary eth0
auto eth1
iface eth1 inet manual
bond-master bond1
bond-primary eth1
auto eth2
iface eth2 inet manual
bond-master bond0
auto eth3
iface eth3 inet manual
bond-master bond1
# Create a bonded interface. Note that the "bond-slaves" is set to none. This
# is because the bond-master has already been set in the raw interfaces for
# the new bond0.
auto bond0
iface bond0 inet manual
bond-slaves none
bond-mode active-backup
bond-miimon 100
bond-downdelay 200
bond-updelay 200
# This bond will carry VLAN and VXLAN traffic to ensure isolation from
# control plane traffic on bond0.
auto bond1
iface bond1 inet manual
bond-slaves none
bond-mode active-backup
bond-miimon 100
bond-downdelay 250
bond-updelay 250
# Container/Host management VLAN interface
auto bond0.10
iface bond0.10 inet manual
vlan-raw-device bond0
# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
auto bond1.30
iface bond1.30 inet manual
vlan-raw-device bond1
# Storage network VLAN interface (optional)
auto bond0.20
iface bond0.20 inet manual
vlan-raw-device bond0
# Container/Host management bridge
auto br-mgmt
iface br-mgmt inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
bridge_ports bond0.10
address 172.29.236.10
netmask 255.255.255.0
gateway 172.29.236.1
dns-nameservers 8.8.8.8 8.8.4.4
# OpenStack Networking VXLAN (tunnel/overlay) bridge
#
# The COMPUTE, NETWORK and INFRA nodes must have an IP address
# on this bridge.
#
auto br-vxlan
iface br-vxlan inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
bridge_ports bond1.30
address 172.29.237.10
netmask 255.255.252.0
# OpenStack Networking VLAN bridge
auto br-vlan
iface br-vlan inet manual
bridge_stp off
bridge_waitport 0
bridge_fd 0
bridge_ports bond1
# compute1 Network VLAN bridge
#auto br-vlan
#iface br-vlan inet manual
# bridge_stp off
# bridge_waitport 0
# bridge_fd 0
#
# For tenant vlan support, create a veth pair to be used when the neutron
# agent is not containerized on the compute hosts. 'eth12' is the value used on
# the host_bind_override parameter of the br-vlan network section of the
# openstack_user_config example file. The veth peer name must match the value
# specified on the host_bind_override parameter.
#
# When the neutron agent is containerized it will use the container_interface
# value of the br-vlan network, which is also the same 'eth12' value.
#
# Create veth pair, do not abort if already exists
# pre-up ip link add br-vlan-veth type veth peer name eth12 || true
# Set both ends UP
# pre-up ip link set br-vlan-veth up
# pre-up ip link set eth12 up
# Delete veth pair on DOWN
# post-down ip link del br-vlan-veth || true
# bridge_ports bond1 br-vlan-veth
# Storage bridge (optional)
#
# Only the COMPUTE and STORAGE nodes must have an IP address
# on this bridge. When used by infrastructure nodes, the
# IP addresses are assigned to containers which use this
# bridge.
#
auto br-storage
iface br-storage inet manual
bridge_stp off
bridge_waitport 0
bridge_fd 0
bridge_ports bond0.20
# compute1 Storage bridge
#auto br-storage
#iface br-storage inet static
# bridge_stp off
# bridge_waitport 0
# bridge_fd 0
# bridge_ports bond0.20
# address 172.29.247.10
# netmask 255.255.255.0
Konfigurasi penempatan (deployment)¶
Tata letak lingkungan¶
File /etc/openstack_deploy/openstack_user_config.yml
mendefinisikan tata letak lingkungan.
Untuk setiap pod, sebuah grup harus didefinisikan berisi semua host dalam pod itu.
Dalam jaringan penyedia yang ditentukan, address_prefix
digunakan untuk mengganti awalan kunci yang ditambahkan ke setiap host yang berisi informasi alamat IP. Ini biasanya salah satu dari container
, tunnel
, atau storage
. reference_group
berisi nama grup pod yang ditentukan dan digunakan untuk membatasi ruang lingkup setiap jaringan penyedia ke grup itu.
Rute statis ditambahkan untuk memungkinkan komunikasi jaringan penyedia antar pod.
Konfigurasi berikut menjelaskan tata letak untuk lingkungan ini.
---
cidr_networks:
pod1_container: 172.29.236.0/24
pod2_container: 172.29.237.0/24
pod3_container: 172.29.238.0/24
pod4_container: 172.29.239.0/24
pod1_tunnel: 172.29.240.0/24
pod2_tunnel: 172.29.241.0/24
pod3_tunnel: 172.29.242.0/24
pod4_tunnel: 172.29.243.0/24
pod1_storage: 172.29.244.0/24
pod2_storage: 172.29.245.0/24
pod3_storage: 172.29.246.0/24
pod4_storage: 172.29.247.0/24
used_ips:
- "172.29.236.1,172.29.236.50"
- "172.29.237.1,172.29.237.50"
- "172.29.238.1,172.29.238.50"
- "172.29.239.1,172.29.239.50"
- "172.29.240.1,172.29.240.50"
- "172.29.241.1,172.29.241.50"
- "172.29.242.1,172.29.242.50"
- "172.29.243.1,172.29.243.50"
- "172.29.244.1,172.29.244.50"
- "172.29.245.1,172.29.245.50"
- "172.29.246.1,172.29.246.50"
- "172.29.247.1,172.29.247.50"
global_overrides:
#
# The below domains name must resolve to an IP address
# in the CIDR specified in haproxy_keepalived_external_vip_cidr and
# haproxy_keepalived_internal_vip_cidr.
# If using different protocols (https/http) for the public/internal
# endpoints the two addresses must be different.
#
internal_lb_vip_address: internal-openstack.example.com
external_lb_vip_address: openstack.example.com
management_bridge: "br-mgmt"
provider_networks:
- network:
container_bridge: "br-mgmt"
container_type: "veth"
container_interface: "eth1"
ip_from_q: "pod1_container"
address_prefix: "management"
type: "raw"
group_binds:
- all_containers
- hosts
reference_group: "pod1_hosts"
is_management_address: true
# Containers in pod1 need routes to the container networks of other pods
static_routes:
# Route to container networks
- cidr: 172.29.236.0/22
gateway: 172.29.236.1
- network:
container_bridge: "br-mgmt"
container_type: "veth"
container_interface: "eth1"
ip_from_q: "pod2_container"
address_prefix: "management"
type: "raw"
group_binds:
- all_containers
- hosts
reference_group: "pod2_hosts"
is_management_address: true
# Containers in pod2 need routes to the container networks of other pods
static_routes:
# Route to container networks
- cidr: 172.29.236.0/22
gateway: 172.29.237.1
- network:
container_bridge: "br-mgmt"
container_type: "veth"
container_interface: "eth1"
ip_from_q: "pod3_container"
address_prefix: "management"
type: "raw"
group_binds:
- all_containers
- hosts
reference_group: "pod3_hosts"
is_management_address: true
# Containers in pod3 need routes to the container networks of other pods
static_routes:
# Route to container networks
- cidr: 172.29.236.0/22
gateway: 172.29.238.1
- network:
container_bridge: "br-mgmt"
container_type: "veth"
container_interface: "eth1"
ip_from_q: "pod4_container"
address_prefix: "management"
type: "raw"
group_binds:
- all_containers
- hosts
reference_group: "pod4_hosts"
is_management_address: true
# Containers in pod4 need routes to the container networks of other pods
static_routes:
# Route to container networks
- cidr: 172.29.236.0/22
gateway: 172.29.239.1
- network:
container_bridge: "br-vxlan"
container_type: "veth"
container_interface: "eth10"
ip_from_q: "pod1_tunnel"
address_prefix: "tunnel"
type: "vxlan"
range: "1:1000"
net_name: "vxlan"
group_binds:
- neutron_linuxbridge_agent
reference_group: "pod1_hosts"
# Containers in pod1 need routes to the tunnel networks of other pods
static_routes:
# Route to tunnel networks
- cidr: 172.29.240.0/22
gateway: 172.29.240.1
- network:
container_bridge: "br-vxlan"
container_type: "veth"
container_interface: "eth10"
ip_from_q: "pod2_tunnel"
address_prefix: "tunnel"
type: "vxlan"
range: "1:1000"
net_name: "vxlan"
group_binds:
- neutron_linuxbridge_agent
reference_group: "pod2_hosts"
# Containers in pod2 need routes to the tunnel networks of other pods
static_routes:
# Route to tunnel networks
- cidr: 172.29.240.0/22
gateway: 172.29.241.1
- network:
container_bridge: "br-vxlan"
container_type: "veth"
container_interface: "eth10"
ip_from_q: "pod3_tunnel"
address_prefix: "tunnel"
type: "vxlan"
range: "1:1000"
net_name: "vxlan"
group_binds:
- neutron_linuxbridge_agent
reference_group: "pod3_hosts"
# Containers in pod3 need routes to the tunnel networks of other pods
static_routes:
# Route to tunnel networks
- cidr: 172.29.240.0/22
gateway: 172.29.242.1
- network:
container_bridge: "br-vxlan"
container_type: "veth"
container_interface: "eth10"
ip_from_q: "pod4_tunnel"
address_prefix: "tunnel"
type: "vxlan"
range: "1:1000"
net_name: "vxlan"
group_binds:
- neutron_linuxbridge_agent
reference_group: "pod4_hosts"
# Containers in pod4 need routes to the tunnel networks of other pods
static_routes:
# Route to tunnel networks
- cidr: 172.29.240.0/22
gateway: 172.29.243.1
- network:
container_bridge: "br-vlan"
container_type: "veth"
container_interface: "eth12"
host_bind_override: "eth12"
type: "flat"
net_name: "physnet2"
group_binds:
- neutron_linuxbridge_agent
- network:
container_bridge: "br-vlan"
container_type: "veth"
container_interface: "eth11"
type: "vlan"
range: "101:200,301:400"
net_name: "physnet1"
group_binds:
- neutron_linuxbridge_agent
- network:
container_bridge: "br-storage"
container_type: "veth"
container_interface: "eth2"
ip_from_q: "pod1_storage"
address_prefix: "storage"
type: "raw"
group_binds:
- glance_api
- cinder_api
- cinder_volume
- nova_compute
reference_group: "pod1_hosts"
# Containers in pod1 need routes to the storage networks of other pods
static_routes:
# Route to storage networks
- cidr: 172.29.244.0/22
gateway: 172.29.244.1
- network:
container_bridge: "br-storage"
container_type: "veth"
container_interface: "eth2"
ip_from_q: "pod2_storage"
address_prefix: "storage"
type: "raw"
group_binds:
- glance_api
- cinder_api
- cinder_volume
- nova_compute
reference_group: "pod2_hosts"
# Containers in pod2 need routes to the storage networks of other pods
static_routes:
# Route to storage networks
- cidr: 172.29.244.0/22
gateway: 172.29.245.1
- network:
container_bridge: "br-storage"
container_type: "veth"
container_interface: "eth2"
ip_from_q: "pod3_storage"
address_prefix: "storage"
type: "raw"
group_binds:
- glance_api
- cinder_api
- cinder_volume
- nova_compute
reference_group: "pod3_hosts"
# Containers in pod3 need routes to the storage networks of other pods
static_routes:
# Route to storage networks
- cidr: 172.29.244.0/22
gateway: 172.29.246.1
- network:
container_bridge: "br-storage"
container_type: "veth"
container_interface: "eth2"
ip_from_q: "pod4_storage"
address_prefix: "storage"
type: "raw"
group_binds:
- glance_api
- cinder_api
- cinder_volume
- nova_compute
reference_group: "pod4_hosts"
# Containers in pod4 need routes to the storage networks of other pods
static_routes:
# Route to storage networks
- cidr: 172.29.244.0/22
gateway: 172.29.247.1
###
### Infrastructure
###
pod1_hosts: &pod1
infra1:
ip: 172.29.236.10
pod2_hosts: &pod2
infra2:
ip: 172.29.239.10
pod3_hosts: &pod3
infra3:
ip: 172.29.242.10
pod4_hosts: &pod4
compute1:
ip: 172.29.245.10
compute2:
ip: 172.29.245.11
# galera, memcache, rabbitmq, utility
shared-infra_hosts: &controllers
<<: *pod1
<<: *pod2
<<: *pod3
# repository (apt cache, python packages, etc)
repo-infra_hosts: *controllers
# load balancer
# Ideally the load balancer should not use the Infrastructure hosts.
# Dedicated hardware is best for improved performance and security.
load_balancer_hosts: *controllers
###
### OpenStack
###
# keystone
identity_hosts: *controllers
# cinder api services
storage-infra_hosts: *controllers
# glance
# The settings here are repeated for each infra host.
# They could instead be applied as global settings in
# user_variables, but are left here to illustrate that
# each container could have different storage targets.
image_hosts:
infra1:
ip: 172.29.236.11
container_vars:
limit_container_types: glance
glance_remote_client:
- what: "172.29.244.15:/images"
where: "/var/lib/glance/images"
type: "nfs"
options: "_netdev,auto"
infra2:
ip: 172.29.236.12
container_vars:
limit_container_types: glance
glance_remote_client:
- what: "172.29.244.15:/images"
where: "/var/lib/glance/images"
type: "nfs"
options: "_netdev,auto"
infra3:
ip: 172.29.236.13
container_vars:
limit_container_types: glance
glance_remote_client:
- what: "172.29.244.15:/images"
where: "/var/lib/glance/images"
type: "nfs"
options: "_netdev,auto"
# nova api, conductor, etc services
compute-infra_hosts: *controllers
# heat
orchestration_hosts: *controllers
# horizon
dashboard_hosts: *controllers
# neutron server, agents (L3, etc)
network_hosts: *controllers
# ceilometer (telemetry data collection)
metering-infra_hosts: *controllers
# aodh (telemetry alarm service)
metering-alarm_hosts: *controllers
# gnocchi (telemetry metrics storage)
metrics_hosts: *controllers
# nova hypervisors
compute_hosts: *pod4
# ceilometer compute agent (telemetry data collection)
metering-compute_hosts: *pod4
# cinder volume hosts (NFS-backed)
# The settings here are repeated for each infra host.
# They could instead be applied as global settings in
# user_variables, but are left here to illustrate that
# each container could have different storage targets.
storage_hosts:
infra1:
ip: 172.29.236.11
container_vars:
cinder_backends:
limit_container_types: cinder_volume
nfs_volume:
volume_backend_name: NFS_VOLUME1
volume_driver: cinder.volume.drivers.nfs.NfsDriver
nfs_mount_options: "rsize=65535,wsize=65535,timeo=1200,actimeo=120"
nfs_shares_config: /etc/cinder/nfs_shares
shares:
- ip: "172.29.244.15"
share: "/vol/cinder"
infra2:
ip: 172.29.236.12
container_vars:
cinder_backends:
limit_container_types: cinder_volume
nfs_volume:
volume_backend_name: NFS_VOLUME1
volume_driver: cinder.volume.drivers.nfs.NfsDriver
nfs_mount_options: "rsize=65535,wsize=65535,timeo=1200,actimeo=120"
nfs_shares_config: /etc/cinder/nfs_shares
shares:
- ip: "172.29.244.15"
share: "/vol/cinder"
infra3:
ip: 172.29.236.13
container_vars:
cinder_backends:
limit_container_types: cinder_volume
nfs_volume:
volume_backend_name: NFS_VOLUME1
volume_driver: cinder.volume.drivers.nfs.NfsDriver
nfs_mount_options: "rsize=65535,wsize=65535,timeo=1200,actimeo=120"
nfs_shares_config: /etc/cinder/nfs_shares
shares:
- ip: "172.29.244.15"
share: "/vol/cinder"
Kustomisasi lingkungan¶
File yang disebarkan secara opsional di /etc/openstack_deploy/env.d
memungkinkan kustomisasi grup Ansible. Ini memungkinkan deployer untuk mengatur apakah layanan akan berjalan dalam container (default), atau pada host (on metal).
Untuk lingkungan ini, cinder-volume
berjalan dalam container di host infrastruktur. Untuk mencapainya, terapkan /etc/openstack_deploy/env.d/cinder.yml
dengan konten berikut:
---
# This file contains an example to show how to set
# the cinder-volume service to run in a container.
#
# Important note:
# When using LVM or any iSCSI-based cinder backends, such as NetApp with
# iSCSI protocol, the cinder-volume service *must* run on metal.
# Reference: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1226855
container_skel:
cinder_volumes_container:
properties:
is_metal: false
You can also declare a custom group for each pod that will also include all containers from hosts that belong to this pod. This might be handy if you want to define some variable for all hosts in the pod using group_variables.
For that create /etc/openstack_deploy/env.d/pod.yml
with the following content:
---
component_skel:
pod1_containers:
belongs_to:
- pod1_all
pod1_hosts:
belongs_to:
- pod1_all
pod2_containers:
belongs_to:
- pod2_all
pod2_hosts:
belongs_to:
- pod2_all
pod3_containers:
belongs_to:
- pod3_all
pod3_hosts:
belongs_to:
- pod3_all
pod4_containers:
belongs_to:
- pod3_all
pod4_hosts:
belongs_to:
- pod3_all
container_skel:
pod1_containers:
properties:
is_nest: True
pod2_containers:
properties:
is_nest: True
pod3_containers:
properties:
is_nest: True
pod4_containers:
properties:
is_nest: True
Above example will create following groups:
podN_hosts
which will contain only bare metal nodes
podN_containers
that will contain all containers that are spawned onbare metal nodes, that are part of the pod.
podN_all
that will contain podN_hosts and podN_containers members
User variables (variabel pengguna)¶
File /etc/openstack_deploy/user_variables.yml
mendefinisikan global override untuk variabel default.
Untuk lingkungan ini, terapkan penyeimbang beban pada host infrastruktur. Pastikan keepalived juga dikonfigurasi dengan HAProxy di /etc/openstack_deploy/user_variables.yml
dengan konten berikut.
---
# This file contains an example of the global variable overrides
# which may need to be set for a production environment.
# These variables must be defined when external_lb_vip_address or
# internal_lb_vip_address is set to FQDN.
## Load Balancer Configuration (haproxy/keepalived)
haproxy_keepalived_external_vip_cidr: "<external_vip_address>/<netmask>"
haproxy_keepalived_internal_vip_cidr: "172.29.236.9/32"
haproxy_keepalived_external_interface: ens2
haproxy_keepalived_internal_interface: br-mgmt