Atom feed of this document
  
Juno -  Juno -  Juno -  Juno -  Juno -  Juno -  Juno -  Juno - 
 NetApp iSCSI configuration for E-Series

The NetApp iSCSI configuration for E-Series is an interface from OpenStack to E-Series storage systems for provisioning and managing the SAN block storage entity; that is, a NetApp LUN which can be accessed using the iSCSI protocol.

The iSCSI configuration for E-Series is an interface from OpenStack Block Storage to the E-Series proxy instance and as such requires the deployment of the proxy instance in order to achieve the desired functionality. The driver uses REST APIs to interact with the E-Series proxy instance, which in turn interacts directly with the E-Series controllers.

The use of multipath and DM-MP are required when using the OpenStack Block Storage driver for E-Series. In order for OpenStack Block Storage and OpenStack Compute to take advantage of multiple paths, the following configuration options must be correctly configured:

  • The use_multipath_for_image_xfer option should be set to True in the cinder.conf file within the driver-specific stanza (for example, [myDriver]).

  • The iscsi_use_multipath option should be set to True in the nova.conf file within the [libvirt] stanza.

 Configuration options for E-Series storage family with iSCSI protocol

Configure the volume driver, storage family, and storage protocol to the NetApp unified driver, E-Series, and iSCSI respectively by setting the volume_driver, netapp_storage_family and netapp_storage_protocol options in cinder.conf as follows:

volume_driver = cinder.volume.drivers.netapp.common.NetAppDriver
netapp_storage_family = eseries
netapp_storage_protocol = iscsi
netapp_server_hostname = myhostname
netapp_server_port = 80
netapp_login = username
netapp_password = password
netapp_controller_ips = 1.2.3.4,5.6.7.8
netapp_sa_password = arrayPassword
netapp_storage_pools = pool1,pool2
use_multipath_for_image_xfer = True
[Note]Note

To use the E-Series driver, you must override the default value of netapp_storage_family with eseries.

[Note]Note

To use the iSCSI protocol, you must override the default value of netapp_storage_protocol with iscsi.

Table 1.22. Description of NetApp E-Series driver configuration options
Configuration option = Default value Description
[DEFAULT]
netapp_controller_ips = None (StrOpt) This option is only utilized when the storage family is configured to eseries. This option is used to restrict provisioning to the specified controllers. Specify the value of this option to be a comma separated list of controller hostnames or IP addresses to be used for provisioning.
netapp_eseries_host_type = linux_dm_mp (StrOpt) This option is used to define how the controllers in the E-Series storage array will work with the particular operating system on the hosts that are connected to it.
netapp_login = None (StrOpt) Administrative user account name used to access the storage system or proxy server.
netapp_password = None (StrOpt) Password for the administrative user account specified in the netapp_login option.
netapp_sa_password = None (StrOpt) Password for the NetApp E-Series storage array.
netapp_server_hostname = None (StrOpt) The hostname (or IP address) for the storage system or proxy server.
netapp_server_port = None (IntOpt) The TCP port to use for communication with the storage system or proxy server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS.
netapp_storage_family = ontap_cluster (StrOpt) The storage family type used on the storage system; valid values are ontap_7mode for using Data ONTAP operating in 7-Mode, ontap_cluster for using clustered Data ONTAP, or eseries for using E-Series.
netapp_storage_pools = None (StrOpt) This option is used to restrict provisioning to the specified storage pools. Only dynamic disk pools are currently supported. Specify the value of this option to be a comma separated list of disk pool names to be used for provisioning.
netapp_transport_type = http (StrOpt) The transport protocol used when communicating with the storage system or proxy server. Valid values are http or https.
netapp_webservice_path = /devmgr/v2 (StrOpt) This option is used to specify the path to the E-Series proxy application on a proxy server. The value is combined with the value of the netapp_transport_type, netapp_server_hostname, and netapp_server_port options to create the URL used by the driver to connect to the proxy application.

[Tip]Tip

For more information on these options and other deployment and operational scenarios, visit the NetApp OpenStack Deployment and Operations Guide.

Questions? Discuss on ask.openstack.org
Found an error? Report a bug against this page

loading table of contents...