Atom feed of this document
  
Icehouse -  Icehouse -  Icehouse -  Icehouse -  Icehouse -  Icehouse -  Icehouse -  Icehouse - 

 glance-api.conf

The configuration file for the Image Service API is found in the glance-api.conf file.

This file must be modified after installation.

[DEFAULT]
# Show more verbose log output (sets INFO log level output)
#verbose = False

# Show debugging output in logs (sets DEBUG log level output)
#debug = False

# Which backend scheme should Glance use by default is not specified
# in a request to add a new image to Glance? Known schemes are determined
# by the known_stores option below.
# Default: 'file'
default_store = file

# List of which store classes and store class locations are
# currently known to glance at startup.
# Existing but disabled stores:
#      glance.store.rbd.Store,
#      glance.store.s3.Store,
#      glance.store.swift.Store,
#      glance.store.sheepdog.Store,
#      glance.store.cinder.Store,
#      glance.store.gridfs.Store,
#      glance.store.vmware_datastore.Store,
#known_stores = glance.store.filesystem.Store,
#               glance.store.http.Store


# Maximum image size (in bytes) that may be uploaded through the
# Glance API server. Defaults to 1 TB.
# WARNING: this value should only be increased after careful consideration
# and must be set to a value under 8 EB (9223372036854775808).
#image_size_cap = 1099511627776

# Address to bind the API server
bind_host = 0.0.0.0

# Port the bind the API server to
bind_port = 9292

# Log to this file. Make sure you do not set the same log file for both the API
# and registry servers!
#
# If `log_file` is omitted and `use_syslog` is false, then log messages are
# sent to stdout as a fallback.
log_file = /var/log/glance/api.log

# Backlog requests when creating socket
backlog = 4096

# TCP_KEEPIDLE value in seconds when creating socket.
# Not supported on OS X.
#tcp_keepidle = 600

# API to use for accessing data. Default value points to sqlalchemy
# package, it is also possible to use: glance.db.registry.api
# data_api = glance.db.sqlalchemy.api

# Number of Glance API worker processes to start.
# On machines with more than one CPU increasing this value
# may improve performance (especially if using SSL with
# compression turned on). It is typically recommended to set
# this value to the number of CPUs present on your machine.
workers = 1

# Maximum line size of message headers to be accepted.
# max_header_line may need to be increased when using large tokens
# (typically those generated by the Keystone v3 API with big service
# catalogs)
# max_header_line = 16384

# Role used to identify an authenticated user as administrator
#admin_role = admin

# Allow unauthenticated users to access the API with read-only
# privileges. This only applies when using ContextMiddleware.
#allow_anonymous_access = False

# Allow access to version 1 of glance api
#enable_v1_api = True

# Allow access to version 2 of glance api
#enable_v2_api = True

# Return the URL that references where the data is stored on
# the backend storage system.  For example, if using the
# file system store a URL of 'file:///path/to/image' will
# be returned to the user in the 'direct_url' meta-data field.
# The default value is false.
#show_image_direct_url = False

# Send headers containing user and tenant information when making requests to
# the v1 glance registry. This allows the registry to function as if a user is
# authenticated without the need to authenticate a user itself using the
# auth_token middleware.
# The default value is false.
#send_identity_headers = False

# Supported values for the 'container_format' image attribute
#container_formats=ami,ari,aki,bare,ovf,ova

# Supported values for the 'disk_format' image attribute
#disk_formats=ami,ari,aki,vhd,vmdk,raw,qcow2,vdi,iso

# Directory to use for lock files. Default to a temp directory
# (string value). This setting needs to be the same for both
# glance-scrubber and glance-api.
#lock_path=<None>

# Property Protections config file
# This file contains the rules for property protections and the roles/policies
# associated with it.
# If this config value is not specified, by default, property protections
# won't be enforced.
# If a value is specified and the file is not found, then the glance-api
# service will not start.
#property_protection_file =

# Specify whether 'roles' or 'policies' are used in the
# property_protection_file.
# The default value for property_protection_rule_format is 'roles'.
#property_protection_rule_format = roles

# Specifies how long (in hours) a task is supposed to live in the tasks DB
# after succeeding or failing before getting soft-deleted.
# The default value for task_time_to_live is 48 hours.
# task_time_to_live = 48

# This value sets what strategy will be used to determine the image location
# order. Currently two strategies are packaged with Glance 'location_order'
# and 'store_type'.
#location_strategy = location_order

# ================= Syslog Options ============================

# Send logs to syslog (/dev/log) instead of to file specified
# by `log_file`
#use_syslog = False

# Facility to use. If unset defaults to LOG_USER.
#syslog_log_facility = LOG_LOCAL0

# ================= SSL Options ===============================

# Certificate file to use when starting API server securely
#cert_file = /path/to/certfile

# Private key file to use when starting API server securely
#key_file = /path/to/keyfile

# CA certificate file to use to verify connecting clients
#ca_file = /path/to/cafile

# ================= Security Options ==========================

# AES key for encrypting store 'location' metadata, including
# -- if used -- Swift or S3 credentials
# Should be set to a random string of length 16, 24 or 32 bytes
#metadata_encryption_key = <16, 24 or 32 char registry metadata key>

# ============ Registry Options ===============================

# Address to find the registry server
registry_host = 0.0.0.0

# Port the registry server is listening on
registry_port = 9191

# What protocol to use when connecting to the registry server?
# Set to https for secure HTTP communication
registry_client_protocol = http

# The path to the key file to use in SSL connections to the
# registry server, if any. Alternately, you may set the
# GLANCE_CLIENT_KEY_FILE environ variable to a filepath of the key file
#registry_client_key_file = /path/to/key/file

# The path to the cert file to use in SSL connections to the
# registry server, if any. Alternately, you may set the
# GLANCE_CLIENT_CERT_FILE environ variable to a filepath of the cert file
#registry_client_cert_file = /path/to/cert/file

# The path to the certifying authority cert file to use in SSL connections
# to the registry server, if any. Alternately, you may set the
# GLANCE_CLIENT_CA_FILE environ variable to a filepath of the CA cert file
#registry_client_ca_file = /path/to/ca/file

# When using SSL in connections to the registry server, do not require
# validation via a certifying authority. This is the registry's equivalent of
# specifying --insecure on the command line using glanceclient for the API
# Default: False
#registry_client_insecure = False

# The period of time, in seconds, that the API server will wait for a registry
# request to complete. A value of '0' implies no timeout.
# Default: 600
#registry_client_timeout = 600

# Whether to automatically create the database tables.
# Default: False
#db_auto_create = False

# Enable DEBUG log messages from sqlalchemy which prints every database
# query and response.
# Default: False
#sqlalchemy_debug = True

# Pass the user's token through for API requests to the registry.
# Default: True
#use_user_token = True

# If 'use_user_token' is not in effect then admin credentials
# can be specified. Requests to the registry on behalf of
# the API will use these credentials.
# Admin user name
#admin_user = None
# Admin password
#admin_password = None
# Admin tenant name
#admin_tenant_name = None
# Keystone endpoint
#auth_url = None
# Keystone region
#auth_region = None
# Auth strategy
#auth_strategy = keystone

# ============ Notification System Options =====================

# Notifications can be sent when images are create, updated or deleted.
# There are three methods of sending notifications, logging (via the
# log_file directive), rabbit (via a rabbitmq queue), qpid (via a Qpid
# message queue), or noop (no notifications sent, the default)
# NOTE: THIS CONFIGURATION OPTION HAS BEEN DEPRECATED IN FAVOR OF `notification_driver`
# notifier_strategy = default

# Driver or drivers to handle sending notifications
# notification_driver = noop

# Default publisher_id for outgoing notifications.
# default_publisher_id = image.localhost

# Configuration options if sending notifications via rabbitmq (these are
# the defaults)
rabbit_host = localhost
rabbit_port = 5672
rabbit_use_ssl = false
rabbit_userid = guest
rabbit_password = guest
rabbit_virtual_host = /
rabbit_notification_exchange = glance
rabbit_notification_topic = notifications
rabbit_durable_queues = False

# Configuration options if sending notifications via Qpid (these are
# the defaults)
qpid_notification_exchange = glance
qpid_notification_topic = notifications
qpid_hostname = localhost
qpid_port = 5672
qpid_username =
qpid_password =
qpid_sasl_mechanisms =
qpid_reconnect_timeout = 0
qpid_reconnect_limit = 0
qpid_reconnect_interval_min = 0
qpid_reconnect_interval_max = 0
qpid_reconnect_interval = 0
qpid_heartbeat = 5
# Set to 'ssl' to enable SSL
qpid_protocol = tcp
qpid_tcp_nodelay = True

# ============ Filesystem Store Options ========================

# Directory that the Filesystem backend store
# writes image data to
filesystem_store_datadir = /var/lib/glance/images/

# A list of directories where image data can be stored.
# This option may be specified multiple times for specifying multiple store
# directories. Either one of filesystem_store_datadirs or
# filesystem_store_datadir option is required. A priority number may be given
# after each directory entry, separated by a ":".
# When adding an image, the highest priority directory will be selected, unless
# there is not enough space available in cases where the image size is already
# known. If no priority is given, it is assumed to be zero and the directory
# will be considered for selection last. If multiple directories have the same
# priority, then the one with the most free space available is selected.
# If same store is specified multiple times then BadStoreConfiguration
# exception will be raised.
#filesystem_store_datadirs = /var/lib/glance/images/:1

# A path to a JSON file that contains metadata describing the storage
# system.  When show_multiple_locations is True the information in this
# file will be returned with any location that is contained in this
# store.
#filesystem_store_metadata_file = None

# ============ Swift Store Options =============================

# Version of the authentication service to use
# Valid versions are '2' for keystone and '1' for swauth and rackspace
swift_store_auth_version = 2

# Address where the Swift authentication service lives
# Valid schemes are 'http://' and 'https://'
# If no scheme specified,  default to 'https://'
# For swauth, use something like '127.0.0.1:8080/v1.0/'
swift_store_auth_address = 127.0.0.1:5000/v2.0/

# User to authenticate against the Swift authentication service
# If you use Swift authentication service, set it to 'account':'user'
# where 'account' is a Swift storage account and 'user'
# is a user in that account
swift_store_user = jdoe:jdoe

# Auth key for the user authenticating against the
# Swift authentication service
swift_store_key = a86850deb2742ec3cb41518e26aa2d89

# Container within the account that the account should use
# for storing images in Swift
swift_store_container = glance

# Do we create the container if it does not exist?
swift_store_create_container_on_put = False

# What size, in MB, should Glance start chunking image files
# and do a large object manifest in Swift? By default, this is
# the maximum object size in Swift, which is 5GB
swift_store_large_object_size = 5120

# When doing a large object manifest, what size, in MB, should
# Glance write chunks to Swift? This amount of data is written
# to a temporary disk buffer during the process of chunking
# the image file, and the default is 200MB
swift_store_large_object_chunk_size = 200

# Whether to use ServiceNET to communicate with the Swift storage servers.
# (If you aren't RACKSPACE, leave this False!)
#
# To use ServiceNET for authentication, prefix hostname of
# `swift_store_auth_address` with 'snet-'.
# Ex. https://example.com/v1.0/ -> https://snet-example.com/v1.0/
swift_enable_snet = False

# If set to True enables multi-tenant storage mode which causes Glance images
# to be stored in tenant specific Swift accounts.
#swift_store_multi_tenant = False

# A list of swift ACL strings that will be applied as both read and
# write ACLs to the containers created by Glance in multi-tenant
# mode. This grants the specified tenants/users read and write access
# to all newly created image objects. The standard swift ACL string
# formats are allowed, including:
# <tenant_id>:<username>
# <tenant_name>:<username>
# *:<username>
# Multiple ACLs can be combined using a comma separated list, for
# example: swift_store_admin_tenants = service:glance,*:admin
#swift_store_admin_tenants =

# The region of the swift endpoint to be used for single tenant. This setting
# is only necessary if the tenant has multiple swift endpoints.
#swift_store_region =

# If set to False, disables SSL layer compression of https swift requests.
# Setting to 'False' may improve performance for images which are already
# in a compressed format, eg qcow2. If set to True, enables SSL layer
# compression (provided it is supported by the target swift proxy).
#swift_store_ssl_compression = True

# The number of times a Swift download will be retried before the
# request fails
#swift_store_retry_get_count = 0

# ============ S3 Store Options =============================

# Address where the S3 authentication service lives
# Valid schemes are 'http://' and 'https://'
# If no scheme specified,  default to 'http://'
s3_store_host = 127.0.0.1:8080/v1.0/

# User to authenticate against the S3 authentication service
s3_store_access_key = <20-char AWS access key>

# Auth key for the user authenticating against the
# S3 authentication service
s3_store_secret_key = <40-char AWS secret key>

# Container within the account that the account should use
# for storing images in S3. Note that S3 has a flat namespace,
# so you need a unique bucket name for your glance images. An
# easy way to do this is append your AWS access key to "glance".
# S3 buckets in AWS *must* be lowercased, so remember to lowercase
# your AWS access key if you use it in your bucket name below!
s3_store_bucket = <lowercased 20-char aws access key>glance

# Do we create the bucket if it does not exist?
s3_store_create_bucket_on_put = False

# When sending images to S3, the data will first be written to a
# temporary buffer on disk. By default the platform's temporary directory
# will be used. If required, an alternative directory can be specified here.
#s3_store_object_buffer_dir = /path/to/dir

# When forming a bucket url, boto will either set the bucket name as the
# subdomain or as the first token of the path. Amazon's S3 service will
# accept it as the subdomain, but Swift's S3 middleware requires it be
# in the path. Set this to 'path' or 'subdomain' - defaults to 'subdomain'.
#s3_store_bucket_url_format = subdomain

# ============ RBD Store Options =============================

# Ceph configuration file path
# If using cephx authentication, this file should
# include a reference to the right keyring
# in a client.<USER> section
#rbd_store_ceph_conf = /etc/ceph/ceph.conf

# RADOS user to authenticate as (only applicable if using cephx)
# If <None>, a default will be chosen based on the client. section
# in rbd_store_ceph_conf
#rbd_store_user = <None>

# RADOS pool in which images are stored
#rbd_store_pool = images

# RADOS images will be chunked into objects of this size (in megabytes).
# For best performance, this should be a power of two
#rbd_store_chunk_size = 8

# ============ Sheepdog Store Options =============================

sheepdog_store_address = localhost

sheepdog_store_port = 7000

# Images will be chunked into objects of this size (in megabytes).
# For best performance, this should be a power of two
sheepdog_store_chunk_size = 64

# ============ Cinder Store Options ===============================

# Info to match when looking for cinder in the service catalog
# Format is : separated values of the form:
# <service_type>:<service_name>:<endpoint_type> (string value)
#cinder_catalog_info = volume:cinder:publicURL

# Override service catalog lookup with template for cinder endpoint
# e.g. http://localhost:8776/v1/%(project_id)s (string value)
#cinder_endpoint_template = <None>

# Region name of this node (string value)
#os_region_name = <None>

# Location of ca certicates file to use for cinder client requests
# (string value)
#cinder_ca_certificates_file = <None>

# Number of cinderclient retries on failed http calls (integer value)
#cinder_http_retries = 3

# Allow to perform insecure SSL requests to cinder (boolean value)
#cinder_api_insecure = False

# ============ VMware Datastore Store Options =====================

# ESX/ESXi or vCenter Server target system.
# The server value can be an IP address or a DNS name
# e.g. 127.0.0.1, 127.0.0.1:443, www.vmware-infra.com
#vmware_server_host = <None>

# Server username (string value)
#vmware_server_username = <None>

# Server password (string value)
#vmware_server_password = <None>

# Inventory path to a datacenter (string value)
# Value optional when vmware_server_ip is an ESX/ESXi host: if specified
# should be `ha-datacenter`.
#vmware_datacenter_path = <None>

# Datastore associated with the datacenter (string value)
#vmware_datastore_name = <None>

# The number of times we retry on failures
# e.g., socket error, etc (integer value)
#vmware_api_retry_count = 10

# The interval used for polling remote tasks
# invoked on VMware ESX/VC server in seconds (integer value)
#vmware_task_poll_interval = 5

# Absolute path of the folder containing the images in the datastore
# (string value)
#vmware_store_image_dir = /openstack_glance

# Allow to perform insecure SSL requests to the target system (boolean value)
#vmware_api_insecure = False

# ============ Delayed Delete Options =============================

# Turn on/off delayed delete
delayed_delete = False

# Delayed delete time in seconds
scrub_time = 43200

# Directory that the scrubber will use to remind itself of what to delete
# Make sure this is also set in glance-scrubber.conf
scrubber_datadir = /var/lib/glance/scrubber

# =============== Quota Options ==================================

# The maximum number of image members allowed per image
#image_member_quota = 128

# The maximum number of image properties allowed per image
#image_property_quota = 128

# The maximum number of tags allowed per image
#image_tag_quota = 128

# The maximum number of locations allowed per image
#image_location_quota = 10

# Set a system wide quota for every user.  This value is the total number
# of bytes that a user can use across all storage systems.  A value of
# 0 means unlimited.
#user_storage_quota = 0

# =============== Image Cache Options =============================

# Base directory that the Image Cache uses
image_cache_dir = /var/lib/glance/image-cache/

# =============== Manager Options =================================

# DEPRECATED. TO BE REMOVED IN THE JUNO RELEASE.
# Whether or not to enforce that all DB tables have charset utf8.
# If your database tables do not have charset utf8 you will
# need to convert before this option is removed. This option is
# only relevant if your database engine is MySQL.
#db_enforce_mysql_charset = True

# =============== Database Options =================================

[database]
# The file name to use with SQLite (string value)
#sqlite_db = glance.sqlite

# If True, SQLite uses synchronous mode (boolean value)
#sqlite_synchronous = True

# The backend to use for db (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy

# The SQLAlchemy connection string used to connect to the
# database (string value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>

# The SQL mode to be used for MySQL sessions. This option,
# including the default, overrides any server-set SQL mode. To
# use whatever SQL mode is set by the server configuration,
# set this to no value. Example: mysql_sql_mode= (string
# value)
#mysql_sql_mode = TRADITIONAL

# Timeout before idle sql connections are reaped (integer
# value)
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
# Deprecated group/name - [DATABASE]/sql_idle_timeout
# Deprecated group/name - [sql]/idle_timeout
#idle_timeout = 3600

# Minimum number of SQL connections to keep open in a pool
# (integer value)
# Deprecated group/name - [DEFAULT]/sql_min_pool_size
# Deprecated group/name - [DATABASE]/sql_min_pool_size
#min_pool_size = 1

# Maximum number of SQL connections to keep open in a pool
# (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
# Deprecated group/name - [DATABASE]/sql_max_pool_size
#max_pool_size = <None>

# Maximum db connection retries during startup. (setting -1
# implies an infinite retry count) (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10

# Interval between retries of opening a sql connection
# (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10

# If set, use this value for max_overflow with sqlalchemy
# (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = <None>

# Verbosity of SQL debugging information. 0=None,
# 100=Everything (integer value)
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0

# Add python stack traces to SQL as comment strings (boolean
# value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = False

# If set, use this value for pool_timeout with sqlalchemy
# (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>

# Enable the experimental use of database reconnect on
# connection lost (boolean value)
#use_db_reconnect = False

# seconds between db connection retries (integer value)
#db_retry_interval = 1

# Whether to increase interval between db connection retries,
# up to db_max_retry_interval (boolean value)
#db_inc_retry_interval = True

# max seconds between db connection retries, if
# db_inc_retry_interval is enabled (integer value)
#db_max_retry_interval = 10

# maximum db connection retries before error is raised.
# (setting -1 implies an infinite retry count) (integer value)
#db_max_retries = 20

[keystone_authtoken]
auth_host = 127.0.0.1
auth_port = 35357
auth_protocol = http
admin_tenant_name = %SERVICE_TENANT_NAME%
admin_user = %SERVICE_USER%
admin_password = %SERVICE_PASSWORD%

[paste_deploy]
# Name of the paste configuration file that defines the available pipelines
#config_file = glance-api-paste.ini

# Partial name of a pipeline in your paste configuration file with the
# service name removed. For example, if your paste section name is
# [pipeline:glance-api-keystone], you would configure the flavor below
# as 'keystone'.
#flavor=

[store_type_location_strategy]
# The scheme list to use to get store preference order. The scheme must be
# registered by one of the stores defined by the 'known_stores' config option.
# This option will be applied when you using 'store_type' option as image
# location strategy defined by the 'location_strategy' config option.
#store_type_preference =
Questions? Discuss on ask.openstack.org
Found an error? Report a bug against this page

loading table of contents...